Brand: Sany Crawler Crane Engine n0.

78675542 6 Crawler Tracks Status Faulty / Diagnosis

Machine type: SCC600A-1 Engine Model: QSB5.9-C210-30 ( Diesel Engine) 6.1 Track Chain condition & correct tension Ok
Maximum lifting load: 60t Displacement: 5.9L 6.2 Check for loose or missing fasteners Ok
Rated Power: 154Kw /2200 rpm Rated Kw: 154 / 2200 r/min 6.3 Out trigger / Cylinder Ok
Manufactured Date: 2020/03/02 Fuel rated @ HP: 112 mm3/stroke 7 Hydraulic System
Serial n0. CC0060BK0229 Engine Brand: Cummins China 7.1 Hydraulic Pump-Oil Ok
Working Hours/km: 7630 7.2 Control Frame-Cracks Ok
1 Cabin Status Faulty / Diagnosis 7.3 Hydraulic Tank-oil Leaks, Cap, Seals Ok
1.1 Cleanliness Ok 7.4 Hoses, Tubes, Connections, Oil leaks Ok
1.2 Seat Condition Ok 7.5 Hydraulic Drive Motor -oil leaks Ok
1.3 Air Condition Ok 7.6 Main winch /Reduction Ok
1.4 Switches Ok 7.7 Aux winch /Reduction Ok
1.5 Instruments Operational & Labelled Ok 7.8 Boom winch / Reduction Ok
1.6 Levers / Controls Operational Ok 8 Engine
1.7 Pedals in Good Condition Ok 8.1 Radiator /Coolant / Fan Ok
1.8 Windows/ Wipers / Washers Ok 8.2 ECM /ECU/ Sensor Ok
1.9 Rear View & Side Mirrors/ Cameras Ok 8.3 Fuel Tank Ok
1.10 Fire Extinguishers N/A 8.4 Engine Oil Ok
1.11 Emergency Life Hammer N/A 8.5 Stater /Alternator Ok
1.12 Operator Instruction (available on Cabin) Ok 8.6 Filters Ok
1.13 Emergency STOP switch Ok 8.7 V- Belts Ok
1.14 Windshield Guarding Grill N/A 8.8 Engine harness /Batteries Ok
2 Warning Devices 9 Boom Section
2.1 Horn Ok 9.1 Hoist Drums / Note. Free fall Ok Note.Free fall are not available in the system
2.2 Motion Alarm Ok 9.2 Boom condition
2.3 Reverse and swing Alarm N/A No alarm need to install & new connection 9.3 Main wire rope & hook NOK Damage wire rope need replacement
2.4 Flashing Amber Beacon N/A Need to install & new connection 9.4 Aux wire rope & hook NOK Damage wire rope need replacement
3 Warning Signs ( in cabin) 9.5 Gantry wire rope Ok
3.1 Seat Belt must be worn N/A 9.6 Pulley /Counter weight Ok
3.2 Danger: Beware overhead wires Ok 10 LMI System
4 Lights 10.1 Angle sensor OK
4.1 Front Lights OK 10.2 Load sensor Ok
4.2 Rear Lights Ok 10.3 Computer Monitor Ok
4.3 Cabin Lights Ok 10.4 PLC module control system Ok
4.4 Hoist Drum Light OK 10.5 3 colors alarm light Ok
5 Access 10.6 Anemometer Not done yet the installation
5.1 Handrails & Steps OK 10.7 Hoist Limit Switch A2B / Wire cable Ok
Action taken / Recommend ( Please write below) Status
1 Replacement of all broken bolts from travel motor cover. Done
2 We conduct Arrangement of main wire rope for Main which is knotted. Done
• Indicate ‘OK’ if ok; ‘NOK’ if not ok; “N/A” if not applicable or not available.
3 Waiting for the spare aux wire rope. On prog's
4

Checking By: Date: May 23,2024 Verified by: Date: