127 mm X 50 mm 127 mm X 50 mm

PRESSED STEEL PRESSED STEEL

DOUBLE REBATE FRAME DOUBLE REBATE FRAME
3.76 1.80
0.88 2.00 B 0.88 1.06 0.74 89 mm X 50 mm
PRESSED STEEL Architecture

SINGLE REBATE FRAME

PRESSED STEEL GENERAL NOTES:-
FRAME 50mmx127mm
1.06 0.90
0.45

0.45
FG FG FG FG FG FG · THIS DRAWING IS THE PROPERTY OF THE
FIXED GLASS
DEPARTMENT OF ARCHITECTURE, GOVT. OF
PRESSED STEEL HARYANA. THIS DRAWING MAY NOT BE
FRAME 50mmx127mm ALTERED, COPIED, USED IN WHOLE OR IN
PART WITHOUT THE PERMISSION OF THIS
FG FG TOP RAIL (121"X4") FG DEPARTMENT IN WRITING.
1.17

1.17
2.37

2.37
WIRE MESH SHUTTER · THE DISCREPANCY, IF ANY MUST BE

2.60

2.60
SOLID FLUSH
SHUTTER I.S.I. MARKED BROUGHT TO THE NOTICE OF THE

2.15
DEPARTMENT OF ARCHITECTURE HARYANA
SOLID FLUSH BEFORE ANY ACTION AT SITE.
SHUTTER I.S.I. MARKED

2.15
· REVISED SPECIFICATIONS APPROVED BY
0.74

FG

0.74
0.61
FG
0.61

0.23
LOCK RAIL (121"X6") FG THE ECONOMY COMMITTEE FOR P.H.C. / C.H.C.
SHALL BE FOLLOWED.
A A' OUT SIDE IN SIDE · JOINERY MAY BE FABRICATED AFTER
BOTTOM RAIL (121"X8") CONFIRMING THE SIZE OF PHYSICAL OPENING
AT SITE.
B'
0.23

WIRE MESH SHUTTER D/G SOLID FLUSH SEC. AT B-B' WIRE MESH SHUTTER SOLID FLUSH D1 D2 · STANDARD SIZE OF PRESSED STEEL
(OUTSIDE) SHUTTER (INSIDE)
(OUTSIDE) 3.76X2.60 SHUTTER (INSIDE)
D1/G1 1.06 X 2.15 0.90 X 2.15 FRAME HAS BEEN MENTIONED IN THE

0.23
(MAIN ENTRANCE) 1.80 X 2.60 ( INTERNAL DOORS) ( FEEDING ROOM)
DRAWINGS THESE SHALL BE AS PER
APPROVED DNIT.
(SIDE ENTRANCES)
PRESSED STEEL FRAME
127mm x 50mm SPECIFICATION:-
SOLID FLUSH
SHUTTER I.S.I. MARKED FIX GLASS
IN SIDE · ALL DOOR AND WINDOW &
VENTILATORS SHALL HAVE PRESSED
STEEL FRAMES WITH STANDARD STEEL
OUT SIDE SECTIONS AS PER DETAILED DRAWINGS.
WIRE MESH SHUTTER

PLAN AT A-A' · SHUTTERS FOR ALL DOORS SHALL BE

FLUSH SHUTTERS ISI MARKED.

89 mm X 50 mm · MS GRILL SHALL BE PROVIDED IN ALL

127 mm X 50 mm 127 mm X 50 mm 127 mm X 50 mm PRESSED STEEL EXTERNAL WINDOWS & VENTILATORS.
PRESSED STEEL PRESSED STEEL PRESSED STEEL SINGLE REBATE FRAME
DOUBLE REBATE FRAME DOUBLE REBATE FRAME DOUBLE REBATE FRAME
1.80 1.80 1.32 0.90 · EXHAUST FANS SHALL BE PROVIDED IN
ALL TOILETS.

· OPENINGS FOR AIR CONDITIONER /

0.45

0.45

0.45
DESERT COOLER SHALL BE KEPT EXACT

0.45
FG FG FG FG FG EXHAUST FAN
FG FG FG AT SITE IN CONSULTATION WITH
CONCERNED XEN, ELECT. DIVN.
SPACE SPACE SPACE 0.38 0.52 P.W.D.(B&R) BR.

0.46
1.54
0.46

0.50 0.46

1.70
FOR FOR

2.60
FOR
1.70

WINDOW WINDOW FIXED · ENTRY DOORS SHALL HAVE FLUSH &

AC AC AC WIREMESH SHUTTERS BOTH.
WIRE MESH
2.60

O O O O O
'X'
2.60

2.60
0.60
0.66

FG

2.15
0.57 0.67 0.57
0.57 0.67 0.57 0.57 0.75
1.06
0.90

0.90
AR. SANJEEV KUMAR
(CHIEF ARCHITECT)

W W-A W1 V
1.80X1.70 1.80X1.54 1.32X1.70 0.90X0.45
(EXTERNAL WINDOW) (LAB WINDOW) (EXTERNAL WINDOW) (TOILETS) AR. DEVENDER SINGH
(SENIOR ARCHITECT)

127 mm X 50 mm

SCHEDULE OF JOINERY
PRESSED STEEL BRICK MASONARY
DOUBLE REBATE FRAME OUTSIDE
AR. LALIT KUMAR VACANT
1 (ARCHITECT) (ASSTT. ARCHITECT)
2" THICK CEMENT PLASTER
WOODEN STYLE 3"X112" WOODEN BEED 12"X34" S.NO. TYPE SIZE CILL TOP REMARKS OFFICE OF THE
10 mm M.S.SQUARE BARS
WELDED TO M.S.FLAT @4C/C SHEET GLASS CHIEF ARCHITECT
D/G 3.76 X 2.60 SOLID FLUSH DOOR WITH
1 - 2.60 D=2.0 WIRE MESH SHUTTER HARYANA, CHANDIGARH
10 M.M. M.S. HORIZONTAL SQUARE
114"X4mm M.S.FLAT SOLID FLUSH DOOR WITH
WELDED TO PRESSED STEEL FRAME
BARS WELDED TO M.S.FLAT
2 D1/G1 1.80 X 2.60 - 2.60 D1=1.06 WIRE MESH SHUTTER
STANDARD HEALTH WELLNESS CENTRE
PRESSED STEEL FRAME 10 M.M. M.S.VERTICAL SQUARE BARS DESIGN-I WITHOUT LABOUR ROOM AND
50mm x 127mm
WELDED TO M.S.FLAT @ 4" C/C
3 D1 1.06 X 2.15 - 2.15 RESIDENCES
141"X4 M.M. M.S. FLAT WELDED TO
10 mm M.S.SQUARE BARS PRESSED STEEL FRAME 4 D2 0.90 X 2.15 - 2.15
WELDED TO M.S.FLAT @4C/C
WIRE MESH SHUTTER 5 W 1.80 X 1.70 0.90 2.60 TARSEM KUMAR (A.D.) SUBHASH (A.A.)
HOLD FAST
WOODEN BEED 12"X34" 6 W-A 1.80 X 1.54 1.06 2.60 DEALT BY:- CHECKED BY:-
PRESSED STEEL FRAME JOB NO SCALE
1
2" THICK CEMENT PLASTER 50mm x 127mm 7 W1 1.32 X 1.70 0.90 2.60 3152 NTS
INSIDE
TYPICAL DETAIL OF M.S GRILL 8 V 0.90 X 0.45 2.15 2.60 DRG.NO DATE
DEATIL AT- 'X' 4C NOV. 2024
(GOOD FOR CONSTRUCTION)
NOTE:- ALL DIMENSIONS ARE IN METERS DETAIL OF JOINERY
UNLESS OTHERWISE SPECIFIED