DAF

IVECO

DAF - IVECO -
www.kstools.com

SPECIAL TOOLS
 DAF - IVECO - SPECIAL TOOLS
455.0110 COOLING SYSTEM EXPANDER CONE TEST ADAPTER
COMMERCIAL VEHICLE COOLING SYSTEM TESTING EQUIPMENT 9 •
•
For testing pressure and diagnosing leaks in the coolant system
Also suitable for filling the cooling system alongside a filling valve
• For the diagnosis of leakages on coolent systems pcs
• The pressure generated holds the matching rubber cone in the cooler or expansion tank opening
• 7 adaptors ≈ 85% coverage of all commercial vehicles
• Can be fitted directly onto the cooler or expansion tank
• Optimal and safe seat like original cover
• Secure fit due to expansion
• Manometer with protective rubber cap
• No need to purchase expensive individual adapters
• Metall hand pump and flexible tube with decompression valve
• Removes need to purchase single adapters
• Sturdy design
• Simple handling
• Special tool steel
• Optimal use alongside KS Test pump 455.0111
• Robust design made from POM (polyoxmethylene)

6x M42x3,0 - M45x3,0
M45x4,0 - M52x3,0
M62x4,0 - M72x4,0

Ø Height
mm mm
455.0141 17,0 - 37,0 170,0 € 47,90
455.0142 28,0 - 41,0 170,0 € 48,90
455.0143 37,0 - 50,0 170,0 € 49,90
268, 90
€ 455.0144 47,0 - 60,0 170,0 € 50,90

460.5245 460.3745
INJECTION SOCKET FOR DAF SEALING RING MOUNTING KIT FOR DAF 5
• 12 point • for the assembly of sealing rings pcs
• Ideally suited for dismantling and mounting the union nut on high-pressure lines on the injection valve of the • especially for the front crankshaft radial seal ring with a height of 16 mm,
common rail system inner diameter 70 mm, outer diameter 100 mm
• with side window and open for use on injection lines • Including retraction tool
• Internal square to DIN 3120 / ISO 1174 with ball reception • Special tool steel
• For manual operation
• Burnished Application range: DAF (CF65, LF45, LF55, SB), Irisbus (Euromidi, Europolis, Midirider, Proway),
• Special tool steel Iveco (Eurocargo I-III, Eurofire, Tector, Vertis), Kamaz 4

Application range: DAF with Euro 6 e.g. XF and CF (engine: MX11/MX13)

21 mm

24,90 €
Profile size Ø Length

143,90 €
mm mm mm
21 34 90,0

460.3670 460.4030
INJECTOR SERVICE KIT FOR DAF 3 SEALING RING MOUNTING KIT FOR DAF 7
• For assembly and disassembly of valve springs and valves pcs • for the assembly of sealing rings pcs
• with mounted or dismounted cylinder head • especially for the front crankshaft radial seal with a height of 16 mm,
• time- and cost-efficient inner diameter of 134 mm and outer diameter of 161 mm
• Removal of cylinder head not necessary for repair of valve shaft seals or valve springs • drawing tool
• Fixing via pump-nozzle guide • Special tool steel
• Special tool steel
Application range: DAF (CF85, CF, XF105, XF), Solaris Vacanza
Application range: DAF (CF85)

220,90 € 228,90 €
*This is an limited special price offer - only until stocks last.
2 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
460.3680 455.0106
SEALING RING MOUNTING KIT FOR DAF 7 ENGINE CAMSHAFT ROTATOR FOR DAF
• for the assembly of sealing rings pcs • Allows the engine crank to be manually adjusted
• especially for the front crankshaft radial seal ring with a height of 16 mm, • Allows pinpoint accuracy calibration
internal diameter 166 mm, external diameter 191 mm • Ideal for adjustments to the engine
• Including retraction tool • Internal square drive to DIN 3121 / ISO 1174
• Special tool steel • Special tool steel

Application range: DAF (CF85, CF, XF105, XF), Irizar (i3, i4, i6, i8, PB), Solaris Vacanza, Van Hool (Acron, Altano, Application range: XF105 Euro5 etc.
Astromega, Astron, Astronef, EX Series, T Series), VDL (Futura, Jonkheere)

35,90 €
Quantity D1 D2 L
Teeth mm mm mm
9 27,0 33,0 81,0

460.3980
ENGINE SPINNING DEVICE FOR IVECO
• With 6 point drive SW22
• Allows the engine crank to be manually adjusted
• Allows pinpoint accuracy calibration
• Ideal for adjustments to the engine
• Special tool steel

Application range: Iveco Euro Cargo, Cargo 150E27R PR, FPR, 320E27T, PT Eurotech, Eurostar

203,90 €
6-point Quantity A B H

236,
mm Teeth mm mm mm
90
€ 22 13 105,0 70,0 125,0

455.0105 460.5610
ENGINE CAMSHAFT ROTATOR FOR DAF ENGINE SPINNING DEVICE FOR IVECO
• Allows the engine crank to be manually adjusted • With 6 point drive SW22
• Allows pinpoint accuracy calibration • Allows the engine crank to be manually adjusted
• Ideal for adjustments to the engine • Allows pinpoint accuracy calibration
• With external drive hexagonal socket 24.0 mm • Ideal for adjustments to the engine
• Special tool steel • Special tool steel

Application range: e.g. 65CF, 75CF, 85CF, 95XF, CF75, CF85,F65, F75, F85, F95, XF95 Application range: Iveco Euro Cargo, Cargo models, Eurotech, Heavy, Off-Road, Bus

69,90 € 191,90 €
6-point Quantity L B H 6-point Quantity A B H
mm Teeth mm mm mm mm Teeth mm mm mm
24 11 90,0 40,0 90 22 13 105,0 70,0 126,0

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
3
 DAF - IVECO - SPECIAL TOOLS

HEXAGON IMPACT SOCKET PISTON RING INSTALLATION AID FOR DAF

• ideally suited for mounting and dismounting screws on the flywheel • facilitates mounting of the piston in the liner
• 6 point • conical mounting sleeve with centring
• According to DIN 3129 / ISO 2725-2 • Enormous time and cost saving
• Internal square drive to DIN 3121 / ISO 1174 • Special tool steel
• Short execution
• For machinery usage
• Phosphate finish
• Chrome molybdenum

Application range: MAN TGA, TGX, TGS, Iveco Euro Trakker and Euro Tech

38 mm
Spanner width mm L D1 D2 T
mm mm mm mm
D1 D2
515.1019 19,0 38,0 28,0 28,0 13,0 € 2,90 mm mm
515.1021 21,0 38,0 30,0 30,0 14,0 € 2,90 460.1095 137,0 130,0 € 58,90
515.1024 24,0 38,0 34,0 30,0 15,0 € 3,90 460.3675 134,0 130,0 € 56,90

460.1815
CYLINDER LINER EXTRACTOR SET 6
• Ideal for removing of cylinder liner in commercial vehicles and industrial bearing pcs
• Outriggers suitable especially for large cylinder liners and bearings
• Suitable for cylinder liner with Ø 60 – 160 mm
• Solid state
• 3 spreader guarantee an optimal adjustment of the internal extractor
• Extremely robust spindle with inductively hardened thread
• Lower power usage
• Enormous time and cost saving
• Special tool steel
• In durable plastic storage case

Application range: Cylinder liner on MAN, Mercedes etc.

Ø 60 - 160 mm

493,90 €
*This is an limited special price offer - only until stocks last.
4 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
460.0830
CYLINDER LINER EXTRACTOR SET 14
• Ideal for removing of cylinder liner in commercial vehicles and industrial bearing pcs
• Outriggers suitable especially for large cylinder liners and bearings
• suitable for cylinder liners with inner-Ø 119 - 136.5 mm
• Solid state
• Optimum fit of the internal extractor for different vehicle manufacturers
• Extremely robust spindle with inductively hardened thread
• Lower power usage
• Enormous time and cost saving
• Special tool steel
• In durable steel storage case

Application range: Cylinder liners on Fuso 3.5t, 15t, 330, Hino 750, Scania 310, Volvo FL10, FM12, DAF and buses

1129,90 €

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
5
 DAF - IVECO - SPECIAL TOOLS
460.0850
UNIVERSAL ENGINE AND GEAR HOLDER WITH ROTARY FUNCTION
• ideally suited for work on dismantled engines, transmissions and differential gears
• Interchangeable mounting plates optionally available
• Mounting plate 360° rotatable by hand crank
• Stable construction
• Left- and right-hand rotation
• safe stand due to five rotating feet
• low space requirement when retracted
• Distance of telescopic arms 775 mm

MAX. LOAD:

1.350 mm
1.360 KG

m
m
600
- 1.
0
15
1.

1.000 m
m

9189,90 €
460.5550 460.4185
MOTOR MOUNTING PLATE FOR DAF COMPRESSOR BEARING SPECIAL SOCKET FOR DAF
• Ideally suited to working on removed engines • Ideally suited for removing the screw from the rear compressor bearing
• Stable construction • 11-point
• Special tool steel • With 1/2” square drive
• for use with universal motor and gear holder (460.0850) • Chrome molybdenum

Application range: DAF 85 (CF)

65 mm

378,90 € 34,90 €
*This is an limited special price offer - only until stocks last.
6 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
460.3735 450.0330
TRANSMISSION INPUT SHAFT SEAL INSTALLATION TOOL FOR DAF VIBRO-IMPACT UNIVERSAL BALL JOINT PULLER BELL 58 X 115 MM
• Washer installation aid for manual use • Trapezoidal spindle
• For damage free mounting • High release force due to rotary shock pulse with impact wrench
• Extremly versatile • Impact screws create pressure and vibration at the same time, through which the secure ball joint connec-
• Special tool steel tions and quickly and safely removed
• Less space required
Application range: DAF LF55, CF65 (gearbox input shaft) • Cast forged execution
• With inspection panel
245 mm • Internal square drive to DIN 3120 / ISO 1174
• Special tool steel

Application range: e.g. DAF / Scania and other european commercial vehicle

89,90 €
Internal Ø External Ø Length
mm mm mm
49,0 65,0 245,0

460.0735
GEAR BOX ASSEMBLY AND DISASSEMBLY SET FOR MAN / 8
MERCEDES ZF 16S pcs
• For assembly and disassembly of the ZF 16S gear box
• Extremely sturdy execution
• Special tool steel

532,90 €
• In durable metal case

Application range: Assembly and disassembly of the ZF 16S gear box (Mercedes, DAF, etc.)

A B C H L2 L3
mm mm mm mm mm mm
58,0 115,0 137,0 162,0 70,0 115,0

195 - 205 - 275 mm

1789,90 €
*This is an limited special price offer - only until stocks last.
All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
7
 DAF - IVECO - SPECIAL TOOLS
460.3620
KINGPIN PRESS 75T WITH SET OF SLEEVES 29
• Suitable for quick insertion and removal of king pins pcs
• Ideal for cylindrical and conical bolts
• No removal of the axle required
• Press unit is 360° rotatable
• Open width 260 mm
• Swivelling, rotatable and with height adjustment for components that are difficult to access
• Including pneumatic hydraulic foot pump with quick lift, hydraulic cylinder, most common sleeves and pressure pieces
• Secure and easy to use
• Special and compact design
• time- and cost-efficient

Ø 24 mm

Ø 34 mm

Ø 47 mm

Ø 47 mm

Ø 47 mm

Ø 39 mm Ø 50 mm Ø 61 mm Ø 95 mm

Technical data:
Capacity: 75 t
Stroke: 160,0 mm
Operating pressure max:
Volume:
700 bar
1,8 l 4990,00 €
*This is an limited special price offer - only until stocks last.
8 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
460.3925 460.0610
DOUBLE WISHBONE BUSHES SET FOR DAF Ø 70 MM 8 SLOTTED NUT WRENCH FOR STEERING LINKAGE FASTENING WITH 4 PINS FOR
• For mounting and dismounting the bushings on the wishbone of the rear axle pcs DAF
• Suitable for the front bearing and for the rear bearings with Ø 70mm • ideal for tightening and loosening groove nuts on steering rods
• Secure and easy to use • Internal square drive to DIN 3121 / ISO 1174
• In conjunction with a workshop press • High accuracy of fit
• Special tool steel • Extremely robust version
• Slim design
Application range: DAF wishbone at the rear axle • Suitable for exact torque possible
• Special tool steel

48,90 €
D1 D2 Number of B Height
mm mm studs mm mm
52,0 41,0 4 5,0 78,0

460.3820
SPECIAL 12-SIDED KEY FOR IVECO
• 12-sided special wrench
• for mounting and dismounting the steering column screw connection
• Extremely robust
• Special tool steel

Application range: Iveco 12 t, 17 t

684, 90
€

460.4160
SOCKET AND WISHBONE SET FOR DAF Ø 75 MM 8
• For mounting and dismounting the bushings on the wishbone of the rear axle pcs mm
• Suitable for the front and rear bearings with Ø 75mm 300
• Secure and easy to use
• In conjunction with a workshop press
• Special tool steel

Application range: DAF wishbone at the rear axle

78,90 €
Spanner Length
width mm mm
65 300,0

460.4190
AXLE NUT SOCKET FOR DAF
• Internal square drive to DIN 3121 / ISO 1174
• 6 point
• Any extensive slipping is avoided
• Extremely robust version
• Suitable for high tightening and loosening torque
• Can be used with an impact wrench or torque wrench
• Chrome molybdenum

Application range: DAF (CF) EURO 5 drive axle nut

259,90 €
Spanner D Height

645, 90 width mm mm mm
€ 120,0 158,0 106,0

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
9
 DAF - IVECO - SPECIAL TOOLS
460.1085 460.5333
WRENCH WITH 6 PINS FOR DAF AXLE NUT WRENCH FOR IVECO
• Internal square drive to DIN 3121 / ISO 1174 • Internal square drive to DIN 3121 / ISO 1174
• High accuracy of fit • 6 point
• Special profile with 6 internal studs • High accuracy of fit
• Extremely robust version • Extremely robust version
• Suitable for high tightening and loosening torque • Suitable for high tightening and loosening torque
• Special tool steel • Special tool steel

Application range: DAF CF85 transmission (EURO 4 and EURO 5) Application range: Iveco Euro Cargo HA

107,90 € 208,90 €
Height D1 D2 D3 Number of B Spanner width Ø Height
mm mm mm mm studs mm mm mm mm
55,0 91,0 74,0 66,0 6 6,7 90 117 69,0

460.3730 460.1040
WRENCH WITH 6 PINS FOR DAF AXLE NUT WRENCH FOR IVECO
• Internal square drive to DIN 3121 / ISO 1174 • Six sided drive 36 mm
• High accuracy of fit • 6 point
• Special profile with 6 internal studs • Any extensive slipping is avoided
• Extremely robust version • Extremely robust version
• Suitable for high tightening and loosening torque • Suitable for high tightening and loosening torque
• Special tool steel • Can be used with an impact wrench or torque wrench
• Special tool steel
Application range: DAF LF45 rear axle
Application range: Iveco Euro Cargo

146,90 € 203,90 €
H D1 D2 D3 Number of B T Spanner width 6-point Ø Height
mm mm mm mm studs mm mm mm mm mm mm
87,0 109,0 98,0 86,0 6 10,5 20,0 98,0 36 122,0 115,0

460.4170 450.0200
AXLE NUT IMPACT SOCKET FOR IVECO AXLE NUT WRENCH FOR IVECO
• Internal square drive to DIN 3121 / ISO 1174 • Six sided drive 36 mm
• 12 point • Positive drive of the axle nut
• Any extensive slipping is avoided • Any extensive slipping is avoided
• Extremely robust version • Milled out profile
• Suitable for high tightening and loosening torque • Sturdy design
• Can be used with an impact wrench or torque wrench • Can be used with an impact wrench or torque wrench
• Special tool steel • Special tool steel

Application range: Iveco Euro Cargo etc.

129,90 € 220,90 €
Spanner width Ø Height Spanner width 6-point D1 T Height
mm mm mm mm mm mm mm mm
85,0 83,0 58,0 98,0 36 122,0 72,0 120,0

*This is an limited special price offer - only until stocks last.

10 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
450.0203 460.4370
AXLE NUT WRENCH FOR IVECO WITH GUIDE COLLAR WHEEL BEARING INSTALLATION AID FOR DAF
• Six sided drive 36 mm • Ideally suited for mounting the wheel bearing and the sealing ring on the front axle
• Positive drive of the axle nut • Facilitates installation due to constant force
• Any extensive slipping is avoided • time- and cost-efficient
• Milled out profile • Special tool steel
• Sturdy design
• Can be used with an impact wrench or torque wrench Application range: DAF CF
• Special tool steel

Application range: Iveco Eurotech Cursor HA etc.

276,90 € 84,90 €
Spanner width External hexagon Ø Height D1 D2 D3 H1 H2
mm drive in mm mm mm mm mm mm mm mm
110,0 36 133,0 116,0 73,5 81,5 137,5 22,6 35,0

460.4165 460.4375
AXLE NUT SOCKET FOR IVECO WHEEL BEARING INSTALLATION AID FOR DAF
• Six sided drive 36 mm • Ideally suited for mounting the wheel bearing and the sealing ring on the front axle
• 12 point • Facilitates installation due to constant force
• Any extensive slipping is avoided • time- and cost-efficient
• Extremely robust version • Special tool steel
• Suitable for high tightening and loosening torque
• Can be used with an impact wrench or torque wrench Application range: DAF CF
• Special tool steel

Application range: Axle nut Iveco Eurotech-Cursor

203,90 € 82,90 €
Spanner width External hexagon Ø Height D1 D2 D3 H1 H2
mm drive in mm mm mm mm mm mm mm mm
105,0 36 128,0 116,0 61,5 69,5 124,5 22,6 35,0

460.5455 460.4380
AXLE NUT WRENCH FOR RENAULT AND IVECO WHEEL BEARING INSTALLATION AID FOR DAF
• Internal square drive to DIN 3121 / ISO 1174 • Ideally suited for mounting the wheel bearing and the sealing ring on the front axle
• 6 point • Facilitates installation due to constant force
• High accuracy of fit • time- and cost-efficient
• Extremely robust version • Special tool steel
• Suitable for high tightening and loosening torque
• Special tool steel Application range: DAF CF

197,90 € 93,90 €
Spanner width Ø Height D1 D2 D3 H1 H2
mm mm mm mm mm mm mm mm
80 100 137,5 91,5 99,5 147,5 22,6 35,0

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
11
 DAF - IVECO - SPECIAL TOOLS
460.1705
SLOT BUSHING TOOL SET FOR SILENT BEARING SLOT BUSHES 19
• Suitable for the installation and removal of the bearing bushes in commercial vehicle spring suspension pcs
• The slotted bushes can be effortlessly preloaded using the clamping block and the accompanying half shells and thus adjusted to the installation dimensions
• Includes 12 t hydraulic cylinder, especially in the construction of fixed bushes
• The hydraulic cylinder is made for universal usage
• Supplied without hydraulic pump max.
• Optional: Hand pump 640.0010 12t
• Optional: Air Hydraulic Pump 640.0020
• Optional: Electric Hydraulic Pump 640.0030
• Special installation method that protects the bush via parallel working tensioning elements
• The function of the bearing bush is retained
• Simple handling and quick assembly times
• Safe working
• Suitable for bush change directly on the vehicle

Application:
Ø 51 mm - Volvo FM12 Original *CEJN®
Ø 60 mm - DB / Renault (430/450/460)
Ø 68 mm - MAN-TGA (140/414/460) front axle spring ROR, SAF

Ø 68 mm Ø 60 mm
MAN-TGA Ø 51 mm RENAULT
(410/414/460) VOLVO(FM12) (430/450/460)

1819,90 €
640.0010 640.0020
HYDRAULIC HAND PUMP PNEUMATIC HYDRAULIC PUMP
• Single stage • Pneumatic working
• Reverse valve for advance and return stroke • For simply agent press cylinders
• Safety valve for overload protection • Safety valve for overload protection
• Includes pressure tube 1.8 meters • Includes pressure tube 1.8 meters
• Usable tank volume 2081cm³ = 2.081l • Usable tank volume 2081cm³ = 2.081l
• Operating pressure max. 700 bar
• Output per stroke:
0.8 l/min up to 200 bar
0.1 l/min up to 700 bar
119 mm

200 mm
m
585 m

m
255 m

1187,90 € 2037,90 €
Connection thread Length Width H Output per stroke Connection thread Length Width H
mm mm mm cm³ mm mm mm
3/8” - 18 NPT 585 133 119 2,62 3/8” - 18 NPT 255 130 200

640.0030
ELECTRIC HYDRAULIC PUMP
• Two stepped for simply agent press cylinders
• Safety valve for overload protection
• Usable tank volume 1900 cm³ = 1.9l
• Includes pressure tube 1.8 meters
• Motor specification 0.37kW - 220/230 V - 50/60 hertz, single phase (3.2 amps)
1. Step: max. 13 bar
362 mm

2. Step: max. 700 bar

• Output per stroke:
1. Step: 3.31 l/min
2. Step: 0.32 l/ min

Length Width H

5493,90 €
Connection thread mm mm mm
3/8” - 18 NPT 244 244 362

*This is an limited special price offer - only until stocks last.

12 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 Our commercial vehicle special catalogues

LL22-14D_EUR LL22-12D_EUR

LL22-14EN_EUR LL22-12EN_EUR

LL22-16D_EUR LL22-15D_EUR

LL22-16EN_EUR LL22-15EN_EUR

LL22-13D_EUR

LL22-13EN_EUR
www.kstools.com
13
 DAF - IVECO - SPECIAL TOOLS
460.1025 460.4155
SLOTTED NUT WRENCH WITH 4 PINS FOR DAF DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 8
• Internal square drive to DIN 3121 / ISO 1174 • For damage-free mounting and dismounting of the differential’s main shaft bearings pcs
• High accuracy of fit • Extremely sturdy execution
• Special profile with 4 internal studs • Including 2 half-shell pairs
• Extremely robust version • Trapezoid thread spindle for high removal power - drive 30 mm
• Suitable for high tightening and loosening torque • Special tool steel
• Special tool steel
Application range: DAF (CF) 35 t
Application range: DAF XLR (Euro 4) centre drive shaft bearing

82,90 €
D1 D2 D3 Number of B H

1079,90 €
mm mm mm studs mm mm
72,0 57,0 50,0 4 6,0 55,0

460.3685 460.3690
DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 10 DIFFERENTIAL MAIN SHAFT BEARINGS PULLER SET FOR DAF 14
• For damage-free mounting and dismounting of the differential’s main shaft bearings pcs AND SCANIA pcs
• Extremely sturdy execution
• For damage-free removal of the main shaft bearings of the differential
• Including 2 half-shell pairs
• Extremely sturdy execution
• Trapezoid thread spindle for high removal power - drive 30 mm
• Including 4 half-shell pairs
• Special tool steel
• Trapezoid thread spindle for high removal power - drive 30 mm
• Special tool steel
Application range: DAF (CF) 35 t
Application range: DAF (CF) 35 t

843,90 € 1589,90 €
517.0926
SLOGGING 6 POINT SPANNER WITH 2 STRIKING FACES
• 6 point
• Ideal for loosening and tightening TORX® screws on brake calliper screw connections to the rear axle
• With 3/4 “ square drive for the correct tightening of the screw
• With lasered troque formula for calculating the correct effective length
• With 2 impact area
• Phosphate finish
• Chrome vanadium

26 mm

226 mm

Spanner A B L
width mm
26
mm
12,0
mm
52,0
mm
226,0 48,90 €
*This is an limited special price offer - only until stocks last.
14 All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
 DAF - IVECO - SPECIAL TOOLS
460.5281 430.0619
OIL SERVICE SPECIAL PROFILE TOOL FOR PLASTIC OIL DRAIN PLUGS OIL DRAIN PLUG FOR DAF AND MAN
DAF AND MAN • Hexagon socket
• Special profile • With washer
• Special Bits for Assembly and Disassembly of Plastic Oil Drain Screws on Plastic Oil Sump
• External hexagon drive to DIN 3126 / ISO 1173 - C 6,3
• Custom-fit profile to ensure correct operation
• For manual operation
• Phosphate finish
• Special tool steel

13,90 € 12,00 €
6-point Profile size
mm mm Content
17 8,5 1 8,5

430.0610 430.0611
OIL DRAIN PLUG M22 X 1.5 X 21 MM FOR IVECO OIL DRAIN PLUG M22 X 1.5 X 16 MM FOR IVECO
• External hexagon • Hexagon socket
• With washer • With washer

10,90 € 13,70 €
Content Content

1 33 1 12

430.0612 430.0616
OIL DRAIN PLUG M22 X 1.5 X 13 MM FOR IVECO OIL DRAIN PLUG M22 X 1.5 X 17 MM FOR DAF
• Hexagon socket • Internal square
• With washer • With washer

29,10 € 39,10 €
Content Content

1 12 1 10

430.0617 430.0618
OIL DRAIN PLUG M22 X 1.5 X 18 MM FOR DAF OIL DRAIN PLUG M26 X 1.5 X 20 MM FOR DAF
• Hexagon socket • External hexagon
• With washer • With washer

47,30 € 22,00 €
Content Content

1 12 1 22

HUB NUT CENTERING AND PROTECTING SLEEVES SET

• For fast disassembly and assembly of truck tyres
• To fix the brake drum
• No slipping while the disassembly and assembly
• Protects hub nut threads
• Exact centering of the wheel to hub nut
• Special tool steel

Application: DAF, Unimog, Iveco, MAN, Renault, Volvo

Content Rimmm
hole Ø Length Jaw open- Spanner
mm ing inche width mm
450.0372 M18x1,5 3 21,0 100,0 1/2” € 63,90
450.0373 M18x1,5 3 24,0 100,0 1/2” € 65,90
450.0370 M22x1,5 2 26,0 145,0 19,0 € 86,90

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted. Prices valid up to
31.12.2022
15
 ...AND YOU WANT
MORE?

WWW.KSTOOLS.COM

SPECIAL TOOLS FOR

COMMERCIAL VEHICLES
AND TRANSPORTER
23 CHAPTER
4.672 ARTICLES
528 PAGES

KS Tools Werkzeuge - Maschinen GmbH

Your Local Distributor
Seligenstädter Grund 10 - 12
D-63150 Heusenstamm
LL22-14EN_EUR

GERMANY
Tel.: +49(0) 61 04 49 74-0
Fax: +49(0) 61 04 49 74-11
e-mail: [email protected]
www.kstools.com

*This is an limited special price offer - only until stocks last.

All prices are ex. VAT. With the release of this leaflet all previous prices became invalid. Sold only in specialist stores. Print mistakes, errors and technical alterations excepted.
Prices valid up to 31.12.2022