0% found this document useful (0 votes)
13 views

Manual EN 146131

Uploaded by

gugusli2005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
13 views

Manual EN 146131

Uploaded by

gugusli2005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Statement:

1. First, thanks for using our company's digital products!


2. Please read the manual before using for the proper use of it.
3. As for the information, please back up on your own. Our company
takes no responsibility to any loss of data caused by abnormal
operation of software, hardware, or product repair, or battery
changing, or other accidents, also the loss caused indirectly
by these reasons. Meanwhile, we also can’t control the possible
misunderstanding of the manual from the customer. Thus, our
company won’t take charge of accidental damage caused by using
this manual, also the third party’s claim for compensation
caused by using this manual.( The product system will occur some
part of the memory, so it’s normal if there’s any difference
with the standard memory)
Note:
1. Please do not attempt to open, repair or modify the product.
2. Please do not use this product in the region with prohibited use
sign of electronic products (such as airplane, etc).
3. Please do not put in the mouth of products or accessories.
4. Please do put the product into water or other liquids.
5. Please do not use this product in special cold, hot, humid or
dusty environments.
Warnings:
1. Please do not drop the product itself or its parts, for avoiding
malfunctions.
2. Please do not keep the product under the bright light, or heat,
for extending the life span of the product itself.
3. Please charge it sometimes if leave it unused for a long period,
to avoid losing battery function.
4. In order to expand the life span of the battery, please don’
Recorder Instruction Manual t use it when charging.
Please read the manual before using it. 5. Please do not force to remove or waggle up and down, side to side
to connect accessories (For example: headphone, microphone, USB
connection, etc.).
6. This machine is for learning tool, our company will out of any
law responsibility caused by the economical or commercial usage.
7. Please don’t set it under 60℃ environment (such as: sauna room,
inside the packed car), it might reach to 80℃ inside the car.
8. Our company takes no responsibility to any loss of data when
using the product or service. So if there is important
information in the product memory, please back up on your own.
9. Please note that this product is prohibited for illegal use. For
example: for the privacy of others or eavesdropping.

Product description of each part:

1: DEL/A-B 7: Hole for hanging 13: Inner microphone


2: Vol 8: Earphone jack 14: Menu key
3: Vol 9: Record lamp 15: Play
4: USB jack 10: Screen 16: Play
5: Microphone jack 11: Stop key 17: Power key
6: Record key 12: Play/Pause
The basic application method: shutdown automatically.

 Main function section ※Suggestion: Please stop the machine by “PLAY/PAUSE” , then turn
off the power by “OFF”. If turn off the power directly, it will
reset to defaults.

 Record
Play record System setting Play music 1. Start to record :Turn on the power, machine came into record
interface, short press the “REC” to enter default state, when
 Special button operation specification the record lamp in a long flash, and the data in the upper screen
In the manual, “short press”“long press” appear frequently, start to change, which means the record state.
their meanings as follows: 2. Pause record :During record, short press “REC” for pausing
1. Short press: After pressing the button, then leave the finger record, lamp and the data in the upper screen flash, cancel
immediately. pausing, then short press again the “REC”.
2. Long press: After pressing the button, keep it for a while , 3. Save record : During record process, short press “Pause”
until the screen with related contents. button, “ Save ” appears on the screen. Enter into play/
standby mode. Repress “PLAY” button, will play current record
The basic application method file.
 Turn on the power 4. Turn off record lamp :During record process, short press “Menu
M” to turn off record lamp, then short press again “Menu M”
1. Check the inner lithium battery enough or not. to turn on record lamp.
2. Set the “ON”, after initialization, the screen with “play
record interface”  Play/ Pause
Under working interface, short press “Play ”or “Play ”
 Turn off the power to choose play record or play music. Short press “Menu M” to
enter play interface, short press “Play ” to start play,
1. When the machine is in standby mode, set to “OFF”, then the
then short press again “Play ” to pause/play.
machine turned off;
2. When the machine is in the stop state, press the "Play" button
 Change playing content
for a few seconds, the machine shutdowns after showing "Bye-Bye",
Under play state, short press “Play ” or “Play ” button
which can only turn off the working state, can’t turn off the
to change playing content.
power. If no use in a long period, please turn off the power
“OFF”, which could save power.
3. During record, if the battery is going to use up, then it will
 Change music file/record file mode and short press “ Play ” to cancel deleting, or press
Under playing music file or record file state, short press “Menu “Play ” to exit directly.
M” to exit to main menu, short press “Play ”or “Play ”
to choose voice play or music play, short press “Play ” for
playing confirmation. ※Warning:“Delete all” means to delete forever, the file can’
t be back, please be cautious.
 Adjust volume
Under playing music file or record file state, short press  Set to play
“ Volume” button, then will show the volume degree, press Under playing mode, short press “Menu M” to set the playing
“Volume+”to increase volume, press “Volume-” to decrease menu (cycle mode, sound effect mode, repeat mode, repeat time,
volume, and there’ll be volume respond on the screen. After repeat interval, exit), short press “Play ”or “Play ”
adjustment, short press “Play ” to save the volume and exit to choose as follows:
the volume adjustment mode.( It ’ ll exit automatically if 1. Cycle mode:Short press “Menu M” to enter cycle mode, short
there’s no operation in 10 seconds.) press “Play ”or “Play ” to operate. (normal mode,
single mode, full mode, exit), short press “Play ” or
 Choose play and play , Fast forward, Rewind “Menu M” to confirm and exit the playing interface.
Under playing music file or record file state, short press 2. Sound effect mode:Short press “Menu M” to enter sound effect
“Play ”or “Play ” to choose the next play file, long mode, short press “Play ”or “Play ” to operate (nature,
press “Play ”or “Play ” to fast forward, rewind. rock, pop, classic, soft, jazz, mega bass ), short press
 A-B repeating “Play ”or “Play ” to confirm and exit the playing
When playing record/music file, short press “DEL/A-B” to set interface.
repeat starting point A, then short press “DEL/A-B” to set 3. Repeat mode:Short press “Menu M” to set the repeat start A,
repeat ending point B. There’ll be “A-B” in screen, repress repress shortly “DEL/A-B”to set repeat end B, There’ll be
shortly “DEL/A-B” to repeat the content between A-B, then “A-B” in screen, repress shortly “DEL/A-B” to repeat the
short press “DEL/A-B” to exit “A-B” repeat mode.( Default: content between A-B, then short press “DEL/A-B” to exit
It back to normal playing after repeating five times) “A-B” repeat mode.( Default: It back to normal playing after
 Delete file repeating five times)
1. Delete file :At the music / record playing standby or pause 4. Repeat time:Short press “Menu M” to set repeat time, short
interface, short press “ DEL/A-B” to choose delete, short press “Play ”or “Play ” to choose time (0-10), short
press “Play ”or “Play ” to choose delete single file/ press “Play ” or “Menu M” to confirm and exit the playing
whole file, exit, then short press “ Menu M ” to confirm interface.
delete, then “deleting” showed on the screen. 5. Repeat interval:Short press “Menu M” to set repeat interval,
2. Cancel deleting :If need to cancel deleting, choose “EXIT” short press “Play ”or “Play ” to choose time (0-10),
short press “Play ” or “Menu M” to confirm and exit the then short press “Menu M” confirm and exit to menu setting.
playing interface. 7. Shut down setting: Shortly press “ Menu M ” to enter this
 System setting interface, short press “Play ”or “Play ” to choose (Power
Under power on interface, short press “Please press / saving mode, Sleep mode), short press “Menu M” to enter, short
to input code”, short press “Menu” to enter next code setting, press “Play ”or “Play ” to adjust time, short press “Menu
choose system setting, short press “Menu” to enter system M” to confirm and exit to menu setting.
setting, short press “ Play ”or “ Play ” to choose as 8. Comparing adjustment : Shortly press “ Menu M ” to enter
follows interface, short press “ Play ” or “ Play ” to choose
1. System time:Short press “Menu M” to enter time setting comparing light (01-15), short press “Menu M” confirm and exit
interface, short press “Vol ”or “Vol ”to operate to menu setting. The lighter of the comparing light, the brighter
(year/month/day/hour/minute/second), short press “Play ”or of the screen.
“Play ” to set those accordingly, then short press “Menu 9. Storage situation: Shortly press “Menu M” to enter interface,
M” to confirm and exit the playing interface. you can check the total space and the used space of the machine.
2. Repeat type:Short press “Menu M” to enter repeat type, short Short press “Menu M” to confirm and exit to menu setting.
press “Play ”or “Play ” to choose (high-quality recordings 10. Firmware version:Shortly press “Menu M” to check machine
HQ 192Kbps , high-quality sound control192Kbps VOR, long-time software information. Short press “Menu M” to confirm and exit
recording32Kbps, long-time voice control 32Kbps VOR, to menu setting.
high-fidelity recording SHQ 384VOR, then short press “Menu M” 11. Button sound :Shortly press “Menu M” to enter interface,
to confirm and exit to menu setting. short press “Play ”or “Play ” to adjust (01-30). Short
3. Recording origin:Short press “Menu M” to enter recording press “Menu M” to confirm and exit to menu setting.
origin, short press “ Play ” or “ Play ” to choose
(microphone, input music, exit), short press “Menu M” to  LINE-IN wire recording setting
confirm and exit to menu setting. 1. To choose music input or to connect (CD player, Recorder, DVD)
4. Monitor switch : Shortly press “ Menu M ” to enter monitor
through LINE-IN port, then press the recording button to record.
switch, short press “Play ”or “Play ” to choose (Open /
2. External microphone recording: After connecting an external
close monitor), short press “Menu M” to confirm and exit to
menu setting. microphone through LINE-IN interface, and use it by the same way
5. Backlight time:Shortly press “Menu M” to enter backlight as using built-in microphone.
time setting, short press “Play ”or “Play ”(0-29) to 3. Telephone recording: After connecting a telephone box by
adjust, short press “Menu M” to confirm and exit to menu LINE-IN interface, and use it as the same as using the built-in
setting. microphone (in general). (Figure 1)
6. Language choice : Shortly press “ Menu M ” to enter this
interface, short press “Play ”or “Play ” to choose language,
charge, the charging mark will show on the screen, which won’
t flicker when fully charged.

2. The battery can be charged and also be discharged, for durable


usage of battery. When it shows only one grid power, please
charge timely, not charge until use up power.

(Figure 1)

 Connecting with computer


1. Connect one port of USB to itself , the other one connect with
computer USB.
2. Remove the removable disk properly to avoid missing data.
3. When connecting with computer, it can be used as U-disk. You can
upload/download favorite music file or other file by copy.
During transfer the data, can’t stop the connection, or it would
lead missing data.

During downloading data During uploading data During connection

 Charge
1. Connect one port of USB with itself, the other one connect with
computer USB. 4 hours can fully charged it, and it will show full
of the battery mark (Please turn on the switch during charging).
This machine power is provided by charging battery. During
Technology Specification
Difficulty Solution
Item Specification
Space 4GB 8GB 16GB 32GB Problem Cause Solutions
32Kbps 280Hr 560Hr 1120Hr 2240Hr No showing Low battery; Timely charge;
192Kbps 48Hr 96Hr 192Hr 384Hr of the LCD Check the power on or Turn on the power;
384Kbps 24Hr 48Hr 96Hr 192Hr off;
File quantity 199 pcs Not in the recording Turn to recording state;
Recording type WAV type Recording state; Timely charge;
Sampling frequency 16KHz-48KHz stop working Low battery; Delete some files or move them
Frequency 24MHz Memory capacity has to an external device;
been raised to the
Recording power 7mA-12mA
limit or full recording
Actual maximum output L) 9mW+(R) 9mW (32Ohm)
mode;
Microphone 3.5pie Stereo jack
External Unable to Low battery; Timely charge;
Headphone 3.5pie Stereo jack
input open audio No audio file; Confirm documents;
USB PC Interface USB1.1/USB2.0 FULL Speed
files The minimum volume; Adjust the volume;
Inner microphone output 800mW
Words on the The language selection Choose correct language
Inner microphone Dynamic 26mm,8ohm
screen are correctness
Inner MIC Non-oriented capacitor microphone
abnormal
S/N(Noise ratio) 90dB
Confirm that there is Remove the headset;
Power; rated voltage Lithium battery (230MA):3.6V-4.2V
No sound earphone; Adjust the volume;
USB input rated 5V300MAH-5V500MAH
from the The minimum volume; Select the correct recording
voltage/power
speaker Check the recording format;
Storage Inserted flash memory
format;
Operation temperature -20℃~60℃
Confirm whether the Connect the headset properly;
Weight About 33g
headset is connected Adjust the volume;
Size 85mm×36mm×14mm No sound properly; Check whether audio or MP3
Battery life span Record 21 hours from The minimum volume; files are damaged, make sure
(The power of Play 8 hours (by earphone) headphones The damaged audio or the file integrity;
charging fully MP3 files caused the
one time) noise or no voice;
Check whether the USB Ensure that no damage of the
Unable to
USB connection;
properly cable is damaged;
Whether USB connection Normal USB cable connection;
upload/down Delete blank memory;
is normal;
load the
Check whether there are
audio file gaps in the memory;

You might also like