Teledyne DALSA Falcon4 86M Datasheet
Teledyne DALSA Falcon4 86M Datasheet
Inside the Falcon4 camera is our leading-edge CMOS sensor, which enables high speeds at
very large resolutions. This new production of CMOS sensors builds upon the performance
levels of the earlier generations of Falcon cameras and improves on image quality attributes.
The Falcon4 cameras are compliant with GenICam™ and CameraLink HS™ (CLHS)
Key Features specifications—delivering 12 and 16 bits of data. The M95 thread opening allows for your
• Global shutter and exposure control choice of lens to use.
• Faster frame rates through windowing
• Good NIR response Specifications
• Built-in FPN and PRNU correction
• CLHS and GenICam compliant Resolution 10720 (H) x 8064 (V)
Pixel Rate 1.38 Gpixel / s
Programmability Frame Rate 16 fps, maximum
• Adjustable analog / digital gain and Pixel Size 6 μm x 6 μm
offset Bit Depth 12 bits and 16 bits
• 12 and 16 bit selectable output Lens Mount M95 x 1
• Adjustable integration time and Dynamic Range 56 dB (monochrome) and 50 dB (color) with global shutter
frame rate 62 dB (monochrome) and 54 dB (color) with rolling shutter
• Test patterns and camera diagnostics Exposure Time 100 μs minimum
Size 100 mm (H) x 100 mm (W) x 70.5 mm (D)
Typical Applications Mass < 1 Kg
• Aerial imaging Operating Temp 0 °C to +50 °C, front plate temperature
• Aerial reconnaissance Power +12 V to +24 V DC, Hirose 12-pin circular
• Surveillance Power Dissipation < 35 W
• Machine vision Data Interface CLHS—single C2 7M1, CX4 connector
Regulatory Compliance CE and RoHS
Camera Part Number FA-S0-86M16 (monochrome), FA-S1-86M16 (color)
WWW.STEMMER-IMAGING.COM
Falcon4 86M
Color and Monochrome CMOS Area Scan Cameras
120
50
Mono 80 Mono
30 Blue Blue
Red 60 Red
GreenRed GreenRed
20 GreenBlue GreenBlue
40
10
20
0 0
300 400 500 600 700 800 900 1000 1100 300 400 500 600 700 800 900 1000 1100
Wavelength (nm) Wavelength (nm)
Note: Results have not been adjusted for pixel fill factor.
CAM-TEDA118-11/2018 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document.
H 0.25 A
E 0.06
100 B0.05
M4x0.7 - 6H Z 6 12 B0.25 (18)
(80)
(4X) OPTICAL DISTANCE
(36.5)
IMAGE
±0.2° AREA
100 B0.05
(80)
(70)
(32.7)
50 B0.05
PIXEL 0,0
(7.5)
REFERENCE (70)
(56.3)
(70.5)
M4x0.7 - 6H Z 6
(3X) THIS SIDE
(3X) FAR SIDE
NOTES:
1. UNITS: MILLIMETERS.
2. IMAGE AREA IS ALIGNED TO DATUMS A B & C .
www.teledynedalsa.com
WWW.STEMMER-IMAGING.COM