VACUU·PURE® 10C

100% oil-free vacuum pump for the vacuum range

down to 10 -3 mbar. Outstanding performance with
aggressive gases and vapors. Ideal for clean
processes and pure products.

www.vacuubrand.com

Pure vacuum. Nothing else.

Pure vacuum. Nothing else.

For aggressive gases and vapors

■ 10-3 mbar vacuum range

■ 100% oil-free
■ Chemically resistant
■ No wear parts

VACUU·PURE reliably delivers the benefits of oil-free vacuum VACUU·PURE covers many applications. The vacuum pump
technology in the pressure range of 10-3 mbar. is especially developed for processes down to 10-3 mbar,
The vacuum pump combines three important benefits for however, unlike other fine vacuum pump technologies it can
the user: be used across the entire pressure range from atmospheric
100% oil-free, chemically resistant, and no wear parts. pressure to its ultimate vacuum. With a pumping speed of up
to 9 m3/h, the vacuum pump is very capable. Additionally, it
We listened to you: you asked for contamination-free offers exceptional vapor and condensate compatibility. Easy
vacuum that lets your clean processes run efficiently. installation, user friendliness, and the rugged air cooled de-
Our team of experts developed VACUU·PURE for precisely sign enable trouble-free operation. VACUU·PURE is not only
these applications. Our dry screw pumps meet challenges a versatile pump for the laboratory, it is an ideal solution for
where other technologies fall short. demanding processes.

2
10-3 mbar vacuum range

100% oil-free

For dry and complete oil-free operation, VACUU·PURE takes

the screw pump principle to the next level. The vacuum
pump is 100% oil-free.
This enables clean processes and pure products and pro-
tects the laboratory and environment. Save both time and
operating costs, since there is no need to dispose of waste
oil or to interrupt your work for oil changes.

Chemically resistant

The wetted materials in the vacuum pump are all made

of chemically resistant polymers. A thick-walled PEEK encap-
sulation protects the spindles and stator inside the pumping „We can let VACUU·PURE run overnight without any worries
chamber, providing high chemical resistance. because cold traps with liquid nitrogen are no longer
The chemically resistant wetted materials make needed. This has led to a significantly higher throughput in
VACUU·PURE 10C well-suited for work with aggressive gases the laboratory. This vacuum pump will be a sensation in the
and vapors. Cold traps are not typically needed to protect market.“
the pump, as it is often the case with other technologies.
The screw pump has an exceptionally high vapor and con-
densate compatibility. Thanks to the integrated regeneration
mode, it dries out quickly after pumping heavy vapor loads
and is ready for the next process.

No wear parts

A major benefit of VACUU·PURE is that it does not have any

wear parts. The spindles rotate contact-free. Components
are manufactured with the highest precision, down to the
smallest detail.
The special design enables you to run your process without
interruption. VACUU·PURE has no scheduled maintenance
for replacement of wear parts. This saves time, reduces
operating costs, and enables trouble-free operation.

3
Technology

VACUU·PURE takes dry screw pump technology to the next The spindles and stator are protected by a thick-walled PEEK
level as a solution for the use in laboratory scale. encapsulation to protect against corrosion by most chemi-
The special design with two cantilevered spindles and a cals. An integrated sealing gas supply protects the bearings
magnetic gear allows fully oil-free operation. from chemical attack. The unique design of VACUU·PURE
gives it an exceptionally high condensate compatibility,
making a gas ballast unnecessary even at high vapor loads.
The spindles run contact-free and are thus free of abrasion.

Modbus RTU interface Rotatable inlet

Easy system integration and remote control Vertical or horizontal
via process control systems orientation possible

Chemically
Air cooled resistant materials
Versatile use
Throughout the flow path

Regeneration mode Cantilevered spindles

Quick drying cycles after 100% oil-free flow path
high condensate load

„In all tests, VACUU·PURE demonstrated very good perfor-

mance, even in the case of an unusually high vapor load.
The regeneration mode of VACUU·PURE is very helpful to be
able to start the next process very quickly. We believe that
there is no comparable vacuum pump.“

4
Applications

Applications
VACUU·PURE 10C
■ Drying
■ Heat treatment
■ Freeze drying
■ Fore vacuum generation for
turbomolecular pumps
■ Distillation
■ Schlenk line
■ Analytical applications
■ Degassing
■ Coating

VACUU·PURE is ideal for clean processes and pure products VACUU·PURE easily handles high vapor loads through its
in the vacuum range down to 10 mbar.
-3
high condensate compatibility. A gas ballast is therefore not
necessary. The integrated regeneration mode enables rapid
Drying processes, manipulation of oxygen- or moisture- drying of the pump after the end of the process and thus
sensitive compounds, distillations, and even coating proces- the sample throughput can be significantly increased, as
ses can be run with the dry screw pump without downtime compared to other pump technologies.
for maintenance.
VACUU·PURE is also available in a special design for working
At the same time, the high chemical resistance enables with non-corrosive gases and vapors.
trouble-free operation. A cold trap is rarely needed to
protect the pump. This saves time and operating costs „With VACUU·PURE, we have a flexible pump which we can
and enables continuous processes without interruption. use for our processes below and above 1 mbar. Thanks to
its high pumping speed, we can even run two processes
VACUU·PURE can be operated continuously at higher pres- simultaneously.“
sures so that in a drying oven, both the primary drying and
subsequent residual drying steps can be performed with a
single pump. For distillation processes which operate in the
transition range from rough to fine vacuum (10 mbar to 0.1
mbar), VACUU·PURE delivers high pumping speeds at low
pressures combined with high chemical resistance. In freeze
drying, excellent results are achieved during the residual
(aka secondary) drying phase due to VACUU·PURE‘s
impressive ultimate vacuum.

5
Technical Data

Technical data VACUU·PURE® 10C Product name Ord. No.

Max. pumping speed 9 m3/h VACUU·PURE 10C CEE 20751000

5 × 10-3 mbar (at 1013 mbar ambient VACUU·PURE 10C CH 20751001

Ultimate vacuum (abs.)
pressure)
VACUU·PURE 10C UK 20751002
Max. inlet pressure (abs.) atmospheric pressure
VACUU·PURE 10C US 20751003
15 mbar above atmospheric
Max. outlet pressure (abs.)
pressure
VACUU·PURE 10C CN 20751006
Ambient temperature range
10 – 40 °C VACUU·PURE 10C IN 20751007
(operation)

Ambient temperature range Nominal mains voltage / mains frequency

-10 – 60 °C
(storage) 100-230 V, 50/60 Hz

Inlet connection small flange KF DN 25

Outlet connection small flange KF DN 25 Items supplied

Rated motor power 0.7 kW
Pump completely mounted, ready for use,
Protection class IP 20 connection with small flange KF DN 25
Dimensions (L x W x H), approx. 507 × 269 × 413 mm (2x centering and clamping rings included),
with manual. To establish a hose nozzle
Weight, approx. 21,1 kg
connection, suitable KF flanges with hose
Noise (sound pressure level),
52 dBA
nozzle are available for order.
uncertainty 3 dBA

Pumping speed graph Pump down graph (100 l volume)

Pumping speed [m3/h]

Pressure [mbar]

Pressure [mbar] Time [min]

6
Accessories

Accessories general Ord. No.

VACUU·PURE shuttle, mobile underframe for VACUU·PURE 20751800

Inlet separator AK with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE 20751802

Exhaust vapor condenser EK 600 with round bottom flask 500 ml, with KF DN 25, for VACUU·PURE 20751801

PTFE tubing antistatic, KF DN 25/1000 mm 20686033

Exhaust hose PVC, 26/19 mm (length in m) 20686056

Small flange with hose nozzle, DN 25/SW15, PP 20662808

Centering ring KF DN 20/25C, chemically resistant 20635722

Clamping ring, aluminum, KF DN 20/25 20660001

Accessories measurement and control Ord. No.

Vacuum gauge VACUU·VIEW extended, 1100 – 0.001 mbar 20683210

VACUU·SELECT package (stainless steel) for fine vacuum control with VACUU·VIEW extended for KF DN 25 20700110

Accessories VACUU·BUS® and communication Ord. No.

In-line valve VV-B 15C, VACUU·BUS PVDF/PTFE, electromagnetic, DN 25, certification (NRTL): C/US 20674215

Communication Kit, USB VACUU·BUS converter for communication with VACUU·BUS capable devices 20683230

Inlet separator (AK)

(20751802)

VACUU·PURE shuttle Exhaust vapor condenser (EK)

(20751800) (20751801)

7
VACUUBRAND GMBH + CO KG
P.O. Box 1664
97877 Wertheim
T +49 9342 808 5550
F +49 9342 808 5555

[email protected]
www.vacuubrand.com

VACUUBRAND is part of the Brand group, a manufacturer

20996996 © 2022 VACUUBRAND GMBH + CO KG | Printed in Germany | 06/2022

of high-quality and innovative laboratory equipment and
vacuum technology with a global team of approx. 1,000
employees.

With highly motivated and qualified employees, we

manufacture the world's most comprehen­sive product
family for vacuum generation, measurement and control
for the rough and fine vacuum range in the laboratory.

All with one goal:

Enabling our customers to run reliable, safe and efficient
processes. This is why we commit ourselves to continuous
innovation, first-class performance, and outstanding quality.

Engineering excellence is central to our ability to deliver

products and solutions renowned for their quality,
durability, and reliability. Innovative technology, high
quality materials and extensive testing deliver unmatched
performance - engineered and manufactured in Germany.

Together with you, our experts will find the best solution
for your application and provide you with first-class service
along the way.

BRAND (Shanghai) Trading Co., Ltd. BRAND Scientific Equipment Pvt. Ltd. BrandTech® Scientific, Inc.
Shanghai, China Mumbai, India Essex, CT. United States of America

T +86 21 6422 2318 T +91 22 42957790 T +1 860 767 2562

[email protected] [email protected] [email protected]
china.brand.com.cn www.brand.co.in www.brandtech.com