Scribd
Upload
39 views2 pages

MOLYKOTE - HP-500 - Grease 80-3085E-01

Uploaded by

Marcelino Quispe Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views2 pages

MOLYKOTE - HP-500 - Grease 80-3085E-01

Uploaded by

Marcelino Quispe Castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MOLYKOTE® HP-500 Grease

Fully fluorinated grease that provides extraordinary performance under extreme


conditions
Typical properties
Features & benefits Specification writers: These values are not intended for use in
preparing specifications. Please contact your local MOLYKOTE®
• Compatible with most plastics
sales representative prior to writing specifications on this product.
• Excellent stability at high temperatures
• Superior resistance to chemicals and solvents Standard(1) Test Unit Result
• Minimal deterioration due to oxidation; appropriate for Appearance White
long- term lubrication
JIS K 2220 Penetration (worked mm/10 280
• Low vapor pressure (base oil) 60 times)
NLGI class 2
Composition Service temperature ºC -20 to 200
range
• Perfluoropolyether
• Fluorinated polymer Density g/cm3 2.0
MIL-S-8660 Bleed (200ºC, 24 hours) % 0-4

Applications MIL-S-8660 Evaporation (200ºC, % 0-1


24 hours)
MOLYKOTE® HP-500 Grease can be used broadly under harsh
conditions, such as high temperatures, corrosive, solvents, MIL-S-8660 Evaporation (200ºC, % 0.8
1,000 hours)
liquefied natural gasses, high vacuum, etc. Can be used in
cleanroom equipment and semiconductor manufacturing ASTM Four ball weld load N 3,440
D2596 (1,500 rpm/1 minute)
equipment where the vaporization of the lubricating material is
undesirable. ASTM Four ball wear scar mm 0.9
D2266 (1,200 rpm, 392 N,
1 hour)
Description JIS K 2220 Low-temperature torque test (-20ºC)
MOLYKOTE® HP-500 Grease is a perfluoropolyether (PFPE)- Starting torque Ncm 34
based grease thickened with polytetrafluoroethylene (PTFE); it is Running torque Ncm 18
useful for reducing wear in many plastic-on-plastic applications.
JIS K 2220 Low-temperature torque test (-40ºC)
Starting torque Ncm Not
How to use measurable
Clean point of application. As is usual with lubricating greases, Running torque Ncm Not
apply or fill by means of a brush, spatula, or automatic lubrication measurable
device. Base oil vapor pressure Pa 1.33x10-6
20ºC
JIS: Japanese Industrial Standard. MIL: Military Specification and
(1)

Handling precautions Standards. ASTM: American Society for Testing and Materials.
Although MOLYKOTE® HP-500 Grease is highly chemically
stable, at temperatures in excess of 250ºC, the material will
gradually decompose and release toxic gases; be sure to have
adequate ventilation if you expect the material to decompose. Do PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE
not smoke cigarettes that are contaminated with this product. Be USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE
sure to wash hands thoroughly after use. HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
INFORMATION.
Usable life and storage
When stored, unopened, in a cool, dark place, this product has a
usable life of 36 months from the date of production.

Packaging
This product is available in 100 g and 500 g plastic cans.

DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 2002-2024 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 80-3085E-01 (01/24) AGP17374

You might also like