1500 Standard & 1300 High Inrush Switches

150A to EN61058-1 and 16A 250Vac

Key Features Approvals and specifications

Standard rocker switch Matching indicator 1500 Series 16(4)A 250Vac T125

Non-illuminated Single Contact UL CSA 16A Non Ind 250Vac, (2 posn) 250Vac 1hp, 125Vac
 1/2hp, (3 posn) 250Vac 1/2hp, 125Vac 1/4hp
150A inrush Splash resistant option 1330 36Vdc 14A
1350 72 Vdc 7A
 hoice of switching
C DC LED Illumination 1500 & 1510 14 Vdc 10A
circuits including 3 Avaliable for “P“ Rocker UL 85°C, file E45221, CSA file LR10990
position
 anel cut out ‘A’ style:
P
 hoice of bezel styles
C 27.3 x 12.3mm In house test:
 10A 24Vdc—Indicative rating only
Choice of panel cut outs
1300 series 16(6)A 250Vac T125 5E4 (50,000 Ops.)
150A Inrush to EN61058-1

Terminal Function Rocker Body Finish Body Colour

C Standard 1500 M B
Panel cut-out Bezel

Cut-outs must be punched in the

ON - OFF
A
direction of insertion
Softline Matt Black
Matt
1501
HP rating N/A
ON - OFF (momentary ON)
A
6.3 x 0.8
1502 R
Gloss or Matt

HP rating N/A
B Splash resistant (with
Arcshield) Matt G Red
H ON - OFF (momentary OFF)
Gloss

1510 μ
HP rating N/A B Applies to both
ON - ON Rocker & Body

H
Slotted (for custom

4.8 x 0.8* 1511 μ

Adaptors)
not momentary Matt only
W
White
HP rating N/A
ON - ON (momentary 1 side)
K
1520 μ L
125V & 250V 1/2 HP V Curved Matt or gloss

H terminal rated T100 only

ON - OFF - ON Matt only

1521 μ
2.8 x 0.8* HP rating N/A
H terminal rated T100 only W Splash resistant (with
Arcshield) Matt
ON - OFF - ON (momentary 1 side)
Q
T 1522 μ
HP rating N/A Gloss or matt

H terminal rated T100 only

X
ON - OFF - ON (momentary 2 sides) Two colour Matt
ON - OFF only
(not momentary)

Solder
0430 (Indicator)
HP rating N/A
H terminal rated T100 only
R
U
1484
F
Matt only
Flat lens Gloss (0430
In-house tested to 10(3)A only)

250Vac
3 position selective

Right angle “T” solder

terminal
1487 T
In-house tested to 10(3)A

A
250Vac Softline lens Matt (0430
only) as F but with

X
3 position selective raised profile Matt only

High Inrush 1300

ON - OFF

PCB 0.8Sq*
*N/A for 1300 series

354 Switches
 Dimensions Splash Resistance

UL CSA 20A 250Vac 1hp, 125Vac 1/2hp 1500 W and B splash resistant options
UL 85°C, file E45221, CSA file LR10990 Feather edge seals and a close fitting collar protect current
carrying parts from moisture.
In house test: B option has Hytrel collar/seals for enhanced protection.
Panel thickness
20A 24Vdc—Indicative rating only A,Q 0.75 to 3.3mm
L,B,T 0.75 to 2.5mm
R 0.75 to 3.0mm
The 1500 & 1300 switch range are capable 1300 High inrush, positive break switching
of reaching in excess of 300K cycles * For cut-out details
on momentary switches
The 1300 series mechanism ensures contact welds formed at
call sales switch-on are positively separated by the plunger tube acting directly
BioCote antimicrobial additive. Independently on the step in the moving contact.
verified to ISO22196:2007.

3mm contact gap except if marked μ.

Rocker Colour Lamp Voltage Insert Colour Legend Legend Colour Options

Un-Lit
_ _ _ _
Finish
Matt is standard.
Blank Blank Blank Blank
Colour

B Call sales for custom colours.

A full range is available for large
Black orders.

2 Legend printing
125V Neon
R 602A B Select from the examples or
call sales for custom legends.
R Red Black
Lamp voltage
Red Call sales for details.

3 Blanking plates A0434 - -

250V Neon Dummy units to fill unused panel
holes.
W W W Protective cover
White White White
Snaps on to A, L, Q or T bodies
7 (add G after body code in
cat no.), this reduces panel
12V Filament thickness by 1mm.

Lit

8
24Vdc Filament
A
Amber
Panel sealing washer W46 is
available for the same body sizes,
this reduces panel thickness by a
further 0.8mm.
C Covers are not suitable for
momentary types.
Clear

For all options call sales.

G
Green

R
Red
Examples

C1500AR - - - C1500AL - - - C1500XL - - - C1510AL - - - C1520AL - - - C0430AL - - -

T1500AR - - - T1500AL - - - T1500XL - - - T1510AL - - - T1520AL - - - T0430AL - - -

Switches 355
5500 Lit Rocker Series
10A 250Vac

Key Features Approvals and specifications

 tandard rocker switch

S Single Contact 16(4)A 250Vac T85/55
  10(3)A 250Vac T100/55, (12A 250Vac T125/55 for
Illuminated Splash resistant option P rocker only)
 
Choice of switching Panel cut out ‘A’ style: UL CSA 15A 250Vac, CSA 16A Non Ind 250Vac
circuits UL CSA 250Vac 1hp, 125Vac 1/2hp
 UL 85°C, file E45221, CSA file LR10990
Choice of bezel styles
 μ contact gap.
Choice of panel cut outs
 For Twin units repeat the order details for both the
Matching indicator left and right sides.

Terminal Function Rocker Body Body Colour Rocker Colour

C Approvals & ratings

vary with function A A Panel Cut - outs Bezel B Un-Lit

ON OFF Switches Softline (Matt only) Black

- ON when pressed
over terminal 3
B
Black

6.3 x 0.8

5500 μ B W R
White Red
H ON - OFF
Single Contact

P
Lit window (Matt only) W
5503 μ
White
L
4.8 x 0.8
ON - OFF
Lit
Switched neutral

T
Lit

5508 μ Q A
Amber
ON - OFF
Lit
Unswitched neutral
Solder

C
Clear

R
G
Green

T R
Red

356 Switches
Dimensions
Panel thickness Twin units
A,Q 0.75 to 3.3mm Two single switches or a switch and an indica-
L,B,T 0.75 to 2.5mm tor light can be assembled side by side in one
R 0.75 to 3.0mm double Contact body.
For 5500 range panel cut-out details (L, B and
T) call sales.

Terminal spacing - For twin units the first set of order format details refer to the
Contacts 10.8 between centres (twin units) left hand unit, when looking at the front of the assembly.
(This has terminal numbers 1, 2 & 3)

Lamp Voltage Legend Legend Colour Options

_ _ _ Finish
Blank Blank Blank Matt is standard.

Colour
Call factory for custom colours.
A full range is available for large orders.

2 Legend printing
125V Neon
602A B Select from the examples or
call factory for custom legends.
Black
Lamp voltage
Call factory for details.

3 Blanking plate A0434 - - (SP) A0494 - - (DP)

250V Neon Dummy units to fill unused panel holes.

W Protective cover
Snaps on to A, L, Q or T bodies (add G after
White
body in cat no.), this reduces panel thickness
by 1.00mm.

5
12Vdc LED (P Rocker)
IF = 20-30mA

6
24Vdc LED (P Rocker)
IF = 20-30mA

Panel sealing washers W46 (Single Contact)

and W42 (Double Contact) are available for
these body types, this reduces panel thickness
7 by 2mm.
12V Filament

For all options call the factory.

8
24Vdc Filament

Examples

C5503AL - - - C5500AL - - - C5503PL - - - C5503A/C5430AL C5503A/C5503AL C5503P/C5503PL

Switches 357
1500 Twin Units Switches and Indicators
16A 250Vac

Key Features Approvals and Specifications

Twin unit rocker switch Splash resistant option 16(4)A 250Vac T125

Choice of switching circuits Panel cut out ‘A’ style: UL CSA 16A 250Vac
including 3 position 27.2 x 22.3mm UL CSA (2 posn) 250Vac 1hp, 125Vac
1/2hp, (3 posn) 250 Vac
 ush-on, solder and PCB
P 1/2hp, 125Vac 1/4hp
terminals UL 85°C, file E45221, CSA file LR10990

Choice of bezel styles For versions with High Inrush or for 50,000
 operations,
Choice of panel cut outs 3mm contact gap except where marked μ.

Matching indicator

Single Contact switches

Terminal Function Rocker Body Finish Body Colour Rocker Colour

C
Approvals & ratings vary
with function ON OFF
Switches - ON when
A Panel Cut - outs Bezel M B Un-Lit

pressed over terminal Softline (Matt only) Black

1 or 4 Matt

A B
6.3 x 0.8
Black
Gloss or Matt

B G
H 1500 Softline (Matt only) Gloss W R
White Red
ON - OFF B
Applies to both
4.8 x 0.8
Matt only Rocker & Body

1510 μ W W
White
T
Softline (Matt only)
ON - ON
L
Solder 1520 μ Matt only Lit

ON - OFF - ON X
Softline (Matt only)
K A
0430 Q Amber

Indicator Gloss or matt

A
Softline (Matt only) C
Clear

X R
4.0
9.1 Matt only
G
Green

T
R
Matt only Red

358 Switches
Dimensions Splash Resistant
Panel thickness Twin units
A,Q 0.75 to 3.3mm
Feather edge seals and a
Two single switches or a switch and an indica-
L,B,T 0.75 to 2.5mm tor light can be assembled side by side in one
close fitting collar protect
R 0.75 to 3.0mm double Contact body. current carrying parts from
moisture.

B option has Hytrel collar/

seals for enhanced
protection.
For twin units the first set of order format
details refer to the left hand unit, when looking
at the front of the assembly.
Call sales for terminal spacing details (This has terminal numbers 1, 2 & 3)

Insert Colour Lamp Voltage Legend Legend Colour Options

_ _ _ _ Finish
Matt is standard.
Blank Blank Blank Blank
Colour
Call factory for custom colours.
A full range is available for large
orders.
R 2 Legend printing
Red 125V Neon 602A B Select from the examples or
call factory for custom legends.
Black
Lamp voltage
Call factory for details.
W 3
White 250V Neon

W
White

5
12Vdc LED (P Rocker)

6
24Vdc LED (P Rocker)

7
12V Filament

8
24Vdc Filament

Examples

C1500A/C1500AL C1500A/C0430AL C1500X/C1500XL C1520A/C1510AL C1500A/C1520AL C0430A/C0430AL

Switches 359