IONPURE ® LX-HI INSTANT HOT LX-HI Series Features

WATER SANITIZABLE CONTINUOUS • Hot water sanitizable at

185°F/85°C ± 5°C
ELECTRODEIONIZATION (CEDI) MODULES
• Continuous operation up to
IONPURE LX-HI MODULE 140°F (60°C)
• Patented technology for instant hot
Hot water sanitization has been shown to be more effective than chemical
water capability – no ramp
sanitization for controlling microbial growth, primarily in the pharmaceutical
up/down required
and biotechnology industries and other applications where chemical-free,
• Higher sanitization pressure
instant hot water sanitization is desired.
30 psi/2.0 bar
LX-HI modules are capable of continuous operation up to 140°F (60°C) • Double O-ring seal guarantees
allowing these modules to provide high quality water, in higher temperature leak-free operation
applications than typical CEDI, such as steam generation in power • Proven performance after
applications, without regeneration downtime. Ease of operation, maximum 150+ sanitizations
reliability and low operating costs are signature features of Ionpure modules. • Concentrate recirculation and
brine injection not required
• Wetted materials of construction
comply with FDA requirements
For additional information on our hot
H water sanitizable series of modules visit
our website at www.ionpure.com.

W
OPERATING ENVIRONMENT Feed Water Specifications
Installation should be indoors with no direct sunlight Feed Water Conductivity
< 40 μS/cm
and should have a maximum ambient room temperature Equivalent, including CO2 and Silica
of 113°F (45°C). Temperature 41 - 140° F (5 - 60° C)

Inlet Pressure ≤ 100psi (6.9 bar)

QUALITY ASSURANCE STANDARDS
Maximum Total Chlorine (as Cl2) < 0.02 ppm
CE marked for compliance with low voltage directive. Each Iron (as Fe) < 0.01 ppm
module is factory tested to meet strict industry standards
Manganese (as Mn) < 0.01 ppm
and is manufactured in an ISO 9001 and ISO 14000 quality
and environmental management system. Sulfide (S-) < 0.01 ppm

pH 4 – 11
Halal certified. All Ionpure modules are manufactured in
accordance with the Islamic Food and Nutrition Council of Total Hardness (as CaCO3) < 1.0 ppm

America standards (IFANCA), and will carry the Crescent M Dissolved Organics (TOC as C) < 0.5 ppm
Halal logo. Silica (SiO2) < 1.0 ppm

Physical Specifications Typical Module Performance

Dimensions
Operating Parameters
Item Number L H W
Typical Recovery 90 – 95%
LXM04HI-3 11.81” 23.84” 12.54”
Maximum Feed Pressure 100 psi (6.9 bar)
(300.0 mm) (605.5 mm) (318.5 mm)
DC Voltage* 0 – 600
LXM10HI-3 15.29” 23.84” 12.54”
(388.6 mm) (605.5 mm) (318.5 mm) DC Amperage 0 - 10
LXM18HI-3 19.91” 23.84” 12.54” Pressure Drop Range
(505.7 mm) (605.5 mm) (318.5 mm) 20 - 30 psi (1.4 - 2.1 bar)
at Nominal Flow
LXM24HI-3 23.38” 23.84” 12.54” Maximum Feed Temperature 140°F (60°C)
(593.9mm) (605.5 mm) (318.5 mm)
Sanitization Temperature
LXM30HI-3 27.42” 23.84” 12.54” 185°F (85°C)
at 30 psi (2.0 bar)
(696.5mm) (605.5 mm) (318.5 mm)

LXM45HI-3 35.72” 23.84” 12.54” Typical Product Water Quality

(907.3 mm) (605.5 mm) (318.5 mm)
Product Conductivity < 0.1 μS/cm
Silica (SiO2) Removal 90 – 99%, depending on feed water
Note: Actual performance may be determined using the IP-Pro projection software available from Ionpure.
* Voltage required depends on module size
ORDERING DETAILS

LX-HI Series Modules

Ordering Model Product Flow Product Flow Product Flow Shipping Weight ǂ Operating Weight
Part Number Number min. gpm (m3/hr) nominal gpm (m3/hr) max. gpm (m3/hr) lbs (kg) lbs (kg)
W3T17316 IP-LXM4HI-3 1.0 (0.22) 2.0 (0.44) 3.0 (0.67) 140 (64) 79 (36)
W3T17287 IP-LXM10HI-3 2.5 (0.55) 5.0 (1.1) 7.5 (1.65) 180 (82) 122 (55)
W3T17293 IP-LXM18HI-3 4.5 (1.1) 9.0 (2.0) 13.5 (3.1) 215 (98) 161 (73)
W3T17298 IP-LXM24HI-3 6.3 (1.4) 12.5 (2.8) 18.8 (4.2) 248 (113) 197 (89)
W3T17304 IP-LXM30HI-3 7.5 (1.65) 15.0 (3.3) 22.5 (5.11) 286 (130) 238 (108)
W3T226955 IP-LXM45HI-3 11.3 (2.55) 22.5 (5.1) 33.8 (7.67) 431 (196) 325 (148)
ǂ includes shipping crate

210 Sixth Avenue, Suite 3300, Pittsburgh, PA 15222

+1 (866) 926-8420 (toll-free) +1 (978) 614-7111 (toll) www.ionpure.com

Ionpure is a trademark of Evoqua, its subsidiaries or affiliates, in some countries.

All information presented herein is believed reliable and in accordance with accepted engineering practices. Evoqua makes
no warranties as to the completeness of this information. Users are responsible for evaluating individual product suitability
for specific applications. Evoqua assumes no liability whatsoever for any special, indirect or consequential damages arising
from the sale, resale or misuse of its products.

© 2018 Evoqua Water Technologies LLC Subject to change without notice ION-LXHI-DS-0818