GENERAL NOTES :

1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

ENGINEER REGISTRATION CARD:

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

DOCUMENTS SHEET 01
DRAWING NO : REVISION NO:

A00 -
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :
 GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

ENGINEER REGISTRATION CARD:

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

DOCUMENTS SHEET 02
DRAWING NO : REVISION NO:

A01 -
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :
DWG. DWG NAME SCALE DATE REV. REMARKS
NO NO.
GENERAL NOTES :
A00 PROJECT DOCUMENTS 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
A00 DOCUMENTS SHEET 01 N.T.S 09-07-2024 0 ----- OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
A01 DOCUMENTS SHEET 02 N.T.S 09-07-2024 0 ----- 2. DO NOT SCALE FROM THIS DRAWING.
A02 PERSPECTIVES N.T.S 09-07-2024 0 ----- 3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
A03 09-07-2024 ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
DCR COMPLIANCE N.T.S 0 -----
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
A04 AREA CALCULATION N.T.S 09-07-2024 0 ----- 4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
A 10SITE LAYOUT PLAN TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION
A10 SITE LAYOUT PLAN 1:150 09-07-2024 0 -----
A 100FLOORS PLANS
A100 GROUND FLOOR PLAN 1:100 09-07-2024 0 -----
A101 FIRST FLOOR PLAN 09-07-2024
02 ---- 04-09-2024
1:100 0 -----
A102 ROOF FLOOR PLAN 1:100 09-07-2024 0 ----- 01 ---- 12-05-2024
A103 TOP ROOF PLAN 1:100 09-07-2024 0 ----- REV. NO. DESCRIPTION Date
A 200ELEVATIONS MASTER DEVELOPER :
A200 ELEVATIONS 1&2 1:100 09-07-2024 0 -----
A201 ELEVATIONS 3&4 1:100 09-07-2024 0 -----
A 300SECTIONS
SUB DEVELOPER:
A300 SECTIONS A-A & B-B 1:100 09-07-2024 0 -----
A301 STAIR DETAILS 1:100 09-07-2024 0 ----- XXXX
A 400OTHER BUILDINGS DWG
A400 ELECTRIC ROOM DETAILS 1:100 09-07-2024 0 ----- OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
A401 BOUNDARY WALL PLAN 1:100 09-07-2024 0 ----- 2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
A402 BOUNDARY WALL ELEVATIONS 1:100 09-07-2024 0 ----- 5- FADIA MAHMOUD ALI
ESTDAMA CONSULTANT :
EST 01 ESTDAMA 1:150 09-07-2024 0 -----
ADIBC ANALYSIS
TASEES CONSULTING ENGINEERS
AC01 CODE ANALYSIS - CH1, CH3, CH4, CH5, CH6 AS SHOWN 09-07-2024 0 -----
ENGINEER REGISTRATION CARD:
AC02 CODE ANALYSIS - CH7, CH8, CH9, CH10 AS SHOWN 09-07-2024 0 -----
AC03 CODE ANALYSIS - CH10, CH12, CH24, CH31 AS SHOWN 09-07-2024 0 -----
1 PERSPECTIVE VIEW- 1
A02 SCALE NTS

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

DRAWING LIST AND PERSPECTIVES

DRAWING NO : REVISION NO:

A02 -
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :

3 PERSPECTIVE VIEW- 2 2 PERSPECTIVE VIEW- 3

A02 SCALE NTS A02 SCALE NTS
 GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
PLOT NO. 57 OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
E 252077.5400
47.20m E 252090.6950 2. DO NOT SCALE FROM THIS DRAWING.
N 2703319.4680 N 2703274.1000
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.

1.50m
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

PLOT NO. 56

PLOT NO. 60
47.30m
47.20m

1.50m 1.50m
ENGINEER REGISTRATION CARD:

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
2.90m
‫ومنطقة الخدمات‬

DRAWING TITLE :
2.90m

2.00m

DCR COMPLIANCE

E 252032.1610 E 252045.3160
DRAWING NO : REVISION NO:
N 2703306.3140 N 2703260.9350

A03 -
47.20m
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
1 SITE PLAN
PROJECT MEPS ID : DRAWING SIZE :
A03 SCALE NTS
B1N-2021-008300-P01-S05 A2
2665
450 545 215 245 215 125 420 450
(Li ght B ei ge Color)

A l um i num Louver Shade

OFFICIAL USE ONLY :

Residential Villa Residential VIlla POLYFLEX OR POLYTEX
SCREED TO FALL IN 1:90 SLOPE F .CIELING
BITUTEX & POLYFAB
POLYFOAM
RCC SLAB AS SCHEDULE
12 MM C/S PLASTER AND PAINT

XX sq.m 2,231.94sq.m
LOBBY

6 4

XX 0.43
6 3

6 2

6 2

6 1

F .CIELING F .CIELING

FX

DCR APPROVAL
5 1

H 90CM GLASS HANDRAIL

sq.m 976.81 sq.m

FX OP FX

XX
5 0

GLASS HANDRAIL
4 9

3
4 8

4 7

W01 W04
4 6

4 5

4 4

4 3

4 2

4 1

4 0

FX FX FX 3 9

sq.m sq.m
3 8

XX -
3 7

3 6

LIVING HALL LOBBY 3 5

SITING AREA
3 4

A1
3 3

3 2

3 1

3 0

SCALE NTS
2 9

2 8

F .CIELING F .CIELING

XX sq.m 1147.60 sq.m FX

FX
OP
FX
GLASS HANDRAIL
2 0

1 9

1 8

1 7

1 6

1 5

1 4

1 3
H 90CM GLASS HANDRAIL

A03
70.00 % 12.7%
1 2
W03
1 1

1 0

0 9

0 8

0 7

FX FX FX
0 6

0 5

LOBBY 0 3
0 4

DI NING
D1 A1
0 2

0 1

XX no. 04 no.
0 4

0 3

0 2

0 1

IMS
FLOOR FINISHES AS SCHEDULE TREAD -30 CM

no. no.
RISE -15.3125 CM

3 3
7 CM MIN. C / S MORTAR

RIGHT OF WAY
VILLA SECTION
10 CM THICK PCC WITH A-142 MESH
1000 G. POLYTHENE SHEET
WELL COMPACTED SOIL

18.00 m 16.25 m 2
2.00-1.50-1.50-1.50 m 2.90-1.50-1.50-1.50 m 1

0.30
A03 SCALE NTS
G+1+P
 W03 W03 W04 W04

W08

W08
W07

W07
D5 D5 D5

BATH STORE BATH TOILET

BEDROOM -4 OFFICE
BEDROOM -2 KITCHEN D5

H A3
DRS TOILET
BATH BATH

W08

W08
W07

W07
W03 W03 FB W04 W04
D5 D4 D4 D5 D4 D4 D5

D4 D4

GENERAL NOTES :
D4 D4

P A S S A G E W 120CM

P A S S A G E W 120CM
P A S S A G E W 120CM

P A S S A G E W 120CM
BEDROOM -1 MAID ROOM
BEDROOM -3 STUDY ROOM 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
DINING
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE

W04
W04
W03

W03
SITING AREA
A1 A1
A1 A1
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
A3

H 90CM GLASS HANDRAIL H 90CM GLASS HANDRAIL

FB
D5 D5 A4
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
BATH LAUNDRY
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
D5 D5 DRS BATH D5 PANTRY
A2 A2 A2 A2
D5 H

W06
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.

W06
W05
W05
STORE
H.W IRON

P A S S A G E W 140CM

P A S S A G E W 140CM
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT

P A S S A G E W 140CM

P A S S A G E W 140CM
W07 LIFT W07 W08 LIFT W08
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
D2 D2
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

W09

W09
+0.70m +0.70m
F.F.L. F.F.L.

D6 D6
W07 W07 W08 W08

H.W LOBBY dn

D5
LOBBY dn

W06

W06
W05

TOILET H.W H 90CM GLASS HANDRAIL

W05
02 ---- 04-09-2024
D5 D5 D5
TOILET H 90CM GLASS HANDRAIL
1 H.W TOILET 1 BATH DRS
A1 A301
A301

A1 A2 A2
LOBBY
D4 A3
01 ---- 12-05-2024
A3
A1

REV. NO. DESCRIPTION Date

D4
WOMEN HALL

W04

W04
W03

W03
LIVING HALL SITTING AREA

MASTER DEVELOPER :
ENTRANCE HALL

D1
D4
W02 W02 W02 W01 W02

W08

W08
W07

W07
A1
D3
MAIN ENTRANCE
H.W DRS

SUB DEVELOPER:
A3
A3

D5 D5 BEDROOM -2 MASTER BEDROOM

XXXX
LIVING HALL ARABIC MAJLIS
TOILET

BATH
VOID

W08

W08
W07

W07
W04 W04

OWNER:
W03 W03

1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI

1 GROUND FLOOR PLAN 2 FIRST FLOOR PLAN 5- FADIA MAHMOUD ALI

CONSULTANT :
A04 SCALE NTS A04 SCALE NTS
TASEES CONSULTING ENGINEERS
ENGINEER REGISTRATION CARD:

E SL
OP OP
SL E

PROJECT NAME :

RESIDENTIAL VILLA
SL

E
OP
OP

SL
E

ZONE :
D4 D4

(Light Beige Color)

Aluminum Louver Shade
KHALIFA CITY
P A S S A G E W 140CM

P A S S A G E W 140CM

LIFT
ELE. ROOM SECTOR : PLOT :
W09

W09

D6 SW1 58
LOBBY
dn

H 90CM GLASS HANDRAIL

3
PROJECT DESCRIPTION :
D1
D3 A301

‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬

‫ومنطقة الخدمات‬
SL
E
OP

OP
SL

DRAWING TITLE :

E 252032.1610 AREA CALCULATION

N 2703306.3140
DRAWING NO : REVISION NO:

SL
OP
E SL
OP
E A04 -
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
3 ROOF PLAN 4 TOP ROOF PLAN 5 ELECTRICAL ROOM PLAN
PROJECT MEPS ID : DRAWING SIZE :
A04 SCALE NTS A04 SCALE NTS A04 SCALE NTS
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :

Determining Built Up Area Determining Coverage Area

Built-up area (BUA): Total constructed area in a building or structure measured The Coverage ratio on the ground represents the ratio of the total area of the
from the external walls of the building, inclusive of balconies, terraces and land projection For all structures on the plot of land, to the net land area,
other projections, as well as any other covered spaces such as covered Typically expressed in percentage form. The bottom is supposed to be
parking structures, circulation corridors, loading/unloading bays, basements, collected Flooring to all floors and allotments, incl., Vehicle Garage and
service floors, indoor swimming pools and any other permanent structures on Porches Covered and roofed arcades, with a view to accounting for plot
the plot. coverage. Exceptions The following structures or buildings from the calculation:
 ‫مخطط اﻷرض المعتمد‬

GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

PLOT NO. 57
E 252077.5400
47.20m E 252090.6950 02 ---- 04-09-2024
N 2703319.4680 N 2703274.1000

01 ---- 12-05-2024

1.50m

1.51m
REV. NO. DESCRIPTION Date

1.93m
1.88m
24.50m 1.50m
MASTER DEVELOPER :

(‫تتطلب‬ ‫موافقة المداخل )إن‬

SUB DEVELOPER:
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI

(Light Beige Color)

5- FADIA MAHMOUD ALI
Aluminum Louver Shade

CONSULTANT :
24.49m

TASEES CONSULTING ENGINEERS

ENGINEER REGISTRATION CARD:

24.48m 1.80m

PLOT NO. 56

PLOT NO. 60
47.30m
47.20m
PROJECT NAME :

RESIDENTIAL VILLA
24.47m 1.50m

ZONE :

KHALIFA CITY

4.62m
SECTOR : PLOT :

SW1 58

3.00m
6.00m 4.00m

17.82m
PROJECT DESCRIPTION :

17.32m
3.00m
NUMBER OF RESIDENTIAL UNITS = 01 ‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬
MAXIMUM HEIGHT = 15.90 M

3.00m
ELECTRICAL LOADS = 175.00 kw DRAWING TITLE :

LEGEND: SITE LAYOUT

250
3.00m

RATIO OF VILLA
250

NO. BUILDING NAME FLOOR AREA NO. OF FLOOR

GATE LEVEL

GROUND FLOOR ELE. ROOF

DRAWING NO : REVISION NO:
Plot Area 2,231.94 m²
E 252032.1610 E 252045.3160
A10 -
01 Proposed Private Villa 976.81 m² 03 N 2703306.3140
PEDESTRIAN ACCESS

N 2703260.9350
21.62m 4.00m 9.03m 1.50m 11.05m

02 Proposed Electrical Room 8.41 m² 01 47.20m SUBMISSION DATE : SCALE :

03

04
Proposed Main Gate

Proposed Pedestrian Gate

01

01
VEHICULAR ACCESS 09/07/2024 AS SHOWN
(Benchmark)±0.00
05 Proposed Decorated Boundary wall 47.20 lm (Sea Level) 121.83 PROJECT MEPS ID : DRAWING SIZE :
06 Proposed Un Decorated Boundary wall 141.70 lm B1N-2021-008300-P01-S05 A2
07 Proposed Parking 04

08 Proposed Pasco 8 cm Thick As Shown OFFICIAL USE ONLY :

09 Proposed Pasco 6 cm Thick As Shown

10 Proposed Green Area (By Owner) As Shown
Plot Coverage 44.00 %

VILLA GROUND FLOOR AREA = 455.00 sqm

VILLA FIRST FLOOR AREA = 455.00 sqm
ROOF FLOOR AREA
ELE. ROOM AREA
= 58.00 sqm
= 8.41 sqm
1 SITE LAYOUT
A10 SCALE NTS
 2030
605 160 500 160 605

GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION
W03 W03

200 455 455 200

W07

W07
200

200
D5 D5
FLOOR FLOOR 02 ---- 04-09-2024
FLOOR
BATH AREA

NATURAL
AREA

NATURAL
FLOOR
STORE
LIGHTING (Min.8%) LIGHTING (Min.8%)

01 ---- 12-05-2024
AREA AREA
NATURAL NATURAL
NATURAL VENTILATION (Min.4%) VENTILATION (Min.4%) NATURAL
LIGHTING (Min.8%) LIGHTING (Min.8%)

NATURAL NATURAL

450

450
VENTILATION (Min.4%) VENTILATION (Min.4%)

BEDROOM -2 KITCHEN

420

420
FLOOR FLOOR
REV. NO. DESCRIPTION Date
AREA

NATURAL H
AREA

NATURAL
200
MASTER DEVELOPER :
LIGHTING (Min.8%) LIGHTING (Min.8%)

NATURAL NATURAL
VENTILATION (Min.4%) VENTILATION (Min.4%)

BATH BATH

200

200
W07

W07
200
W03 W03 FB
D5 D4 D4 D5

455
D4 780 D4
455 SUB DEVELOPER:
XXXX
FLOOR (LI VI NG HALL & ENTRANCE
FLOOR HA LL & DI NINGAND FLOOR
AREA AREA S TA IRCA SE)
AREA

NATURAL NATURAL NATURAL

G E W 120CM

P A S S A G E W 120CM
LIGHTING (Min.8%) LIGHTING (Min.8%) LIGHTING (Min.8%)
NATURAL
NATURAL NATURAL
VENTILATION (Min.4%) VENTILATION (Min.4%) VENTILATION (Min.4%)
420

420
400

400
BEDROOM -1 MAID ROOM
DINING OWNER:
W03

W03
P A S S A525

525

525
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
A1 A1
5- FADIA MAHMOUD ALI
120 H 90CM GLASS HANDRAIL 120
FLOOR FLOOR CONSULTANT :
125

125
AREA AREA

NATURAL
D5 D5 NATURAL

TASEES CONSULTING ENGINEERS

LIGHTING (Min.8%) LIGHTING (Min.8%)

NATURAL NATURAL
VENTILATION (Min.4%) VENTILATION (Min.4%)

BATH D5 D5 LAUNDRY
FLOOR
A2 A2 FLOOR
320

320
AREA AREA

NATURAL NATURAL
LIGHTING (Min.8%) LIGHTING (Min.8%)

W05
W05

ENGINEER REGISTRATION CARD:

NATURAL NATURAL
215

215
VENTILATION (Min.4%) VENTILATION (Min.4%)

205

205
H.W 500 IRON

P A S S A G E W 140CM

P A S S A G E W 140CM
300 200 200 300
180

W07 LIFT W07

500

200
D2 D2
2665

2665
245

245
+0.70m +0.70m
F.F.L. F.F.L.

D6
W07 W07
800

655
FLOOR (LI VI NG HALL & ENTRANCE

PROJECT NAME :
HA LL & DI NINGAND
AREA S TA IRCA SE)

NATURAL
LIGHTING (Min.8%)

NATURAL
VENTILATION (Min.4%)

H.W 290
RESIDENTIAL VILLA
FLOOR FLOOR
AREA AREA

NATURAL NATURAL
155

FLOOR FLOOR

LOBBY LIGHTING (Min.8%) LIGHTING (Min.8%)

215

215
AREA AREA

D5 dn NATURAL NATURAL

205

205
NATURAL NATURAL
LIGHTING (Min.8%) LIGHTING (Min.8%) VENTILATION (Min.4%) VENTILATION (Min.4%)

W05
W05

NATURAL
VENTILATION (Min.4%)
NATURAL
VENTILATION (Min.4%) TOILET H.W
D5
TOILET H 90CM GLASS HANDRAIL
320

200 300
A1
1
A301
ZONE :

KHALIFA CITY
A1
145

LOBBY

125
200 290 D4
FLOOR
AREA

NATURAL
LIGHTING (Min.8%)

SECTOR : PLOT :
NATURAL
VENTILATION (Min.4%)

595 A1

WOMEN HALL
FLOOR (LI VI NG HALL & ENTRANCE

SW1 58
545

545
545

HA LL & DI NINGAND
AREA S TA IRCA SE)

NATURAL
525
W03

W03
LIGHTING (Min.8%)

NATURAL
VENTILATION (Min.4%)
400

PROJECT DESCRIPTION :
ENTRANCE HALL
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
470 825 ‫ومنطقة الخدمات‬
D1

DRAWING TITLE :
840

200
W02 W02
W07

W07
A1

GROUND FLOOR PLAN

D3
MAIN ENTRANCE

200
FLOOR (LI VI NG HALL & ENTRANCE FLOOR A3 H.W
AREA
HA LL & DI NINGAND
S TA IRCA SE) AREA FLOOR
AREA
NATURAL NATURAL
LIGHTING (Min.8%) LIGHTING (Min.8%) NATURAL
430

LIGHTING (Min.8%)
NATURAL NATURAL
VENTILATION (Min.4%) VENTILATION (Min.4%) NATURAL
VENTILATION (Min.4%)

DRAWING NO : REVISION NO:

440
450

450
D5
420

LIVING HALL ARABIC MAJLIS

TOILET
FLOOR
AREA

NATURAL
LIGHTING (Min.8%)
A100 -
NATURAL
VENTILATION (Min.4%)

675 600 455 200

W07

W07
200
SUBMISSION DATE : SCALE :

AS SHOWN
W03 W03

09/07/2024
PROJECT MEPS ID : DRAWING SIZE :

SYMBOL DESCRIPTION B1N-2021-008300-P01-S05 A2

SMOKE DETECTOR
OFFICIAL USE ONLY :
H HEAT DETECTOR

FIRE EXTINGUISHER

GROUND FLOOR PLAN

FB FIRE BLANKET
1 605 160 500 160 605
A100 SCALE 1:100 2030

AREA = 455 SQ.M

2 HOURS FIRE RATE

1 HOURS FIRE RATE

 GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2030 2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
605 160 500 160 605
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
W04 W04
MASTER DEVELOPER :

W08

W08
200 455 455 D5 200

200

200
BATH TOILET
FLOOR FLOOR
AREA AREA

NATURAL NATURAL

BEDROOM -4 OFFICE
L IG HTING (Min .8%) L IG HTING (Min .8%)

NATURAL NATURAL

SUB DEVELOPER:
450

450
V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)

420

420
D5

XXXX
FLOOR FLOOR
AREA AREA
FLOOR FLOOR
AREA AREA NATURAL
NATURAL

A3
L IG HTING (Min .8%) L IG HTING (Min .8%)
NATURAL NATURAL
NATURAL L IG HTING (Min .8%) L IG HTING (Min .8%) NATURAL
V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)
NATURAL NATURAL

DRS TOILET

200
V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)

200
W08

W08
200 200
D4
W04 W04
D4 D5 OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
455
D4
120 780 120
D4
455 2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

P A S S A G E W 120CM

P A S S A G E W 120CM
BEDROOM -3
FLOOR (LI VI NG HALL & SI TI NG A REA
AREA
A ND S TA IRCASE)

STUDY ROOM CONSULTANT :

420

420
400

400

400
NATURAL
L IG HTING (Min .8%)

TASEES CONSULTING ENGINEERS

NATURAL
V ENTILA TION (Min.4%)

W04
W04

525
FLOOR FLOOR
AREA AREA

NATURAL NATURAL

SITING AREA
L IG HTING (Min .8%) L IG HTING (Min .8%)

A1 A1
NATURAL NATURAL
V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)

A3 ENGINEER REGISTRATION CARD:

H 90CM GLASS HANDRAIL

530
FB
125

125
300 210 A4 FLOOR
AREA

NATURAL
L IG HTING (Min .8%)

320
NATURAL
V ENTILA TION (Min.4%)

DRS BATH D5 PANTRY

FLOOR

A2 A2 AREA
320

320
D5
NATURAL
L IG HTING (Min .8%)
H
W06

W06
NATURAL
V ENTILA TION (Min.4%)
215

215
STORE

205
FLOOR FLOOR
AREA AREA
500

P A S S A G E W 140CM

P A S S A G E W 140CM
NATURAL NATURAL
L IG HTING (Min .8%) L IG HTING (Min .8%)

NATURAL
V ENTILA TION (Min.4%)
NATURAL
V ENTILA TION (Min.4%)
320 180
180

LIFT
PROJECT NAME :
W08 W08

510

200
RESIDENTIAL VILLA
2665

2665
245

245
W09

W09
W08
D6
W08 ZONE :
655

655
FLOOR
AREA

NATURAL
FLOOR
AREA

NATURAL LOBBY dn
FLOOR
AREA

NATURAL
FLOOR
AREA

NATURAL
KHALIFA CITY
215

215
L IG HTING (Min .8%) L IG HTING (Min .8%) L IG HTING (Min .8%) L IG HTING (Min .8%)

NATURAL NATURAL NATURAL NATURAL

V ENTILA TION (Min.4%) V ENTILA TION (Min.4%) V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)
W06

W06
H 90CM GLASS HANDRAIL
FLOOR (LI VI NG HALL & SI TI NG A REA
A ND S TA IRCASE)
AREA
320

SECTOR : PLOT :
NATURAL

D5
L IG HTING (Min .8%)
800 D5
320

320
NATURAL
V ENTILA TION (Min.4%)

H.W TOILET 1 BATH DRS

320
A301

300 210
A2 A2 SW1 58
210 300
A3

A3 PROJECT DESCRIPTION :
585
D4
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬
545

545
525
W04

W04
LIVING HALL SITTING AREA

420 DRAWING TITLE :

FLOOR (LI VI NG HALL & SI TI NG A REA FLOOR
A ND S TA IRCASE)
AREA AREA

FIRST FLOOR PLAN

NATURAL NATURAL
L IG HTING (Min .8%) L IG HTING (Min .8%)

NATURAL NATURAL
V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)

1385

200
D4 DRAWING NO : REVISION NO:
FLOOR W02 W01 W02
W08

W08
AREA

840
NATURAL

A101 -
L IG HTING (Min .8%)

NATURAL
V ENTILA TION (Min.4%) FLOOR FLOOR

DRS
AREA AREA

NATURAL NATURAL
L IG HTING (Min .8%) L IG HTING (Min .8%)
200

NATURAL NATURAL
A3 V ENTILA TION (Min.4%) V ENTILA TION (Min.4%)

SUBMISSION DATE : SCALE :

450

450
420

420

D5 BEDROOM -2 MASTER BEDROOM

FLOOR
AREA

AS SHOWN
NATURAL
L IG HTING (Min .8%)

09/07/2024
NATURAL
V ENTILA TION (Min.4%)

BATH
200

200 455
VOID 675
W08

W08

PROJECT MEPS ID : DRAWING SIZE :

W04 W04

SYMBOL DESCRIPTION B1N-2021-008300-P01-S05 A2

SMOKE DETECTOR
OFFICIAL USE ONLY :
H HEAT DETECTOR

FIRE EXTINGUISHER

FIRST FLOOR PLAN

FB FIRE BLANKET
1
A101 SCALE 1:100
605 160 500 160 605
2030
AREA = 455 SQ.M
2 HOURS FIRE RATE

1 HOURS FIRE RATE

 2030
605 160 500 160 605

GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
E SL
OP OP
450
SL E 01 ---- 12-05-2024

450
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX
420

420
OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI

SL

E
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI

OP
OP
5- FADIA MAHMOUD ALI

SL
E
CONSULTANT :
125

125
D4 D4 TASEES CONSULTING ENGINEERS
ENGINEER REGISTRATION CARD:
215

215
500

P A S S A G E W 140CM

P A S S A G E W 140CM
180

LIFT

500

200
2665

2665
245

245
W09

W09
D6
PROJECT NAME :
655

655
LOBBY
dn RESIDENTIAL VILLA
215

215
FLOOR
AREA

H 90CM GLASS HANDRAIL NATURAL

LIGHTING (Min.8%)

ZONE :
NATURAL

800 VENTILATION (Min.4%)

3
D3 A301

KHALIFA CITY
SECTOR : PLOT :

SL
E
OP

SW1 58

OP
SL

E
545

545
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

ROOF FLOOR PLAN

DRAWING NO : REVISION NO:
450

450
SL
OP E A102 -
OP
E SL
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :

1 ROOF FLOOR PLAN

A102 SCALE 1:100 605 160 500 160 605
AREA = 58.40 SQ.M 2030

SERVICES AREA = XXXXX SQ.M

RATIO TO VILLA FIRST FLOOR ROOF = 12.83 %
 2030
605 160 500 160 605

GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

SL 02 ---- 04-09-2024
E OP
OP E
SL 01 ---- 12-05-2024
450

450
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX
420

420
OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI

SL
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI

E
OP
OP
5- FADIA MAHMOUD ALI

SL
E
CONSULTANT :
125

125
TASEES CONSULTING ENGINEERS
800
ENGINEER REGISTRATION CARD:
215

215
(Light Beige Color)
Aluminum Louver Shade

SL
OP
2665

2665
E
245

245
655

PROJECT NAME :

RESIDENTIAL VILLA
215

215
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58

SL
E
OP

OP
SL

E
545

545
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

TOP ROOF PLAN

DRAWING NO : REVISION NO:

A103 -
450

450
SL
OP PE
E S LO
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :

1 TOP ROOF PLAN

A103 SCALE 1:100
605 160 500 160 605
2030
 FINISHING
01 - MARBLE STAIRCASE
2030 02 - STEEL DOOR WITH GLASS (BROWN COLOR)
605 160 500 160
(Light Beige Color)
605 03 - ALUMINUM WINDOWS
Aluminum Louver Shade 04 - SPOT LIGHT
05 - TRIANGLE CUT ALUMINUM SECTION IN WOODEN EFFECT
06 - BIEGE PAINT
07 - LIGHT GRAY PAINT
08 - GRAY PAINT
09 - HIDDEN LIGHT
GENERAL NOTES :
10 - PLANT 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
11 - HANDRAIL OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
12 - MARBLE RAMP ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

FX FX FX FX
02 ---- 04-09-2024
FX OP FX OP OP FX OP FX
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :
FX FX
FX FX FX FX FX FX

SUB DEVELOPER:
FX FX

FX FX

XXXX
FX FX

OWNER:
FX FX FX FX
OP OP

1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI
FX FX FX FX FX FX

CONSULTANT :

TASEES CONSULTING ENGINEERS

01

02

03

04

ENGINEER REGISTRATION CARD:

1 ELEVATION 1
A200SCALE 1:100

PROJECT NAME :

2030
RESIDENTIAL VILLA
605 160 500
(Light Beige Color)
160 605
Aluminum Louver Shade ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

ELEVATION 1&2
DRAWING NO : REVISION NO:
FX FX FX FX

FX OP FX FX OP FX FX OP FX FX OP FX

A200 -

FX FX FX FX FX FX FX FX FX FX FX FX
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :

FX FX FX FX
B1N-2021-008300-P01-S05 A2
FX FX FX FX FX FX FX FX
OP OP OP OP

OFFICIAL USE ONLY :

FX FX FX FX FX FX FX FX FX FX FX FX

2 ELEVATION 2
A200SCALE 1:100
 FINISHING
01 - MARBLE STAIRCASE
02 - STEEL DOOR WITH GLASS (BROWN COLOR)
03 - ALUMINUM WINDOWS
04 - SPOT LIGHT
05 - TRIANGLE CUT ALUMINUM SECTION IN WOODEN EFFECT
06 - BIEGE PAINT
07 - LIGHT GRAY PAINT
08 - GRAY PAINT
09 - HIDDEN LIGHT
GENERAL NOTES :
2665 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
10 - PLANT
04 450 545 215 245 215
(Light Beige Color)
125 420 450
11 - HANDRAIL OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
Aluminum Louver Shade
12 - MARBLE RAMP
03 2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
02 ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
01 RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
FX TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
OP
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

ELEVATION
02 ---- 04-09-2024
FX

FX
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
FX

FX FX FX FX
FX FX FX FX

FX OP FX
OP
FX OP FX
MASTER DEVELOPER :
04 03 02 01 OP OP OP OP OP OP

FX FX FX

SUB DEVELOPER:
FX FX FX FX FX FX FX FX FX FX

FX
XXXX
FX

OWNER:
FX FX FX FX FX FX FX FX
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
FX
OP
FX FX
OP
FX 2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
OP OP OP OP OP OP
5- FADIA MAHMOUD ALI

CONSULTANT :
FX FX FX FX FX FX FX FX FX FX FX FX

TASEES CONSULTING ENGINEERS

TOP VIEW ENGINEER REGISTRATION CARD:

1 DETAIL D01 1 ELEVATION 3

A201 SCALE 1:30 A201 SCALE 1:100

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :
2665
450 420 125 215 245 215
(Light Beige Color)
545 450 KHALIFA CITY
Aluminum Louver Shade

SECTOR : PLOT :
03
03 SW1 58
02
FX
PROJECT DESCRIPTION :
01 OP
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :
ELEVATION 3&4
FX

ELEVATION HANDRAIL ELEVATIONS

FX

FX

FX FX
FX FX FX FX
FX FX
DRAWING NO : REVISION NO:
FX OP FX
OP
FX OP FX

A201 -
OP OP OP OP OP OP

FX FX FX
SUBMISSION DATE : SCALE :
FX FX FX FX FX FX FX FX FX FX

09/07/2024 AS SHOWN
FX

FX

PROJECT MEPS ID : DRAWING SIZE :

01 02 03 04
FX FX FX FX FX FX FX FX B1N-2021-008300-P01-S05 A2
FX FX FX FX
OP OP

OFFICIAL USE ONLY :

OP OP OP OP OP OP

FX FX FX FX FX FX FX FX FX FX FX FX

TOP VIEW
2 DETAIL D02 2 ELEVATION 4
A201 SCALE 1:30 A201 SCALE 1:100
 2030
605 160 500 160 605
(Light Beige Color)
Aluminum Louver Shade

04

03

02
GENERAL NOTES :
01
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
POLYFLEX OR POLYTEX ARCHITECT / ENGINEER.
SCREED TO FALL IN 1:90 SLOPE 2. DO NOT SCALE FROM THIS DRAWING.
BITUTEX & POLYFAB
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
POLYFOAM
RCC SLAB AS SCHEDULE ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
12 MM C/S PLASTER AND PAINT RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

AC UNIT

AC UNIT

AC UNIT

AC UNIT
D3

1 DETAIL D01 F.CIELING F.CIELING F.CIELING 02 ---- 04-09-2024

A300 SCALE 1:50 01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
W04 W04
MASTER DEVELOPER :

LIVING HALL SITING AREA

A3 A2 A2 A1
SUB DEVELOPER:

F.CIELING F.CIELING
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
W03 12

11
W03 5- FADIA MAHMOUD ALI
10

CONSULTANT :
09

08

07

06

05

LIVING HALL LOBBY WOMEN HALL

TASEES CONSULTING ENGINEERS
04

03

A1 D6 02

01
A1

ENGINEER REGISTRATION CARD:

DETAIL D02
FLOOR FINISHES AS SCHEDULE
2 1 SECTION A-A 7 CM MIN. C / S MORTAR
10 CM THICK PCC WITH A-142 MESH
A300 SCALE 1:50 A300 SCALE 1:100 1000 G. POLYTHENE SHEET
WELL COMPACTED SOIL

PROJECT NAME :

RESIDENTIAL VILLA
2665
450 545 215 245 215 125 420 450
(Light Beige Color)
ZONE :
Aluminum Louver Shade

KHALIFA CITY
SECTOR : PLOT :
POLYFLEX OR POLYTEX
SCREED TO FALL IN 1:90 SLOPE
F.CIELING
SW1 58
BITUTEX & POLYFAB
POLYFOAM
RCC SLAB AS SCHEDULE PROJECT DESCRIPTION :
12 MM C/S PLASTER AND PAINT
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬
LOBBY
DRAWING TITLE :
64

63

62
SECTION A-A & SECTION B-B
DETAIL D03 AND DETAILS
62

61

F.CIELING F.CIELING
3 FX

SCALE 1:50 DRAWING NO : REVISION NO:

A300
51

H 90CM GLASS HANDRAIL

FX OP FX
50

GLASS HANDRAIL
49

48

A300 -
47

W01 W04
46

45

44

43

42

41

40

FX FX FX 39

SUBMISSION DATE : SCALE :

38

37

36

LIVING HALL LOBBY 34

35
SITING AREA

AS SHOWN
33
A1

09/07/2024
32

31

30

29

28

F.CIELING F.CIELING

PROJECT MEPS ID : DRAWING SIZE :

A2
FX

B1N-2021-008300-P01-S05
20

19

H 90CM GLASS HANDRAIL

GLASS HANDRAIL
18

FX FX 17
OP
16

15

14

13

12
W03
11

08
09
10

OFFICIAL USE ONLY :

07
FX FX FX
06

05

LOBBY 03
04
DINING
D1 A1
02

01

04

03

02

01

IMS
FLOOR FINISHES AS SCHEDULE TREAD -30 CM
7 CM MIN. C / S MORTAR RISE -15.3125 CM
10 CM THICK PCC WITH A-142 MESH
1000 G. POLYTHENE SHEET
WELL COMPACTED SOIL

4 DETAIL D04 2 SECTION B-B

A300 SCALE 1:50 A300 SCALE 1:100
 10mm THICK
CERAMIC TILES
RISER

215 245 215 125 10 mm THICK LIGHT

EMPERADOR
(Light Beige Color)
Aluminum Louver Shade MARBLE THREAD
WITH CHAMFERED
EDGE GENERAL NOTES :
500 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
H 90CM GLASS HANDRAIL OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
F.CIELING
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
40 X 70mm WOODEN
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
HANDRAIL FIXED TO
BALUSTRADE RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
215

215
500 TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
P A S S A G E W 140CM

P A S S A G E W 140CM
180
LOBBY PART TOP VIEW 5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION
460

460
LIFT
64

DETAIL D01
63
510

5
62

200
62

61

F.CIELING
02 ---- 04-09-2024
245

245
51
A301 SCALE 1:30 01 ---- 12-05-2024
50

H 90CM GLASS HANDRAIL

GLASS HANDRAIL
49

48

REV. NO. DESCRIPTION Date

47

46

45

44

43

MASTER DEVELOPER :
42

41

40

LOBBY
39

38

dn 36
37

LOBBY 34
35

32
33
A1
H 90CM GLASS HANDRAIL
500 31

30

29

SUB DEVELOPER:
28

F.CIELING

20
XXXX
19
H 90CM GLASS HANDRAIL
GLASS HANDRAIL
18

17

16

15

14

OWNER:
13

12

1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
11

10
07
09

08

05
06
07
06
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
LOBBY 05
5- FADIA MAHMOUD ALI
04

03

02
A1
04
01

STAIRCASE 02
03 CONSULTANT :

1 GROUND FLOOR PLAN IMS 01 TASEES CONSULTING ENGINEERS

TREAD -30 CM FLOOR FINISHES AS SCHEDULE
RISE -15.3125 CM 7 CM MIN. C / S MORTAR
A301SCALE 1:30 10 CM THICK PCC WITH A-142 MESH ENGINEER REGISTRATION CARD:
1000 G. POLYTHENE SHEET
WELL COMPACTED SOIL

4 SECTION B-B 6 DETAIL D02

A301 SCALE 1:30 A301 SCALE 1:30

PROJECT NAME :

RESIDENTIAL VILLA
NOSING TILE
ZONE :
10 mm THICK LIGHT MARBLE
THREAD WITH CHAMFERED KHALIFA CITY
EDGE
20 mm THICK SETTING MORTAR
SECTOR : PLOT :
10mm THICK CERAMIC TILES RISER
SW1 58
500 PROJECT DESCRIPTION :
500
H 90CM GLASS HANDRAIL ‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

STAIR DETAIL
215

215
500
7 DETAIL D03
215

215

P A S S A G E W 140CM

P A S S A G E W 140CM
500
P A S S A G E W 140CM

P A S S A G E W 140CM

DRAWING NO : REVISION NO:

180
A301SCALE 1:30
460

460
180 LIFT
A301 -
460

460

500

200

LIFT
510

200

245

245
SUBMISSION DATE : SCALE :
245

245

09/07/2024 AS SHOWN
LOBBY PROJECT MEPS ID :
dn DRAWING SIZE :
LOBBY
dn
H 90CM GLASS HANDRAIL
500
B1N-2021-008300-P01-S05 A2
H 90CM GLASS HANDRAIL
500 40 X 70mm WOODEN BALUSTRADE
HANDRAIL FIXED TO OFFICIAL USE ONLY :
STEEL TOP
FRAME
CAST IRON
BALUSTRADE

STAIRCASE STAIRCASE
2 FIRST FLOOR PLAN 3 ROOF FLOOR PLAN 8 DETAIL D04
A301SCALE 1:30 A301SCALE 1:30 A301SCALE 1:30
 FINISHING
01 - BIEGE PAINT
02 - STEEL DOOR (BROWN COLOR)
03 - HIDDEN LIGHT
04 - ALUMINUM LOUVER DOOR (LIGHT BEIGE COLOR)

GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
250 250
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.

290

290
ELE. ROOM 3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT

250

250
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
D1 4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION
E 252032.1610 E 252032.1610
N 2703306.3140 N 2703306.3140
290 290

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

1 GROUND FLOOR PLAN 2 ROOF PLAN

SUB DEVELOPER:
A400SCALE 1:100 A400SCALE 1:100
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

PLOT LIMIT
PLOT LIMIT
290
290 290 PLOT LIMIT ENGINEER REGISTRATION CARD:
PLOT LIMIT
290

PROJECT NAME :
H
RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
3 ELEVATION -01 4 ELEVATION -02 5 ELEVATION -03 6 ELEVATION -04
A400SCALE 1:100 A400SCALE 1:100 A400SCALE 1:100 A400SCALE 1:100 PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

ELECTRICAL ROOM DETAILS

290 290 DRAWING NO : REVISION NO:
PLOT LIMIT
PLOT LIMIT
A400 -
SUBMISSION DATE : SCALE :

09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :
H ELE. RM
ELE. RM

7 SECTION F-F 8 SECTION G-G

A400SCALE 1:100 A400SCALE 1:100
 UN DECORATED BOUNDARY WALL
GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
PLOT NO. 57 OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
4720 ARCHITECT / ENGINEER.
E 252077.5400 E 252090.6950
2. DO NOT SCALE FROM THIS DRAWING.
420 430 430 430 430 430 430 430 430 430 430
N 2703319.4680 N 2703274.1000 3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

430
430
02 ---- 04-09-2024
01 ---- 12-05-2024

430
430

REV. NO. DESCRIPTION Date

MASTER DEVELOPER :

430
430

SUB DEVELOPER:
XXXX
UN DECORATED BOUNDARY WALL

OWNER:

UN DECORATED BOUNDARY WALL

1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI

430
430

2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

430
430

ENGINEER REGISTRATION CARD:

PLOT NO. 56

PLOT NO. 60
4730
4720

430
430

PROJECT NAME :

RESIDENTIAL VILLA

430
430

ZONE :

KHALIFA CITY

430
430

SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :

430
430

‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬

‫ومنطقة الخدمات‬

DRAWING TITLE :
BOUNDARY WALL

430
PLANS
430

DRAWING NO : REVISION NO:

A401 -
250

430
420

ELE. ROOM SUBMISSION DATE : SCALE :

250

GATE LEVEL

D1

09/07/2024 AS SHOWN
E 252032.1610
420 420 420 420 457 450 853
PEDESTRIAN ACCESS
440 420 420
E 252045.3160 PROJECT MEPS ID : DRAWING SIZE :
A2
N 2703306.3140 N 2703260.9350

4720
B1N-2021-008300-P01-S05
21.62m 4.00m 21.58m

OFFICIAL USE ONLY :

VEHICULAR ACCESS

(Benchmark)±0.00
(Sea Level) 121.83

DECORATED BOUNDARY WALL

1 BOUNDARY WALL PLAN

A401 SCALE 1:50
 FINISHING
PLOT LIMIT 01 - BIEGE PAINT PLOT LIMIT
02 - STEEL DOOR (BROWN COLOR)
47.20m 03 - HIDDEN LIGHT
04 - ALUMINUM LOUVER DOOR (LIGHT BEIGE COLOR)
21.62m 4.00m 9.03m 1.50m 11.05m

GENERAL NOTES :
3.50m

3.50m
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
H OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
1 ELEVATION -1 4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
A402 SCALE 1:100 5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

PLOT LIMIT PLOT LIMIT 02 ---- 04-09-2024

47.30m 01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :
3.50m

SUB DEVELOPER:
XXXX

OWNER:
2 ELEVATION -2 1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI

A402 SCALE 1:100 5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

PLOT LIMIT PLOT LIMIT

47.20m ENGINEER REGISTRATION CARD:

3.50m

PROJECT NAME :

RESIDENTIAL VILLA

3 ELEVATION -3 ZONE :

SCALE 1:100 KHALIFA CITY

A402
SECTOR : PLOT :

PLOT LIMIT PLOT LIMIT

SW1 58
47.20m
PROJECT DESCRIPTION :
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :
BOUNDARY WALL
3.50m

ELEVATIONS
DRAWING NO : REVISION NO:

A402 -
4 ELEVATION -4 SUBMISSION DATE : SCALE :
A402 SCALE 1:100
09/07/2024 AS SHOWN
PLOT LIMIT
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
PLOT LIMIT OFFICIAL USE ONLY :

(IN-SIDE) (OUT-SIDE)

5 ELEVATION DETAIL 6 SECTION I-I 7 DETAIL D01

A402 SCALE 1:100 A402 SCALE 1:100 A402 SCALE 1:100
 GENERAL NOTES :
1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

02 ---- 04-09-2024
01 ---- 12-05-2024
REV. NO. DESCRIPTION Date
MASTER DEVELOPER :

SUB DEVELOPER:
XXXX

OWNER:
1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
5- FADIA MAHMOUD ALI

CONSULTANT :

TASEES CONSULTING ENGINEERS

ENGINEER REGISTRATION CARD:

PROJECT NAME :

RESIDENTIAL VILLA
ZONE :

KHALIFA CITY
SECTOR : PLOT :

SW1 58
PROJECT DESCRIPTION :

500
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬
‫ومنطقة الخدمات‬

DRAWING TITLE :

ESTDAMA
1 ROOF SECTION DETAIL A-A
SCALE 1:50 DRAWING NO : REVISION NO:
ESR01
EST01 -
2600
20 70 60 70 20 20
SUBMISSION DATE : SCALE :
200
09/07/2024 AS SHOWN
PROJECT MEPS ID : DRAWING SIZE :
B1N-2021-008300-P01-S05 A2
OFFICIAL USE ONLY :

2 WALL SECTION DETAIL B-B 3 GLAZING SECTION DETAIL C-C

SCALE
ESR01 1:50 SCALE
ESR01 1:50
 1. PROJECT DATA 2. GENERAL NOTES
1.1 PLOT DATA 2.1 CONSULTANT'S LIABILITY

1.1.1 ZONE KHALIFA CITY The project's scope is limited to each property line per DMT's site plan and its setback parameter. It is the Consultant's sole
responsibility and liability to update the design and the specifications per any changes required by Building Permits Official's;
1.1.2 SECTOR SW1 Consultant should ensure it be will designed /constructed in accordance to the minimum ADIBC 2013 code's requirements (and its
1.1.3 NUMBER 58 listed references) to safeguard the public health, safety and general welfare through structural strength, means of egress facilities,
2,231.94 2.1.1 stability, sanitation, adequate light and ventilation, energy conservation, minimum habitable spaces dimensions, and safety to life
1.1.4 AREA
and property from fire and other hazards attributed to the built environment and to provide safety to fire fighters and emergency
1.1.5 Total GFA 968.00 sqm responders during emergency operations. Moreover to ensure that they have complied with all other applicable statutes, standards
1.1.6 Total BUA 455.00 sqm and regulations are administered by all relevant authorities and agencies, such as - and not limited to- DMT GENERAL NOTES :
Estidama, DoT, ADCD, H.S.E., all associated utility agencies, etc. In case of any discrepancy of codes enforcement between 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
1.2 PROJECT PERSPECTIVE authorities the more restricted interpretation will govern. OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
ARCHITECT / ENGINEER.
3. CODE ANALYSIS DATA 2. DO NOT SCALE FROM THIS DRAWING.
3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
3.1 CHAPTER 1 - SCOPE AND ADMINISTRATION ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
105.3 - Application for permit. To obtain a permit, the applicant shall first file an application therefor in writing on a form 4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
3.1.1 furnished by the Building Permits Directorate for that purpose. Such application shall:
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
7. Indicate the number of bedrooms for residential occupancies.
5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION
ITEMS ACTUAL REMARKS
Number of bedrooms at Villa 7 Bedrooms ----
3.1.2
Number of bedrooms at Service Block 0 Bedroom ----
Number of bedrooms at Majlis 0 Bedroom ----
02 ---- 04-09-2024
3.2 CHAPTER 3 - USE AND OCCUPANCY CLASSIFICATION
01 ---- 12-05-2024
LEGEND TYPE OF OCCUPANCY ADIBC REFERENCE REMARKS
3.2.1 R3 310.1 ---- REV. NO. DESCRIPTION Date
U ----
312.1 MASTER DEVELOPER :
3.3 CHAPTER 4 - SPECIAL DETAILED REQUIREMENTS BASED ON USE AND OCCUPANCY
406.1.1 Classification. Buildings or parts of buildings classified as Group U occupancies because of the use or
character of the occupancy shall not exceed 93 m2 in area or one story in height except as provided in Section
3.3.1
406.1.2. Any building or portion thereof that exceeds the limitations specified in this section shall be classified in the
SUB DEVELOPER:
occupancy group other than Group U that it most nearly resembles.

3.3.2
406.1.2 Area increase. Group U occupancies used for the storage of private or plea sure-type motor vehicles where no
repair work is completed or fuel is dispensed are permitted to be 280 m2 when the following provisions are met:
XXXX
406.1.4 Separation. Separations shall com ply with the following:
3.3.3
Separation between Villa and private garage (20-min fire door) OWNER:
Openings from garage directly into a bedroom shall not be permitted. 1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI
3.3.4 406.2.9 Attached to rooms . Openings from a parking garage directly into a room used for sleeping purposes shall not be 2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
permitted. 5- FADIA MAHMOUD ALI

3.4 CHAPTER 5 - GENERAL BUILDING HEIGHTS AND AREAS CONSULTANT :

508.2.1 Area limitations. Aggregate accessory occupancies shall not occupy more than 10 per cent of the building TASEES CONSULTING ENGINEERS
3.4.1 area of the story in which they are located and shall not exceed the tabular values in Table 503, with out building
area increases in accordance with Section 506 for such accessory occupancies.

3.4.2 For Building Height, planning Regulations will be more stringent than per Table 503.. ENGINEER REGISTRATION CARD:
3.4.3 For Number of Stories, Planning Regulations will be more stringent than per Table 503.
3.4.4 And Building Area is Unlimited for R3 per Table 503.
ITEM ADIBC REFERENCE PROVIDED REMARKS
Type of construction Table 503 TYPE II-A ----
3.4.5
Number of floors Table 503 3 STORIES ----
Building area Table 503 976.41 sqm ----

3.5 CHAPTER 6 - TYPES OF CONSTRUCTION

PROJECT NAME :
3.5.1 Table 601. Fire resistivity required for primary and secondary structural elements.
3.5.2 Table 601. Fire resistivity of exterior bearing walls / interior bearing walls (if any) RESIDENTIAL VILLA

605 160
2030
500 160
(Ligh t Be ig e Co lor)
605 ZONE :
A luminum Louver S hade

KHALIFA CITY

PLOT NO. 57 SECTOR : PLOT :

47.20m
SW1 58
E 252077.5400 E 252090.6950
N 2703319.4680 N 2703274.1000
1.50m

FX FX FX FX

FX OP FX OP OP FX OP FX

PROJECT DESCRIPTION :
FX FX
FX FX FX FX FX FX

‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬

‫ومنطقة الخدمات‬
FX FX

FX FX

FX FX

FX FX FX FX
OP OP

DRAWING TITLE :
FX FX FX FX FX FX

01

02

03

04
ESTDAMA

2 FRONT ELEVATION DRAWING NO : REVISION NO:

AC01 -
PLOT NO. 56

PLOT NO. 60

AC01 SCALE 1:50

47.30m
47.20m

1.50m 1.50m

SUBMISSION DATE : SCALE :

AS SHOWN
2665
450 545 215 245 215
(Ligh t Be ig e Co lor)
A luminum Louver S hade
125 420 450
09/07/2024
POLYFLEX OR POLYTEX PROJECT MEPS ID : DRAWING SIZE :
A2
SCREED TO FALL IN 1:90 SLOPE
F.CIELING
BITUTEX & POLYFAB

B1N-2021-008300-P01-S05
POLYFOAM
RCC SLAB AS SCHEDULE
12 MM C/S PLASTER AND PAINT

LOBBY

64

63

62

OFFICIAL USE ONLY :

62

61

F.CIELING F.CIELING

FX

51

H 90CM GLASS HANDRAIL

FX OP FX

2.90m
50

GLASS HANDRAIL
49

48

47

W01 46

45
W04
44

43

42

41

40
2.90m

FX FX FX
39

38
2.00m

37

36

LIVING HALL LOBBY 34

35
SITING AREA
32
33
A1

31

30

29

28

F.CIELING F.CIELING
E 252032.1610 E 252045.3160
N 2703306.3140 N 2703260.9350
FX

20

47.20m
19

H 90CM GLASS HANDRAIL

GLASS HANDRAIL
18
FX FX
OP 17

16

15

14

13

12
W03
11

10

09

08

07
FX FX FX
06

05

LOBBY 03
04
DINING
D1 01
02
A1
04

03

02

01

IMS
FLOOR FINISHES AS SCHEDULE TREAD -30 CM
7 CM MIN. C / S MORTAR RISE -15.3125 CM
10 CM THICK PCC WITH A-142 MESH
1000 G. POLYTHENE SHEET
WELL COMPACTED SOIL

1 SITE PLAN 3 SECTION THRU B-B

AC01 SCALE 1:50 AC01 SCALE 1:50
 Table 906.1ADDITIONAL REQUIRED PORTABLE FIRE EXTINGUISHERS IN THE INTERNATIONAL FIRE CODE . Portable Fire
3.8.2.1
3.6 CHAPTER 7 - FIRE AND SMOKE PROTECTION FEATURES Extinguishers will be provided in Tents and Membrane structures (IFC 2404.12). SMOKE DETECTOR PLAN

701.1 Scope. The provisions of this chapter shall govern the materials, systems and assemblies used for structural fire 3.8.3 SECTION 907 - FIRE ALARM AND DETECTION SYSTEM
3.6.1 resistance and fire-resistance-rated construction separation of adjacent spaces to safe guard against the spread of
fire and smoke within a building and the spread of fire to or from buildings. 907.1 General. This section covers the application, installation, performance and maintenance of fire alarm systems
3.8.3.1
and their components .
705.5.1.1 and 705.5.1.2 Table. Fire resistivity of exterior walls and (projection , opening , penetration if any ) due to Fire
3.6.2 3.8.3.2 907.2.10.3 Smoke alarms . Single- and multiple-station smoke alarms shall be installed in accordance with Section
Separation Distances.
907.2.11.
708.4 Fire-resistance rating. Shaft enclosures shall have a fire-resistance rating of not less than 2 hours where connecting four 907.2.11.2 Groups R-2, R-3, R-4 and I-1. Single- or multiple-station smoke alarms shall be installed and maintained in
Groups R-2, R-3, R-4 and I-1 regardless of occupant load at all of the following locations:
W03 W03

3.6.3 stories or more, and not less than 1 hour where connecting less than four stories. The number of stories connected by the shaft

W07

W07
GENERAL NOTES :
D5 D5

enclosure shall include any basements but not any mezzanines. Shaft enclosures shall have a fire-resistance rating not less than the floor assembly 1. On the ceiling or wall outside of each separate sleeping area in the immediate vicinity of bedrooms. BATH STORE

penetrated, but need not exceed 2 hours. Shaft enclosures shall meet the requirements of Section 703.2.1. 2. In each room used for sleeping purposes . BEDROOM -2 KITCHEN

1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
H

Exception: Single- or multiple-station smoke alarms in Group I-1 occupancies shall not be required where smoke
BATH BATH

W07

W07
OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE
W03 W03 FB
D5 D4 D4 D5

detectors are provided in the sleeping rooms as part of an automatic smoke detection system. D4 D4

3.8.3.3 3. In each story within a dwelling unit, including basements but not including crawl spaces and uninhabitable attics. In ARCHITECT / ENGINEER.

P A S S A G E W 120CM

P A S S A G E W 120CM
BEDROOM -1 MAI D ROOM

dwellings or dwelling units with split levels and without an intervening door between the adjacent levels, a smoke alarm
DINING

W03

W03
2. DO NOT SCALE FROM THIS DRAWING.
installed on the upper level shall suffice for the adjacent lower level provided that the lower level is less than one full story
A1 A1

3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT

H 90CM GLASS HANDRAI L

below the upper level.

D5 D5

BATH D5 D5 LAUNDRY

ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL

A2 A2

W05

W05
H.W I RON

P A S S A G E W 140CM

P A S S A G E W 140CM
907.2.11.3 Inter connection. Where more than one smoke alarm is required to be installed within an individual dwelling W07 LIFT W07
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT
D2 D2
+0 .70m +0 .70m

unit or sleeping unit in Group R-1, R-2, R-3 or R-4, the smoke alarms shall be inter connected in such a manner that the
F .F .L. F .F .L.

3.8.3.4 W07
D6
W07

activation of one alarm will activate all of the alarms in the individual unit. The alarm shall be clearly audible in all bed D5
H.W
LOBBY dn
TO THE ATTENTION OF THE ARCHITECT / ENGINEER.
rooms over back ground noise levels with all intervening doors closed.

W05

W05
TOI LET H.W
D5
TOI LET H 90CM GLASS HANDRAI L

5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

1
A1 A301

A1
LOBBY
D4

907.2.11.4 Power source. In new construction, required smoke alarms shall receive their primary power from the building
A1

WOMEN HALL

W03
wiring where such wiring is served from a commercial source and shall be equipped with a battery backup. Smoke alarms with

W03
ENTRANCE HALL

integral strobes that are not equipped with battery backup shall be connected to an emergency electrical system. Smoke alarms
shall emit a signal when the batteries are low. Wiring shall be permanent and without a disconnecting switch other than as
D1

3.8.3.5 W02 W02

02 ---- 04-09-2024

W07

W07
A1
D3
MAI N ENTRANCE

required for over current protection. A3 H.W

Exception: Smoke alarms are not required to be equipped with battery backup where they are connected to an
D5
LIVI NG HALL ARABIC MAJLIS
TOI LET

emergency electrical system. 01 ---- 12-05-2024

W07

W07
W03 W03

3.9 CHAPTER 10 - MEANING OF EGRESS REV. NO. DESCRIPTION Date

3.9.1 SECTION 1005 - EGRESS WIDTH

1 GROUND FLOOR PLAN MASTER DEVELOPER :

3.9.5.6 1005.1,sec.1007.03 and 1009.1. Minimum required width for exit stairways: 0.915 m if serving people load < 50 (i.e. area <925 m2. AC02 SCALE 1:150
1005.1,sec.1007.03 and 1009.1. Minimum required width for other egress components (doorways, corridors, etc…): 0.915 m (if
3.9.5.7
area < 3,300 m2 (179 occupant x 5.1 mm).
1005.1, 1008.1.1, 1010.5, 1017, 1018.2, 1023.2. Minimum required width for other egress components (doorways, corridors, SUB DEVELOPER:
3.9.5.8 etc…):b. If area > 3,300 m2, calculatemin width (occupants x 5.1 mm)
XXXX
W04 W04

W08

W08
3.9.1 SECTION 1008 - DOORS, GATES AND TURNSTILES
D5

BATH TOI LET

BEDROOM -4 OFFICE
D5

A3

1008.1.1 Size of doors . The minimum width of each door opening shall be sufficient for the occupant load thereof and shall
DRS TOI LET

W08

W08
W04 W04

OWNER:
D4 D4 D5

provide a clear width of 815 mm. Clear openings of door ways with swinging doors shall be measured between the face of the D4 D4

door and the stop, with the door open 90°. Where this section requires a min i mum clear width of 815 mm and a door opening 1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI

P A S S A G E W 120CM

P A S S A G E W 120CM
BEDROOM -3 STUDY ROOM

includes two door leaves without a mullion, one leaf shall pro vide a clear opening width used for the movement of beds shall

W04
W04
provide a clear width not less than 1.05 m. The height of door openings shall not be less than 2.05 m. A3
A1
SI TI NG AREA

H 90CM GLASS HANDRAI L

A1

2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
3.9.1.1 FB

5- FADIA MAHMOUD ALI

A4

DRS BATH D5 PANTRY

A2 A2
D5 H

W06

W06
STORE

Exceptions:

P A S S A G E W 140CM

P A S S A G E W 140CM
7. In other than Group R-1 occupancies, the mini mum widths shall not apply to interior egress doors within a dwelling unit or
W08 LIFT W08
CONSULTANT :

W09

W09
sleeping unit that is not required to be an Accessible unit, Type A unit or Type B unit.
TASEES CONSULTING ENGINEERS
D6
W08 W08

dn
LOBBY

W06

W06
H 90CM GLASS HANDRAI L
D5 D5

3.9.2 SECTION 1009 - STAIRWAYS

H.W TOI LET 1
BATH DRS
A301

A2 A2

A3

A3

D4

3.9.2.1 1003.2 Ceiling height. Min. headroom clearance above landings 2.3m ENGINEER REGISTRATION CARD:

W04

W04
LIVI NG HALL SI TTI NG AREA

3.9.2.2 1009.2 Headroom. Min. stairways headroom clearance 2.05m

1009.4.2 Riser height and thread depth (with exception 5 ). Max. stair riser height 195 mm and min. 100 mm.
D4

3.9.2.3 W02 W01 W02

W08

W08
DRS

Min. rectangular tread depths 280 mm D5

A3

BEDROOM -2 MASTER BEDROOM

3.9.2.4 1009.4.5. Max. radius of curvature at the leading edge of the tread 14.5 mm as per §1009.4.5. BATH
VOID

W08

W08
3.7 CHAPTER 8 - INTERIOR FINISHES 3.9.2.5 1009.5 and 1009.7 Vertical rise . Max. vertical rise of a stairs flight = 3.65 m with exception 2, W04 W04

3.9.2.6 Width of each landing not be less than width of the stairway served.
3.7.1
801.1 Scope. Provisions of this chapter which shall govern the use of materials used as interior finishes, trim and decorative
materials. 3.9.2.7 Min. dimension of landing 915 mm measured in the direction of travel as per 1009.5, with exception 2.
1009.9 Spiral stairways. A spiral stairway shall have a 71/2-inch (191 mm) minimum clear tread depth at a point 12 inches (305
2 FIRST FLOOR PLAN
3.9.2.8
803.1.1 Interior wall and ceiling finish materials. Interior wall and ceiling finish materials shall be classified in accordance mm) from the narrow edge. The risers shall be sufficient to provide a headroom of 78 inches (1981 mm) minimum, but riser height
shall not be more than 91/2 inches (241 mm). The minimum stairway clear width at and below the handrail shall be 26 inches
AC02 SCALE 1:150 PROJECT NAME :
with ASTM E 84 or UL 723. Such interior finish materials shall be grouped in the following classes in accordance with their
flame spread and smoke-developed indexes.
Class A: Flame spread index 0-25; smoke-developed index 0-450. 3.9.2.9
1009.12 except 2 & 5 sec.1012.6 except 1. No more than three risers are permitted as a change of elevation without handrail RESIDENTIAL VILLA
3.7.2 -Handrail shall be at least on one side and either side.
Class B: Flame spread index 26-75; smoke-developed index 0-450. 1009.13 Stairway to roof. 1009.13.2 Protection at roof hatch openings. Where the roof hatch opening providing the required SL
O PE

ZONE :
O PE
Class C: Flame spread index 76-200; smoke-developed index 0-450. 3.9.2.10 access is located within 3m of the roof edge, such roof access or roof edge shall be protected by guards installed in accordance SL

with the provisions of Section 1013.

Exception: Materials tested in accordance with Section 803.1.2.
3.7.3 Table.803.9. Interior Finishes (wall and ceiling) 3.9.3 SECTION 1012 - HANDRAILS KHALIFA CITY

S LO

PE
1012.2 Height. Handrail height measured above stair tread nosing's: uniform, 865 mm, 965 mm

SLO
PE
Handrails shall comply with1012.2 through 1012.9 and 1012.6, with exception 1, be provided to at least one side D4 D4 SECTOR : PLOT :
of stairway, and be either:
3.9.3.1 Type I: (32mm<dia<51mm)(100mm<perimeter<160mm, with max. 56mm cross section)or
SW1 58

P A S S A G E W 140CM

P A S S A G E W 140CM
LIFT

Type II: (perimeter>160mm with a graspable finger recess) as per 1012.3.

W09

W09
D6

3.9.3.2 1012.7 Clearance. Min. clear space between handrail and wall = 38 mm for graspability. LOBBY
dn

3.9.3.3 1012.8 Projections. into the required width of stairways at each handrail not more than 115 mm. PROJECT DESCRIPTION :
H 90CM GLASS HANDRAI L

3
D3 A301

3.9.4 SECTION 1013 - GUARDS ‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬

S LO
PE
SLO

PE
‫ومنطقة الخدمات‬
10.13.1 Where required. Openings below 0.915 m shall not allow passage of a sphere 100 mm in diameter.
Openings above 0.915 m shall not allow passage of a sphere 110 mm in diameter.
3.9.4.1 Openings formed by risers, treads and bottom rail shall not allow passage of a sphere 150 mm in diameter. DRAWING TITLE :
Guards are min 1.05 m high (except on stairs allowed to be height of handrail)
SL
O PE
O PE

ESTDAMA
SL

3.9.4.2 1013.2 Height. Guards are min 1.05 m high (except on stairs allowed to be height of handrail)

3 ROOF PLAN DRAWING NO : REVISION NO:

AC02 SCALE 1:150 AC02 -

40 X 70mm WOODEN BALUSTRADE
HANDRAIL FIXED TO
SUBMISSION DATE : SCALE :
STEEL TOP

AS SHOWN
FRAME
CAST IRON
BALUSTRADE
09/07/2024
PROJECT MEPS ID : DRAWING SIZE :

1 DETAIL D-05 B1N-2021-008300-P01-S05 A2

AC02 SCALE 1:4
(Light Beige Color)
07 Aluminum Louver Shade

05
06
OFFICIAL USE ONLY :
04

20
03
19

H 90CM GLASS HANDR 02

GLASS HANDRAIL
18

17
01
16

15

14

13

12

11

SYMBOL DESCRIPTION
10

09

08

07

SMOKE DETECTOR
06

05

LOBBY 03
04

01
02
A1 H HEAT DETECTOR

3.8 CHAPTER 9 - FIRE PROTECTION SYSTEMS FIRE EXTINGUISHER

FB FIRE BLANKET
3.8.1 SECTION 903 - AUTOMATIC SPRINKLER SYSTEM

3.8.1.1
903.1 General : Automatic Sprinkler system shall be installed for building design or hazards in the locations set forth in section
IMS
TREAD -30 CM
RISE -15.3125 CM
4 TOP ROOF PLAN
903.2.11.1 through.903.2.11.6 Exception : Groups R3 - and U.
2 SECTION B-B 3 SECTION (REF.DWG.NO.A301) AC02 SCALE 2 HOURS FIRE RATE

3.8.2 SECTION 906 - PORTABLE FIRE EXTINGUISHERS AC02 SCALE 1:4 AC02 SCALE 1:4 1:150 1 HOURS FIRE RATE
 3.9.5 SECTION 1014 - EXIT ACCESS 3.10 CHAPTER 12 - INTERIOR ENVIRONMENT TRAVEL DISTANCE PLAN
1014.2 Egress through intervening spaces. Egress through intervening spaces shall comply with this section. 1203.4.1 Ventilation area required. In case of using natural ventilation for a room, the minimum openable area to the outdoors =
Exceptions: 3.10.1
3.9.5.1 4% of the floor area being ventilated.
5. For one- and two-family dwellings, a means of egress may pass through rooms and intervening spaces except garages.
1205.2 Natural Lighting. In case of natural lighting, minimum net area of the exterior glazed openings = 8% of the floor area of the
3.9.6 SECTION 1015 - EXIT AND EXIT DOORWAYS 3.9.7 SECTION 1016 - EXIT ACCESS TRAVEL DISTANCE 3.10.2 room served. Provisions for adjoining spaces with no natural ventilation and lighting shall comply with §1203.4.1.1 &
§1205.2.1.When openings below grade provide required natural ventilation shall comply with §1203.4.1.2.
1015.2 Exit or exit access doorway. arrangement. 1016.1 Travel distance limitations. Exits shall be so
Required exits shall be located in a manner that makes located on each story such that the maximum length of 3.10.3 1208.1 Minimum room widths. Habitable spaces shall be min. 2.15 m in lesser dimension. Kitchen min. clear passageway 0. 915 W03 W03

3.9.6.1 their availability obvious. Exits shall be unobstructed at all exit access travel, measured from the most remote m.

W07

W07
D5 D5

3.10.4
BATH STORE

point within a story along the natural and unobstructed

times. Exit and exit access door ways shall be arranged in
path of egress travel to an exterior exit door at the
1208.2. Minimum Ceiling Heights. Habitable spaces and corridors min. ceiling height 2.3 m. Some of the beams can be allowed BEDROOM -2 KITCHEN
GENERAL NOTES :
accordance with Sections 1015.2.1 and 1015.2.2.
H

3.9.7.1 to project 150 mm below the required ceiling height. A furred ceiling can be allowed in a third of the room area, but not less than 1. ALL DIMENSIONS ARE IN MILLIMETRES AND LEVELS ARE IN METERS UNLESS NOTED
BATH BATH

level of exit discharge , an entrance to a vertical exit

W07

W07
FB

2.15 m ceiling height. Bathrooms, kitchens, storage rooms and laundry rooms min. ceiling height 2.15 m.
W03 W03
D5 D4 D4 D5

enclosure , an exit D4 D4

OTHERWISE. ALL DIMENSIONS TO BE VERIFIED ON SITE AND APPROVED BY THE

TABLE 1015.1 passage way , a horizontal exit , an exterior exit stair

P A S S A G E W 120CM

P A S S A G E W 120CM
1208.3 Room Area. Habitable rooms min. net floor area 6.5m2 (at least one room not less than 11 m2), Kitchens min. of gross
BEDROOM -1
DINING
MAI D ROOM
ARCHITECT / ENGINEER.

W03

W03
SPACES WITH ONE EXIT OR EXIT ACCESS DOORWAY way or an exterior exit ramp , shall not exceed the
distances given in Table 1016.1. 3.10.5 floor area 12 m2, as per §Showers walls with a nonabsorbent surface min height of 1.8 m above the drain inlet, as per §1210.3. A1

H 90CM GLASS HANDRAI L

A1

2. DO NOT SCALE FROM THIS DRAWING.

3. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH OTHER RELEVANT
D5 D5

TABLE 1016.1 3.10.1 SECTION 1203 - VENTILATION

BATH D5
A2 A2
D5 LAUNDRY

ARCHITECTURAL, STRUCTURAL, MEP, LANDSCAPE AND CIVIL DRAWINGS, AND ALL

W05

W05
H.W I RON

EXIT ACCESS TRAVEL DISTANCE

P A S S A G E W 140CM

P A S S A G E W 140CM
RELEVANT SECTIONS OF THE SPECIFICATIONS, AUTHORITY PERMITS AND NOC's.
W07 LIFT W07

1203.4 Natural ventilation. Natural ventilation of an occupied space shall be through windows, doors, louvers or other openings to +0 .70m
D2 D2
+0 .70m

4. ANY DISCREPANCY IN THE DRAWINGS AND DESIGN DOCUMENTS SHALL BE BROUGHT

F .F .L. F .F .L.

3.10.1.1 the out doors. The operating mechanism for such openings shall be provided with ready access so that the openings are readily W07
D6
W07

controllable by the building occupants. TO THE ATTENTION OF THE ARCHITECT / ENGINEER.

H.W
D5
LOBBY dn

W05
TOI LET H.W

W05
D5
TOI LET H 90CM GLASS HANDRAI L

5. CHECK ALL DIMENSION ON SITE PRIOR TO CONSTRUCTION

1
A1 A301

1203.4.1 Ventilation area required. The minimum openable area to the out doors shall be 4 per cent of the floor area being
A1
LOBBY

3.10.1.2
D4

ventilated. A1

WOMEN HALL

3.9.8 SECTION 1021 - NUMBER OF EXITS AND CONTINUITY

W03

W03
3.10.2 SECTION 1205 - LIGHTING
ENTRANCE HALL

D1

W02 W02

1021.2 Single exits . Only one exit shall be required 02 ---- 04-09-2024

W07

W07
A1

1205.2 Natural Light : The minimum net glazed area shall be not less then 8% of the floor area of the room served
D3

3.10.2.1
MAI N ENTRANCE
A3 H.W

from Group R-3 occupancy buildings or from stories of LIVI NG HALL ARABIC MAJLIS
D5

other buildings as indicated in Table 1021.2. The openable area to the outdoor is more then 8% of the floor area because The Regulations is more restrictive TOI LET

3.10.2.2
15% then its already complied 01 ---- 12-05-2024

W07

W07
Occupancies shall be permitted to have a single exit W03 W03

in buildings other wise required to have more than

3.10.3 SECTION 1208 - INTERIOR SPACE DIMENSIONS REV. NO. DESCRIPTION Date
GROUND FLOOR PLAN
one exit if the areas served by the single exit do not
exceed the limitations of Table 1021.2.
Mixed occupancies shall be permitted to be served by 1210.3 Showers. Shower compartments and walls above bathtubs with installed shower heads shall be finished with a
1 MASTER DEVELOPER :
3.10.3.1
3.9.4.2 single exits pro vided each individual occupancy
complies with the applicable requirements of
TABLE 1021.1 smooth, nonabsorbent surface to a height not less than 1.8 m above the drain inlet.
AC03 SCALE 1:150
MINIMUM NUMBER OF EXITS FOR OCCUPANT LOAD 3.10.3.2 All room width are more than 2.15m
Table 1021.2 for that occupancy. Where applicable,
cumulative occupant loads from adjacent 3.10.3.3 All ceiling heights are more than 2.3m
occupancies shall be considered in accordance with
the provisions of Section1004.1.
3.10.3.4 All area are more than 11m ²
W04 W04
SUB DEVELOPER:
Basements with a single exit shall not be located more
XXXX

W08

W08
3.11 CHAPTER 24 - GLASS AND GLAZING
D5

BATH TOI LET

than one story below grade plane.

BEDROOM -4 OFFICE
D5

A3

DRS TOI LET

W08

W08
3.11.1 SECTION 2406 - SAFETY GLAZING
W04 W04
D4 D4 D5

D4 D4

OWNER:

P A S S A G E W 120CM

P A S S A G E W 120CM
BEDROOM -3 STUDY ROOM

2406.4 Hazard ous locations. The fol low ing shall be considered specific hazardous locations requiring safety glazing materials: 1- AHMED SULTAN ABDULLA RASHED ALMHEIRI 3- MOHAMED SULTAN ABDULLA RASHED ALMHEIRI

W04

W04
SI TI NG AREA
A1 A1

TABLE 1021.2 1. Glaz ing in swing ing doors except jalousies (see Section 2406.4.1).
2- ABDULLA SULTAN ABDULLA RASHED ALMHEIRI 4- AYESHA SULTAN ABDULLA RASHED ALMHEIRI
A3
H 90CM GLASS HANDRAI L

STORIES WITH ONE EXIT

FB

3.11.1.1 2. Glaz ing in fixed and slid ing pan els of slid ing door assemblies and pan els in slid ing and bifold closet door assemblies. DRS BATH D5
A4

PANTRY

3. Glaz ing in storm doors. 5- FADIA MAHMOUD ALI

A2 A2
D5 H

W06

W06
STORE

4. Glaz ing in unframed swing ing doors.

P A S S A G E W 140CM

P A S S A G E W 140CM
W08 LIFT W08

CONSULTANT :

W09

W09
3.11.1.2 2406.4 Hazardous locations . Safety glass in hazardous locations : Enclosures of showers, tubs, and saunas, or next to W08
D6
W08

swimming pool per items 5,9

TASEES CONSULTING ENGINEERS
dn
LOBBY

W06

W06
H 90CM GLASS HANDRAI L
D5 D5
H.W TOI LET BATH DRS

2406.4 Hazardous locations . Adjacent to doors within height of 1.5, and within 610mm distance per items 6.
1

3.11.1.3
A301

A2 A2

A3

3.11.1.4 2406.4 Hazardous locations . Safety glass in hazardous locations : In panes greater than 0.8 m2 per items 7
A3

D4

W04

W04
ENGINEER REGISTRATION CARD:
LIVI NG HALL SI TTI NG AREA

2406.4 Hazardous locations . Safety glass in hazardous locations : In Panes with edge less than 455 mm above floor unless
3.11.1,5
there is a protective bar per sec. items 7.
D4
W02 W01 W02

W08

W08
2406.4 Hazardous locations . Safety glass in hazardous locations : In Panes with edge greater than 915 mm above floor unless DRS
A3

3.11.1.6
there is a protective bar sec. items 7
D5 BEDROOM -2 MASTER BEDROOM

BATH
VOID

W08

W08
3.11.1.7 2406.4 Hazardous locations . Safety glass in hazardous locations : In guards and railings per sec. items 8 W04 W04

3.11.1.8 2406.4 Hazardous locations . Safety glass in hazardous locations : Adjacent to stairways, landings and ramps per sec. items 10,11

3.11.2 SECTION 2406.2 (1) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING CPSC 16 CFR 1201 2 FIRST FLOOR PLAN
AC03 SCALE 1:150 PROJECT NAME :
SECTION 1029
EMERGENCY ESCAPE AND RESCUE
RESIDENTIAL VILLA
NUMBER OF EXITS

ZONE :
SL
O PE O PE
ADIBC SL

ITEMS PROVIDED ALLOWED REMARKS

REFERENCE

Distances between exits complies with the max overall diagonal 3.11.3 SECTION 2406.2 (2) MINIMUM CATEGORY CLASSIFICATION OF GLAZING USING ANSI Z 97.1
KHALIFA CITY
as per Section 1015.2 ---- ----
SECTION 1015.2 COMPLIES

S LO

PE
Emergency escape and rescue openings on sleeping rooms ---- ---- ----

SLO
SECTION 1029.1

PE
SECTOR : PLOT :
3.9.4.3 Emergency escape and rescue openings minimum area SECTION 1029.3 YES YES COMPLIES D4 D4

Emergency escape and rescue openings minimum widths SECTION 1029.2.1 0.66m 0.5m COMPLIES
SW1 58

P A S S A G E W 140CM

P A S S A G E W 140CM
LIFT

Emergency escape and rescue openings minimun heights SECTION 1029.2.1 1.2m 0.6m COMPLIES

W09

W09
D6

Emergency escape and rescue openings max. height from floor SECTION 1029.3 1.10m 1.1m COMPLIES LOBBY
dn

H 90CM GLASS HANDRAI L

D3 A301
3
PROJECT DESCRIPTION :
3.9 SECTION 1029 - EMERGENCY ESCAPE AND RESCUE
‫الجيم‬ ‫وتكبير المساحة والغاء‬ ‫الفيﻼ‬ ‫تصميم‬ ‫إعادة‬

S LO
PE
SLO

PE
1029.1 General. In addition to the means of egress required by this chapter, pro visions shall be made for emergency ‫ومنطقة الخدمات‬
escape and rescue in Group R and I-1 occupancies. Basements and sleeping rooms below the fourth story above
grade plane shall have at least one exterior emergency escape and res cue opening in accordance with this section.
Where basements contain one or more sleeping rooms, emergency escape and rescue openings shall be required in
DRAWING TITLE :
3.9.1 SL

each sleeping room, but shall not be required in adjoining areas of the basement. Such openings shall open directly
O PE
O PE

ESTDAMA
SL

into a public way or to a yard or court that opens to a public way.

1029.2 Minimum size. Emergency escape and rescue openings shall have a minimum net clear opening of 0.53m ².
3.9.5.2
Exception: The minimum net clear opening for emergency escape and rescue grade-floor opening shall be 0.465 m ²
1029.2.1 Minimum dimensions. The minimum net clear opening height dimension shall be 24 inches (610 mm).
3 ROOF PLAN DRAWING NO : REVISION NO:
The minimum net clear opening width dimension shall be 508 mm. The net clear opening dimensions shall be the result of
3.9.5.3
normal operation of the opening. AC03 SCALE 1:150 AC03 -
3.9.5.4
1029.3 Maximum height from floor. Emergency escape and rescue openings shall have the bottom of the clear opening not
greater than 1.1 m measured from the floor. SUBMISSION DATE : SCALE :

AS SHOWN
1029.4 Operational constraints. Emergency escape and rescue openings shall be operational from the inside of the room without
the use of keys or tools. Bars, grilles, grates or similar devices are permitted to be placed over emergency escape and rescue
openings provided the minimum net clear opening size complies with Section 1029.2 and such devices shall be releasable or
09/07/2024
3.9.5.5 removable from the inside without the use of a key, tool or force greater than that which is required for normal operation of the
escape and rescue opening. Where such bars, grilles, grates or similar devices are installed in existing buildings, smoke alarms PROJECT MEPS ID : DRAWING SIZE :
A2
shall be installed in accordance with Section 907.2.11 regardless of the valuation of the alteration.
B1N-2021-008300-P01-S05
EGRESS WINDOW REQUIREMENTS (Light Beige Color)
Aluminum Louver Shade

OFFICIAL USE ONLY :

W01 W02 W04

FX

OP
FX

OP
FX

OP FX OP
FX

FX
AUTO OPENING DOOR
W03 W05

FX FX FX
FX FX FX

FX FX FX

FX FX FX

SYMBOL DESCRIPTION
120

FX FX

FX FX
OP OP

OP
W09

FX FX FX FX FX

SMOKE DETECTOR
FX

F.F.L. F.F.L. F.F.L. F.F.L. F.F.L.

H
OP

W 01
2 .0 0 X 5.30 M
W 02
1 .3 0 X 8.65 M
W 03
2 .5 0 X 3.35 M
W 04
2 .5 0 X 3.00 M
W 05
1 .2 0 X 3.35 M
HEAT DETECTOR
E NTR ANCE E NTR ANCE B ED ROOMS B ED ROOMS TOILE T - BA TH - L AU NDRY
FX

W06 W08

FX
FIRE EXTINGUISHER
FX

FX
FX

OP

FB FIRE BLANKET

SAFETY BARRIER FOR CAR PARKING

OP
W07 OP

TOP ROOF PLAN

FX FX
FX

FX
FX

FX

4
DETAIL D08 AC03 SCALE
OP

2 HOURS FIRE RATE

FX

1
F.F.L. F.F.L. F.F.L. F.F.L.
AC03 SCALE 1:30 1:150 1 HOURS FIRE RATE
W 06 W 07 W 08 W 09

1 .2 0 X 3.00 M 0 .6 0 X 3.35 M 0 .6 0 X 3.00 M 1 .2 0 X 9.90 M

D RS - H .W H .W - TOIL ET -BATH D RS - TOILE T - BA TH S TAIR CASE