Lab Report

Course Code: CSE314

Course Name: Computer Networks

Lab No: 05
Experiment Name: Dynamic Routing OSPF.

Date of performance: 04 Aug 2023

Date of Submission: 12 Aug 2023

Submitted to Submitted By
Mr. Narayan Ranjan Chakraborty Name: Md Shefat Al Mahmud
Associate Professor ID: 213-15-4364
Department of CSE Section: 60_B
Daffodil International University Department of CSE
Daffodil International University
Lab Task: 04
Title: Dynamic Routing OSPF.

Equipment:

No Name Model/Type Quantity

1. Router Generic (PT) 05
2. End Device Laptop 05
3. Cable i) Cross Over 05
ii) Serial DCE 08

Configuration:
Connecting End Default
IP Address Subnet Mask
Device Device Gateway

Router0 PC0 150.150.150.5 255.255.0.0 150.150.150.6

Router1 PC1 153.153.153.10 255.255.0.0 153.153.153.11

Router2 PC2 151.151.151.11 255.255.0.0 151.151.151.12

Router3 PC3 154.154.154.15 255.255.0.0 154.154.154.16

Router4 PC4 152.152.152.12 255.255.0.0 152.152.152.13

Router S2/0 S3/0 S6/0 S7/0

156.156.156.10
Router0 155.155.155.10 157.157.157.10

159.159.159.10
Router1 155.155.155.11 158.158.158.10

165.165.165.15 170.170.170.16
Router2 157.157.157.11 159.159.159.11

160.160.160.15
Router3 156.156.156.11 165.165.165.14
170.170.170.15
Router4 158.158.158.11 160.160.160.16
Diagram:
Command: (Router CLI)

Router: 0
Router>enable
Router#configure terminal
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 150.150.150.6 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial2/0
Router(config-if)#ip address 155.155.155.10 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial6/0
Router(config-if)#ip address 156.156.156.10 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial3/0
Router(config-if)#ip address 157.157.157.10 255.255.252.0
Router(config-if)#no shutdown

Router(config)#router ospf 1
Router(config-router)#network 150.150.0.0 0.0.255.255 area 1
Router(config-router)#network 156.156.156.0 0.0.3.255 area 1
Router(config-router)#network 155.155.152.0 0.0.3.255 area 1
Router(config-router)#network 157.157.156.0 0.0.3.255 area

Router: 1
Router>enable
Router#configure terminal
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 153.153.153.11 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial2/0
Router(config-if)#ip address 155.155.155.11 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial3/0
Router(config-if)#ip address 159.159.159.10 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial6/0
Router(config-if)#ip address 158.158.158.10 255.255.0.0
Router(config-if)#ip address 158.158.158.10 255.255.252.0
Router(config-if)#no shutdown

Router(config-if)#router ospf 1
Router(config-router)#network 153.153.0.0 0.0.255.255 area 1
Router(config-router)#network 158.158.156.0 0.0.3.255 area 1
Router(config-router)#network 159.159.156.0 0.0.3.255 area 1
Router(config-router)#network 155.155.152.0 0.0.3.255 area 1

Router: 02
Router>enable
Router#configure terminal
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 154.154.154.16 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial2/0
Router(config-if)#ip address 157.157.157.11 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial3/0
Router(config-if)#ip address 159.159.159.11 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial6/0
Router(config-if)#ip address 165.165.165.15 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial7/0
Router(config-if)#ip address 170.170.170.16 255.255.252.0
Router(config-if)#no shutdown

Router(config)#router ospf 1
Router(config-router)#network 154.154.0.0 0.0.255.255 area 1
Router(config-router)#network 157.157.156.0 0.0.3.255 area 1
Router(config-router)#network 159.159.156.0 0.0.3.255 area 1
Router(config-router)#network 165.165.164.0 0.0.3.255 area 1
Router(config-router)#network 170.170.168.0 0.0.3.255 area 1
 Router: 03
Router>enable
Router#configure terminal
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 151.151.151.12 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial2/0
Router(config-if)#ip address 156.156.156.11 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial3/0
Router(config-if)#ip address 165.165.165.14 255.255.252.0
Router(config-if)#no shutdown

Router(config-if)#exit
Router(config)#interface Serial6/0
Router(config-if)#ip address 160.160.160.15 255.255.252.0
Router(config-if)#no shutdown

Router(config)#router ospf 1
Router(config-router)#network 151.151.0.0 0.0.255.255 area 1
Router(config-router)#network 156.156.156.0 0.0.3.255 area 1
Router(config-router)#network 165.165.164.0 0.0.3.255 area 1
Router(config-router)#network 160.160.160.0 0.0.3.255 area 1

Router: 04
Router>enable
Router#configure terminal
Router(config)#interface FastEthernet0/0
Router(config-if)#ip address 152.152.152.13 255.255.0.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial3/0
Router(config-if)#ip address 158.158.158.11 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial2/0
Router(config-if)#ip address 170.170.170.15 255.255.252.0
Router(config-if)#no shutdown
Router(config-if)#exit

Router(config)#interface Serial6/0
Router(config-if)#ip address 160.160.160.15 255.255.252.0
Router(config-if)#no shutdown
 Router(config)#router ospf 1
Router(config-router)#network 152.152.0.0 0.0.255.255 area 1
Router(config-router)#network 158.158.156.0 0.0.3.255 area 1
Router(config-router)#network 160.160.160.0 0.0.3.255 area 1
Router(config-router)#network 170.170.168.0 0.0.3.255 area 1

Result: (Command Prompt)

PC0
 PC1

Comment:
The lab demonstrated the successful implementation of OSPF routing in a small network
topology consisting of five routers and five PCs. OSPF allowed the routers to exchange
routing information and calculate the shortest path to reach destination networks. OSPF is a
link-state routing protocol that provides a more scalable and efficient routing solution
compared to traditional distance vector protocols.