Scribd
Upload
6 views

OPS676ControllerCE6 SRN140B

Uploaded by

Ion Toderici
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

OPS676ControllerCE6 SRN140B

Uploaded by

Ion Toderici
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Software Release Notes

September 30, 2015

OPS676 Cutting Plotter Controller for CE6000


Version 1.40B Release date: September 30, 2015
! Modification
1. Confirmed the version 1.40 works with the Windows 10.
2. The Readme.txt was corrected for the Windows 10.
3. The Note of Windows XP was deleted from the Readme.txt.
Note: There is no difference for the program file and installer from the version
1.40.

Version 1.40A Release date: December 25, 2013


! Modification
1. Confirmed the version 1.40 works with the Windows 8.1.
2. The Readme.txt was corrected for the Windows 8.1.
Note: There is no difference for the program file and installer from the version
1.40.

Version 1.40 Release date: June 12, 2013


! Modification
1. Some of menus were corrected in the following language.
French, German, Spanish, Portuguese

Version 1.30 Release date: March 13, 2013


! Modification
1. There were incorrect sentences in Chinese.
2. There were incorrect sentences in Russian.
3. There were incorrect sentences in Korean.

Version 1.20 Release date: November 16, 2012


! Modification
1. Corresponded to the Windows 8
Version 1.10 Release date: October 31, 2012
! Modification
1. Corresponded to the USA model of the CE6000.
2. The default page length was corrected.
CE6000-40: 200 cm
CE6000-60/-120: 500 cm

Version 1.03 Release date: September 18, 2012


! Modification
1. The cutting condition could not register in the simple mode.
2. The error message was corrected when the registration mark function was used
in division cutting mode.

Version 1.02 Release date: September 18, 2012


! Modification
1. The “Non” was added to the perforations line settings.
2. The help of “Cutter and Pen” was displayed for the FC8000.
3. There were unnecessary spaces and wrong contents in the help.
4. The controller closed when the enter key is pressed even if the close box is not
selected.
5. The error was displayed when the registration mark boxes were space.
6. The controller was terminated when long media name was specified.
7. The “Language pack installation” message was displayed when the help menu
was opened.
8. The controller was terminated when the long printer driver name was specified.
9. The recommended default value of the step pass was “0” in explanation of help, it
had to be “1”.
10. The "test cut" button of Portuguese was displayed to “Teste de”, it had to be
displayed to “Teste de corte”.

Version 1.01 Release date: September 18, 2012


! Modification
1. The maximum cutting speed was corrected for the CE6000-60.
2. The default page length was corrected.
3. Corresponded to Italian and Portuguese.

Version 1.00 Release date: September 18, 2012


! Initial version

End

You might also like