how to emv

you need unfused cards from ebay. JA040 or JA080. Then you need a jcop formatting
tool, cardpeek, and ATR Changer. You'll also need to download an arqc generator
free from BP-Tools. Then of course, the main item is an x2 software program from
2021, and an Omnikey 3021There's a lot more involved to it than what people want to
admit because they're all trying to make it sound easy so that they can hustle you.

Here's some pretty good instructions.

2021 Physical Clone Creation Guide

For Educational Purposes Only

Things Needed:

@Mr_EMV X2.5 PACKAGE ($350) (Add @Mr_Emv On Telegram, He's legit!)

MSR Device (Under $100)

Omnikey 3021, or 3121 (Under $100)

JCOP UNFUSED or PRE-INITIATED JAVA CARDS ($5 to $20 per card blank)

(Ask for which specific cards are needed! In my case J2A040 Unfused do the trick!)

(If you are unsure if you card is fused or unfused use JCOP Manager, its a free
software!)

All of these can be bought on amazon, aliexpress, and ebay!

1. Erase + Format Blank Card TWICE using JcopEnglish (Wait Until it Says Success
for Both)

2. Initialze the Card ATR using pyResMan + Visa or MC Script included (Free) or
ATRTOOL from @TitusKing on Telegram for $400.

3. Check that the card's cold atr changed in CardPeek by selecting EMV and press
Analyze, If it says Java Blank Nigeria or whatever etc... it didn't, if it says
VISA / Mastercard Etc Bank details at the top, your green! If it says the bank
details and java card don't worry, as long as it isn't stating its blank!

4. Open MSRX and enter Track Two and GENERATE the Track One if not given using
Omerta Generator Website

5. Write the Tracks 1+2 to the Mag and swipe the blank 3 times to be safe then
press read and repeat the swipes to ensure data is on the card mag correctly! Be
careful to press WRITE before WRITING and READ before READING.

Your Card is now Ready for The Old ATM's / Swipe POS (for 1xx style dumps only) ...
Continue for 201, 221, etc for Insert Chips! (For these first 5 steps you could
technically just open MSRX and just enter the card details there, the security on
1xx dumps are SHIT! But you must do these steps for the 2xx dumps guide to work, it
won't hurt your 1xx if you do it anyhow!)

6. Open X2.5 (Most Updated Version Currently!) and press the EMV tab

7. Enter the Track 2, Enter the AID (31010 or 41010), Pin, Currency Code, Country
Code, Name (Select Erase Holdername - if No name dont Enter anything leave it
blank), and Select Track 1 Data Button and enter the Disrection data found AFTER
the 6 expiry date numbers after the track, i.e 22021010003002000.... the
10003002000 and beyond 0's would be the track 1 discretionary data, copy and paste
this from the Omerta Track One Generator or enter it if included in the dump! For
the Application label, refer to cardpeek and open the emv tab again and read your
card, it will either be VISA CREDI, VISA DEBIT, INTERAC, VISA CREDIT, etc.

8. Next Press Change Data for the PREF NAME and the EXPIRATION DATE, google the
month it expires in and find that years final day, i.e october 31st in 2022 due to
leap years, etc. Select VISA or MC or AMEX BUY PLUGIN, and select OMNIKEY and press
CREDIT - Double check you've included every field neccessary!

9. It will say JOB COMPLETED, then head to the IST LOAD page and copy the details
you've entered on the EMV page, and at the top bar where it says open... press that
and locate the IST file, this part is extremely vital, you MUST have a matching BIN
(the first 6 digits of the card) to the IST or your card won't hit green, ensure
you have a REAL CARD in your house with a leaked dump on bigfat.cc briansclub.at
before anything, or use one of the new 2021 given IST's included in the new Mr_EMV
Package as of January 31st 2021. You must have an IST file that matches the card
type and bin.

10. (OPTION ONE) The final three boxes you'll have empty are the ARQC 1, 2, and 3.
For these, open "Arqc_Gen" and enter the PAN which is the first 16 digits of your
TRACK 2, and also be sure to change the country and currency code to be accurate to
the card details, and change the ATC to 0001, press generate, copy the ARQC to X2.5
to slot one in the LOAD IST page, then go back to Arqc_Gen and change the ATC to
0002, then press generate, leaving the other details alone, now copy the new ARQC
key to X2.5 to slow two in the LOAD IST page, then go to Arqc_Gen again finally and
change the ATC to 0003, then press generate and copy the final 3rd ARQC to the LOAD
IST page on X2.5. Now Pres BURN in X2.5. Job Completed. :)

10. (OPTION TWO) The final three boxes you'll have empty are the ARQC 1, 2, and 3.
For these, open BP-Tools Crypto Calculator and Select "Applications" and find the
application that matches your card, for visa I use VSDC, for Mastercard there is a
Mastercard Issuer App, Find it. Then Enter the PAN which is your track 2's first 16
digits, then press the green lock, and head to tab 2, find the ATC and change it to
0001, then press the green lock, find the ATC again and match it, find the currency
code and match it to the real currency code, try to fill out any data you can
manage to include such as the time of interaction if included, etc, then again
press the green lock and leave it default and you'll see your first ARPC / ARQC
number generate, copy it from the right bottom of the generator screen and enter
it, now go back to tab one on bp tools in this process in that application you've
selected, press the green lock on page one, then go to tab page two, enter the atc
0002, and then press the green lock, and repeat the process from before again just
chaning the atc to 0002, and finally repeat this again but chaning the atc in the
two needed tabs in the same green lock order, with 0003. Now you've copied your
three ARQC ARPC codes and you are set to press BURN in the X2.5 application window
for IST LOAD. Job Completed. :)

That's it, the card's ready to go for Chip Insert ATMs / POS Machines. Happy
cloning. If anything fails, your dump could be bad, or you didn't do something
correctly. This is all a game of luck!

This is For Educational Purposes Only