Scribd
Upload
12 views

SET A Final

Uploaded by

adhe laishram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
12 views

SET A Final

Uploaded by

adhe laishram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

1. Refer to the exhibit.

Given the traditional hierarchical design model, which set of features correctly identifies the modules of
an enterprise network?

2. What type of specialized memory is used to facilitate high performance switching in Cisco multilayer switches?
A. content-addressable memory (CAM)
B. ternary content addressable memory (TCAM)
C. address resolution protocol (ARP) memory
D. Cisco Express Forwarding (CEF) memory

3. What is the purpose of the Cisco Enterprise Architecture?


A. It replaces the three-layer hierarchical model with a flat network approach.
B. It provides an enterprise-wide system network architecture that helps protect, optimize, and grow the network
infrastructure tha supports the business processes of a company.
C. It provides services and functionality to the core layer by grouping various components into a single component that is
located the access layer.
D. It reduces overall network traffic by grouping server farms, the management server, corporate intranet, and e-commerce
router the same layer.

4. A network designer must provide a rationale to a customer for a design that will move an enterprise from a flat network
topology to a hierarchical network topology. Which two features of the hierarchical design make it the better choice? (Choose
two.)
A. reduced cost
B. scalability
C. less equipment required
D. higher availability
E. lower bandwidth requirements
5. A user needs to access a file server that is located in another department. Which layer of the Cisco Hierarchical Network
Model will process the traffic first?
A. access
B. core
C. distribution
D. control

6. Which protocol is required for Cisco Express Forwarding to be able to successfully forward packets on a multilayer switch?
A. Cisco Discovery Protocol
B. Spanning Tree Protocol
C. Address Resolution Protocol
D. Dynamic Trunking Protocol
E. VLAN Trunking Protocol

7.

Refer to the exhibit. On which interfaces should VRRP commands be applied to provide first hop redundancy to PC-01 and PC-
02?

A. G0/0 and G0/1 on Core


B. G0/0 on Edge-01 and G0/0 on Edge-02
C. G0/1 on Edge-01 and G0/1 on Edge-02
D. G0/0 and G0/1 on ASW-01
8

An engineer must configure HSRP group 300 on a Cisco IOS router. When the router is functional, it must be the active HSRP
router. The peer router has been configured using the default priority value. Which command set is required?

A. standby version 2 standby 300 priority 110 standby 300 preempt


B. standby 300 priority 110 standby 300 timers 1 110
C. standby version 2 standby 300 priority 90 standby 300 preempt
D. standby 300 priority 90 standby 300 preempt

If a VRRP master router fails, which router is selected as the new master router?

A. router with the lowest priority


B. router with the highest priority
C. router with the highest loopback address

D. router with the lowest loopback address


10

In OSPF, which LSA type is responsible for pointing to the ASBR router?
A. type 1
B. type 2
C. type 3
D. type 4

11

An engineer is configuring GigabitEthernet1/0/0 for VRRP. When the router has the highest priority in group 5, it must assume
the master role.
Which command set should the engineer add to the configuration to accomplish this task? interface GigabitEthernet1/0/0
description To IDF A 38-70-774-10 ip address 172.16.13.2 255.255.255.0

A. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 track 1 decrement 10


B. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 preempt
C. vrrp 5 ip 172.16.13.254 vrrp 5 priority 100
D. vrrp 5 ip 172.16.13.254 255.255.255.0 vrrp 5 track 1 decrement 10 vrrp 5 preempt

12

How does the EIGRP metric differ from the OSPF metric?

A. The EIGRP metric is calculated based on bandwidth only. The OSPF metric is calculated on delay only.
B. The EIGRP metric is calculated based on delay only. The OSPF metric is calculated on bandwidth and delay.
C. The EIGRP metric is calculated based on bandwidth and delay. The OSPF metric is calculated on bandwidth only.
D. The EIGRP metric is calculated based on hop count and bandwidth. The OSPF metric is calculated on bandwidth and delay.

13
Which two of these functions do routers perform on packets? (Choose two)

A. examine the Layer 2 headers of inbound packets and use that information to determine the next hops for
the packets
B. update the Layer 2 headers of outbound packets with the MAC addresses of the next hops
C. examine the Layer 3 headers of inbound packets and use that information to determine the next hops for
the packets
D. examine the Layer 3 headers of inbound packets and use that information to determine the complete
paths along which the packets will be routed to their ultimate destinations
E. update the Layer 3 headers of outbound packets so that the packets are properly directed to valid next
hops
F. update the Layer 3 headers of outbound packets so that the packets are properly directed to their ultimate
destinations
14

Refer to the exhibit. The ports that are shown are the only active ports on the switch. The MAC address
table is shown in its entirety. The Ethernet frame that is shown arrives at the switch. What two
operations will the switch perform when it receives this frame? (Choose two)
A. The MAC address of 0000.00aa.aaaa will be added to the MAC address table.
B. The MAC address of 0000.00dd.dddd will be added to the MAC address table.
C. The frame will be forwarded out port fa0/3 only.
D. The frame will be forwarded out fa0/1, fa0/2, and fa0/3.
E. The frame will be forwarded out all the active ports.
15

Refer to the topology and switching table shown in the graphic. Host B sends a frame to Host
C. What will the switch do with the frame?

A. drop the frame


B. send the frame out all ports except port 0/2
C. return the frame to Host B
D. send an ARP request for Host C
E. send an ICMP Host Unreachable message to Host B
F. record the destination MAC address in the switching table and send the frame directly to Host C
16

An administrator is working with the 192.168.4.0 network, which has been subnetted with a /26 mask. Which two
addresses can be assigned to hosts within the same subnet? (Choose two)

A. 192.168.4.61
B. 192.168.4.63
C. 192.168.4.67
D. 192.168.4.125
E. 192.168.4.128
F. 192.168.4.132
17

Which layer of the OSI model controls the reliability of communications between network devices using
flow control, sequencing and acknowledgments?

A. Physical
B. Data-link
C. Transport
D. Network

18

How does TCP differ from UDP? (Choose two)

A. TCP provides best effort delivery.


B. TCP provides synchronized communication.
C. TCP segments are essentially datagrams.
D. TCP provides sequence numbering of packets.
E. TCP uses broadcast delivery.
19 What is the proper CIDR prefix notation for a subnet mask of 255.0.0.0?
A. /8
B. /16
C. /24
D. /32
20 What is the dotted decimal representation of the IPv4 address 11001011.00000000.01110001.11010011?
A. 192.0.2.199
B. 198.51.100.201
C. 203.0.113.211
D. 209.165.201.223

Theory Questions

1.Describe the purpose of VLAN Trunking Protocol (VTP) and its benefits and potential risks in a large switched network.

2.Explain the main differences between EIGRP and OSPF routing protocols in terms of metric calculation, convergence, and
scalability.

3.Explain the concept of Dynamic Multipoint VPN (DMVPN) and its advantages over traditional point-to-point VPNs.

4.What are the differences between Internal BGP (iBGP) and External BGP (eBGP), and why is it important to understand the
distinction between the two?

You might also like