Scribd
Upload
7 views

Tutorial #4 (4934)

Uploaded by

5zdpdtk7fq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

Tutorial #4 (4934)

Uploaded by

5zdpdtk7fq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tutorial 4 ENGI 4934: MECHANICS OF MATERIALS I

Student name:_____Student No._______,


Due Time: 5:00 PM, June 9, 2020.
Note:
(1) After you finish your work, make PDF file and upload it to the D2l Shell under
“Assessments-Assignments-Tutorial #” by the due date and time indicated.
(2) Later work is not accepted.

Problem: A round brass bar of a diameter d1 = 20 mm has upset ends of diameter d2 = 26 mm


(see figure). The lengths of the segments of the bar are L1 = 0.3 m and L2 = 0.1 m. Quarter-
circular fillets are used at the shoulder of the bar, and the modulus of elasticity of the brass is E =
100 GPa. If the bar lengthens by 0.12 mm under a tensile load P, what is the maximum stress
σmax in the bar?

di 20mm
26mm
d
L 0.3M
Lz 0.1M
E 1006Pa
of 0.12mm

26min22 R 3mm
R dz
g.de
fillets
530.93mm
A If
T mY
A 314.15mm AETRYIN A
Areai
M300mm7_it 2K
tion
Elonga 8 8 g PI 2pL 0.12mm 100 Pa
mpa314.16
40010 m any
530.93T
10M
EAc EAT

0.12 1.3316 10sp P 9,011.55N

on Pf 93947,65 Omar 28.68hPa

Onex Konan
FT Zommmm 0.15 12 1 6
~1~

i Gma 1 6 28.68hPa Gma 45.9 Mpa

You might also like