TECHNICAL SPECIFICATIONS

• PTCA Balloon Catheter Rapid Exchange System (Rx)

•
•
Semi-Compliant Balloon
Balloon material: Polyamide
THE NEW STAR IS
•
•
Balloon transition angles: Tapered shoulders at 42º
Balloon inflation pressures: Nominal 6 ATM/Bars.
Rated Burst Pressure (RBP): 18 ATM/Bars (16 ATM/Bars > 4.0 mm)
CLEVER
PTCA BALLOON CATHETER
• Catheter tip entry profile 0.016”
• Catheter lenght: 140 cms
• Catheter shaft diameters: 1.9 FR (proximal) and 2.4 FR distal
• Compatible Guide wire 0.014”
• Minimal Guiding catheter compatible: 5 FR (0.058 mm)
• Kissing Balloon technique: 2 balloons on 6 FR guiding catheter

Nominal Diameter (mm)

0.64 mm (1.9F) 0.81 mm (2.4F)
Guide Wire

Catalogue Nr: 22-0040-1 Rev.03

Length (mm)

24.5 cm

140 cm

ORDERING INFORMATION
BALLOON BALLOON LENGHT
DIAMETER 10 mm 15 mm 20 mm 25 mm 30 mm 35 mm 40 mm
1.5 mm CV-150-10 CV-150-15 CV-150-20 - - - -
2.0 mm CV-200-10 CV-200-15 CV-200-20 CV-200-25 - - -
2.25 mm CV-225-10 CV-225-15 CV-225-20 CV-225-25 CV-225-30 CV-225-35 CV-225-40
2.50 mm CV-250-10 CV-250-15 CV-250-20 CV-250-25 CV-250-30 CV-250-35 CV-250-40
2.75 mm CV-275-10 CV-275-15 CV-275-20 CV-275-25 CV-275-30 CV-275-35 CV-275-40
3.0 mm CV-300-10 CV-300-15 CV-300-20 CV-300-25 CV-300-30 CV-300-35 CV-300-40
3.25 mm CV-325-10 CV-325-15 CV-325-20 CV-325-25 CV-325-30 CV-325-35 CV-325-40
3.5 mm CV-350-10 CV-350-15 CV-350-20 CV-350-25 CV-350-30 CV-350-35 CV-350-40
4.0 mm CV-400-10 CV-400-15 CV-400-20 CV-400-25 CV-400-30 CV-400-35 CV-400-40
4.5 mm - - CV-450-20 CV-450-25 CV-450-30 CV-450-35 CV-450-40

Distributed by:

Conic Vascular Technology S.A.

Via Carlo Maderno, 23
6901 Lugano - Switzerland

Phone (+41) 91 910 77 88

Fax (+41) 91 923 91 19
[email protected]

Swiss Technology
www.conicvascular.com 0481
CLEVER
PTCA BALLOON CATHETER

Navigability Sidebranch access (Complex lesions)

Nm

Product design and patented Nm 0,5

0,45
0,45

manufacturing technology. 0,4

0,35
0,352 0,4 0,33

0,35
0,3
0,252 0,3
Excellent navigability properties and balanced 0,25
0,2
0,198 0,25
0,21
0,23

pushability, trackability and crossability.

0,168 0,2
0,15
0,15
0,1
0,1
0,05
Ideal for crossing difficult and severe 0
CLEVER FALCON BRAVO SEQUENT MAVERIK
0,05
0
lesions (cto) and tortuous coronary anatomies. CLEVER FALCON BRAVO SEQUENT MAVERIK

Low profiles - tip entry and balloon crossing. (See charts) (Nm) Average Force needed to get the Target Lesion.
Lower Force Value = Better Navigability.
(Nm) Average Force needed to access to Sidebranches with High Angulation
and Complex Lesions. Lower Force Value = Better Tracking.
Very thin balloon wall (0.008 mm), very flexible, resistant,
fast deflation time. Balloon CROSSING PROFILES
Balloon Profile Profile
Deliver central and uniform dilatation with Diameter
1.25 mm (*)
MILIMETERS
0.56 mm
inches
0.0220”

less risk to cause edge dissection. 1.50 mm

2.00 mm
0.58 mm
0.60 mm
0.0228”
0.0236”
Balloon distal transition angle design: tapered shoulders at 42º. 2.25 mm 0.61 mm 0.0240”
2.50 mm 0.62 mm 0.0244”

Freedom of motion of guide wire at high pressure

2.75 mm 0.64 mm 0.0251”
3.00 mm 0.65 mm 0.0255”

balloon inflation. No risk of guide wire colapse. 3.25 mm

3.50 mm
0.67 mm
0.68 mm
0.0263”
0.0267”
Patented design of inner tube at distal catheter segment. 4.00 mm 0.71 mm 0.0279”
4.50 mm 0.74 mm 0.0291”

Avoiding balloon “dog bone” effect and * Q4/2015

( )

potential intima’s injuries. Balloon Compliance CHART

Controlled balloon growth even at high inflation pressures. ø 1.5 mm 2.00 mm 2.25 mm 2.50 mm 2.75 mm 3.00 mm 3.25 mm 3.50 mm 4.00 mm 4.50 mm
BAR
4 1.48 1.92 2.20 2.46 2.68 2.92 3.17 3.47 3.92 4.38
Low friction during navigation and crossability. 6 1.52 2.05 2.28 2.54 2.76 3.04 3.27 3.54 4.04 4.50
Highly efficient hidrophilic balloon and distal shaft coating. 8 1.58 2.11 2.31 2.59 2.82 3.09 3.34 3.66 4.14 4.61
10 1.64 2.14 2.37 2.66 2.88 3.15 3.40 3.71 4.22 4.69
12 1.74 2.18 2.41 2.74 2.94 3.21 3.45 3.78 4.29 4.75
14 1.78 2.22 2.45 2.82 2.99 3.25 3.49 3.88 4.36 4.80
16 1.85 2.26 2.49 2.86 3.03 3.29 3.53 3.97 4.44 4.86
18 RBP. 2.00 2.30 2.53 2.90 3.07 3.34 3.57 4.04 4.54 4.93
20 2.10 2.38 2.58 2.98 3.12 3.40 3.62 4.15 4.65 > 20
22 - - - - - - - - - -
23 - - - - - - - > 23 > 23 -
25 > 25 > 25 > 25 > 25 > 25 > 25 > 25 - - -