Previous Lectures: Geometric Design Controls

• Primary controls
1. Highway system and classification
2. Topography and environment
3. Traffic
• Dependent controls
1. Design speed
2. Design vehicle
3. Design driver
4. Level of service (capacity)
5. Access control and access management
6. Scope of improvement

8/31/2023 TE 5104: Lecture 1 2

 Concepts in Geometric Design

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 3

Concepts in Geometric Design
• Complete street concepts
• Context sensitive solutions
• Performance-based design
• Practical design
• Design matrix approach
• Safe system approach
• Travel time reliability approach
• Value engineering
• Designing of 3R projects
• Very low-volume local roads
• Performance based practical design approach
8/31/2023 TE 5104 Geometric Design of Transportation Facilities 4
 Complete streets concept

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 5

• Focuses on creating roadways and related
infrastructure by encouraging a safe, comfortable,
integrated transportation network for all users, travelers
regardless of age, ability, income, ethnicity, or mode
of transportation
• Accommodate their needs and expectations
• Each design is customized to the characteristics of bicyclists motorists
the area the street serves Complete
streets
• Typical elements of design in consideration: concept
• Sidewalks
• Bicycle lanes (or wide, paved shoulders)
• Shared-use paths
pedestrians
• Designated bus lanes transit
users
• Safe and accessible transit stops
• Frequent and safe crossings for pedestrians, including
median islands, accessible pedestrian signals, and curb
extensions

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 6

Sidewalks
• Frontage Zone
• Pedestrian Through Zone
• Street Furniture/ Curb Zone
• Enhancement/ Buffer Zone

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 7

Bicycle lanes
• Completely separated right-of-way designated for the exclusive use
of bicycles and may be pedestrians with minimized crossflows by
motorists

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 8

Shared bicycle lanes
• Path is shared with motor vehicles

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 9

Transit stops
• Design elements to
improve transit
operations or the transit
user experience includes
• Bus Pad
• Bench
• Transit Shelter
• Bicycle and Pedestrian
access
• Pedestrian-scale lighting
• Bus bulb
• Bus-only queuing space

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 10

Bus bulb

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 11

 As a highway design engineer, you are
entrusted to develop a section of National
Highway based on the Complete Street
Concept. Discuss your considerations.

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 12

Context sensitive solutions (CSS)
• Evolved from Context Sensitive Design (CSD)
• Can focus on to make the road infrastructure
design: environment
• Attractive
• Responsive to the local authorities and their interests
• Core principles
• Strive toward a shared stakeholder vision to provide a
basis for decisions CSS
• Demonstrate a comprehensive understanding of
contexts
• Foster continuing communication and collaboration to community
achieve consensus values

• Exercise flexibility and creativity to shape effective

transportation solutions, while preserving and
enhancing community and natural environments

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 13

Context sensitive solutions (CSS)
• Identify problems in functional or performance terms and arrive at
solutions that addresses them
• The design process presents a series of choice from which designer
choose an effective solution that often represents competing
interests of operational efficiency, cost, users and environmental
sensitivity

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 14

Example: Maryland Route 108
• Two lane major arterial providing principal access to and through Olney
area
• Land use includes both residential and commercial land uses
• Challenges:
• Traffic already exceeds capacity
• Future increase in traffic would lead to further congestion
• No opportunity to divert traffic to any other parallel arterials
• Primary transportation model will remain automobile
• Stakeholder’s concerns include:
• Preservation of natural and historic features (including large trees along the corridor,
split rail fencing, historic properties)
• Inclusion of provision for bicycles and pedestrians across and along the corridor
• Safety and access to businesses
• Appearance of the corridor (a desire for landscaping and other visual features)

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 15

 As a highway design engineer, you are entrusted
to develop a section of National Highway passing
through an industrial area. What Context
Sensitive Solutions you would like to explore?

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 16

Performance-based design
• Meeting geometric design criteria -> only
nominal safety and operational
performance Operational
performance
• Meeting explicit performance criteria ->
achieve substantial safety and operational
performance targets Performance
-based
design
Operational targets: HCM

Safety targets: HSM Safety

Performance performance
standards Operational targets: Indo-
HCM
Safety targets: IRC SP 044

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 17

 As a highway design engineer, you are entrusted
to develop a section of National Highway. How
would you like to adopt the Performance-Based
Design concept in your project?

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 18

Practical design
• Focuses on doing everything well instead of a few factors
• Establish reduced-cost scope and road geometry primarily based on
needs
• Only the most needed improvements were included in the projects
• A minor variation of practical design concept is Practical Solutions
where existing condition is considered as base design and project
improvements beyond the existing condition is considered as positive
outcome

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 19

As a highway design engineer, you are entrusted
to develop a section of MDR passing through an
area with many warehouses. Both long hauling
heavy vehicles and smaller delivery vehicles
accesses these warehouses. The through traffic
from this region is generally low. How would you
use this information for developing the Practical
Design concept?
8/31/2023 TE 5104 Geometric Design of Transportation Facilities 20
Design matrix approach
• It is an extension of practical design with three levels of design for
highway project:
• Basic design level
• Modified design level
• Full design level

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 21

Reading assignments
• NCHRP Report no. 480, Section H: Case Studies on Context Sensitive
Solutions
• NCHRP Synthesis 443, Appendices D, G and I: Case studies on
Practical Design
• https://www.fhwa.dot.gov/design/pbpd/case_studies.cfm
Case studies on Performance-based Practical Design

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 22

Questions & Exercises
• As a highway design engineer, you are entrusted to develop a section
of National Highway based on the Complete Street Concept. Discuss
your considerations.
• As a highway design engineer, you are entrusted to develop a section
of National Highway passing through an industrial area. What Context
Sensitive Solutions you would like to explore?
• As a highway design engineer, you are entrusted to develop a section
of National Highway. How would you like to adopt the Performance-
Based Design concept in your project?

8/31/2023 TE 5104 Geometric Design of Transportation Facilities 23