JEE

Arjuna JEE (2025)

Physics
DPP: 7
Circular Motion

Q1 A block is kept on a frictionless inclined surface

with angle of inclination α . The incline is given
an acceleration a to keep the block stationary.
Then a is equal to.

(A) 40 kg
(B) 160 kg
(C) 80 kg
(D) 50 kg

Q4 A truck starting from rest moves with an

(A) g acceleration of 5 m/s2 for 1sec and then moves
(B) g tan α
with constant velocity. The velocity w.r.t. ground
(C) g/ tan α
v/s time graph for block in truck is (Assume that
(D) g cosec α
block does not fall off the truck)
Q2 Inclined plane is moved towards right with an
acceleration of 5ms−2 as shown in figure. Find
force in newton which block of mass 5 kg exerts
on the incline plane. (All surfaces are smooth)

(A)

(A) 50 N
(B) 60 N
(C) 55 N
(B)
(D) 70 N

Q3 An elevator is accelerating upwards with

a acceleration of 6 m/s2 . Inside it a person of
mass 50 kg is standing on a weighing machine
which is kept on an inclined plane having angle
of inclination 60∘ . The reading of the weighing
machine is:

Android App | iOS App | PW Website

 JEE

(C) (A) N=m g cosθ

2
(B) g sin θ= vr cos θ
2
(C) N sin θ − mv = 0
r
(D) none of these

Q8 A satellite of mass m is revolving around the

(D) None of these earth of mass M in circular orbit of radius r. The
orbital velocity of the satellite will be
Q5 A lift starts moving down with 20 m/s2 . Then −−− −−−
(A) √ GM (B) √ Gm
which of the following is not true? r mr
−−− −−−
(C) √ Gm (D) √ mv2
Mr r

Q9 A uniform rod of mass m and length ℓ rotates in

a horizontal plane with an angular velocity ω
about a vertical axis passing through one end.
The tension in the rod at distance x from the axis
is:
(A) Acceleration of 5 kg block along incline is 15 (A) 12 mω2 x
2
m/s (B) 1 mω2 x
2

– 2 ℓ
(B) Normal force is 25√3 and acceleration is 5
(C) 1 mω2 ℓ (1 − x )
2 ℓ
m/s2 along incline 2
(D) 1 mω [ℓ2 −x ]2
(C) Normal force is zero 2 ℓ

(D) Acceleration of 5 kg is 20 m/s2 downwards Q10 A small mass of 10 g lies in a hemispherical bowl
of radius 0.5 m at a height of 0.1 m from the
Q6 Three identical particles are joined together by a
bottom of the bowl. The mass will be in
thread as shown in figure. All the three particles
equilibrium if the bowl rotates at an angular
are moving on a smooth horizontal plane about
speed of
point O. If the speed of the outermost particle is
v0, then the ratio of tensions in the three sections
of the string is: (Assume that the string remains
straight)

(A) 3 : 5 : 7 (B) 3 : 4 : 5
(C) 7 : 11 : 6 (D) 3 : 5 : 6
(A) 10 rad/s
Q7 A ball of mass ' 𝑚 ' is rotating in a circle of radius ' √3
–
𝑟 ' with speed 𝑣 inside a smooth cone as shown in (B) 10√3rad/s
figure. Let N be the normal reaction on the ball (C) 5rad/s
by the cone, then choose the correct option. (D) None of these

Android App | iOS App | PW Website

 JEE

Arjuna JEE (2025)

Physics
DPP: 6
Circular Motion
−−−−−
Q1 A car is moving on a plane inclined at 30∘ to the (C) √ 2h
g tan θ
horizontal with an acceleration of 10 m/s2 −−−−−
(D) √ 2h
parallel to the plane upward. A bob is suspended g cos2 θ
by a string from the roof. The angle in degrees
Q4 The elevator shown in figure is descending with
which the string makes with the vertical is
ms−2 . The mass of the block
an acceleration of 2
(Assume that the bob does not move relative to
A = 0.5 kg. The force exerted by the block A
car) [g = 10 m/s2 ]
on the block B is:
(A) 20∘
(B) 30∘
(C) 45∘
(D) 60∘

Q2 A body of mass m is placed over a smooth

inclined plane of inclination θ, which is placed
over a lift which is moving up with an
acceleration a0 . Base length of the inclined plane
is L. Calculate the velocity of the block with
respect to lift at the bottom, if it is allowed to
slide down from the top of the plane from rest. Take g = 10 m/s2
−−−−−−−−−−−−−
(A) √2 (a0 + g) L sin θ (A) 2 N
−−−−−−−−−−−−−
(B) √2 (a0 + g) L cos θ (B) 4 N
−−−−−−−−−−−−−
(C) √2 (a0 + g) L tan θ (C) 6 N
−−−−−−−−−−−−−
(D) √2 (a0 + g) L cot θ (D) 8 N

Q3 A wedge of height h is released from rest with a Q5 A block of mass m is in contact with the cart C
light particle P placed on it as shown. The as shown in the figure. The coefficient of static
wedge slides down an incline which makes an friction between the block and the cart is μ . The
angle θ with the horizontal. All the surfaces are acceleration a of the cart that will prevent the
smooth, P will reach the surface of the incline in block from falling satisfies:
time:

mg
(A) a > μ
−−−
2h−−
g
(A) √ (B) a > μm
g sin2 θ g
−−−− −−− (C) a≥
(B) √ 2h μ
g sin θ cos θ
(D)

Android App | iOS App | PW Website

 JEE
g
a< μ

Q6 A block of mass m is placed on a smooth wedge

of inclination θ. The whole system is accelerated
horizontally so that the block does not slip on
the wedge. The force exerted by the wedge on
the block will be ( g is acceleration due to
gravity)
(A) μg
(A) mg cos θ g
(B) μ
(B) mg sin θ m
(C) μg
(C) mg
(D) mg/ cos θ (D) μmg

Q7 A lift is moving down with acceleration a. A man Q10 A particle of mass 5 kg is resting on a smooth
in the lift drops a ball inside the lift. The wedge of angle inclination 45∘ as shown in the
acceleration of the ball as observed by the man figure. The wedge is given an acceleration a. The
in the lift and a man standing stationary on the minimum value of a for which the mass falls
ground are respectively freely is

(A) g, g (B) g − a, g − a
(C) g − a, g (D) a, g

Q8 A block is sliding along inclined plane as shown in

figure. If the acceleration of chamber is a as
(A) g
shown in the figure. The time required to cover a g
(B) 2
distance L along inclined plane is: g
(C)
√2
–
(D) √2g

−−−−2L
−−−−−
(A) √
g sin θ−a cos θ
−−−−2L −−−−−
(B) √
g sin θ−a sin θ
−−−−2L −−−−−
(C) √
g sin θ+a cos θ
−− −−
(D) √ 2L
g sin θ

Q9 In the given figure, a block always be in

equilibrium. If the wall moved towards right with
acceleration a, if μ is the coefficient of friction,
then minimum value of a is

Android App | iOS App | PW Website

 JEE

Arjuna JEE (2025)

Physics
DPP: 5
Circular Motion

Q1 A motor car is travelling at 30 m/s on a circular (A) tan−1 (1/4)

road of radius 500 m. It is increasing its speed at (B) tan−1 (1)
the rate of 2 m/s2 . Its net acceleration is (in (C) tan−1 (1/2)
m/s2 )- (D) tan−1 (2)
(A) 2 (B) 1.8
Q5 A block of mass M is situated on a smooth
(C) 2.7 (D) 0
horizontal frictionless table. A thread tied to the
Q2 A particle of mass m is fixed to one end of a block passes through a hole in the table and
light spring of force constant k and unstretched carries a mass m at its other end. If the length of
length ℓ. The system is rotated about the other the thread above the table is l , what should be
end of the spring with an angular velocity ω , in the value of m so that it may remain suspended
gravity free space. The increase in length of the at a constant height and the block M moves in a
spring will be circular path with an angular velocity ω on the
table?

2
(A) mω ℓ
k
2
(B) mω ℓ2
k−mω
2
(C) mω ℓ2
k+mω
(D) None of these
2
(A) Mlω
Q3 A stone of mass of 16 kg is attached to a string 2
g
(B) Mlω
144 m long and is whirled in a horizontal smooth 3g
2
surface. The maximum tension the string can (C) Mlω
5g
withstand is 16 newton. The maximum speed of (D) 2Mlω
2
g
revolution of the stone without breaking it, will
be: Q6 A stone of mass 0.5 kg tied with a string of
−1 length 1 metre is moving in a circular path with a
(A) 20 ms
(B) 16 ms−1 speed of 4m/sec. The tension acting on the
(C) 14 ms−1 string in Newton is
(D) 12 ms−1 (A) 2 (B) 8
(C) 0.2 (D) 0.8
Q4 A cyclist is moving on a circular track of radius
80 m with a velocity of 72 km/hr. He has to Q7 A car is moving on a circular level road of radius
lean from the vertical approximately through an of curvature 300 m. If the coefficient of friction
angle

Android App | iOS App | PW Website

 JEE

is 0.3 and acceleration due to gravity is 10 m/s2 .

The maximum speed the car can have is
(A) 30 km/h
(B) 81 km/h
(C) 108 km/h
(D) 162 km/h

Q8 A disc rotates at 60rev/min around a vertical

axis. A body lies on the disc at the distance of
20 cm from the axis of rotation. What should be
the minimum value of coefficient of friction
between the body and the disc, so that the body
will not slide off the disc
(A) 8π 2
(B) 0.8π 2
(C) 0.08π 2
(D) 0.008π 2

Q9 A road is banked at an angle of 30∘ to the

horizontal for negotiating a curve of radius
–
10√3 m . At what
velocity will a car experience no friction while
negotiating the curve?
(A) 54 km/hr
(B) 72 km/hr
(C) 36 km/hr
(D) 18 km/hr

Q10 A man is standing on a rough (μ = 0.5)

horizontal disc rotating with constant angular
velocity of 5rad/sec . At what distance from
centre should he stand so that he does not slip
on the disc?
(A) R ≤ 0.2 m
(B) R > 0.2 m
(C) R > 0.5 m
(D) R > 0.3 m

Android App | iOS App | PW Website

 JEE

Arjuna JEE (2025)

Physics
DPP: 4
Circular Motion

Q1 A motorcycle is going on an overbridge of radius

R. The driver maintains a constant speed. As the
motorcycle is ascending on the overbridge, the
normal force on it
(A) Increases
(B) Decreases
(C) Remains the same (D)
(D) Fluctuates

Q2 A point mass m is suspended from a light thread

of length l , fixed at O, is whirled in a horizontal
circle at constant speed as shown. From your
point of view, stationary with respect to the
mass, the forces on the mass are: Q3 A particle is moving in a vertical circle with
constant speed. The tensions in the string when
passing through two positions at angles 30∘ and
60∘ from vertical (lowest position) are T1 and T2
respectively. Then
(A) T1= T2
(B) T2 > T1
(C) T1 > T2
(D) Tension in the string always remains the same

Q4 Two spheres of equal masses are attached to a

(A)
string of length 2 m as shown in figure. The
string and the spheres are then whirled in a
horizontal circle about O at a constant rate. What
is the value of the ratio:
( )?
Tension in the string between P and Q
(B) Tension in the string between P and O

(C)

Android App | iOS App | PW Website

 JEE

(A) 12
(B) 23
(C) 32
(D) 2
(A) 35kN
Q5 A string of length L is fixed at one end and
(B) 30kN
carries a mass M at the other end. The string
(C) 25kN
makes 2/π revolutions per second around the
(D) 20kN
vertical axis through the fixed end as shown in
the figure, then tension in the string is Q8 The dumbell is placed on a frictionless horizontal
table. Sphere A is attached to a frictionless pivot
so that B can be made to rotate about A with
constant angular velocity. If B makes one
revolution in period P, the tension in the rod is

(A) ML
(B) 2ML
(C) 4ML
(D) 16ML
2
(A) 4π Md
2
Q6 A small mass of 10 g lies in a hemispherical bowl 2
P
(B) 8π Md
of radius 0.5 m at a height of 0.1 m from the 2
P
2
bottom of the bowl. The mass will be in (C) 4π Md
P
equilibrium if the bowl rotates at an angular (D) 2Md
P
speed of
Q9 If the radii of circular paths of two particles of
same masses are in the ratio of 1 : 2, then in
order to have same centripetal force, their
speeds should be in the ratio of :
(A) 1 :4
(B) 4 : 1
–
(C) 1 : √2
–
(D) √2 : 1
(A) 10 rad/s
√3 Q10 A car is negotiating a curved road of radius r . If
–
(B) 10√3rad/s the coefficient of friction between the tyres and
(C) 5rad/s the road is μ , the car will skid if its speed
(D) None of these exceeds:
(A) −−−
Q7 A car travelling on a smooth road passes through √μrg
−−−−
(B) √2μrg
a curved portion of the road in form of an arc, of −−−−
(C) √3μrg
circle of radius 10 m. If the mass of car is
(D) 2√− −−
μrg
500 kg, the reaction on car at lowest point P
where its speed is 20 m/s is

Android App | iOS App | PW Website

 JEE

Arjuna JEE (2025)

Physics
DPP: 2
Circular Motion

Q1 What is the value of linear velocity, if Q6 A particle is moving with constant angular
^ and r ⃗ = 5^i − 6^j + 6k
ω⃗ = 3^i − 4^j + k ^ acceleration =α in a circular path of radius
^ –
(A) 6^
i − 2^j + 3k √3 m . At t = 0, it was at rest and at t = 1sec ,
(B) 6^
i − 2^j + 8k^ the magnitude of its acceleration becomes
(C) 4^ ^ √–6 m/s2 , then α is:
i − 13^j + 6k
^ (A) 2 rad/s2
(D) −18^ i − 13^j + 2k –
(B) √3 rad/s2
– –
Q2 If |A ⃗ × B⃗ | = √3A ⃗ ⋅ B⃗ , then the value of (C) √2 rad/s2
|A ⃗ + B⃗ | is (D) 1 rad/s2
1/2
(A)
(A2 + B2 + AB
√3
) Q7 The angular speed of a fly wheel making 120

(B) A + B revolutions/minute is
– 1/2 (A) 2π rad/s
(C) (A2 + B2 + √3AB) 2
1/2 (B) 4π rad/s
(D) (A2 + B2 + AB) (C) π rad/s
(D) 4π rad/s
Q3 A flywheel rotates with a uniform angular
acceleration. Its angular velocity increases from Q8 The angular velocity of the second's needle in
20π rad/s to 40πrad/s in 10 seconds. How watch is:
many rotations did it make in this period? π
(A) 30
(A) 80 (B) 100
(B) 2π
(C) 120 (D) 150
(C) π
Q4 An Object follows a curved path. The following (D) 60
π
quantity may not remain constant during the
Q9 A fly wheel rotating at 600rev/min is brought
motion:
under uniform deceleration and stopped after 2
(A) Speed
minutes,then what is angular deceleration in
(B) Velocity
rad/sec2 ?
(C) Magnitude of centripetal force
(A) π6
(D) Magnitude of acceleration
(B) 10π
1
Q5 A particle moves along a circle of radius R with a (C) 12
constant angular speed ω .Its displacement (only (D) 300
magnitude) in time t will be
Q10 A particle moves in a circle describing equal
(A) ωt
angle in equal times, its velocity vector-
(B) 2R cos ωt
(A) Remains constant
(C) 2R sin ωt
(B) Change in magnitude
(D) 2R sin ωt
2 (C) Change in direction

Android App | iOS App | PW Website

 JEE

(D) Changes in magnitude and direction

Android App | iOS App | PW Website

 JEE

Arjuna JEE (2025)

Physics
DPP: 1
Circular Motion

Q1 If a vector A ⃗ is parallel to another vector B⃗ , then Q6 A vector A ⃗ points vertically upward and B⃗ points
the resultant of the vector A ⃗ × B⃗ will be equal towards north. The vector product A ⃗ × B⃗ is
to (A) Zero
(A) A (B) A ⃗ (B) Along west
(C) Zero vector (D) Zero (C) Along east
(D) Vertically downward
Q2 If A ⃗ = 3^i + ^j + 2k ^ and B⃗ = 2^i − 2^j + 4k
^,
Q7 What is the value of
then value of |A ⃗ × B⃗ | will be
– → → → →
(A) 8√2 ( A + B ) ⋅ ( A × B )?
–
(B) 8√3
– (A) 0 (B) A2 − B2
(C) 8√5
– (C) A2 + B2 + 2AB (D) None of these
(D) 5√8
Q8 Area of a parallelogram, whose diagonals are
Q3 Which of the following is the unit
^ and ^i − 3^j + 4k
3^i + ^j − 2k ^ will be:
vector perpendicular to A ⃗ and B⃗ ?
(A) 14 unit
(A) A^×B^
–
AB sin θ (B) 5√3 unit
(B) A^×B^ –
(C) 10√3 unit
AB cos θ
⃗ B⃗ –
(D) 20√3 unit
(C) A ×
AB sin θ
⃗ B⃗
(D) A × Q9 In an clockwise system
AB cos θ
(A) ^ ^
j×k = ^i
Q4 If A ⃗ × B⃗ = C ⃗, then which of the following (B) ^
i ⋅ ^i = 0
statements is wrong?
(C) ^
j × ^j = 1
(A) C ⃗ ⊥ A⃗ ^ ⋅ ^j = 1
(D) k
(B) C ⃗ ⊥ B⃗
(C) C ⃗ ⊥ (A ⃗ + B⃗ ) Q10 What is the unit vector perpendicular to the
following vectors 2^ ^ and
i + 2^j − k
(D) C ⃗ ⊥ (A ⃗ × B⃗ )
^
6^i − 3^j + 2k
Q5 If A ⃗ × B⃗ = B⃗ × A,⃗ then the angle between A ⃗ (A) ^i +10^j−18k^
and B⃗ is
5√17
^
^i −10^j+18k
(B)
(A) π2 5√17
^
^i −10^j−18k
(B) π3 (C)
5√17
(C) π
(D) ^i +10^j+18k^
(D) π 5√17
4

Android App | iOS App | PW Website