1"

[25mm]

#12 X 2" SS ROUNDED HEAD SHEET

REINF. EPDM VAPOR BARRIER METAL SCREW (JKSS20) (7 PER
(JL009-RVB) NOTE: SET IN CONT. FRAME @ 18" [457mm] O.C.)
BED OF BUTYL SEALANT (BY EXT. SHEATHING ASSEMBLY
OTHERS) TERMINATE RVB AT (BY OTHERS)
OUTSIDE EDGES OF SYSTEM
5/8" [16mm] EXT. FINISH (BY OTHERS)

5/8"
[16mm]

CONT. BEAD OF SILICONE FULL

TINNERMAN U-CLIPS DEPTH OF VENEER 1/4" [6mm] WIDE
(7 PER FRAME) (JK090) 1 13/16"
[46mm] CONT. ALUM. COVER (J3G150) AND
CONT. ALUM. FRAME (J3A150) SPLICE PLATE (J3G150-SPL-F)
5"
CONT. VINYL GASKET (J3D505) CONT. ALUM. CENTER PLATE (J3C151)
[126mm]

300E-A07-025
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
1" 25 1/2" 13 1/4" 6
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 2"
[51mm]

REINF. EPDM VAPOR BARRIER #12 X 2" SS ROUNDED HEAD SHEET

(JL009-RVB) NOTE: SET IN CONT. METAL SCREW (JKSS20) (7 PER
BED OF BUTYL SEALANT (BY FRAME @ 18" [457mm] O.C.)
OTHERS) TERMINATE RVB AT
OUTSIDE EDGES OF SYSTEM EXT. SHEATHING ASSEMBLY
(BY OTHERS)
5/8" [16mm] EXT. FINISH (BY OTHERS)

5/8"
[16mm]

CONT. BEAD OF SILICONE FULL

TINNERMAN U-CLIPS DEPTH OF VENEER 1/4" [6mm] WIDE
3 5/16"
(7 PER FRAME) (JK090)
[84mm] CONT. ALUM. COVER (J3G150) AND
CONT. ALUM. FRAME (J3A150) SPLICE PLATE (J3G150-SPL-F)
6"
CONT. VINYL GASKET (J3D505) CONT. ALUM. CENTER PLATE (J3C152)
[152mm]

300E-A07-050
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
2" 51 1" 25 1/2" 13
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 3"
[76mm]

#12 X 2" SS ROUNDED

HEAD SHEET METAL
REINF. EPDM VAPOR BARRIER SCREW (JKSS20) (7 PER
(JL012-RVB) NOTE: SET IN CONT. FRAME @ 18" [457mm] O.C.)
BED OF BUTYL SEALANT (BY EXT. SHEATHING ASSEMBLY
OTHERS) TERMINATE RVB AT (BY OTHERS)
OUTSIDE EDGES OF SYSTEM
5/8" [16mm] EXT. FINISH
(BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
(7 PER FRAME) (JK090) CONT. BEAD OF SILICONE FULL
CONT. ALUM. 4 13/16" DEPTH OF VENEER 1/4" [6mm] WIDE
FRAME (J3A151) [122mm] CONT. ALUM. COVER (J3G151) AND
CONT. VINYL SPLICE PLATE (J3G151-SPL-F)
GASKET (J3D505) 9" CONT. ALUM. CENTER PLATE (J3C153)
[229mm]

300E-A07-075
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
3" 76 1 1/2" 38 3/4" 19
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 4"
[101mm]

#12 X 2" SS ROUNDED

HEAD SHEET METAL
REINF. EPDM VAPOR SCREW (JKSS20) (7 PER
BARRIER (JL018-RVB) NOTE: FRAME @ 18" [457mm] O.C.)
SET IN CONT. BED OF BUTYL EXT. SHEATHING ASSEMBLY
SEALANT (BY OTHERS) (BY OTHERS)
TERMINATE RVB AT OUTSIDE
EDGES OF SYSTEM 5/8" [16mm] EXT. FINISH
(BY OTHERS)

5/8"
[16mm]

CONT. BEAD OF SILICONE FULL

TINNERMAN U-CLIPS
DEPTH OF VENEER 1/4" [6mm] WIDE
(7 PER FRAME) (JK090) 6 5/16"
CONT. ALUM. [160mm] CONT. ALUM. COVER (J3G151) AND
FRAME J3A151) SPLICE PLATE (J3G151-SPL-F)

CONT. VINYL 10" CONT. ALUM. CENTER

GASKET (J3D505) [254mm] PLATE (J3C154)

300E-A07-100
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
4" 102 2" 51 1" 25
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 #12 X 2" SS ROUNDED HEAD SHEET
6" METAL SCREW (JKSS20) (7 PER
[152mm] FRAME @ 18" [457mm] O.C.)
REINF. EPDM VAPOR BARRIER EXT. SHEATHING ASSEMBLY
(JL018-RVB) NOTE: SET IN CONT. (BY OTHERS)
BED OF BUTYL SEALANT (BY
OTHERS) TERMINATE RVB AT 5/8" [16mm] EXT. FINISH
OUTSIDE EDGES OF SYSTEM (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
CONT. BEAD OF SILICONE FULL
(7 PER FRAME) (JK090)
DEPTH OF VENEER 1/4" [6mm] WIDE
CONT. ALUM. FRAME (J3A152) 9 5/16"
[236mm] CONT. ALUM. COVER (J3G152)
CONT. VINYL GASKET (J3D505) AND SPLICE PLATE (J3G152-SPL-F)
14 1/16" CONT. ALUM. CENTER PLATE (J3C155-F)
[358mm]

300E-A07-150
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
6" 152 3" 76 1 1/2" 38
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 8" #12 X 2" SS ROUNDED HEAD SHEET
[203mm] METAL SCREW (JKSS20) (7 PER
FRAME @ 18" [457mm] O.C.)
REINF. EPDM VAPOR BARRIER EXT. SHEATHING ASSEMBLY
(JL024-RVB) NOTE: SET IN CONT. (BY OTHERS)
BED OF BUTYL SEALANT (BY
OTHERS) TERMINATE RVB AT 5/8" [16mm] EXT. FINISH
OUTSIDE EDGES OF SYSTEM (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
CONT. BEAD OF SILICONE
(7 PER FRAME) (JK090) 12 3/4"
FULL DEPTH OF VENEER
CONT. ALUM. FRAME [324mm]
1/4" [6mm] WIDE
(J3A153) CONT. ALUM. COVER
CONT. VINYL GASKET (J3G153) AND SPLICE
(J3D505) 18" PLATE (J3G153-SPL-F)
[458mm]
CONT. ALUM. CENTER PLATE
(J3C156-F)

300E-A07-200
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
8" 203 4" 102 2" 51
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 REINF. EPDM VAPOR BARRIER #12 X 2" SS ROUNDED
(JL030-RVB) NOTE: SET IN 10" HEAD SHEET METAL
CONT. BED OF BUTYL SEALANT [254mm] SCREW (JKSS20) (7 PER
(BY OTHERS) TERMINATE RVB FRAME @ 18" [457mm] O.C.)
AT OUTSIDE EDGES OF SYSTEM
EXT. SHEATHING
ASSEMBLY (BY OTHERS)
5/8" [16mm] EXT.
FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS CONT. BEAD OF

(7 PER FRAME) (JK090) 16 3/4" SILICONE FULL
[425mm] DEPTH OF VENEER
CONT. ALUM. FRAME
1/4" [6mm] WIDE
(J3A154)
24" CONT. ALUM. COVER
CONT. VINYL GASKET
[610mm] (J3G154) AND SPLICE
(J8D002-M)
PLATE (J3G154-SPL-F)
CONT. ALUM.
CENTER PLATE
(J3C165-F)

300E-A07-250
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
10" 254 5" 127 2 1/2" 64
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 #12 X 2" SS ROUNDED
REINF. EPDM VAPOR BARRIER 12" HEAD SHEET METAL
(JL036-RVB) NOTE: SET IN [305mm] SCREW (JKSS20) (7
CONT. BED OF BUTYL SEALANT PER FRAME @ 18"
(BY OTHERS) TERMINATE RVB [457mm] O.C.)
AT OUTSIDE EDGES OF SYSTEM
EXT. SHEATHING
ASSEMBLY (BY OTHERS)

5/8" [16mm] EXT.

FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN CONT. BEAD OF

U-CLIPS (7 PER SILICONE FULL
FRAME) (JK090) 18 3/4" DEPTH OF VENEER
[476mm] 1/4" [6mm] WIDE
CONT. ALUM.
FRAME (J3A154) CONT. ALUM. COVER
26"
CONT. VINYL [661mm] (J3G154) AND SPLICE
GASKET PLATE (J3G154-SPL-F)
(J8D002-M)
CONT. ALUM. CENTER
PLATE (J3C166-F)

300E-A07-300
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
12" 305 6" 152 3" 76
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

SURFACE MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 1"
[25mm]

REINF. EPDM VAPOR BARRIER

(JL009-RVB) NOTE: SET IN CONT. #12 X 2" SS ROUNDED HEAD SHEET
BED OF BUTYL SEALANT (BY METAL SCREW (JKSS20) (7 PER
OTHERS) TERMINATE RVB AT FRAME @ 18" [457mm] O.C.)
OUTSIDE EDGES OF SYSTEM
EXT. SHEATHING ASSEMBLY
(BY OTHERS)
5/8" [16mm] EXT. FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS CONT. BEAD OF SILICONE FULL

(7 PER FRAME) (JK090) 1 13/16"
DEPTH OF VENEER 1/4" [6mm] WIDE
[46mm]
CONT. ALUM. FRAME (J3A150) CONT. ALUM. COVER (J3G150) AND
5" SPLICE PLATE (J3G150-SPL-F)
CONT. VINYL GASKET (J3D505)
[126mm] CONT. ALUM. CENTER PLATE (J3C151)

300E-A07-025
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
1" 25 1/2" 13 1/4" 6
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 2"
[51mm]

REINF. EPDM VAPOR BARRIER

(JL009-RVB) NOTE: SET IN CONT.
BED OF BUTYL SEALANT (BY
#12 X 2" SS ROUNDED HEAD SHEET
OTHERS) TERMINATE RVB AT
METAL SCREW (JKSS20) (7 PER
OUTSIDE EDGES OF SYSTEM
FRAME @ 18" [457mm] O.C.)
EXT. SHEATHING ASSEMBLY
(BY OTHERS)
5/8" [16mm] EXT. FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS 3 5/16"

(7 PER FRAME) (JK090) CONT. BEAD OF SILICONE FULL
[84mm] DEPTH OF VENEER 1/4" [6mm] WIDE
CONT. ALUM. FRAME (J3A150)
6" CONT. ALUM. COVER (J3G150) AND
CONT. VINYL GASKET (J3D505) SPLICE PLATE (J3G150-SPL-F)
[152mm]
CONT. ALUM. CENTER PLATE (J3C152)

300E-A07-050
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
2" 51 1" 25 1/2" 13
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 3"
[76mm]

REINF. EPDM VAPOR BARRIER #12 X 2" SS ROUNDED

(JL012-RVB) NOTE: SET IN CONT. HEAD SHEET METAL
BED OF BUTYL SEALANT (BY SCREW (JKSS20) (7 PER
OTHERS) TERMINATE RVB AT FRAME @ 18" [457mm] O.C.)
OUTSIDE EDGES OF SYSTEM EXT. SHEATHING ASSEMBLY
(BY OTHERS)
5/8" [16mm] EXT. FINISH
(BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
(7 PER FRAME) (JK090) 4 13/16" CONT. BEAD OF SILICONE FULL
CONT. ALUM. [122mm] DEPTH OF VENEER 1/4" [6mm] WIDE
FRAME (J3A151) CONT. ALUM. COVER (J3G151) AND
CONT. VINYL 9" SPLICE PLATE (J3G151-SPL-F)
GASKET (J3D505) [229mm] CONT. ALUM. CENTER PLATE (J3C153)

300E-A07-075
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
3" 76 1 1/2" 38 3/4" 19
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 4"
[101mm]

REINF. EPDM VAPOR #12 X 2" SS ROUNDED

BARRIER (JL018-RVB) HEAD SHEET METAL
NOTE: SET IN CONT. BED SCREW (JKSS20) (7 PER
OF BUTYL SEALANT (BY FRAME @ 18" [457mm] O.C.)
OTHERS) TERMINATE RVB EXT. SHEATHING ASSEMBLY
AT OUTSIDE EDGES OF (BY OTHERS)
SYSTEM
5/8" [16mm] EXT. FINISH
(BY OTHERS)
5/8"
[16mm]

TINNERMAN U-CLIPS CONT. BEAD OF SILICONE FULL

(7 PER FRAME) (JK090) DEPTH OF VENEER 1/4" [6mm] WIDE
6 5/16"
CONT. ALUM. [160mm] CONT. ALUM. COVER (J3G151) AND
FRAME J3A151) SPLICE PLATE (J3G151-SPL-F)
10"
CONT. VINYL [254mm] CONT. ALUM. CENTER
GASKET (J3D505) PLATE (J3C154)

300E-A07-100
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
4" 102 2" 51 1" 25
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 #12 X 2" SS ROUNDED HEAD SHEET
6"
METAL SCREW (JKSS20) (7 PER
[152mm]
REINF. EPDM VAPOR BARRIER FRAME @ 18" [457mm] O.C.)
(JL018-RVB) NOTE: SET IN CONT. EXT. SHEATHING ASSEMBLY
BED OF BUTYL SEALANT (BY (BY OTHERS)
OTHERS) TERMINATE RVB AT
OUTSIDE EDGES OF SYSTEM 5/8" [16mm] EXT. FINISH
(BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
(7 PER FRAME) (JK090)
CONT. BEAD OF SILICONE FULL
CONT. ALUM. FRAME (J3A152) 9 5/16" DEPTH OF VENEER 1/4" [6mm] WIDE
CONT. VINYL GASKET (J3D505) [236mm] CONT. ALUM. COVER (J3G152)
AND SPLICE PLATE (J3G152-SPL-F)
14 1/16" CONT. ALUM. CENTER PLATE (J3C155-F)
[358mm]

300E-A07-150
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
6" 152 3" 76 1 1/2" 38
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 8" #12 X 2" SS ROUNDED HEAD SHEET
[203mm] METAL SCREW (JKSS20) (7 PER
REINF. EPDM VAPOR BARRIER FRAME @ 18" [457mm] O.C.)
(JL024-RVB) NOTE: SET IN CONT. EXT. SHEATHING ASSEMBLY
BED OF BUTYL SEALANT (BY (BY OTHERS)
OTHERS) TERMINATE RVB AT
OUTSIDE EDGES OF SYSTEM 5/8" [16mm] EXT. FINISH
(BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
(7 PER FRAME) (JK090) 12 3/4" CONT. BEAD OF SILICONE
CONT. ALUM. FRAME [324mm] FULL DEPTH OF VENEER
(J3A153) 1/4" [6mm] WIDE
CONT. ALUM. COVER
CONT. VINYL GASKET
(J3G153) AND SPLICE
(J3D505)
18" PLATE (J3G153-SPL-F)
[458mm] CONT. ALUM. CENTER PLATE
(J3C156-F)

300E-A07-200
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
8" 203 4" 102 2" 51
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 REINF. EPDM VAPOR BARRIER
10" #12 X 2" SS ROUNDED
(JL030-RVB) NOTE: SET IN
[254mm] HEAD SHEET METAL
CONT. BED OF BUTYL SEALANT
SCREW (JKSS20) (7 PER
(BY OTHERS) TERMINATE RVB
FRAME @ 18" [457mm] O.C.)
AT OUTSIDE EDGES OF SYSTEM
EXT. SHEATHING
ASSEMBLY (BY OTHERS)
5/8" [16mm] EXT.
FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN U-CLIPS
(7 PER FRAME) (JK090) CONT. BEAD OF
16 3/4" SILICONE FULL
CONT. ALUM. FRAME DEPTH OF VENEER
[425mm]
(J3A154) 1/4" [6mm] WIDE
CONT. VINYL GASKET CONT. ALUM. COVER
(J8D002-M) 24" (J3G154) AND SPLICE
[610mm] PLATE (J3G154-SPL-F)
CONT. ALUM.
CENTER PLATE
(J3C165-F)

300E-A07-250
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
10" 254 5" 127 2 1/2" 64
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com
 REINF. EPDM VAPOR BARRIER #12 X 2" SS ROUNDED
(JL036-RVB) NOTE: SET IN 12" HEAD SHEET METAL
CONT. BED OF BUTYL SEALANT [305mm] SCREW (JKSS20) (7
(BY OTHERS) TERMINATE RVB PER FRAME @ 18"
AT OUTSIDE EDGES OF SYSTEM [457mm] O.C.)
EXT. SHEATHING
ASSEMBLY (BY OTHERS)

5/8" [16mm] EXT.

FINISH (BY OTHERS)

5/8"
[16mm]

TINNERMAN
U-CLIPS (7 PER CONT. BEAD OF
FRAME) (JK090) 18 3/4" SILICONE FULL
[476mm] DEPTH OF VENEER
CONT. ALUM.
FRAME (J3A154) 1/4" [6mm] WIDE
CONT. VINYL 26" CONT. ALUM. COVER
GASKET [661mm] (J3G154) AND SPLICE
(J8D002-M) PLATE (J3G154-SPL-F)
CONT. ALUM. CENTER
PLATE (J3C166-F)

300E-A07-300
JOINT WIDTH MOVEMENT ±
HORIZONTAL VERTICAL
US mm US mm US mm
12" 305 6" 152 3" 76
FINISH: CLEAR ANODIZED

PROJECT: DATE: 1/20/16

EXTERIOR GLIDE PLATE
CUSTOMER: WALL/WALL-CEILING/CEILING SCALE: 1:2

FLUSH MOUNT CONDITION

LOCATION: DOC: CADJM.184/R3
For More Information Visit: Inprocorp.com