Scribd
Upload
8 views2 pages

Rub-a-Dub-Reverb-BOM

Uploaded by

谢灿林
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

Rub-a-Dub-Reverb-BOM

Uploaded by

谢灿林
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Rub-a-Dub Reverb

Project by 1776 Effects/JRM ©2012

Resistors Capacitors Diode

R1 1M R10 5k C1 22n D1 1N4001

R2 180k R11 33R C2 47pF IC

R3 360k R12 10k C3 1 uF IC1 TL072

R4 22k R13 10k C4 100pF Regulator

R5 12k* C5 1 uF REG 78L05

R6 1k C6 47uF Potentiometer

R7 1M C7 100uF MIX 50kB

R8 20k C8 47uF Misc

R9 5k Reverb1 BTDR-2H

©2012 JRM/1776effects www.1776effects.com


Notes:

Please note the traces are rather close in order to fit on a board that
accommodates a 1590B. Take special care when soldering!

The board mounted pot is on the trace side and the BTDR-2H will be on the
component side.

*You can adjust R5 to a higher resistance if you would like to boost the
signal above unity. I used 18k for a slight boost.

Board 50mm x 50mm

This document and board layout is designed for personal use only! No
commercial use whatsoever without written authorization from the owner.
1776 Effects/JRM ©2012

©2012 JRM/1776effects www.1776effects.com

You might also like