Test Report issued under the responsibility of:

TEST REPORT
EN 60934 / IEC 60934
Circuit-breakers for equipment (CBE)

Report Number. .............................. : 30380370.010

Date of issue ................................... : September 10, 2018
Total number of pages ................... 9 + Attachments 1-2

Applicant’s name ........................... : Carling Technologies, Inc.

Address ........................................... : 60 Johnson Avenue, Plainville CT 06062 USA

Test specification:
Standard ......................................... : EN 60934:2001+A1+A2 / IEC 60934:2000+A1+A2
Test procedure ............................... : T Mark
Non-standard test method ............ : N/A
Test Report Form No. .................... : IEC60934B
(modified for the certification to IEC 60934:2000+A1+A2)
Test Report Form(s) Originator .... : CQC
Master TRF ..................................... : Dated 2014-01
Copyright © 2014 Worldwide System for Conformity Testing and Certification of Electrotechnical
Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the
CB Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description ..................... : Circuit-breaker for Equipment
Trade Mark ...................................... : Carling Technologies
Manufacturer .................................. : Carling Technologies, Inc.
60 Johnson Avenue, Plainville CT 06062 USA
Model/Type reference .................... : 1) A Series: Ad1-d2-d3-d4-d5-d6-d7
2) B Series: Bd1-d2-d3-d4-d5-d6-d7
(see Attachment 1 - Construction Data Form (CDF) for details)
Ratings ............................................ : See next page
 Page 2 of 9 Report No. 30380370.010

Ratings:

Model Designation: 1) A Series: Ad1-d2-d3-d4-d5-d6-d7

2) B Series: Bd1-d2-d3-d4-d5-d6-d7
(see Attachment 1 - Construction Data Form (CDF) for details)

AC Ratings:

Rated Operational Voltage Ue: AC 240 V AC 415 V (3ph)

AC 250 V AC 240/415 V (3ph)
AC 120/240 V

Rated Current In: 0.1 A – 50 A 0.1 A – 30 A

Rated Frequency: 50/60 Hz 50/60 Hz

Rated Switching Capacity: AC 6 x In AC 6 x In

Rated Short Circuit

Capacity Icn: 1) AC 1500 A; (d7 = E, J, R, U) 1) AC 1500 A; (d7 = E, J, R, U)
2) AC 1500 A; (d7 = E, J, R, U, 3) 2) AC 1500 A; (d7 = E, J, R, U, 3)
1) AC 3000 A; (d7 = P)

Rated Conditional Short Circuit

Current Category PC1 Inc1: AC 5000 A AC 3000 A
SCPD: Fuse 63 A Type gL 63 A Type gL
SCPD: Circuit Breaker 100 A Type C 63 A Type C

Rated Insulation Voltage Ui: 250 V 415 V

DC Ratings:

Rated Operational Voltage Ue: DC 80 V 1) DC 65 V

Rated Current In: 0.1 A – 50 A 0.1 A – 50 A

Rated Switching Capacity: DC 4 x In DC 4 x In

Rated Short Circuit

Capacity Icn: 1) DC 1500 A; (d7 = E, J, R, U) DC 3000 A; (d7 = P)
2) DC 1500 A; (d7 = E, J, R, U, 3)

Rated Conditional Short Circuit

Current Category PC1 Inc1: DC 3000 A DC 5000 A
SCPD: Fuse 100 A Type gL 63 A Type gL
SCPD: Circuit Breaker - 100 A Type C

Rated Insulation Voltage Ui: 250 V 250 V

Additional Ratings and Information for all Models:

Electrical endurance: 6000 Cycles

Number of Poles: 1 - 6

TRF No. IEC60934B

 Page 3 of 9 Report No. 30380370.010

Number of Protected Poles: 1 - 6

Mode of Tripping: HM

Degree of Trip-Free Behavior: Positively Trip-Free

Method of Operation: S-type; R-type

Operating Characteristic: See Attachment 1 (Constructional Data Form)

Voltage Release: See Attachment 1 (Constructional Data Form)

Pollution degree: 2

Overvoltage Category: II

Method of Mounting: Panel-mounting Type; Flush Type

Mounting Position: Depended; Vertical Mounting Surface

Protection Against Electric Shock: II (to operating mean);

For use in Class I or Class II equipment

Method of Connection: See Attachment 1 (Constructional Data Form)

Ambient Air Temperature: - 5 ºC to +40 ºC

Electrical Performance:
- For general use, including inductive circuits (Ue=AC 240V, AC 250V, AC 120/240V)
- For use in essentially resistive circuits only (Ue= AC 415V, AC 240/415V, DC 80V, DC 65V)

Suitability for isolation: not suitable

Suitability for use in IT Systems: not suitable

Additional Ratings and Information: See Attachment 1 (Constructional Data Form)

Notes:
The ratings and information indicated above are the same as shown on the originally issued certificate
R72103448 Pages 1-5 (see Attachment 2) with the following additions/changes:
a) Codes R, U and 3 were added to decision d7. They indicate that the CBEs are TUV certified in
combination with CSA and/or UL approvals (see Attachment 1 Constructional Data Form).
b) For consistency with CSA/UL approvals, the following rated operational voltages were added
Ue = AC 240V and Ue = AC 415V. The ratings are covered by the original testing of the CBEs for rated
operational voltages Ue = AC 250V and Ue = AC 240/415V respectively.
c) For consistency with approvals from other test laboratories, Mode of Tripping MO is not included in
this test report and the certification.
d) Ratings and Information for Auxiliary Switches are covered by Attachment 1 Constructional Data
Form.

TRF No. IEC60934B

 Page 4 of 9 Report No. 30380370.010

Testing procedure and testing location: see below

TUV Testing Laboratory: TUV Rheinland of North America, Inc. (TRNA)

12 Commerce Road, Newtown CT 06470 USA
Testing location/ address ....................... : TMP: Carling Technologies, Inc.
60 Johnson Avenue, Plainville CT 06062 USA
(no testing required for this test report EN/IEC 60934)
Associated CB Testing Laboratory: N/A
Testing location/ address ....................... :

Tested by (name + signature) .......... :

Approved by (name + signature) ..... :

Testing procedure: TMP T Mark Procedure

Testing location/ address ....................... : Carling Technologies, Inc.
60 Johnson Avenue, Plainville CT 06062 USA
(for all previous testing)
Tested by (name + signature) .......... : Jan Komarzynski

Approved by (name + signature) ..... : Chan Wang

Testing procedure: WMT N/A

Testing location/ address ....................... :

Tested by (name + signature) .......... :

Witnessed by (name + signature) .... :
Approved by (name + signature) ..... :

Testing procedure: SMT N/A

Testing location/ address ....................... :

Tested by (name + signature) .......... :

Approved by (name + signature) ..... :
Supervised by (name + signature) .. :

TRF No. IEC60934B

 Page 5 of 9 Report No. 30380370.010

List of Attachments (including a total number of pages in each attachment):

1) Constructional Data Form (CDF) with included Catalog Ordering Scheme (COS) - 31 pages.
2) Bauart Certificate R72103448. 0001- R72103448.0005 - 5 pages.

History of the test report:

1) 30380370.001 Original test report. The CBE was tested according to EN

60934:2001.

2) 30380370.002 Covers alternate construction of the actuators for B series of the

CBEs.

3) 30380370.003 This test report covers upgrade of standard to Amendment A1.

4) 30380370.004 This test report covers the evaluation of the alternate construction for
B series CBEs. The alternate construction consists of alternate
terminals for CBE with Rocker type actuator and addition of a
terminal retainer.

5) 30380370.005 This test report covers the evaluation of the alternate construction
for B series CBEs. The alternate construction consists of alternate
terminals for CBE with Handle type actuator and addition of a
terminal retainer.

6) 30380370.006 This test report covers addition of Approval/Agency Code 3 in CDF-

COS Decision 7 for B series CBEs with Handle type of actuator.

7) 30380370.007 Upgrade of standard to Amendment A2.

8) 30380370.008 Addition of Alternate Auxiliary Switch Model SCx-BxA.

9) 30380370.009 Alternate Construction – A Series CBE with Flat Rocker manual

operating means. Update of Codes in Catalog Order Scheme (COS)
for these CBEs.

10) 30380370.010 This test report serves to issue the T Mark type certificate to
IEC 60934 version of the standard.
It is based on the original valid certificate R72103448 (see
Attachment 2), which covers approval of the circuit breakers to
standard EN 60934:2001+A1+A2.
The new T Mark certificate indicates the compliance of the A
Series and B Series circuit breakers with both standards:
IEC 60934:2000+A1+A2 and EN 60934:2001+A1+A2.

Summary of testing:
1) All original testing was done at the manufacturer facility under TPM program.
2) Test reports 30380370.001- 30380370.009 cover evaluation of the CBEs according to standard
EN 60934:2001+A1+A2.
3) This test report 30380370.010 covers additional evaluation of the CBEs according to standard
IEC 60934:2000+A1+A2.
4) Standard EN 60934:2001+A1+A2 is entirely harmonized with standard IEC 60934:2000+A1+A2;
therefore, there is no impact on the test requirements and/or construction of the CBEs regarding the
compliance with both standards IEC 60934:2000+A1+A2 and EN 60934:2001+A1+A2.
Based on the full harmonization of these both standards, no additional testing was required.

TRF No. IEC60934B

 Page 6 of 9 Report No. 30380370.010
Tests performed (name of test and test Testing location:
clause): N/A
No testing is required for this IEC 60934 version of TMP: Carling Technologies, Inc.
the standard. 60 Johnson Avenue, Plainville CT 06062 USA
(for all previous testing)

Summary of compliance with National Differences

List of countries addressed:
There are no National Differences or Group Differences for European countries.
TUV Rheinland certificate R72103448 (see Attachment 2) covers the compliance of the CBEs with
standard EN 60934:2001+A1+A2. Other National Differences were not considered.

The product fulfils the requirements of EN 60934:2001+A1+A2 as indicated on TUV Rheinland

certificate R72103448 (see Attachment 2).

TRF No. IEC60934B

 Page 7 of 9 Report No. 30380370.010

Copy of marking plate:

The artwork below may be only a draft. The use of certification marks on a product must be
authorized by the respective NCBs that own these marks.

Representative copy of marking plate for B Series CBEs.

Remarks:
1. See Attachment 1 (CDF) for rated voltages and rated current ranges.
2. For TRNA approval, the ratings/information on the marking plates to be according to the
ratings/information provided on the T Mark Certificate and in Attachment 1 (CDF).
3. This report is valid as a T Mark Test Report when appended to a T Mark Certificate issued by TRNA.
Based on the above condition, the use of T Mark certification mark on a product is authorized by TRNA.

TRF No. IEC60934B

 Page 8 of 9 Report No. 30380370.010

Test item particulars...................................................: See below

Possible test case verdicts:
- test case does not apply to the test object ........... : N/A
- test object does meet the requirement.................. : P (Pass)
- test object does not meet the requirement ........... : F (Fail)
Testing.......................................................................... : No testing is required for this T Mark approval for
compliance according to standards IEC
60934:2000+A1+A2 and EN 60934:2001+A1+A2.
Date of receipt of test item ........................................ : N/A
Date (s) of performance of tests ............................... : N/A

General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.

Throughout this report a comma / point is used as the decimal separator.

Manufacturer’s Declaration per sub-clause 4.2.5 of IECEE 02:

The application for obtaining a CB Test Certificate Yes
includes more than one factory location and a Not applicable
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory has
been provided ............................................................... :

When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies) .......................... : 1) Carling Technologies, Inc.
60 Johnson Avenue, Plainville CT 06062 USA

2) Interruptores de Mexico, SA de CV
Carretera a La Paz, Km. 1
Matehuala, San Luis Potosi Mexico

3) Carlingswitch Manufacturing
(Zhongshan) Co., Ltd.
Wuguishan Town
Changmingshui Administration Dist.
Zhongshan City, Guangdong China

TRF No. IEC60934B

 Page 9 of 9 Report No. 30380370.010

General product information:

The CBEs are 1-6 pole molded-case circuit breakers intended to provide protection within electrical
equipment to be connected to DC or AC supply.

For details see CDF (Amendment A1) and certificate R72103448 (Amendment A2).

Other details regarding all available options for A Series and B Series CBEs are provided in Carling
Technologies Catalog Ordering Scheme (COS), which is attached to CDF (Amendment A1).

End of Test Report

TRF No. IEC60934B

 Report No. 30380370.010 ATTACHMENT 1 Page 1 of 31
Certificate No. T72182085
Our reference 30380370.010
Appendix No. 1
(To be filled in by TÜV Rheinland)

Constructional Data Form for CBE IEC/EN 60934 Page 1/4

Licenseholder : Carling Technologies, Inc., 60 Johnson Ave. Plainville, CT 06062 USA

Factory : Interruptores de Mexico, SA de CV
Carretera a La Paz, Km. 1, Matehuala, San Luis Potosi Mexico
Carlingswitch Manufacturing (Zhongshan) Co., Ltd. Wuguishan Town
Changmingshui Administration Dist., Zhongshan City, Guangdong China
Type or Model Number : A Series: Ad1-d2-d3-d4-d5-d6-d7; B Series: Bd1-d2-d3-d4-d5-d6-d7
(see Catalog Ordering Scheme (COS) pages 1-27 for details)
Kind of device : Circuit Breakers for Equipment (CBE)
Specification [Main – Circuit]

Type designation 1) A Series: Ad1-d2-d3-d4-d5-d6-d7; 2) B Series: Bd1-d2-d3-d4-d5-d6-d7

Number of poles 1-6

Number of protected poles 1-6

Contact material Silver Alloy

Rated operational voltage Ue AC 240V AC 415V DC 80V 1) DC 65V

AC 250V AC 240/415V
AC 120/240V (3 phase)

Rated current In 0.1A – 50A 0.1A – 30A 0.1A – 50A 0.1A – 50A

Rated frequency 50/60Hz 50/60Hz DC DC

Rated ambient air temp. - 5°C to + 40°C

Rated short-circuit capacity Icn 1) 1500A 1) 1500A 1) 1500A 1) 3000A (d7=P)

(d7=E,J,R,U) (d7=E,J,R,U) (d7=E,J,R,U)
2) 1500A 2) 1500A 2) 1500A
(d7=E,J,R,U,3) (d7=E,J,R,U,3) (d7=E,J,R,U,3)
1) 3000A (d7=P)

Rated conditional short-circuit Inc1 5000A 3000A 3000A 5000A

current
Short-circuit protection device a) 63A Type gL a) 63A Type gL a) 100A Type gL a) 63A Type gL
a) Fuse; b) Circuit Breaker b) 100A Type C b) 63A Type C b) - b) 100A Type C
Rated conditional short-circuit PC PC1
current performance category
Method of operation (CBE) S-type; R-type

Mode of tripping (CBE) HM

Influence of the ambient temp. Not Temperature Dependent

Trip-free behaviour Trip-free

Type of load Ue=AC 240V; AC 250V; AC 120/240V - For general use including inductive circuits
Ue=AC 415V; AC 240/415V; DC 80V; DC 65V - For use in essentially resistive circuits

TÜV Rheinland Group Carling Technologies, Inc. September 10, 2018

(Place) (Date)

9/10/2018
(Date) (Signature) (Stamp and Signature of Applicant)
 Report No. 30380370.010 ATTACHMENT 1 Page 2 of 31
Certificate No. T72182085
Our reference 30380370.010
Appendix No. 1
(To be filled in by TÜV Rheinland)

Constructional Data Form for CBE IEC/EN 60934 Page 2/4

Method of mounting Panel-mounting / Integral-mounting

Method of connection Not associated with the mechanical mounting

Method of disconnection Full-disconnection

Suitability for isolation yes no

Reversibility of connection reversible (Line/Load may be marked) non-reversible

Specification [general]

Circuit Main Auxiliary 1)*

Ui 415V(AC 3ph CBE); 125V

Rated insulation voltage
250V (AC 1ph & DC CBE)

Rated impulse withstand voltage / Uimp 2500V / II (AC CBE); 1500V / II

Overvoltage category 800V / II (DC CBE)

Pollution degree 2 2

IP code IP40 (to front, after building-in)

to front mounting support
Front: 0 mm
to rear mounting support
Minimum mounting distance to conductive
parts Sides: 10.0 mm 2)*
Top/Bottom: 10.0 mm 2)*

Remarks 1) * The following optional certified auxiliary switches can be

provided: a) DB1;DB2: AC125V 1A; DC80V 0.5A;
DB3 AC125V 0.1A; DC80V 0.1A;
b) SCx-BxA series: AC125/250V 10.1RA or 5.0RA or 0.1RA;
AC125V 1/4HP; DC80V 1RA
2) * The distances specified above can be reduced from 10.0 mm
to 5.0 mm if conductive parts in end use equipment are reliably
earthed.

Insulation system

Live parts - ON/OFF operating means: R B NA

Live parts – mounting support: R B NA

Live parts - outside (not accessible after install.) R B NA

Auxiliary Circuit - Main Circuit: R B NA

Explanatory Note: R - Reinforced insulation, B - Basic insulation, NA - Not applicable

TÜV Rheinland Group Carling Technologies, Inc. September 10, 2018

(Place) (Date)

9/10/2018
(Date) (Signature) (Stamp and Signature of Applicant)
 Report No. 30380370.010 ATTACHMENT 1 Page 3 of 31
Certificate No. T72182085
Our reference 30380370.010
Appendix No. 1
(To be filled in by TÜV Rheinland)

Constructional Data Form for CBE IEC/EN 60934 Page 3/4

Terminals [Main circuit]

Type designation A Series: Ad1-d2-d3-d4-d5-d6-d7; B Series: Bd1-d2-d3-d4-d5-d6-d7

Terminal designation Line/Load (reversible)

Type of Terminal See COS

Rated cross sectional area See COS

Type of conductor solid stranded flexible

Max. number of conductors per

Single conductor
terminal

Required preparation of the conductor Conductors to be crimped

Striping length [mm] N/A

According to the manufacturer specification where higher than specified by

Tightening torque [Nm]
the standard

Material/plating terminals Copper Alloy / Bright Acid Tin / Nickel

Material/plating of the screw Copper Alloy / Bright Nickel

Material/plating of the washer Copper Alloy / Bright Acid Tin / Nickel

Material/plating of the pressure plate N/A

TÜV Rheinland Group Carling Technologies, Inc. September 10, 2018

(Place) (Date)

9/10/2018
(Date) (Signature) (Stamp and Signature of Applicant)
 Report No. 30380370.010 ATTACHMENT 1 Page 4 of 31
Certificate No. T72182085
Our reference 30380370.010
Appendix No. 1
(To be filled in by TÜV Rheinland)

Constructional Data Form for CBE IEC/EN 60934 Page 4/4

Insulating Materials
Part Material name Type designation Material Group RTI
Half Shell (Case) UP BMC 605 I (UL 0) 130
PER Dielectrite 48-50 II (UL 1) 130
PER Plenco 08218 IIIa (UL 3) 130
PF Plenco 03303 IIIa (UL 3) 150
PF Durez 156 IIIa (UL 3) 150
PF Plenco 4300 IIIa (UL 3) 150
Bobbin Zytel 101 I (UL 0) 130
Zytel 132F I (UL 0) 130
Valox 310 SEO IIIa (UL 3) 120
Remark: All plastic materials are UL approved.

TYPE NOMENCLATURE:
A Series: Ad1-d2-d3-d4-d5-d6-d7; B Series: Bd1-d2-d3-d4-d5-d6-d7
(see COS for details).

ROUTINE TESTS:
According to Annex J the following routine tests must be performed:
J1. Verification of the tripping characteristic.
CBEs with HM mode of tripping: the tests with the currents of 2 In and of 6 In.
The CBE shall trip within the time limits define by the time-current zone indicated by the manufacturer.

J2. Verification of dielectric strength.

Test voltage 1500V, 50Hz or 60Hz is applied for 1s.
a) CBE in open position: Between line terminals and load terminals.
b) CBE in closed position: between each pole of the CBE in turn and the other poles connected together.

TÜV Rheinland Group Carling Technologies, Inc. September 10, 2018

(Place) (Date)

9/10/2018
(Date) (Signature) (Stamp and Signature of Applicant)
Report No. 30380370.010 ATTACHMENT 1 Page 5 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 1/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No.
A A Series Breaker
Actuator - d1
A1 Indicate OFF, Vertical Legends Visi Rocker
A2 Indicate OFF, Horizontal Legends Visi Rocker
A3 Indicate ON, Vertical Legends Single Color Rocker
A4 Indicate OFF, HorizontalLegends Single Color Rocker
A5 Indicate OFF, Vertical Legends Push to Reset Visi Rocker]
A6 Indicate OFF, Horizontal Legends Push to Reset Visi Rocker]
A7 Vertical Legends Push to Reset - Single Color Rocker
A8 Horizontal Legends Push to Reset - Single Color Rocker
Poles - d1
1 One
2 Two
3 Three
4 Four
5 Five
6 Six
Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
H Dual Coil, Shunt Trip Voltage Coil 4
J Dual Coil, Shunt Trip Voltage Coil - Side Terminal
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve
Current Rating - d4
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0 2
650 50.0 2
Report No. 30380370.010 ATTACHMENT 1 Page 6 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 2/27

Terminal Type - d5
1 = 6.3mm Tab 1
2 = 8-32 Screw with upturned lugs
3 = 8-32 Screw - Bus type w/lock washer
4 = 10-32 Screw w/upturned lugs
5 = 10-32 Screw - Bus type w/lock washer
B = M5 Screw w/upturned lugs
C = M4 Screw with upturned lugs
E = M4 Screw - Bus type w/lock washer
F = M5 Screw w/upturned lugs and 30° bend 5
J = M5 Screw Back Connect 6
K = 10-32 Screw Back Connect 6
L = Solder Lug (12A)
M = M6 Stud w/lock and flat washer
N = M4 Screw Back Connect 6
P = Printed Circuit Terminal 3
Y = 8-32 Screw Back Connect 6

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
Notes: 9 Front panel snap-in - single pole
1 - 32 A maximum J Same as 9 with rocker guard
2- 40 and 50 Amp - 1 pole only Maximum Application Rating (Optional) - d6
3 - 30A max PC or 6.3mm Tab used as PC A 65 V dc
4 - H & J dual coil not available with Hi-Inrush Delay and only C 120/240 V ac
available with Special Catalog Number and 30 A Max. D 240 V ac
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch K 120 V ac 6
6 - 120V is only applicable to UL and CSA M 80 V dc
J 415 V ac
Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only

A 1 1 - B 0 - 24 - 610 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/11/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 7 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 3/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
A A Series Breaker
Actuator - d1
A1 Indicate OFF, Vertical Legends Visi Rocker
A2 Indicate OFF, Horizontal Legends Visi Rocker
A3 Indicate ON, Vertical Legends Single Color Rocker
A4 Indicate OFF, HorizontalLegends Single Color Rocker
A5 Indicate OFF, Vertical Legends Push to Reset Visi Rocker]
A6 Indicate OFF, Horizontal Legends Push to Reset Visi Rocker]
A7 Vertical Legends Push to Reset - Single Color Rocker
A8 Horizontal Legends Push to Reset - Single Color Rocker

Poles - d1
1 One
2 Two
3 Three
Circuit - d2
X Special Catalog Number
Y Special Catalog Number
Auxiliary Switch - d2
0….9 Special Part Number

Frequency and Time Delay - d3

00…99 Special Part Number

Current Rating - d4 2
000…999 Special Part Number
Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 4
M M6 Stud w/lock and flat washer
P Printed Circuit Terminal 3
L Solder Lug (12A)

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Report No. 30380370.010 ATTACHMENT 1 Page 8 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 4/27

Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard
Notes:
1 - 32 A maximum Maximum Application Rating (Optional) - d6
2- 40 and 50 Amp - 1 pole only A 65 V dc
3 - 30A max PC or 6.3mm Tab used as PC C 120/240 V ac
4 - M5 Screw with upturned lugs and 30° bend Not available with Aux Switch D 240 V ac
5 - 120V is only applicable to UL and CSA K 120 V ac 5
M 80 V dc
J 415 V ac

Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only

A K 1 - X 0 - 00 - 000 - 1 B 1 - D U
A d1 d2 d3 d4 d5 d6 d7
08/11/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 9 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 5/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
A A Series Breaker
Actuator - d1
AC Indicate ON, Vertical Legends
AD Indicate ON, Horizontal Legends
AE Indicate ON, No Legends
AF Indicate OFF, Vertical Legends
AG Indicate OFF, Horizontal Legends
AH Indicate OFF, No Legends
AJ Vertical Legends
AK Horizontal Legends
AL No Legends
AN Indicate OFF, Vertical Legends Push to Reset (Visi Rocker)
AO Indicate OFF, Horizontal Legends
AP Indicate ON, No Legends
AR Vertical Legends Push to Reset (Single Color Rocker)
AU Horizontal Legends
AV No Legends
Poles - d1
1 One
2 Two
3 Three
Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
H Dual Coil, Shunt Trip Voltage Coil
J Dual Coil Shunt Trip Side Terminal
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve
Current Rating - d4 2
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0
650 50.0
Report No. 30380370.010 ATTACHMENT 1 Page 10 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 6/27

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 5
M M6 Stud w/lock and flat washer
P Printed Circuit Terminal 3
L Solder Lug (12A)

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard
Report No. 30380370.010 ATTACHMENT 1 Page 11 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 7/27

Maximum Application Rating (Optional) - d6

Notes: A 65 V dc
1 - 32 A maximum C 120/240 V ac
2- 40 and 50 Amp - 1 pole only D 240 V ac
3 - 30A max PC or 6.3mm Tab used as PC K 120 V ac 6
4 - H & J dual coil not available with Hi-Inrush Delay
notand
available
only with auxiliary switch M 80 V dc
available with Special Catalog Number and 30 A Max. J 415 V ac
5. - M5 Screw with upturned lugs and 30° bend
6 - 120V is only applicable to UL and CSA Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only

A K 1 - B 0 - 24 - 610 - 1 B 1 - D U
A d1 d2 d3 d4 d5 d6 d7
07/22/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 12 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 8/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
A A Series Breaker
Actuator - d1
AC Indicate ON, Vertical Legends
AD Indicate ON, Horizontal Legends
AE Indicate ON, No Legends
AF Indicate OFF, Vertical Legends
AG Indicate OFF, Horizontal Legends
AH Indicate OFF, No Legends
AJ Vertical Legends
AK Horizontal Legends
AL No Legends
AN Indicate OFF, Vertical Legends Push to Reset (Visi Rocker)
AO Indicate OFF, Horizontal Legends
AP Indicate ON, No Legends
AR Vertical Legends Push to Reset (Single Color Rocker)
AU Horizontal Legends
AV No Legends
Poles - d1
1 One
2 Two
3 Three
Circuit - d2
X Special Catalog Number
Y Special Catalog Number

Auxiliary Switch - d2
0….9 Special Part Number

Frequency and Time Delay - d3

00…99 Special Part Number

Current Rating - d4 2
000…999 Special Part Number

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 4
M M6 Stud w/lock and flat washer
P Printed Circuit Terminal 3
L Solder Lug (12A)

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Report No. 30380370.010 ATTACHMENT 1 Page 13 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 9/27

Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard

Maximum Application Rating (Optional) - d6

A 65 V dc
C 120/240 V ac
D 240 V ac
K 120 V ac 5
Notes: M 80 V dc
1 - 32 A maximum J 415 V ac
2- 40 and 50 Amp - 1 pole only
3 - 30A max PC or 6.3mm Tab used as PC
4 - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch Approvals - d7
5 - 120V is only applicable to UL and CSA E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only

A K 1 - X 0 - 00 - 000 - 1 B 1 - D U
A d1 d2 d3 d4 d5 d6 d7
07/22/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 14 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 10/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
A A Series Breaker
Actuator - d1
AA Handle, one per pole
AB Handle, one per multipole unit
AS Mid-Trip Actuator
AT Mid-Trip Actuator w/ alarm switch

1 1 Pole
2 2 Pole
3 3 Pole
4 4 Pole
5 5 Pole
6 6 Pole

Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
E Shunt Trip Voltage
H Dual Coil Shunt Trip
Voltage Coil 4
J Dual Coil Shunt Trip
Voltage Coil, 4
Side Terminal
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve

Current Rating - d4 2
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0 2
650 50.0 2
Report No. 30380370.010 ATTACHMENT 1 Page 15 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 11/27

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
6 8-32 Screw with upturned lugs @ 30°
7 8-32 Screw - Bus type w/lock washer @ 30°
8 10-32 Screw w/upturned lugs @ 30°
9 10-32 Screw - Bus type w/lock washer @ 30° 5
A 8-32 Screw with upturned lugs w/ 6.3mm Tab
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
D 10-32 Screw w/upturned lugs w/ 6.3mm Tab
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs @ 30° 5
J M5 Screw Back Connect 6
K 10-32 Screw Back Connect 6
G M5 Screw w/upturned lugs and 30° bend
H M5 Screw - Bus type w/lock and flat washer
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 6
P Printed Circuit Terminal 3
Q Push-in terminal
R M4 Screw with upturned lugs @ 30°
T M4 Screw - Bus type w/lock washer @ 30°
X Mixed Terminals
Y 8-32 Screw Back Connect 6

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d6
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
5 Snap-in, 3/4" wide
6 Snap-in, 3/4" wide with terminal barrier
7 Snap-in, 7/64" overhang
8 Snap-in, 7/64" overhang with terminal barrier
E Snap-in, 3/4"wide with handle guard
F Snap-in, 3/4" wide with handle guard and terminal barrier
G Snap-in, 7/64" overhang with handle guard
H Snap-in, 7/64" overhang w/ handle guard and terminal barrier
J-W Snap-in bracket
X Special color or insert
Report No. 30380370.010 ATTACHMENT 1 Page 16 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 12/27

Notes: Maximum Application Rating (Optional) - d6

1 - 32 A maximum A 65 V dc
2- 40 and 50 Amp - 1 pole only C 120/240 V ac
3 - 30A max PC or 6.3mm Tab used as PC D 240 V ac
4 - H & J dual coil not available with Hi-Inrush Delay and only K 120 V ac 7
available with Special Catalog Number and 30 A Max. M 80 V dc
5. - M5 Screw with upturned lugs and 30° bend J 415 V ac
6 - 30 Amp Max
7 - 120V is only applicable to UL and CSA Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
P TUV Cert. , UL Recognized, CSA Accepted - World Market
U TUV Cert Only

A A 1 - B 0 - 24 - 610 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/05/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 17 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 13/27

A SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
A A Series Breaker
Actuator - d1
AA Handle, one per pole
AB Handle, one per multipole unit
AS Mid-Trip Actuator
AT Mid-Trip Actuator w/ alarm switch

1 1 Pole
2 2 Pole
3 3 Pole
4 4 Pole
5 5 Pole
6 6 Pole

Circuit - d2
X Special Catalog Number
Y Special Catalog Number

Auxiliary Switch - d2
0….9 Special Part Number

Frequency and Time Delay - d3

00…99 Special Part Number

Current Rating - d4 2
000…999 Special Part Number

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
6 8-32 Screw with upturned lugs @ 30°
7 8-32 Screw - Bus type w/lock washer @ 30°
8 10-32 Screw w/upturned lugs @ 30°
9 10-32 Screw - Bus type w/lock washer @ 30° 4
A 8-32 Screw with upturned lugs w/ 6.3mm Tab
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
D 10-32 Screw w/upturned lugs w/ 6.3mm Tab
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs @ 30° 4
J M5 Screw Back Connect 5
K 10-32 Screw Back Connect 5
G M5 Screw w/upturned lugs and 30° bend
H M5 Screw - Bus type w/lock and flat washer
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 5
P Printed Circuit Terminal 3
Q Push-in terminal
R M4 Screw with upturned lugs @ 30°
T M4 Screw - Bus type w/lock washer @ 30°
X Mixed Terminals
Y 8-32 Screw Back Connect
Report No. 30380370.010 ATTACHMENT 1 Page 18 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 14/27

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
6 8-32 Screw with upturned lugs @ 30°
7 8-32 Screw - Bus type w/lock washer @ 30°
8 10-32 Screw w/upturned lugs @ 30°
9 10-32 Screw - Bus type w/lock washer @ 30° 5
A 8-32 Screw with upturned lugs w/ 6.3mm Tab
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
D 10-32 Screw w/upturned lugs w/ 6.3mm Tab
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs @ 30° 5
J M5 Screw Back Connect 6
K 10-32 Screw Back Connect 6
G M5 Screw w/upturned lugs and 30° bend
H M5 Screw - Bus type w/lock and flat washer
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 6
P Printed Circuit Terminal 3
Q Push-in terminal
R M4 Screw with upturned lugs @ 30°
T M4 Screw - Bus type w/lock washer @ 30°
X Mixed Terminals
Y 8-32 Screw Back Connect 6
Notes: A 65 V dc
1 - 32 A maximum C 120/240 V ac
2 - Not Used D 240 V ac
3 - 30A max PC or 6.3mm Tab used as PC K 120 V ac 7
4 - H & J dual coil not available with Hi-Inrush Delay and only M 80 V dc
available with Special Catalog Number and 30 A Max. J 415 V ac
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switvh
6 - 30 Amp Max Approvals - d7
7 - 120V is only applicable to UL and CSA E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
P TUV Cert. , UL Recognized, CSA Accepted - World Market
U TUV Cert Only

A A 1 - X 0 - 00 - 000 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/07/18 JAL
 Report No. 30380370.010 ATTACHMENT 1 Page 19 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 15/27

B SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No.
B B Series Breaker
Actuator - d1
B1 Indicate OFF, Vertical Legends Visi Rocker
B2 Indicate OFF, Horizontal Legends Visi Rocker
B3 Indicate ON, Vertical Legends Single Color Rocker
B4 Indicate OFF, HorizontalLegends Single Color Rocker
B5 Indicate OFF, Vertical Legends Push to Reset Visi Rocker]
B6 Indicate OFF, Horizontal Legends Push to Reset Visi Rocker]
B7 Vertical Legends Push to Reset - Single Color Rocker
B8 Horizontal Legends Push to Reset - Single Color Rocker

Poles - d1
1 One
2 Two
3 Three
4 Four
5 Five
6 Six
Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
H Dual Coil, Shunt Trip Voltage Coil 4
J Dual Coil Shunt Trip Side Terminal
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve
Current Rating - d4
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0 2
650 50.0 2
 Report No. 30380370.010 ATTACHMENT 1 Page 20 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 16/27

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 5
J M5 Screw Back Connect 6
K 10-32 Screw Back Connect 6
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 6
P Printed Circuit Terminal 3
Y 8-32 Screw Back Connect 6
Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard
Notes:
1 - 32 A maximum Maximum Application Rating (Optional) - d6
2- 40 and 50 Amp - 1 pole only A 65 V dc
3 - 30A max PC or 6.3mm Tab used as PC C 120/240 V ac
4 - H & J dual coil not available with Hi-Inrush Delay and only D 240 V ac
available with Special Catalog Number and 30 A Max. K 120 V ac 7
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch M 80 V dc
6 - 30A Max J 415 V ac
7 - 120V is only applicable to UL and CSA
Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

B 1 1 - B 0 - 24 - 610 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/11/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 21 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 17/27

B SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
B B Series Breaker
Actuator - d1
B1 Indicate OFF, Vertical Legends Visi Rocker
B2 Indicate OFF, Horizontal Legends Visi Rocker
B3 Indicate ON, Vertical Legends Single Color Rocker
B4 Indicate OFF, HorizontalLegends Single Color Rocker
B5 Indicate OFF, Vertical Legends Push to Reset Visi Rocker]
B6 Indicate OFF, Horizontal Legends Push to Reset Visi Rocker]
B7 Vertical Legends Push to Reset - Single Color Rocker
B8 Horizontal Legends Push to Reset - Single Color Rocker

Poles - d1
1 One
2 Two
3 Three
Circuit - d2
X Special Catalog Number
Y Special Catalog Number

Auxiliary Switch - d2
0….9 Special Part Number

Frequency and Time Delay - d3

00…99 Special Part Number

Current Rating - d4
000…999 Special Part Number

Terminal Type - d5
1 = 6.3mm Tab 1
2 = 8-32 Screw with upturned lugs
3 = 8-32 Screw - Bus type w/lock washer
4 = 10-32 Screw w/upturned lugs
5 = 10-32 Screw - Bus type w/lock washer
B = M5 Screw w/upturned lugs
C = M4 Screw with upturned lugs
E = M4 Screw - Bus type w/lock washer
F = M5 Screw w/upturned lugs and 30° bend 5
J = M5 Screw Back Connect 6
K = 10-32 Screw Back Connect 6
L = Solder Lug (12A)
M = M6 Stud w/lock and flat washer
N = M4 Screw Back Connect 6
P = Printed Circuit Terminal 3
Y = 8-32 Screw Back Connect 6
Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Report No. 30380370.010 ATTACHMENT 1 Page 22 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 18/27

Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard
Notes: Maximum Application Rating (Optional) - d6
1 - 32 A maximum A 65 V dc
2- Not Used C 120/240 V ac
3 - 30A max PC or 6.3mm Tab used as PC D 240 V ac
4 - Not Used K 120 V ac 7
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch M 80 V dc
7 - 120V is only applicable to UL and CSA J 415 V ac

Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

B 1 1 - X 0 - 00 - 000 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/11/2018 JAL
 Report No. 30380370.010 ATTACHMENT 1 Page 23 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 19/27

B SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
B B Series Breaker
Actuator - d1
BA Handle, one per pole
BB Handle, one per multipole unit
BS Mid-Trip Actuator
BT Mid-Trip Actuator w/ alarm switch

1 1 Pole
2 2 Pole
3 3 Pole
4 4 Pole
5 5 Pole
6 6 Pole

Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
E Shunt Trip Voltage
H Dual Coil Shunt Trip Voltage Coil 4
J Dual Coil Shunt Trip Voltage Coil, Side Terminal 4
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve
Current Rating - d4 2
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0 2
650 50.0 2
Report No. 30380370.010 ATTACHMENT 1 Page 24 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 20/27

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
6 8-32 Screw with upturned lugs @ 30°
7 8-32 Screw - Bus type w/lock washer @ 30°
8 10-32 Screw w/upturned lugs @ 30°
9 10-32 Screw - Bus type w/lock washer @ 30° 5
A 8-32 Screw with upturned lugs w/ 6.3mm Tab
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
D 10-32 Screw w/upturned lugs w/ 6.3mm Tab
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs @ 30° 5
J M5 Screw Back Connect 6
K 10-32 Screw Back Connect 6
G M5 Screw w/upturned lugs and 30° bend
H M5 Screw - Bus type w/lock and flat washer
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 6
P Printed Circuit Terminal 3
Q Push-in terminal
R M4 Screw with upturned lugs @ 30°
T M4 Screw - Bus type w/lock washer @ 30°
X Mixed Terminals
Y 8-32 Screw Back Connect 6
Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d6
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
5 Snap-in, 3/4" wide
6 Snap-in, 3/4" wide with terminal barrier
7 Snap-in, 7/64" overhang
8 Snap-in, 7/64" overhang with terminal barrier
E Snap-in, 3/4"wide with handle guard
F Snap-in, 3/4" wide with handle guard and terminal barrier
G Snap-in, 7/64" overhang with handle guard
H Snap-in, 7/64" overhang w/ handle guard and terminal barrier
J-W Snap-in bracket
X Special color or insert
 Report No. 30380370.010 ATTACHMENT 1 Page 25 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 21/27

Maximum Application Rating (Optional) - d6

Notes: A 65 V dc
1 - 32 A maximum C 120/240 V ac
2- 40 and 50 Amp - 1 pole only D 240 V ac
3 - 30A max PC or 6.3mm Tab used as PC K 120 V ac 7
4 - H & J dual coil not available with Hi-Inrush Delay and only M 80 V dc
available with Special Catalog Number and 30 A Max. J 415 V ac
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch Approvals - d7
6 - 30 Amp Max E TUV Cert. , UL Recognized, CSA Accepted
7 - 120V is only applicable to UL and CSA J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

B A 1 - B 0 - 24 - 610 - 1 B 1 - D U
B d1 d2 d3 d4 d5 d6 d7
08/05/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 26 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 22/27

B SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
B B Series Breaker
Actuator - d1
BA Handle, one per pole
BB Handle, one per multipole unit
BS Mid-Trip Actuator
BT Mid-Trip Actuator w/ alarm switch

1 1 Pole
2 2 Pole
3 3 Pole
4 4 Pole
5 5 Pole
6 6 Pole

Circuit - d2
X Special Catalog Number
Y Special Catalog Number
Auxiliary Switch - d2
0….9 Special Part Number
Frequency and Time Delay - d3
00…99 Special Part Number
Current Rating - d4 2
000…999 Special Part Number
Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
6 8-32 Screw with upturned lugs @ 30°
7 8-32 Screw - Bus type w/lock washer @ 30°
8 10-32 Screw w/upturned lugs @ 30°
9 10-32 Screw - Bus type w/lock washer @ 30° 4
A 8-32 Screw with upturned lugs w/ 6.3mm Tab
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
D 10-32 Screw w/upturned lugs w/ 6.3mm Tab
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs @ 30° 4
J M5 Screw Back Connect 5
K 10-32 Screw Back Connect 5
G M5 Screw w/upturned lugs and 30° bend
H M5 Screw - Bus type w/lock and flat washer
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 5
P Printed Circuit Terminal 3
Q Push-in terminal
R M4 Screw with upturned lugs @ 30°
T M4 Screw - Bus type w/lock washer @ 30°
X Mixed Terminals
Y 8-32 Screw Back Connect
Report No. 30380370.010 ATTACHMENT 1 Page 27 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 23/27

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard

Maximum Application Rating (Optional) - d6

Notes: A 65 V dc
1 - 32 A maximum C 120/240 V ac
2 - 40 and 50 Amp - 1 pole only D 240 V ac
3 - 30A max PC or 6.3mm Tab used as PC K 120 V ac 6
4 - M5 Screw with upturned lugs and 30° bend not available with Aux Swich M 80 V dc
5 - 30A Max J 415 V ac
6- 120V is only applicable to UL and CSA
Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

A K 1 - X 0 - 00 - 000 - 1 B 1 - D U
A d1 d2 d3 d4 d5 d6 d7
08/07/18 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 28 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 24/27

B SERIES BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
B B Series Breaker
Actuator - d1
BC Indicate ON, Vertical Legends Visi Rock
BD Indicate ON, Horizontal Legends Visi Rock
BE Indicate ON, No Legends Visi Rock
BF Indicate OFF, Vertical Legends Visi Rock
BF Indicate OFF, Horizontal Legends Visi Rock
BG Indicate OFF, No Legends Single Color
BJ Vertical Legends Single Color
BK Horizontal Legends Single Color
BL No Legends Single Color
BN Indicate OFF, Vertical Legends Push to Reset (Visi Rocker)
BO Indicate OFF, Horizontal Legends
BP Indicate ON, No Legends
BR Vertical Legends Push to Reset (Single Color Rocker)
BU Horizontal Legends
BV No Legends
Poles - d1
1 One
2 Two
3 Three
Circuit - d2
A Switch Only
B Series Trip Current
C Series Trip Voltage
D Shunt Trip Current
H Dual Coil, Shunt Trip Voltage Coil 4
J Dual Coil, Shunt Trip Voltage Coil - Side Terminal 4
Auxiliary Switch - d2
0 w/o Auxiliary Switch
2 0.110"; 2.8mm Fast on SPDT
3 0.139" Solder Terminal SPDT
4 0.110"; 2.8mm Fast on SPDT - Gold Contacts
5 0.110"; 2.8mm Fast on SPST N.O. Gold Contacts
6 0.139" Solder Terminal SPST
7 0.110"; 2.8mm Fast on SPST Gold Contacts
8 0.187"; 4.8mm Fast on SPST
9 0.187"; 4.8mm Fast on SPDT
Frequency and Time Delay - d3
10 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 50/60 Hz Instantaneous
21 50/60 HZ Ultrashort
22 50/60 Hz Short
24 50/60 Hz Medium
26 50/60 Hz Long
32 DC and 50/60 Hz Short
34 DC and 50/60 Hz Medium
36 DC and 50/60 Hz Long
42 50/60 Hz Short - Hi-Inrush
44 50/60 Hz Meduim - Hi-Inrush
46 50/60 Hz Long - Hi-Inrush
52 DC Short - Hi-Inrush
54 DC Medium - Hi-Inrush
56 DC Long - Hi-Inrush
03 DC and 50/60 Hz for switch only
SD DC; 50/60 Hz Special Curve
Current Rating - d4 2 Note
210 0.10
225 0.25
250 0.50
275 0.75
410 1.00
425 2.50
450 5.00
475 7.50
610 10.0
615 15.0
620 20.0
625 25.0
630 30.0
640 40.0 2
650 50.0 2
Report No. 30380370.010 ATTACHMENT 1 Page 29 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 25/27

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 5
J M5 Screw Back Connect 6
K 10-32 Screw Back Connect 6
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 6
P Printed Circuit Terminal 3
Y 8-32 Screw Back Connect 6
Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
Notes: J Same as 9 with rocker guard
1 - 32 A maximum
2- 40 and 50 Amp - 1 pole only Maximum Application Rating (Optional) - d6
3 - 30A max PC or 6.3mm Tab used as PC A 65 V dc
4 - H & J dual coil not available with Hi-Inrush Delay and only C 120/240 V ac
available with Special Catalog Number and 30 A Max. D 240 V ac
5. - M5 Screw with upturned lugs and 30° bend not available with auxiliary switch K 120 V ac 7
6 - 30A Max M 80 V dc
7 - 120V is only applicable to UL and CSA J 415 V ac
Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

B K 1 - B 0 - 24 - 610 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
08/07/2018 JAL
Report No. 30380370.010 ATTACHMENT 1 Page 30 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 26/27

B SERIES CIRCUIT BREAKER - IEC/EN 60934 CDF ATT.

Type No. -
B B Series Breaker
Actuator - d1
BC Indicate ON, Vertical Legends Visi Rocker
BD Indicate ON, Horizontal Legends Visi Rocker
BE Indicate ON, No Legends Visi Rocker
BF Indicate OFF, Vertical Legends Visi Rocker
BF Indicate OFF, Horizontal Legends Visi Rocker
BG Indicate OFF, No Legends Single Color
BJ Vertical Legends Single Color
BK Horizontal Legends Single Color
BL No Legends Single Color
BN Indicate OFF, Vertical Legends Push to Reset (Visi Rocker)
BO Indicate OFF, Horizontal Legends
BP Indicate ON, No Legends
BR Vertical Legends Push to Reset (Single Color Rocker)
BU Horizontal Legends
BV No Legends

Poles - d1
1 One
2 Two
3 Three
Circuit - d2
X Special Catalog Number
Y Special Catalog Number

Auxiliary Switch - d2
0….9 Special Part Number

Frequency and Time Delay - d3

00…99 Special Part Number

Current Rating - d4 2
000…999 Special Part Number

Terminal Type - d5
1 6.3mm Tab 1
2 8-32 Screw with upturned lugs
3 8-32 Screw - Bus type w/lock washer
4 10-32 Screw w/upturned lugs
5 10-32 Screw - Bus type w/lock washer
B M5 Screw w/upturned lugs
C M4 Screw with upturned lugs
E M4 Screw - Bus type w/lock washer
F M5 Screw w/upturned lugs and 30° bend 2
J M5 Screw Back Connect 4
K 10-32 Screw Back Connect 4
L Solder Lug (12A)
M M6 Stud w/lock and flat washer
N M4 Screw Back Connect 4
P Printed Circuit Terminal 3
Y 8-32 Screw Back Connect 4
X Mixed Terminals
Report No. 30380370.010 ATTACHMENT 1 Page 31 of 31

COS Cert. No. T72182085 File No. 30380370.010 Page 27/27

Handle Color/Legend - d5
Handle Color I-O ON-OFF Dual Legend Color
A White X Black
C Black X White
F Red X White
H Green X White
K Blue X White
M Yellow X Black
P Gray X Black
R Orange X Black
T Black Short Handle X White
B White X Black
D Black X White
G Red X White
J Green X White
L Blue X White
N Yellow X Black
Q Gray X Black
S Orange X Black
1 White X Black
2 Black X White
3 Red X White
4 Green X White
5 Blue X White
6 Yellow X Black
7 Gray X Black
8 Orange X Black
Mounting Inserts - d5
0 Special rocker bracket without mounting inserts
1 6-32 thread insert
A Same as 1 with terminal barrier on multipole
2 M3 x 5mm insert
B Same as 2 with terminal barrier on multipole
3 6-32 thread with rocker guard or push to reset
C Same as 3 with terminal barrier on multipole
4 M3 x 5mm insert with rocker guard or push to reset
D Same as 4 with terminal barrier on multipole
7 Front panel snap-in with terminal barrier on multipole
G Same as 7 with rocker guard
8 Front panel snap-in - multipole
H Same as 8 with rocker guard
9 Front panel snap-in - single pole
J Same as 9 with rocker guard
Notes: X Special Color or Insert
1 32 A Maximum Maximum Application Rating (Optional) - d6
2 M5 Screw with upturned lugs and 30° bend A 65 V dc
not available with auxiliary switch C 120/240 V ac
3 30 A max. PC or 6.3 mm Tab used as PC Terminal D 240 V ac
4 30 A Max. K 120 V ac 5
5 120V is only applicable to UL and CSA M 80 V dc
J 415 V ac

Approvals - d7
E TUV Cert. , UL Recognized, CSA Accepted
J TUV Cert., UL Listed, CSA Certified
R TUV Cert. , UL Listed with Recognized Construction, CSA
U TUV Cert Only
3 TUV Cert., UL Listed, cUL

B K 1 - X 0 - 00 - 000 - 1 B 1 - D U
d1 d2 d3 d4 d5 d6 d7
07/22/2018 JAL
Report No. 30380370.010 ATTACHMENT 2 Page 1 of 5
Report No. 30380370.010 ATTACHMENT 2 Page 2 of 5
Report No. 30380370.010 ATTACHMENT 2 Page 3 of 5
Report No. 30380370.010 ATTACHMENT 2 Page 4 of 5
Report No. 30380370.010 ATTACHMENT 2 Page 5 of 5