UNIT-1

1.Write down the Objectives of DBMS.

Here are the main objectives of a Database Management System (DBMS):

1. Data Abstraction and Independence
 Objective: Simplify data handling by abstracting the physical details and providing a
logical view of data.
 Explanation: DBMS hides the complex storage details and offers users a simplified
interface to interact with data.
2. Efficient Data Storage and Retrieval
 Objective: Provide efficient storage, access, and retrieval mechanisms.
 Explanation: DBMS uses indexing, caching, and optimized algorithms to handle
large amounts of data.
 enables quick access to information and efficient storage management.
3. Data Integrity and Accuracy
 Objective: Ensure that data is accurate, consistent, and free from corruption.
 Explanation: DBMS enforces constraints, such as primary keys, foreign keys, and
unique constraints, to maintain data quality and avoid redundancy.
4. Data Security and Privacy
 Objective: Restrict unauthorized access and protect sensitive information.
 Explanation: DBMS offers various security mechanisms, including user
authentication, access control, and data encryption, ensuring that only authorized
users can access or modify data.
5. Data Consistency and Concurrent Access
 Objective: Enable multiple users to access data concurrently without inconsistence.
 Explanation: DBMS employs concurrency control to allow multiple users to access
data simultaneously while maintaining data consistency.
6. Backup and Recovery Management
 Objective: Ensure data availability and protection in case of system failures.
 Explanation: DBMS provides tools for regular data backups and recovery processes
to restore data after crashes or system failures.

2.Write a short note on Building blocks of ER Diagram .

Building Blocks of an ER Diagram

An Entity-Relationship (ER) Diagram is a tool used to model the data structure of a system
by visually representing entities, their attributes, and relationships. The main building blocks
of an ER Diagram are:

1. Entities: These represent objects or concepts that hold data.

Entities are usually depicted as rectangles and could represent people, places,
things, or events relevant to the system.
Each entity has a unique identifier known as a primary key.
2. Attributes: Attributes are characteristics of an entity. They describe information about the
entity and are typically represented as ovals connected to their entity. Attributes can be of
different types:
- Simple Attributes: Cannot be divided further (e.g., First Name).
- Composite Attributes: Can be subdivided (e.g., Full Address split into Street, City, Zip).
- Derived Attributes: Values that can be calculated from other attributes (e.g., Age from
Date of Birth).
- Multivalued Attributes: Can hold multiple values (e.g., a person's multiple phone
numbers).

3. Relationships: These define how entities are related to each other. Relationships are
represented by diamonds and connect entities, showing their association. Relationships have
degrees (like binary or ternary) and cardinalities that specify the number of entities involved
(e.g., one-to-one, one-to-many, many-to-many).

Primary Key: A unique identifier for an entity that ensures each record can be distinguished
from others. It is typically underlined in the ER Diagram.

Foreign Key: A field in one entity that links to the primary key of another entity, establishing
a relationship between the two entities.

ER DIAGRAM

2B) Explain E-R model with an example

o ER model stands for an Entity-Relationship model. It is a high-level data model. This

model is used to define the data elements and relationship for a specified system.
o It develops a conceptual design for the database. It also develops a very simple and easy to
design view of data.
o In ER modeling, the database structure is portrayed as a diagram called an entity-
relationship diagram.
Components
ER diagram basically having three components:
• Entities − It is a real-world thing which can be a person, place, or even a concept. For
Example: Department, Admin, Courses, Teachers, Students, Building, etc are some of the
entities of a School Management System.
• Attributes − An entity which contains a real-world property called an attribute. For
Example: The entity employee has the property like employee id, salary, age, etc.
• Relationship − Relationship tells how two attributes are related. For Example: Employee
works for a department.

The advantages of ER are as follows −

• The ER model is easy to build.
• This model is widely used by database designers for communicating their ideas.
Disadvantages
The disadvantages of ER are as follows −
• There is no Data Manipulation Language (DML).
• There is limited relationship representation.
Take your own example and explain

3.Explain the various classifications of database architecture.

Database Architecture

Database architecture refers to the design and structure of a database system, including how
data is stored, accessed, and managed.
There are different types of database architectures, each suited for different needs and
scenarios. The most commonly used architectures are:

1. One-Tier (Single-Tier) Architecture

Definition:
In a one-tier architecture, the database and the user interface (UI) exist on the same system.
The application, database management system (DBMS), and data storage are all handled on a
single platform.

Advantages:
- Simplicity: easy to implement.
- Cost-Effective: Because the system is less complex and maintenance costs are low.

Disadvantages:
- Limited Performance: The system’s performance might degrade as it has to manage both the
application and the database on a single machine.
- Lack of Flexibility: A single-tier architecture is less flexible,

2. Two-Tier Architecture

Definition:
In two-tier architecture, the database and the application are separated. The client (user
interface) communicates directly with the database server, which handles the DBMS.
 Components:
- Client Tier: This is the user interface where users interact with the application.
- Database Server Tier: This layer is responsible for managing the database, handling queries,
and storing data.

Advantages:
- Improved Performance: Since the application and database are separate, they can be
optimized individually for performance.
- Better Scalability: The architecture can scale better than one-tier systems

Disadvantages:
- Limited Scalability: While better than one-tier, two-tier architecture may still struggle with
handling a large number of clients simultaneously.
- Security Risks: Direct communication between the client and the database server can
expose sensitive data to potential security threats.

3. Three-Tier Architecture

Definition:
Three-tier architecture involves three separate layers: the presentation layer, the logic layer,
and the data layer. This is one of the most common architectures used in modern web
applications.

Components:
1. Presentation Layer: This is the client-side user interface (UI), such as a web or mobile app,
that users interact with.
2. Logic Layer: This middle layer contains the business logic or application logic, usually
implemented as a web server or an application server.
3. Data Layer: The data layer is where the DBMS resides, responsible for storing and
retrieving data.

Advantages:
- Flexibility: The logic layer separates the business logic from the UI and database, making it
easier to modify and update without affecting the entire system.
- Security: Communication between the client and database is mediated through the
application layer, providing an additional layer of security.

Disadvantages:
- Complexity: With three separate layers, the architecture becomes more complex, requiring
more careful planning and management.
- Higher Costs: The increased infrastructure, maintenance, and development costs make this
architecture more expensive than simpler ones.

4. Multi-Tier Architecture
Definition:
Multi-tier architecture is an extension of the three-tier architecture, where the system is
divided into multiple layers, each serving a specific purpose.
Typically used for large-scale enterprise applications, it can have many more than three
layers, each performing specialized functions like caching, business logic, and transaction
management.

Advantages:
- High Scalability: Each tier can be independently scaled to handle large amounts of data,
requests, and users.
- Fault Tolerance: Failure in one tier does not necessarily affect the entire system, improving
the system’s reliability.

Disadvantages:
- Very Complex: Managing multiple layers requires a high level of expertise and resources.
- Costly: Building and maintaining a multi-tier architecture is expensive in terms of hardware
and software

4.Discuss in detail about Components of DBMS.

Components of a Database Management System (DBMS)

A Database Management System (DBMS) is a software system used to manage and

manipulate databases. It consists of several components that work together to enable efficient
data storage, retrieval, and manipulation. Here’s a detailed discussion of the core components
of a DBMS:

1. Database Engine

Definition:
The Database Engine is the core component of the DBMS that handles the storage, retrieval,
and updating of data. It processes requests from applications or users and interacts with the
database's storage to perform various operations such as querying, inserting, updating, and
deleting data.

Functions:
- Data Storage Management: It organizes how data is stored in the database and manages
access to the physical storage.
- Query Processing: The engine interprets and executes SQL queries to retrieve or manipulate
data.
- Transaction Management: Ensures that database operations are executed correctly and that
they are atomic, consistent, isolated, and durable (ACID properties).

Example:
In relational DBMS systems, popular database engines include MySQL, PostgreSQL, Oracle,
and SQL Server.
2. Database Management and Query Processor

Definition:
The Query Processor translates SQL queries into low-level commands that the database
engine can execute. The query processor includes several stages: parsing, optimization, and
execution.

Functions:
- Parsing: Analyzes SQL queries for syntax and checks them for correctness.
- Query Optimization: Determines the most efficient way to execute a query (e.g., choosing
the best index or join strategy).
- Execution: Executes the query by interacting with the storage engine to fetch or modify
data.

Example:
When a user submits a SQL query, the query processor parses it, checks for errors, optimizes
the execution plan, and retrieves the requested data.

3. Data Dictionary (Metadata)

Definition:
The Data Dictionary (or Metadata Repository) is a centralized collection of metadata-data’s
about the data. It stores definitions and properties of the database's objects such as tables,
columns, indexes, and relationships.

Functions:
- Access Control: It may store information about user privileges and access control.
- Tracking Changes: Keeps track of changes to the database schema over time, such as the
creation of new tables or modifications to existing ones.

Example:
The metadata for a Customer table might include information such as column names
("CustomerID," "FirstName," "LastName"), data types (integer, varchar), and any constraints
(e.g., CustomerID as a primary key).

4.Data Storage Management

Definition:
The Data Storage Management component is responsible for managing the physical storage
of data. It involves how data is stored on disk, organized, and retrieved in an efficient manner.

Functions:
- File Management: Determines how data is physically stored, usually in data files on a disk.
- Indexing: Helps improve the speed of data retrieval by creating and maintaining indexes on
frequently queried fields.
- Buffer Management: Uses memory buffers to temporarily store data retrieved from the disk
to reduce the number of disk I/O operations.
- Data Compression: May involve techniques to reduce the physical storage requirements by
compressing the data.

Example:
In a relational DBMS, data for each table is stored in a file, and indexes may be created on
key columns (e.g., an index on the CustomerID in a Customers table).

5.What are the advantages of DBMS? Explain.

Advantages of DBMS

A Database Management System (DBMS) offers several key benefits over traditional file-
based systems. Below are the primary advantages of using a DBMS:

1. Data Redundancy Control

- Explanation: DBMS minimizes data redundancy (duplication of data) by storing data
centrally. This ensures that the same data is not repeated across multiple files.
- Benefit: Reduces storage space, improves data integrity, and avoids inconsistencies.

2. Data Integrity and Accuracy

- Explanation: DBMS enforces data integrity rules, such as primary keys, foreign keys, and
check constraints, ensuring that only valid data is entered into the database.
- Benefit: Guarantees high data accuracy and consistency across the database.

3. Improved Data Security

- Explanation: DBMS provides robust security features, such as user authentication, access
control, and data encryption, to protect sensitive data from unauthorized access.
- Benefit: Ensures that only authorized users can access or modify sensitive data, improving
data privacy.

4. Data Independence
- Explanation: DBMS separates the data from application programs, meaning that changes
in the data structure do not affect the application programs.
- Benefit: Enables flexibility and simplifies application development and maintenance.

5. Efficient Data Retrieval

- Explanation: DBMS uses advanced indexing, query optimization, and search algorithms
to ensure quick data retrieval, even with large datasets.
- Benefit: Provides faster access to data, improving overall system performance.
6. Concurrent Access
- Explanation: DBMS allows multiple users to access the database simultaneously while
ensuring that data remains consistent and transactions are isolated.
- Benefit: Supports multi-user environments and enhances collaboration without causing
data conflicts.
 7. Backup and Recovery
- Explanation: DBMS provides automated tools for regular backups and disaster recovery,
ensuring that data is not lost in case of system failure or corruption.
- Benefit: Enhances data reliability and availability by ensuring that data can be restored to
a consistent state.

Unit -2

1. Structure of a Relational Database?

A relational database is structured around tables, which consist of rows and columns. The key
elements in a relational database structure include:

1. Tables (Relations)

- Definition: A table is the fundamental unit of data storage in a relational database. It stores
data in rows (also called records or tuples) and columns (attributes or fields).

- Structure:
- Rows: Each row represents a unique record or instance of an entity (e.g., a row in the
Customers table represents a single customer).
- Columns: Each column represents a specific attribute of the data (e.g., the column
CustomerName represents the name of a customer).

2. Attributes (Fields or Columns)

- Definition: Attributes are the characteristics of an entity that are represented as columns in a
table.

- Structure:
- Each attribute (column) has a defined data type (e.g., `INTEGER`, `VARCHAR`,
`DATE`).
- Attributes must follow constraints like NOT NULL, UNIQUE or DEFAULT.

- Example: In a Products table, columns might include `ProductID`, `ProductName`, `Price`,

and `StockQuantity`.

3. Tuples (Rows or Records)

- Definition: A tuple is a single entry or record in a table, representing a specific instance of

the entity being described.

- Structure:
- A tuple is a set of values for the attributes (columns).
 - Each row has a unique combination of values for the columns.

- Example: A row in the Employees table might look like:

(EmployeeID: 101, FirstName: John, LastName: Doe, Position: Manager)

4. Primary Key

- Definition: A Primary Key is a column or set of columns that uniquely identifies each row
in a table. No two rows can have the same value for the primary key.

- Purpose: Ensures data integrity by preventing duplicate records in a table.

- Example: In a Customers table, `CustomerID` might be the primary key.

5. Foreign Key

- Definition: A Foreign Key is a column or set of columns that establishes a link between the
data in two tables. It references the primary key of another table.

- Purpose: Maintains relation between tables by ensuring that the foreign key value in one
table matches a primary key value in another.

- Example: In an Orders table, the column `CustomerID` might be a foreign key referencing
the `CustomerID` in the Customers table.

6. Indexes

- Definition: An index is a database object that improves the speed of data retrieval operations
on a table.

- Purpose: Indexes allow for quick searches and retrieval of data

- Example: An index on the `ProductID` column in a Products table allows faster retrieval of
product data based on the product ID.

7. Constraints

- Definition: Constraints are rules applied to the columns in a table to enforce data integrity
and consistency.

- Types:
- NOT NULL: Ensures that a column cannot have a NULL value.
- UNIQUE: Ensures that all values in a column are distinct.
 - CHECK: Ensures that the values in a column meet a specific condition.
- DEFAULT: Specifies a default value for a column when no value is provided.

2. Relational Algebra Operations (Detailed Overview)?

Relational algebra is a formal language used to query and manipulate relational databases. It
consists of a set of operations that take one or two relations as input and produce a new
relation as output. These operations are fundamental to the functionality of a Relational
Database Management System (RDBMS). The main relational algebra operations include:

1. Select (σ)

- Purpose: The Select operation is used to retrieve rows (tuples) from a relation that satisfy a
given condition.

- Syntax:

σ_condition(Relation)

- Description: Selects the rows from the input relation that match the specified condition
(predicate). The result is a subset of the original relation with rows that satisfy the condition.

- Example:
If we have a Students table, we can select students who are older than 20:

σ_age > 20(Students)

- Result: This returns all rows from Students where `age > 20`.

2. Project (π)

- Purpose: The Project operation is used to retrieve specific columns (attributes) from a
relation essentially "filtering" the columns.

- Syntax:

π_column1, column2,...(Relation)

- Description: Projects a relation onto a subset of its attributes (columns). The result is a
relation with only the specified columns and without duplicates.

- Example:
If we want to see only the names and ages of students in the Students table:
π_name, age(Students)
- Result: This returns a relation with just the `name` and `age` columns from the Students
table.

3. Union (∪)

- Purpose: The Union operation combines the results of two relations, removing duplicate
rows.

- Syntax:

Relation1 ∪ Relation2

- Description: The union operation combines the tuples of two relations, The result includes
all tuples from both relations without duplication.

- Example:
If we have two relations, TableA and TableB, with similar columns:

TableA ∪ TableB

- Result: This returns a relation with all unique tuples from both TableA and TableB.

4. Set Difference (−)

- Purpose: The Set Difference operation returns the rows that are in one relation but not in
another.

- Syntax:

Relation1 − Relation2

- Description: The set difference returns tuples from the first relation that are not present in
the second relation. The two relations must be union-compatible.

- Example:
If we have two relations, Students and Graduates, we can find the students who have not
graduated:
Students − Graduates

- Result: This returns a relation with all students who are not in the Graduates table.

5. Intersection (∩)

- Purpose: The Intersection operation returns the common tuples between two relations.
- Syntax:

Relation1 ∩ Relation2

- Description: The intersection operation returns the set of tuples that appear in both relations.
The two relations must be union-compatible.

- Example:
If we have two relations, A and B, the intersection of these relations is:

A∩B

- Result: This returns the tuples that are common to both relations A and B.

3.Codd's Rules of Relational Model

Dr. E.F. Codd introduced the Relational Model for databases in 1970 and proposed a set of
rules (also known as Codd's Twelve Rules).
That define what constitutes a true relational database system. These rules aim to ensure that
the database management system (DBMS) adheres to the principles of the relational model,
promoting data integrity, consistency, and ease of use.

Here’s a detailed look at each of Codd’s rules:

1. Information Rule
- Description: All information in a relational database should be represented in tables
(relations), and each piece of data should be stored as a value within a table.

- Implication: This means that data must be presented as tuples (rows) and attributes
(columns). Each column must hold atomic (indivisible) values.

- Example: Data like customer names, ages, and orders should be stored in tables where each
row represents a single entity (e.g., a customer) and each column contains one attribute (e.g.,
name, age).

2. Guaranteed Access Rule

- Description: Every individual data item (atomic value) in the database must be accessible by
a combination of the table name, the primary key, and the attribute name.

- Implication: This ensures that you can uniquely identify and retrieve any data in the
database using a structured query.

- Example: To retrieve a customer's name, you would use the `CustomerID` (primary key)
and column name `CustomerName` to find the specific value in the Customers table.
 3. Systematic Treatment of Null Values
- Description: The DBMS must support null values to represent missing or unknown data in a
systematic way, without confusing them with other values .

- Implication:.There should be a clear distinction between unknown, not applicable, and

missing data.

- Example: A `null` value in a Customers table's `PhoneNumber` column would indicate that
a phone number has not been provided.

4. Active on Update Rule

- Description: A relational database should allow easy update, delete, or insert operations
without affecting data integrity or the structure of the database.

- Implication: Changes to the data should be performed easily while preserving relationships
between data in different tables, ensuring no inconsistency is introduced.

- Example: When a customer's address changes, the system should allow an update to the
address without disrupting other parts of the database .

5. Comprehensive Data Sub language Rule

- Description: The system must provide a comprehensive data language (such as SQL) for
both data definition and data manipulation, including the ability to perform queries, insert,
update, and delete records.

- Implication: The data language must support a full range of relational operations to manage
and manipulate data. It should allow users to express their requirements.

- Example: SQL (Structured Query Language) allows for commands like `SELECT`,
`INSERT`, `UPDATE`, `DELETE`, and `ALTER` for data manipulation .

6. View Updating Rule

- Description: The DBMS must support all views that are theoretically updatable are also
updatable by the system

- Implication: Data should be able to be changed through any view available to the
user.

- Example: A view that displays customer names and order details should allow an update to
the `Orders` table when a change is made to the view, like updating the order amount.
7. High-Level Insert, Update, and Delete

- Description: The DBMS must support a high-level way of adding, modifying, or removing
data, and so in a way that users can perform these operations on sets of data, not just
individual rows.

- Implication: You should be able to perform operations on a set of data in a single command,
improving efficiency.

- Example: SQL allows inserting multiple rows into a table with a single `INSERT`
statement, updating multiple rows with a single `UPDATE` statement, and deleting multiple
rows with a single `DELETE` statement.

8. Physical Data Independence

- Description: The logical structure of the database should be independent of the physical
storage details. Changes in the physical storage (e.g., moving data from one disk to another)
should not affect the database.

- Implication: This ensures flexibility and scalability by allowing changes to the database's
physical storage without disrupting its logical structure.

- Example: A database should be able to switch from one storage format or hardware system
to another without requiring changes to the tables or queries.

9. Logical Data Independence

- Description: The logical structure of the data should be independent of applications and
users. Changes in the logical schema (such as adding new columns or tables) should not
require changes to the application code.

- Implication: This ensures that applications remain stable even when the database schema
evolves over time.

- Example: Adding a new column to a table (e.g., `PhoneNumber`) should not affect existing
queries that do not reference that column.

10. Integrity Independence

- Description: The DBMS should support integrity constraints that are stored in the system
catalog, ensuring that data integrity rules are enforced automatically by the system.

- Implication: The system should ensure the consistency of data through integrity constraints
without needing user intervention.
- Example: A foreign key constraint ensures that a `CustomerID` in an Orders table must exist
in the Customers table.

11. Distribution Independence

- Description: The relational DBMS should be capable of handling distributed databases
without the user or application needing to be aware of how the data is distributed across
multiple locations.

- Implication: This rule ensures that users can access the data seamlessly, regardless of
whether it is stored in one or many locations.

- Example: A distributed database system should allow queries to pull data from multiple
servers transparently.

12. Non-subversion Rule

- Description: If the relational DBMS provides a lower-level or non-relational language it
should not be able to bypass the relational integrity rules and the relational data model.

- Implication: Lower-level access should not compromise the relational model or data
integrity.

- Example: Even if the DBMS allows direct access to records through programming
languages, it should still enforce relational integrity rules like foreign key constraints.

4.Query By Example (QBE) – Simplified Explanation

Query By Example (QBE) is a simple and visual way to interact with relational databases.
It allows users to create queries by providing examples of the data they want, rather than
writing complex commands like in SQL.
QBE is designed to be easy for non-technical users to use.

How QBE Works

1. Select the Table: In QBE, the user starts by selecting the table they want to query.

2. Fill in Example Data: The user enters examples of the data they want to retrieve. Instead of
writing detailed commands, users just provide examples in a table format (grid).

3. Query Execution: Once the user fills out the table with examples, the system automatically
turns this into a database query and fetches the results.
Key Features of QBE

- Easy to Use: Users can create queries by filling in examples, without needing to know SQL
or any other complex query language.
- Visual Interface: QBE uses a table/grid format, making it easy to see and work with the
data.
- No Need for Syntax: Users don’t need to worry about query syntax, making it less error.

Example of QBE

Imagine you have an Employees table like this:

| EmployeeID | FirstName | LastName | Department | Salary |

| 101 | John | Doe | HR | 50000 |
| 102 | Jane | Smith | IT | 60000 |
| 103 | Jim | Brown | HR | 55000 |
| 104 | Jill | White | IT | 65000 |

If you want to find employees in the HR department with a salary greater than 50,000, you
would:

1. Select the Employees table.

2. Fill in the example values in the grid:
- Department: `HR`
- Salary: `>50000`

The grid would look like this:

This example is telling the system, "Show me employees from the HR department whose
salary is greater than 50,000."

The system would automatically convert this example into a SQL query like:

```sql
SELECT EmployeeID, FirstName, LastName, Department, Salary
FROM Employees
WHERE Department = 'HR' AND Salary > 50000;
```

Advantages of QBE

1. User-Friendly: QBE is very easy for people who don't know SQL to use. It provides a
simple interface where you just fill in examples.
2. Reduces Errors: Since users don’t write SQL queries manually, there’s less chance of
mistakes.
3. Quick Query Creation: Users can create queries quickly by just entering values in a grid.

Disadvantages of QBE

2. Limited Support: Not all database systems support QBE, and it may not be available in
large or complex applications.
3. Learning Curve for Complex Queries: For more complex queries (involving joins or
conditions), users may still need to understand how to structure their examples correctly.

UNIT -3

Transaction States in DBMS?

In a Database Management System (DBMS), a transaction refers to a unit of work that is

performed on the database, which can include a series of operations like inserting, updating,
deleting, or retrieving data.
Transactions are crucial to maintaining the ACID properties (Atomicity, Consistency,
Isolation, and Durability) that ensure data integrity and reliability.

A transaction in DBMS passes through several states during its execution:

Transaction States in dbms

1. New State:
- When a transaction is first initiated, it is in the New state.
- This is the initial state where the transaction has not yet started execution.

2. Active State:
- Once a transaction starts executing, it moves to the Active state.
- In this state, the transaction is performing its operations on the database (like reading or
writing data).
- It continues to execute until either all operations are complete.

3. Partially Committed State:

- If a transaction has executed all its operations but has not yet been fully committed, it
enters the Partially Committed state.
- This is the state where the transaction has completed all its operations but needs to be
finalized by committing.

4. Committed State:
- Once a transaction has been successfully executed and committed, it enters the Committed
state.
- The transaction is completed and the changes are recorded in the database permanently.
5. Failed State:
- If a transaction encounters an error (such as a system crash or violation of a constraint), it
enters the Failed state.
- A failed transaction cannot proceed, and it needs to be rolled back (undone).

6. Terminated State:
- After a transaction either commits or rolls back, it enters the Terminated state.
- In this state, the transaction has either successfully completed and committed its changes.
- This is the final state for a transaction.

Diagram of Transaction States

Here’s a diagram illustrating the flow of a transaction through different states:

Explanation of the States in the Diagram

1. New: The transaction has been created but hasn’t started yet.

2. Active: The transaction is performing operations on the database (reading, writing, etc.).

3. Partially Committed: The transaction has executed all operations but hasn’t been finalized.

4. Committed: The transaction is successfully completed and all changes are permanent.

5. Failed: The transaction encounters an error (like system failure or violation of constraints),
and needs to be aborted.

6. Terminated: The transaction has ended, either because it has been committed or rolled
back.
2. Discuss about Database Security.

Database Security

Database security involves measures to protect a database from unauthorized access,

breaches, and data loss. It ensures the confidentiality, integrity, and availability of data stored
in databases.

Objectives of Database Security

1. Confidentiality: Ensuring data is accessible only to authorized users.

2. Integrity: Protecting data from unauthorized changes.
3. Availability: Ensuring authorized users can access data when needed.

Types of Database Security

1. Physical Security: Protects database hardware from threats like theft or fire.
2. Backup and Recovery: Regular backups ensure data can be restored after corruption
or loss.
3. Audit and Monitoring: Tracks and logs database activities to detect unauthorized
access.
4. ‘Database Firewalls: Protects against attacks like SQL injection.
5. Role-Based Access Control (RBAC): Assigns specific access permissions based on
user roles.

Common Security Threats

1. Unauthorized Access: Gaining access without permission.

2. SQL Injection: Malicious code inserted into database queries.
4. Data Corruption: Unauthorized or accidental modification of data.
5. Insider Threats: Security risks from employees or contractors.

Challenges in Database Security

- Complexity: Managing security for large or complex databases can be difficult.

- Balancing Access and Security: Ensuring secure but accessible data.
- Evolving Threats: New vulnerabilities require continuous updates.

3. Normalization in DBMS

Normalization is the process of organizing the data in a database to reduce redundancy and
improve data integrity. The goal is to ensure that the database is structured efficiently, so that
it is easy to maintain, update, and query.
Normalization involves dividing large tables into smaller ones and defining relationships
between them, which helps in minimizing duplicate data. It is done by applying a set of rules
known as normal forms.

Normal Forms in Normalization

1. First Normal Form (1NF):
- A table is in 1NF if it has only atomic (indivisible) values, meaning each column contains
only one value.
- There should be no repeating groups or arrays in a column.

Example:
A table storing student information might have a column for courses, but if multiple courses
are listed in a single column, this violates 1NF.

Before 1NF:
| StudentID | Name | Courses |
|1 | John | Math, English |
|2 | Jane | History, Art |

After 1NF (Atomic values):

| StudentID | Name | Course |
|1 | John | Math |
|1 | John | English |
|2 | Jane | History |
|2 | Jane | Art |

2. Second Normal Form (2NF):

- A table is in 2NF if it is in 1NF and all non-key attributes are fully dependent on the
primary key.
- This removes partial dependencies, where an attribute depends on only part of a
composite primary key.

Example:
A table that stores order details where both the order number and product ID are the
primary key.

Before 2NF:
| OrderID | ProductID | ProductName | Quantity |
| 101 | A | Apple | 10 |
| 101 | B | Banana |5 |

After 2NF (Removing partial dependencies):

- Split into two tables: `Orders` and `Products`.

Orders:
| OrderID | Quantity |
| 101 | 10 |
| 101 | 5 |

Products:
 | ProductID | ProductName |
|A | Apple |
|B | Banana |

3. Third Normal Form (3NF):

- A table is in 3NF if it is in 2NF and there are no transitive dependencies (non-key
attributes should not depend on other non-key attributes).

Example:
In a table that stores employee information, if the department manager is dependent on the
department, it creates a transitive dependency.

Before 3NF:
| EmployeeID | Name | Department | Manager |
| 101 | John | HR | Alice |
| 102 | Jane | IT | Bob |

After 3NF (Removing transitive dependency):

- Split into two tables: `Employees` and `Departments`.

Employees:
| EmployeeID | Name | Department |
| 101 | John | HR |
| 102 | Jane | IT |

Departments:
| Department | Manager |
| HR | Alice |
| IT | Bob |

Benefits of Normalization

1. Reduces Data Redundancy: Eliminates duplicate data across tables, reducing storage
requirements.
2. Improves Data Integrity: Ensures that data is stored logically, reducing errors and
inconsistencies.
3. Enhances Query Performance: Reduces unnecessary data storage and improves database
efficiency.
4.What is Functional Dependency? Explain with example.

Functional Dependency in DBMS

A functional dependency (FD) is a relationship between two sets of attributes in a database

table. It defines how one attribute (or set of attributes) determines another attribute (or set of
attributes).

In other words, a functional dependency occurs when a value of one attribute uniquely
determines the value of another attribute.

Definition

If for a given set of attributes \( X \) and \( Y \), \( X \) uniquely determines \( Y \), we write it
as:

This means that if two rows of the table have the same value for \( X \), they must also have
the same value for \( Y \).

- \( X \) is called the determinant.

- \( Y \) is called the dependent attribute.

Example of Functional Dependency

Consider the following Student table:

| StudentID | StudentName | Course | Instructor |

| 101 | John | Math | Mr. A |
| 102 | Jane | English | Mr. B |
| 103 | John | Science | Mr. A |
| 104 | Alice | Math | Mr. C |

In this table, we have several attributes: StudentID, StudentName, Course, and Instructor.

Example 1:

- StudentID → StudentName:
- This means that the StudentID uniquely determines the StudentName.
- If you know a StudentID, you can uniquely identify the StudentName.
- In the table, for StudentID 101, the corresponding StudentName is John. For StudentID
103, it is John as well. Hence, the StudentID determines the StudentName.

Example 2:

- Course → Instructor:
- This means that a specific Course uniquely determines the Instructor.
- For example, Math is taught by Mr. A, English is taught by Mr. B, and Science is taught by
Mr. A.
- So, if you know the Course, you can determine the Instructor.
Key Points

1. One-to-One Relationship: When one attribute (or set of attributes) uniquely determines
another.
2. Transitive Dependency: If X → Y and Y → Z, then X → Z. This is an example of a
transitive dependency, where an indirect dependency exists.
3. Partial Dependency: In composite keys, if a non-key attribute is dependent on only a part
of the primary key, it is a partial dependency.

UNIT -4
1.Discuss in detail about Aggregate Functions in SQL.
Aggregate Functions in SQL

Aggregate functions in SQL are used to perform calculations on a set of values and return a
single value as the result.
The aggregate functions allow you to perform operations such as counting, summing,
averaging, and finding the minimum or maximum value in a group of rows.

Common Aggregate Functions in SQL

1. COUNT()
- Purpose: Counts the number of rows or non-NULL values in a column.
- Syntax:
```sql
SELECT COUNT(column_name) FROM table_name;
```
- Example:
```sql
SELECT COUNT(*) FROM Employees;
```
This counts the total number of rows in the `Employees` table.

2. SUM()
- Purpose: Calculates the total sum of a column.
- Syntax:
```sql
SELECT SUM(column_name) FROM table_name;
```
- Example:
```sql
SELECT SUM(salary) FROM Employees;
```
This returns the total sum of all salaries in the `Employees` table.

3. AVG()
- Purpose: Calculates the average value of a column.
- Syntax:
```sql
SELECT AVG(column_name) FROM table_name;
 ```
- Example:
```sql
SELECT AVG(salary) FROM Employees;
```
This returns the average salary of all employees.

4. MIN()
- Purpose: Finds the minimum value in a column.
- Syntax:
```sql
SELECT MIN(column_name) FROM table_name;
```
- Example:
```sql
SELECT MIN(salary) FROM Employees;
```
This returns the lowest salary from the `Employees` table.

5. MAX()
- Purpose: Finds the maximum value in a column.
- Syntax:
```sql
SELECT MAX(column_name) FROM table_name;
```
- Example:
```sql
SELECT MAX(salary) FROM Employees;
```
This returns the highest salary from the `Employees` table.

Using Aggregate Functions with GROUP BY

When you want to apply aggregate functions to groups of rows based on a specific column,
you use the GROUP BY clause.
Example:

```sql
SELECT department, AVG(salary)
FROM Employees
GROUP BY department;
```
- This query will return the average salary for each department in the `Employees` table.

Example with Multiple Aggregate Functions:

```sql
SELECT department, COUNT(*) AS total_employees, AVG(salary) AS avg_salary
FROM Employees
GROUP BY department;
```
- This query will return the total number of employees and the average salary for each
department.

Using Aggregate Functions with HAVING

The HAVING clause is used to filter the results after applying an aggregate function, much
like WHERE is used to filter rows before aggregation.

Example:

```sql
SELECT department, COUNT(*) AS total_employees
FROM Employees
GROUP BY department
HAVING COUNT(*) > 10;
```
- This query will return the departments where the number of employees is greater than 10.

NULL Values in Aggregate Functions

- COUNT() ignores NULL values, i.e., it only counts non-NULL values in the specified
column.
- SUM(), AVG(), MIN(), and MAX() treat NULL as unknown, and they will ignore NULL
values in the calculations.

2.What are the DML Commands available in SQL?

DML (Data Manipulation Language) Commands in SQL

DML (Data Manipulation Language) is a subset of SQL used to manage and manipulate the
data stored within a database. DML commands allow you to perform operations like
inserting, updating, deleting, and retrieving data from tables.
Common DML Commands

1. INSERT
- Purpose: Adds new rows of data to a table.
- Syntax:
```sql
INSERT INTO table_name (column1, column2, column3, ...)
 VALUES (value1, value2, value3, ...);
```
- Example:
```sql
INSERT INTO Employees (EmployeeID, Name, Department, Salary)
VALUES (101, 'John Doe', 'HR', 50000);
```

- Explanation: The INSERT command adds a new row to the `Employees` table with the
specified values for each column.

2. UPDATE
- Purpose: Modifies existing data in a table.
- Syntax:
```sql
UPDATE table_name
SET column1 = value1, column2 = value2, ...
WHERE condition;
```
- Example:
```sql
UPDATE Employees
SET Salary = 55000
WHERE EmployeeID = 101;
```

- Explanation: The UPDATE command changes the salary of the employee with
EmployeeID = 101 to 55000.

3. DELETE
- Purpose: Removes rows from a table based on a condition.
- Syntax:
```sql
DELETE FROM table_name
WHERE condition;
```
- Example:
```sql
DELETE FROM Employees
WHERE EmployeeID = 101;
```

- Explanation: The DELETE command removes the row from the `Employees` table where
the EmployeeID is 101.

4. SELECT
- Purpose: Retrieves data from one or more tables.
- Syntax:
```sql
SELECT column1, column2, ...
 FROM table_name
WHERE condition;
```
- Example:
```sql
SELECT Name, Salary
FROM Employees
WHERE Department = 'HR';
```

- Explanation: The SELECT command retrieves the Name and Salary of all employees in
the HR department.

Key Points

- INSERT: Adds new data.

- UPDATE: Modifies existing data.
- DELETE: Removes data.
- SELECT: Retrieves data (though not strictly DML, it is often considered a part of DML
operations).

3.Explain in detail about DDL and DML commands in SQL.

DDL (Data Definition Language) Commands in SQL

DDL commands are used to define and manage the structure of the database, including the
creation, alteration, and deletion of tables, schemas, and other database objects. DDL
commands do not manipulate the data itself but rather deal with the structure of the database.

Common DDL Commands

1. CREATE
- Purpose: Creates a new database object like a table, view, index, or schema.
- Syntax:
```sql
CREATE TABLE table_name (
column1 datatype,
column2 datatype,
...
);
```
- Example:
```sql
CREATE TABLE Employees (
EmployeeID INT PRIMARY KEY,
Name VARCHAR(100),
Department VARCHAR(50),
Salary DECIMAL(10, 2)
);
 ```
- Explanation: This creates a table called `Employees` with columns for EmployeeID,
Name, Department, and Salary.

2. ALTER
- Purpose: Modifies an existing database object, such as adding, deleting, or modifying
columns in a table.
- Syntax:
```sql
ALTER TABLE table_name
ADD column_name datatype;

ALTER TABLE table_name

MODIFY COLUMN column_name datatype;

ALTER TABLE table_name

DROP COLUMN column_name;
```
- Example:
```sql
ALTER TABLE Employees
ADD DateOfBirth DATE;
```
- Explanation: This adds a new column `DateOfBirth` to the `Employees` table.

3. DROP
- Purpose: Deletes a database object (e.g., a table, index, or view) from the database.
- Syntax:
```sql
DROP TABLE table_name;
```
- Example:
```sql
DROP TABLE Employees;
```
- Explanation: This deletes the `Employees` table from the database along with all its data.

4. TRUNCATE
- Purpose: Removes all rows from a table, but retains the table structure. This is faster than
DELETE because it does not log individual row deletions.
- Syntax:
```sql
TRUNCATE TABLE table_name;
```
- Example:
```sql
TRUNCATE TABLE Employees;
```
- Explanation: This command removes all records from the `Employees` table but keeps the
table and its structure intact.
5. RENAME
- Purpose: Renames an existing database object.
- Syntax:
```sql
RENAME TABLE old_table_name TO new_table_name;
```
- Example:
```sql
RENAME TABLE Employees TO Staff;
```
- Explanation: This renames the `Employees` table to `Staff`.

DML (Data Manipulation Language) Commands in SQL

DML commands are used to manipulate and manage the data stored within the tables of a
database. These commands allow you to add, update, delete, and retrieve data from the
database.

Common DML Commands

1. INSERT
- Purpose: Adds new rows of data into a table.
- Syntax:
```sql
INSERT INTO table_name (column1, column2, ...)
VALUES (value1, value2, ...);
```
- Example:
```sql
INSERT INTO Employees (EmployeeID, Name, Department, Salary)
VALUES (101, 'John Doe', 'HR', 50000);
```
- Explanation: This adds a new row into the `Employees` table with the specified values for
each column.

2. UPDATE
- Purpose: Modifies the data in an existing record.
- Syntax:
```sql
UPDATE table_name
SET column1 = value1, column2 = value2, ...
WHERE condition;
```
- Example:
```sql
UPDATE Employees
SET Salary = 55000
 WHERE EmployeeID = 101;
```
- Explanation: This updates the salary of the employee with `EmployeeID = 101` to 55000.

3. DELETE
- Purpose: Removes one or more rows from a table based on a condition.
- Syntax:
```sql
DELETE FROM table_name
WHERE condition;
```
- Example:
```sql
DELETE FROM Employees
WHERE EmployeeID = 101;
```
- Explanation: This deletes the row with `EmployeeID = 101` from the `Employees` table.

4. SELECT
- Purpose: Retrieves data from one or more tables. While SELECT is not technically a
DML command in some systems, it is often included as part of DML operations because it
manipulates data retrieval.
- Syntax:
```sql
SELECT column1, column2, ...
FROM table_name
WHERE condition;
```
- Example:
```sql
SELECT Name, Salary
FROM Employees
WHERE Department = 'HR';
```
- Explanation: This retrieves the Name and Salary of all employees in the HR department.

Key Differences Between DDL and DML

DML (Data Manipulation
Feature DDL (Data Definition Language)
Language)
Defines and manages database
Purpose Manages data within the database
structure
CREATE, ALTER, DROP, INSERT, UPDATE, DELETE,
Commands
TRUNCATE, RENAME SELECT
Operation on Affects the structure of the database
Affects the data within the tables
Structure (e.g., tables, schemas)
Changes are permanent and not part of Changes can be rolled back (part
Transaction
a transaction of transactions)
 DML (Data Manipulation
Feature DDL (Data Definition Language)
Language)
Creating tables, modifying schemas, Inserting data, updating records,
Examples
dropping tables deleting records

4.Discuss about Set operations in SQL.

Set Operations in SQL

Set operations in SQL allow you to combine the results of two or more SELECT queries.
These operations are helpful when you want to retrieve data from multiple tables or queries in
a single result. SQL provides several set operations, including UNION, UNION ALL,
INTERSECT, and EXCEPT (or MINUS in some systems).

To use set operations, queries must follow these rules:

- All queries involved must have the same number of columns.
- Columns must have compatible data types.
- Columns in corresponding positions must have similar data formats (e.g., all numeric or all
strings).

Types of Set Operations in SQL

1. UNION

- Purpose: Combines the results of two or more queries, removing duplicate rows by default.
- Syntax:
```sql
SELECT column1, column2, ...
FROM table1
UNION
SELECT column1, column2, ...
FROM table2;
```
- Example:
```sql
SELECT Name FROM Employees
UNION
SELECT Name FROM Contractors;
```
- Explanation: This returns a list of unique names from both the `Employees` and
`Contractors` tables, removing any duplicates.

2. UNION ALL

- Purpose: Similar to UNION, but includes all duplicate rows in the result.
- Syntax:
```sql
SELECT column1, column2, ...
 FROM table1
UNION ALL
SELECT column1, column2, ...
FROM table2;
```
- Example:
```sql
SELECT Name FROM Employees
UNION ALL
SELECT Name FROM Contractors;
```
- Explanation: This returns all names from both `Employees` and `Contractors`, including
duplicates. It is faster than UNION because it doesn’t perform duplicate removal.

3. INTERSECT

- Purpose: Returns only the rows that are common to both queries.
- Syntax:
```sql
SELECT column1, column2, ...
FROM table1
INTERSECT
SELECT column1, column2, ...
FROM table2;
```
- Example:
```sql
SELECT Name FROM Employees
INTERSECT
SELECT Name FROM Contractors;
```
- Explanation: This returns only the names that appear in both `Employees` and
`Contractors`.

4. EXCEPT (or MINUS)

- Purpose: Returns the rows from the first query that are not present in the second query.
- Syntax:
```sql
SELECT column1, column2, ...
FROM table1
EXCEPT
SELECT column1, column2, ...
FROM table2;
```
*(In some systems, `EXCEPT` may be replaced by `MINUS`.)*
- Example:
```sql
SELECT Name FROM Employees
EXCEPT
 SELECT Name FROM Contractors;
```
- Explanation: This returns names that are in `Employees` but not in `Contractors`.
Examples of Set Operations
Assume we have two tables, Students_A and Students_B:
Students_A
StudentID Name
1 Alice
2 Bob
3 Charlie
Students_B
StudentID Name
1 Charlie
2 David
3Eva

1. UNION:
sql
Copy code
SELECT Name FROM Students_A
UNION
SELECT Name FROM Students_B;
Result:
Name
Alice
Bob
Charlie
David
Eva
2. UNION ALL:
sql
Copy code
SELECT Name FROM Students_A
UNION ALL
SELECT Name FROM Students_B;
Result:
Name
Alice
Bob
Charlie
Charlie
David
Eva
 Name

3. INTERSECT:
sql
Copy code
SELECT Name FROM Students_A
INTERSECT
SELECT Name FROM Students_B;
Result:
Name
Charlie

4. EXCEPT:
sql
Copy code
SELECT Name FROM Students_A
EXCEPT
SELECT Name FROM Students_B;
Result:
Name
Alice
Bob

Key Points

- UNION removes duplicates, while UNION ALL retains all duplicates.

- INTERSECT returns only the common rows in both queries.
- EXCEPT (or MINUS) returns rows from the first query that aren’t in the second.

UNIT-5

1.What is a cursor? Explain the steps to create a cursor.

Cursor
• A cursor is a temporary area created in the main memory
when a SQL statement is executed. A cursor contains
information on a select statement and the rows of data
accessed by it.
• This temporary work area is used to store the data
retrieved from the database, and manipulate this data.
• A cursor can hold more than one row, but can process
only one row at a time. The set of rows the cursor holds
is called the active set.
• There are two types of cursors in PL/SQL:
– Implicit
 – Explicit
Here are the steps to create and use an explicit cursor in SQL, summarized:

1. Declare the Cursor:

- Define the cursor and specify the `SELECT` query.
- Example: `DECLARE cursor_name CURSOR FOR SELECT column1 FROM table;`

2. Open the Cursor:

- Execute the `SELECT` query and store the result in the cursor.
- Example: `OPEN cursor_name;`

3. Fetch Data:
- Retrieve each row in sequence.
- Example: `FETCH NEXT FROM cursor_name INTO variable1;`

4. Process Data:
- Apply any required operations on the fetched data.

5. Close the Cursor:

- Close the cursor to free the result set.
- Example: `CLOSE cursor_name;`

6. Deallocate the Cursor:

- Release the cursor’s resources.
- Example: `DEALLOCATE cursor_name;

2. Explain the Structure of PL/SQL.

PL/SQL (Procedural Language/SQL) is Oracle’s procedural extension to SQL, allowing users

to create complex programs with SQL commands, procedural logic, loops, and error
handling. A typical PL/SQL block is divided into three main sections:
Declare, Begin, and Exception followed by an End statement. We will see the di fferent
sections of PL/SQL block.

Declare Section
Declare section declares the variables, constants, processes, functions, etc., to
be used in the other parts of program. It is an optional section.

Begin Section
It is the executable section. It consists of a set of SQL and PL/SQL statements,
which is executed when PL/SQL block runs. It is a compulsory section.

Exception Section
This section handles the errors, which occurs during execution of the PL/SQL
block. This section allows the user to define his/her own error messages. This
section executes only when an error occurs. It is an optional section.
End Section
This section indicates the end of PL/SQL block.
Every PL/SQL program must consist of at least one block, which may
consist of any number of nested sub-blocks. Figure 5.1 shows a typical PL/SQL
block.

3. Briefly explain about Exception Handling in PL/SQL.

Exception Handling in PL/SQL

Exception handling in PL/SQL is a mechanism that allows you to manage and respond to
runtime errors or exceptions that occur during program execution. By using the EXCEPTION
section in a PL/SQL block, you can define specific actions to handle errors gracefully,
preventing abrupt termination of the program.

Structure of Exception Handling

In a PL/SQL block, the EXCEPTION section follows the BEGIN ... END block and allows
you to handle errors through predefined or custom exception handlers:

```plsql
BEGIN
-- Main code block where SQL and PL/SQL statements are executed.
EXCEPTION
WHEN exception_name THEN
-- Code to handle the exception.
END;
```

Types of Exceptions in PL/SQL

1. Predefined Exceptions:
- PL/SQL provides built-in exceptions for common errors.
- Examples:
- NO_DATA_FOUND: Raised when a `SELECT INTO` statement returns no rows.
- TOO_MANY_ROWS: Raised when a `SELECT INTO` statement returns more than one
row.
- ZERO_DIVIDE: Raised when dividing by zero.

2. User-Defined Exceptions:
- Custom exceptions defined by the user for specific error-handling needs.
- Declared in the DECLARE section and raised explicitly using the `RAISE` statement.

Example of Exception Handling

The following example demonstrates handling a NO_DATA_FOUND exception:

```plsql
DECLARE
emp_name VARCHAR2(50);
BEGIN
-- Attempt to fetch an employee’s name with a given ID.
SELECT name INTO emp_name FROM Employees WHERE EmployeeID = 999;
DBMS_OUTPUT.PUT_LINE('Employee Name: ' || emp_name);
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE('No employee found with the given ID.');
END;
```

- Explanation:
- NO_DATA_FOUND exception is raised if no row matches `EmployeeID = 999`.
- The exception handler prints an error message instead of terminating the program abruptly.

Key Points

- Exception handling improves program robustness by handling errors effectively.

- Predefined exceptions are useful for common SQL errors, while user-defined exceptions
allow custom error handling.
- Exception handling ensures that PL/SQL programs can handle errors gracefully without
crashing.

4.Write a trigger program to display the appropriate message for inserting and deleting
records in a database table

Here is an example of a PL/SQL trigger program that displays appropriate messages when
inserting or deleting records from a database table called `Employees`.
Example: Trigger for Inserting and Deleting Records

Suppose we have the following table:

Employees

| EmployeeID | Name | Department | Salary |

||||--|

We’ll create a trigger that displays a message when a record is inserted or deleted.

Trigger Program

```plsql
CREATE OR REPLACE TRIGGER trg_employee_audit
AFTER INSERT OR DELETE ON Employees
FOR EACH ROW
BEGIN
-- Message for Insert operation
IF INSERTING THEN
DBMS_OUTPUT.PUT_LINE('New record inserted:');
DBMS_OUTPUT.PUT_LINE('Employee ID: ' || :NEW.EmployeeID);
DBMS_OUTPUT.PUT_LINE('Name: ' || :NEW.Name);
DBMS_OUTPUT.PUT_LINE('Department: ' || :NEW.Department);
DBMS_OUTPUT.PUT_LINE('Salary: ' || :NEW.Salary);
END IF;

-- Message for Delete operation

IF DELETING THEN
DBMS_OUTPUT.PUT_LINE('Record deleted:');
DBMS_OUTPUT.PUT_LINE('Employee ID: ' || :OLD.EmployeeID);
DBMS_OUTPUT.PUT_LINE('Name: ' || :OLD.Name);
DBMS_OUTPUT.PUT_LINE('Department: ' || :OLD.Department);
DBMS_OUTPUT.PUT_LINE('Salary: ' || :OLD.Salary);
END IF;
END;
```

Explanation

- Trigger Name: `trg_employee_audit`

- Trigger Timing: `AFTER INSERT OR DELETE` – The trigger fires after an insert or delete
operation on the `Employees` table.
- Conditions:
- IF INSERTING: Checks if an insert operation is being performed. Displays the details of
the new record using `:NEW` pseudorecord, which holds the new values.
 - IF DELETING: Checks if a delete operation is being performed. Displays the details of the
deleted record using `:OLD` pseudorecord, which holds the values before deletion.

Usage

- To see the output messages, you need to enable `DBMS_OUTPUT` in your SQL
environment (such as SQL*Plus or SQL Developer).
- Example:
```sql
SET SERVEROUTPUT ON;
```

This trigger helps in auditing the `Employees` table by displaying messages whenever
records are inserted or deleted.

5.Discuss in detail about Procedure and Function in PL/SQL.

Procedures and Functions in PL/SQL

In PL/SQL, procedures and functions are subprograms that encapsulate a series of SQL and
PL/SQL statements. Both allow reusability, modularity, and better structure within PL/SQL
programs by enabling code reuse and logic organization. They are primarily used to perform
specific tasks within a database.

Differences Between Procedures and Functions

Feature Procedure Function
Purpose Performs an action or task. Returns a single value.
Return Value Does not return a value directly. Must return a single value.
Called as a standalone statement or in Can be used in SQL expressions and
Usage
a PL/SQL block. assignments.
Calling Cannot be directly called in SQL Can be directly called in SQL
Context statements. statements.
Parameter
Supports IN, OUT, IN OUT. Generally uses only IN mode.
Modes

1. Procedure

A procedure is a PL/SQL block that performs a specific action or set of actions. It can accept
parameters and allows the use of `IN`, `OUT`, and `IN OUT` parameter modes.

Structure of a Procedure

```plsql
CREATE OR REPLACE PROCEDURE procedure_name (parameter1 IN datatype,
parameter2 OUT datatype) IS
 -- Declaration section
BEGIN
-- Execution section with PL/SQL code
EXCEPTION
-- Exception handling section
END;
```

Example of a Procedure

This procedure increases an employee's salary based on a given percentage:

```plsql
CREATE OR REPLACE PROCEDURE increase_salary (
emp_id IN NUMBER,
percent IN NUMBER,
new_salary OUT NUMBER
) IS
BEGIN
-- Update the salary
UPDATE Employees
SET Salary = Salary + (Salary * percent / 100)
WHERE EmployeeID = emp_id
RETURNING Salary INTO new_salary;
END;
```

- Explanation:
- The procedure takes `emp_id` (employee ID) and `percent` (percentage increase) as inputs.
- It uses the `OUT` parameter `new_salary` to return the updated salary.
- The salary is updated by the given percentage, and the new salary is stored in
`new_salary`.

2. Function

A function is similar to a procedure but is designed to return a single value. Functions are
often used when a value or calculation needs to be returned, and they can be called directly
within SQL statements.

Structure of a Function

```plsql
CREATE OR REPLACE FUNCTION function_name (parameter IN datatype) RETURN
datatype IS
-- Declaration section
BEGIN
-- Execution section with PL/SQL code
RETURN value; -- Must return a value
EXCEPTION
-- Exception handling section
END;
```

Example of a Function

This function calculates and returns the bonus for an employee based on their salary:

```plsql
CREATE OR REPLACE FUNCTION calculate_bonus (
emp_id IN NUMBER
) RETURN NUMBER IS
emp_salary NUMBER;
bonus NUMBER;
BEGIN
-- Get the salary of the employee
SELECT Salary INTO emp_salary FROM Employees WHERE EmployeeID = emp_id;

-- Calculate the bonus as 10% of the salary

bonus := emp_salary * 0.10;

RETURN bonus;
END;
```

- Explanation:
- The function `calculate_bonus` takes `emp_id` as input and returns the bonus amount.
- It calculates the bonus as 10% of the employee’s salary and returns this value.

Key Points

1. Procedures are ideal when multiple actions or statements need to be performed, and no
return value is required.
2. Functions are suited for calculations or operations that return a single value and can be
used in SQL expressions.
3. Both can improve modularity, reusability, and readability in PL/SQL code.
4. Exception handling can be included in both to manage errors.