Scribd
Upload
5 views

walls

Uploaded by

mmohamedafifii555
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

walls

Uploaded by

mmohamedafifii555
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DATA SHEET

Black Acoustical Board


with ECOSE® Technology

DESCRIPTION
CONTRACTOR: ______________________________________
Black Acoustical Board is a heavy-density mat-faced fiberglass
JOB: _______________________________________________
board insulation bonded with ECOSE Technology. Its base board
DATE: ______________________________________________
is brown with a black mat facing with a smooth, tough surface,
that resists damage during installation and operation.

APPLICATION DOING MORE FOR THE WORLD WE LIVE IN.


ƒ Acoustical insulation and/or a visual barrier on walls and
Knauf Insulation products with ECOSE® Technology are
ceilings, where system design requires a rigid product where
made using our patented, bio-based binder - a smarter
additional strength and abuse resistance are required
alternative to the phenol/formaldehyde (PF) binder
ƒ Typically used where framing members are not present
traditionally used in fiberglass products. The bio-based
binder holds our product together, gives the product its
INDOOR AIR QUALITY
unique appearance and makes it formaldehyde-free.
ƒ UL Environment
ƒ GREENGUARD Certified All of our products are made from sustainable resources,
ƒ GREENGUARD Gold Certified such as recycled glass and sand. And we’re proud to
ƒ Validated to be Formaldehyde-Free be putting glass bottles back to work rather than into
ƒ Does not contain polybrominated diphenyl ethers (PBDE) landfills. Our products are made with a minimum of 50%
such as: Penta – BDE, Octa – BDE or Deca – BDE recycled glass—totaling an average of 26 million bottles
ƒ EUCEB Certified each month.

STORAGE
ƒ Inside storage is recommended. Protect stored Black
Acoustical Board from water damage or abuse. If stored
outside, stack cartons on pallets and cover adequately to
prevent moisture infiltration.

FIBERGLASS AND MOLD


Fiberglass insulation will not sustain mold growth. However,
mold can grow on almost any material when it becomes wet
and contaminated. Carefully inspect any insulation that has
been exposed to water. If it shows any sign of mold it must be NOTES
discarded. If the material is wet but shows no evidence of mold, it When condensation is permitted to occur between nested Black
should be dried rapidly and thoroughly. If it shows signs of facing Acoustical Board and galvanized steel panels, discoloration of the
degradation from wetting, it should be replaced. metal may occur.

TECHNICAL DATA
Property (Unit) Test Performance
Maximum Service Temperature ASTM C411 250° F (121° C)

Mold Growth ASTM C1338, G21, G22 Pass

Water Vapor Sorption (by weight) ASTM C1104 3% or less

Surface Burning Characteristics


ASTM E84, UL 723, CAN/ULC S102 UL Classified FHC 25/50
(flame spread/smoke developed)
SOUND ABSORPTION COEFFICIENTS | ASTM C423, TYPE A MOUNTING
Product Octave Band Center Frequency (cycles/sec.)

Density Thickness 125 250 500 1000 2000 4000 NRC


2.25 PCF (36 kg/m³) 2" (51 mm) 0.26 0.62 1.05 1.07 1.04 1.05 0.95

1" (2 mm) 0.13 0.24 0.56 0.83 0.92 0.98 0.65

3.0 PCF (48 kg/m³) 1½" (38 mm) 0.19 0.41 0.89 1.02 1.03 1.04 0.85

2" (51 mm) 0.33 0.67 1.07 1.07 1.03 1.06 0.95

FORMS AVAILABLE*
Density Thickness R-Value Width Length
2.25 PCF (36 kg/m³) 2" (51 mm) R-8.7

1" (25 mm) R-4.3 24" 48"


(610 mm) (1219 mm)
3.0 PCF (48 kg/m³) 1½" (38 mm) R-6.5

2" (51 mm) R-8.7

*Some products listed may be custom products. All custom product requests require approval from Knauf Insulation, regardless of whether the product has previously been
produced. Special pricing and minimum order quantities will apply.

THERMAL CONDUCTIVITY “C”1 AND RESISTANCE “R”2 | ASTM C177

Mean Temperature 75° F (24° C)

Product Conductance “C” Resistance “R”


2.25 PCF (36 kg/m³) 2" (51 mm) 0.11 (0.62) 8.7 (1.53)
1" (25 mm) 0.23 (1.31) 4.3 (0.76)
3.0 PCF (48 kg/m³) 1½" (38 mm) 0.15 (0.85) 6.5 (1.15)
2" (51 mm) 0.11 (0.62) 8.7 (1.53)

BTU W ft2 ∙ hr ∙ ˚F m2 ∙ ˚C
“C Units” “R Units”
ft ∙ hr ∙ ˚F
2
m ∙ ˚C
2
BTU W
1
The lower the value, the better the performance. 2The higher the value, the better the performance.

CERTIFICATIONS

KNAUF INSULATION, INC.


Check with your Knauf Insulation Territory Manager to ensure information is current.
One Knauf Drive
The chemical and physical properties of this product represent average values Shelbyville, IN 46176
determined in accordance with accepted test methods. The data is subject to normal
manufacturing variations. The data is supplied as a technical service and is subject Technical Support
to change without notice. References to numerical flame spread ratings are not intended
(317) 398-4434 ext. 8727
to reflect hazards presented by these or any other materials under actual fire conditions.
[email protected]
This product is covered by one or more U.S. and/or other patents.
See patent www.knaufnorthamerica.com/patents 01-21

Visit knaufnorthamerica.com to learn more. © 2021 Knauf Insulation, Inc.

You might also like