Transport Incubator
An Australian owned and operated company
Enables quick transportation and high quality care
during emergencies.
Ease of treatment
Mobility
High stability
Light weight and compact size
Ease of treatment Approx.60kg
V-808 IncuArch
The weight of main unit is approx.25kg.
Light weight and compact design.
*Weight when one battery is installed.
Battery life comparison 5
360min
3 4
180min 180min
1 2
90min 90min
1 V-808, 1 set Lead acid battery
2 IncuArch, 1 pce Lead-acid battery
3 IncuArch, 2 pcs Lead-acid battery
4 IncuArch, 1 pce Lithium-ion battery
5 IncuArch, 2 pcs Lithium-ion battery
Mobility Either Lithium-ion battery pack or Lead-acid battery
pack can be selected. The maximum 360 min battery
life can be realized.
Securely holds infant’s body
High stability
Easy-to-observe hood Constant monitoring of Large operative field,
vital signs accessible from both sides
An infant can be secured in a particular position by
the soft infant fixing belts (non-woven fabric) and the
soft fence. In the unlikely event of sudden breaking
during transportation or an accident, the infant is
protected from the shock.
*The soft fence is optional.
Reduced vibration
Small sway
The size of the lighting lamp has been The operation panel is placed at the side of The body size has been reduced while
reduced in order to eliminate obstacles to the infant’s head for easy observation of maintaining the same operative field range
Large sway
sight. Unevenness of the hood surface has vital signs even during treatment. as that of conventional models. Snap-open
been significantly reduced to make it easier access ports are placed at the head and
to give a blanket bath. foot sides of the hood to enable easy Vibration during transportation is suppressed by the
access from both ends. cushion rubber, reducing stress on the infant.
Products Lineup Add-on units
Code No. 62101 IncuArch Code No. 62110 SpO2 unit (Masimo)
Code No. 62111 SpO2 unit (Nellcor)
Code No. 62112 O2 monitor
Specifications
Rating voltage: AC100 - 240V +/-10%
Power source Power consumption: 220VA
Frequency: 50/60Hz
Type of protection: Class I, internally powered
Classification
Degree of protection: Type BF, - applied part
Temp setting range 23.0 - 38.0℃ (0.1℃ increments)
Excessive temp, set temp, Skin temp, fan, system, low battery
Alarm (Option: SpO 2 upper/lower, pulse rate upper/lower/loss, SpO 2 sensor,
SpO 2 cable, inernal error, O 2 upper/lower, O 2 sensor)
Main unit: W975 x D475 x H435mm
Dimensions, Weight Mattress: W620 x D330 x H30mm
Weight: approx. 25kg (main unit)
Dust cover .......................................................................................... 1
Dispo safety band ...............................................................................3
Pneumoclean (Electrostatic air filter) ................................................... 1
Accessories
Skin temperature probe ...................................................................... 1
Operation Manual ................................................................................ 1
Semi-iris access port cover ................................................................. 4
Options & Supplies
Code No. 22043 Code No. 22044 Code No. 22045 Code No. 22049
HL Stand for IncuArch Cabinet Stand for IncuArch Bumper for Cabinet Stand Multi-purpose Pole for
IncuArch
Code No. 22046 Safety support mattress
Code No. 22047 Dispo safety band
Code No. 22048 Lithium-ion battery pack
Code No. 22052 Multi-purpose platform
Code No. 22053 Multi-purpose pole for multi-purpose platform
Code No. 22054 Monitor table for multi-purpose platform
Code No. 22055 Cylinder holder for 150L cylinder
Pole mounting type)
Code No. 22050 Code No. 22051
Multi-purpose Pole for Crank Type Multi-purpose
HL Stand Pole for Cabinet Stand
PD276
Scan QR code
to download pdf
