RUIFENGPOLYTM LS-61

LS-6
Acrylic Impact Modifier

Product Description
Description
Acrylic impact modifiers were used in the rigid PVC in the 1950s. Its main function was to improve the impact
strength and processability of PVC products. Through the years, Acrylic impact modifiers have been developed
into an essenial part in additives family.
Ruifeng LS series is a core-shell structure Acrylic Impact Modifier. It can give PVC excellent impact resistance
performance as well as weatherability, coupled with the necessary properties of processing aids. It is an ideal
impact modifier for rigid PVC profiles, sheets, boards, pipes, pipe fittings,etc.

Shell(
Shell(Tg=80℃）

Core
ore(Tg=-45℃)

Technical specifications
Index/Product Name LS-61
Appearance White fluid powder
Particle size 40 mesh (%) 99
Volatile contents (%) ≤1.0
Bulk density (g/cm3) 0.40-0.55

Product Benefits
Produ
◆Excellent Weatherability,LS-61 has been extensively tested for long-term weather resistance and impact and
color retention.
◆Superior "Satin" Surface Finish.The wide processing window of LS-61 assures a consistently flawless "satin"
surface finish.
◆ Good Low-Temperature Impact.The unique chemical composition of LS-61 imparts excellent
low-temperature impact resistance.
◆ Improved Processability.Because of the Low melt viscosity of LS-61, extrusion temperatures are lower,
resulting in enhanced compound stability and output.
◆High Output.The low melt viscosity of LS-61 allows higher output without increasing extruder amps.

YIYUAN ECONOMIC DEVELOPMENT ZONE,ZIBO,SHANDONG PROVINCE.

E-MAIL: [email protected]
Material Safety Data Sheets
MSDS are available outlining hazards and safe handling methods. consult Ruifeng for MSDS of LS-61 before
handling for additional information concerning personal protective equipment, Safety, Health and Environmental.

Storage, Packing & Transportation

LS-61 Packed in 25kg woven bag or 500kg bulk bag.Avoid insolation, drench.Stored in cool and draughty place,
shelf life: one year.

Countertypes
KM-355/KM-342 FM-40 D-320 IM808

Particle size

＞60Mesh
60Mesh 60-80 Mesh 80-100 Mesh 100-120 Mesh 120-1880 Mesh
120-1 ＜180
180 Mesh
Particle size
(%) (%) (%) (%) (%) (%)
LS-61 16.2 26.9 26.3 18.3 9.8 2.5
FM-50 15.2 29.5 23.8 12.0 14.3 5.2
KM-355P 16.1 25.9 27.3 9.8 15.3 5.6
D-320 3.6 10.7 17.9 17.8 25.7 24.3
CPE 22.6 46.2 16.2 9.2 4.9 0.9

Processing Properties

Min. Torque Max. Torque Balance Torque Balance Time Fusion Time
ITEM
(Nm) (Nm) (Nm) (S) （SS）
LS-61B 24.6 34.1 26.3 408 61
FM-50 25.2 34.5 26.3 402 62
KM-355P 24.8 35.1 26.1 407 59
D-320 26.1 36.8 26.6 411 58
CPE135A 22.0 29.2 24.5 420 83

Weatherability Experiments

Static
Original
Result
Whiteness 1 Hours at 140℃ Rate (%)
LS-61 85.587 81.864 4.35
FM-50 86.754 81.337 6.24
KM-355P 85.203 78.058 8.39
D-320 86.301 77.633 10.04
CPE135A 73.523 54.165 26.33

YIYUAN ECONOMIC DEVELOPMENT ZONE,ZIBO,SHANDONG PROVINCE.

E-MAIL: [email protected]
Charpy Impact Strength

ITEM LS- 61
LS-61 FM-50 KM-355P D-320 CPE135A

Impact Strength (KJ/m2) 12.31 14.17 12.69 12.08 9.06

Remarks: Condition 190

Condition：190
190℃ Speed 45rpm
Speed：45rpm
Formulation (PHR)
PVC(S-1000) 100 PE wax 0.15
Tin stabilizer 181 1.0 OPE 0.25
Cast 0.5 Titanium Dioxide 5
Hst 0.3 CaCO3 6
Processing aid LP-20 2.0 IMPACT MODIFIER 6

Tensile Strength

ITEM LS-61 FM-50 KM-355P D-320 CPE135A

Tensile Strength (Mpa) 40.89 40.24 40.95 40.30 31.90

Properties & Recommended Dosage

Item LS-61
Properties For opaque PVC products
Application Profiles, sheet, pipes, pipe fittings, etc.
Dosage Impact Modifiers 4~7
(phr) Processing Aids 0.55~0.8
0.

YIYUAN ECONOMIC DEVELOPMENT ZONE,ZIBO,SHANDONG PROVINCE.

E-MAIL: [email protected]