GPT Alat
GPT Alat
5+1 liquid
METHOD PROCEDURES
Reagents can be used manually (see method below) and
Optimized, UV, Kinetic. IFCC
on most analyzers. Applications are available on request.
PRINCIPLE
Wavelength : 340 nm, Hg 334 nm, Hg 365 nm
Kinetic determination of Alaninaminotransferase
Temperature : 37°C,
(ALAT) based upon IFCC recommendations:
Cuvette : 1 cm light path
Read against air.
L-Alanin+ 2-Oxoglutarat < ALAT > L-Glutamat + Pyruvat
Pyruvat + NADH + H +
< LDH > L-Lactat + NAD+ • Sample Start Procedure / Monoreagent
ALAT = Alaninaminotransferase Working reagent : 1 mL
LDH = Lactate dehydrogenase
Sample : 100 µL
R1 : 1 mL
- PRECAUTIONS Sample : 100 µL
- For in vitro diagnostic use only. Mix and wait 1 minute
- The reagents contain < 0,95g/L sodium azide.
Avoid contact with skin and/or mucous R2 : 200 µL
membranes ! Mix and after a 1 minute incubation, measure the
- Use clean or single use glass/plastic material change of absorbance per minute (∆A/min) during
only to avoid contaminations. 3 minutes.
STABILITY OF REAGENTS
When stored at 2 – 8 °C and protected from light, the
CALCULATION FACTORS
reagents are stable until the expiry date printed on
Monoreagent Start reagent
the labels. 340 nm : Activity (U/L) = ∆A/min. x 1 745 2064
334 nm : Activity (U/L) = ∆A/min. x 1 780 2103
PREPARATION OF WORKING REAGENT 365 nm : Activity (U/L) = ∆A/min. x 3 235 3824
- For the “Start Reagent-procedure”
reagents R1 and R2 are ready for use
- For the “Sample Start-procedure” (monoreagent) CALIBRATORS & CONTROLS
- mix R1 + R2 = 5 + 1 For the calibration of automated analyzers Inmesco
Stability : 1 month at 2 – 8 °C Multicalibrator Introcal is recommended, for quality
5 days at 18 – 25 °C control use Inmesco normal and abnormal control,
Intronorm I and Intronorm II.
SAMPLES
Serum free of hemolysis , plasma (EDTA/heparin)
- Correlation
A comparative study has been performed between Batch Code
the Inmesco method and another commercial
reagent on 30 human serum samples. The
parameters of linear regression are as follows: Use by
INTERFERENCES
-Ascorbic Acid: No interference until 30 mg/L
-Bilirubin: no interference up to 40 mg / dL