Scribd
Upload
16 views4 pages

Cutting Mill: 90 MM 0.1 - 20 MM

Uploaded by

pranav.bu.001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views4 pages

Cutting Mill: 90 MM 0.1 - 20 MM

Uploaded by

pranav.bu.001
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CUTTING MILL

C90
≤ 90 mm

< 0.1 – 20 mm
LABINDIA Cutting Mill C90 Cutting Mill
An ideal machine for the sample pretreatment of
heavy metal free RoHS and WEE test. It is always
used to process solid samples in batch or
continuously. For the long fiber and big volume
sample it can process directly and do not need pre-
crush.
Application Fields:
Electronics, Environment, Cement, Agriculture,
etc.,
Typical Sample:
rubber, plastics, garbage, circuit board, wood,
paper board, paper, spice, straw, leather, raw
material, bone, animal feed, cable, plastic, electric
wastes, non- metallic waste, grain , lignite, peat
Working Principle
The cutting mill processes the sample by the strong
cutting and shear force. The sample to be
processed falls into the cutting chamber via the
hopper and is shredded by cutting between rotating
and fixed knives until it passes an attached sieve as
ground product into the collection bucket.
Features and advantages of C90
 Powerful size reduction, even of heterogeneous
mixtures
 The speed is adjustable between 100-3000 rpm,
continuously adjustable
 Final fineness depends on bottom sieve
 Apply to the temperature sensitivity samples due to
the quickly and less heat milling
 Wide range of collection system to meet various
requirement
 Big screen touch panel, human interface, speed
adjustment can be imported by the control panel
 The operation of C Series is quite simple and safe
 The electric safety switch can prevent the device
from being started when the door is open.
 The rotating knife, bottom sieve and hopper can be
easily removed, and re-installed, such designs
greatly facilitate the cleaning of the grinding
chamber.

Easy Operation and Cleaning

 The operation of C series is quite simple and safe. The electric safety switch
can prevent the device from being started when the door is open.
 The anti-splashing design is used for the feed hopper.
 The rotating knife, bottom sieve and hopper can be easily removed and re-
installed, such designs greatly facilitate the cleaning of the grinding chamber

Dust Extraction System


Equipped with crushing dust collection device to prevent cross
contamination.
TECHNICAL DATA (C90)
Feed Feed Size : ≤ 90 mm (60*80 mm)
Final Fineness : 0.1 - 20 mm
Motor Speed : 500 – 3000 rpm/min
Batch Quantity : 5L or 0.2~60kg/h
Collector Capacity : 5 L or 0.5 – 30 L
Sieves : 0.20, 0.50, 1.00, 2.00, 4.00, 6.00, 8.00, 10.00 mm
Rotor : 6-Disc Rotor ; Standard Rotor
Collector : 0.25, 0.5, 1, 3, 5, 30 L
Batch Quantity : 5L or 0.2-60Kg/h
Standards : CE / ISO
Protection : IP
Noise : ≤ 70 dB
Rated Power : 3.0 KW
Power supply : 400-440 V, 50 Hz
Instrument size : (W*D*H) 640*825*1510mm
Packing size : (W*D*H) 900*960*1450mm
Net Weight : 186Kgs

You might also like