Scribd
Upload
46 views1 page

Danby_App_Guide_ENG

Uploaded by

Jason Palmer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views1 page

Danby_App_Guide_ENG

Uploaded by

Jason Palmer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

QUICK-START GUIDE:

DANBY SMART HOME APP FOR YOUR DANBY SMART APPLIANCE

Download the ‘Danby Smart Home’ • Apple App Store


INSTALL APP app to your smart mobile device • Android Google Play
from either:

2 USER REGISTRATION AND NETWORK CONFIGURATION

Register x6

A. Launch the Danby Smart B. Connect the power to C. Press the ‘Fan’ button D. Open the app and
Home app and register an your device without six times. The unit will “Add Device”
account.Registration can turning on the device. display rapidly flashing
either be by email or mobile # “AP”.

Add Manually Auto Scan


Only 2.4 GHz Wi-Fi networks
are supported
Connecting...
Place your router, mobile phone,
4% and device as close as possible Portable Air Conditioner
SSID Device found Device added succesfully
Register Device to Smart Cloud
Initializing device...
Password

E. Choose your appliance type. F. A 2.4 GHz Wi-Fi network G. The APP software H. Installation Complete. You can
is required to complete automatically matches the rename the device to a name
the setup. Enter SSID device and the home of your choosing.
information and password network. Installation takes
and click ‘Confirm’. around 60 to 90 seconds
to complete

Only 2.4 GHz Wi-Fi networks


Device not responding are supported
Try “Switch Pairing Mode”
Confirm indicator slowly blink Go to Connect
SSID
Switch Pairing Mode

Password

I. In some instances, the J. Confirm that the unit is K. A 2.4 GHz Wi-Fi network L. In phone settings, go to Wi-Fi
previous configuration displaying ‘AP’ and move is required to complete settings and select the AC
process might fail. If all 3 to the next phase. the setup. Enter SSID device name ‘SmartLife-xxxx’.
requirements above are met information and password
and you still can’t connect, and click ‘Confirm’. Following this step, please
follow to the ‘Switch Pairing refer to step G and H.
Mode’ instruction.

3 USING THE APP

Call us 1-800-263-2629
[email protected]

You might also like