School RAMON ENRIQUEZ HIGH SCHOOL Grade Level G10-MAXWELL & G10-THOMAS

Grade 1 to 12
ELECTRICAL INSTALLATION &
Daily Lesson Log Teacher DR. MARVIN B. MANAYAN, Ph.D Learning Area
MAINTENANCE
Teaching date and Time 3:35-4:25 & 4:25-5:05 Quarter 3rd Quarter

Monday Tuesday Wednesday Thursday Friday

I. OBJECTIVES
1. Distinguish the 1. Identify the different 1. Identify the different 1. Identify the purposes 1. Read the given
differences between types of metallic types of non-metallic of conduits in terminologies in line
conduits and fittings. conduits. conduits. electrical installation. with the
2. Promote active 2. Promote active 2. Promote active 2. Promote active 2. Identify the different
involvement in the involvement in the involvement in the involvement in the types of fittings.
class discussion. class discussion. class discussion. class discussion. 3. Promote active
involvement in the
class discussion.

a. Content Standard The learner demonstrates an understanding of the principles in performing roughing-in activities.
b. Performance The learner independently performs roughing-in activities based on the Philippine Electrical Code (PEC) and National Electrical Code (NEC).
Standard
c. MELCS LO 2. Install the wiring devices for floor and ground fault current interrupter based on PEC standards
Install the wiring devices for floor and ground fault current interrupter in accordance with PEC
d. Learning
Competencies w/ TLE_IAEI10WDIIIa-IVj-2 TLE_IAEI10WDIIIa-IVj-2 TLE_IAEI10WDIIIa-IVj-2 TLE_IAEI10WDIIIa-IVj-2 TLE_IAEI10WDIIIa-IVj-2
LC code
II. CONTENT
ELECTRICAL CONDUITS AND ELECTRICAL METALLIC NON-METALLIC CONDUITS PURPOSES OF CONDUITS IN ELECTRICAL FITTINGS
FITTINGS CONDUITS (EMC) (NMC) ELECTRICAL INSTALLATION
 Monday Tuesday Wednesday Thursday Friday

III. LEARNING
RESOURCES
A. References
1. Teacher’s Guide https://www.slideshare.net/ Curriculum Guide in TLE: Curriculum Guide in TLE: Curriculum Guide in TLE: Curriculum Guide in TLE:
pages erictalamisan/electrical- Electrical Installation and Electrical Installation and Electrical Installation and Electrical Installation and
installation-and-maintenance- Maintenance (EIM) Maintenance (EIM) Maintenance (EIM) Maintenance (EIM)
nc-ii-cblm

2. Learner’ N/A N/A N/A

N/A N/A
Materials pages
B. Other Learning Powerpoint Presentation Powerpoint Presentation Powerpoint Presentation Powerpoint Presentation Powerpoint Presentation
Resources Video Presentation: Video Presentation: Video Presentation: Video Presentation: Video Presentation:
https://www.youtube.com/ https://www.youtube.com/ https://www.youtube.com/ https://www.youtube.com/ https://www.youtube.com/w
watch?v=yScMj9gBWG4 watch?v=gkeJzRrwe5k&t=10s watch?v=gkeJzRrwe5k&t=10s watch?v=gkeJzRrwe5k&t=10s tch?v=gkeJzRrwe5k&t=10s
IV. PROCEDURES
Review Greeting! Check Attendance, Greeting! Check Attendance, Greeting! Check Attendance, Greeting! Check Attendance, Greeting! Check Attendance,
Classroom Management, Classroom Management, Classroom Management, Classroom Management, Classroom Management,
Covid- Protocol Covid- Protocol Covid- Protocol Covid- Protocol Covid- Protocol
Motivation Short Video Analysis: The Short Video Analysis: The Short Video Analysis: The Short Video Analysis: The Short Video Analysis: The
students are going to watch a students are going to watch a students are going to watch a students are going to watch a students are going to watch a
short video pertaining on the short video pertaining on the short video pertaining on the short video pertaining on the short video pertaining on the
distinctions between electrical different types of electrical different types of non-metallic purposes of an electrical different fittings.
conduits and fittings. metallic conduits. conduits. conduits.
Url: Url:
https://www.youtube.com/ Url: Url: Url: https://www.youtube.com/
https://www.youtube.com/ https://www.youtube.com/ https://www.youtube.com/ watch?v=yScMj9gBWG4
watch?v=yScMj9gBWG4
watch?v=yScMj9gBWG4 watch?v=yScMj9gBWG4 watch?v=yScMj9gBWG4
Guided Questions: Guided Questions:
Guided Questions: Guided Questions: Guided Questions: 1. Based on a given
1. Based on a video
presented, what is 1. Based on a video 1. Based on a video video, what is
1. Based on a video
conduits? Fittings? presented, what is presented, what is electrical fittings?
presented, what is
2. Did you encounter all electrical metallic non-metallic conduits? electrical conduits? 2. What are the different
conduits? 2. Do you think, non- 2. Based on your electrical fittings?
 Monday Tuesday Wednesday Thursday Friday
of those? 2. Do you think, conduits metallic conduits is understanding, is the 3. Are all of those
3. How those two differs is necessary for necessary for conduits necessary for necessary for the
to each other? electrical wiring electrical wiring electrical wiring installation of an
installation?
4. How does it being installation? installation? electrical wiring
3. What are the
used for electrical 3. What are the different 3. What are the different purposes of an system?
installation? types of electrical types of non-metallic electrical conduits? 4. What would be the
metallic conduits? conduits? 4. What will be the consequences if there
consequence if there is no fittings
will be no conduits considered for the
considered for the installation of an
installation of
electrical wiring
electrical wiring
system? system?

A. Activity VENN’S DIAGRAM CLASSIFICATION CLASSIFICATION THUMBS UP OR THUMBS THUBMS UP OR THUMBS

Based on a short video Given the various pictures of a Given the various pictures of a DOWN! DOWN!
presented, the students are conduits, the students are conduits, the students are Given the pictures projected Given the pictures of various
going to classify the pictures going to classify the pictures on a screen regarding on the electrical materials in general,
going to develop a venn’s
whether the picture falls whether the picture falls practices of the usage of an the students are going analyze
diagram emphasizing the under the category of EMC or under the category of NMC or electrical conduits, the whether those materials will
distinction between electrical not. If it is, the picture may not. If it is, the picture may students are going to thumbs be considered as electrical
fittings and conduits. place the picture into the EMC place the picture into the NMC up if the pictures anchored on fittings. If it is, the students are
column. Otherwise, the column. Otherwise, the the purpose of an electrical going to thumbs up.
picture may place into the picture may place into the conduits. Otherwise, the Otherwise, thumbs down.
NMC column. EMC column. students are going to thumbs
down.
B. Analysis Guided Questions: Guided Questions: Guided Questions; Guided Questions; Guided Questions;
1. Based on your output, 1. Based on the pictures  Based on the pictures
 Based on your output, what 1. Based on your output, describe those given, are you thumbs given, what are the
is fittings? Conduits? describe those pictures that you up? Or down? materials shown?
 How those two differs to pictures that you categorized as NMC. 2. If you thumbs up,  Are all of those
each other? categorized as EMC. 2. How did you conclude what it agrees you? considered as
 How those two similar to 2. How did you conclude that all those pictures 3. Do you think that electrical fittings?
each other? that all those pictures are classified as NMC? picture is anchored on  What are the electrical
 Do you think, those two are are classified as EMC? 3. Describe NMC. the purposes of an fittings?
applicable for installation of 3. Describe EMC. electrical conduits?  How can you judge the
electrical wiring system? 4. If not, what should be materials whether
Justify? done? those will be classified
 Monday Tuesday Wednesday Thursday Friday
5. What will be you basis as electrical fittings?
to conclude that the  Are all of those
practices to consider necessary for the
conduits in electrical installation of an
wiring system is electrical wiring
appropriate? system?
C. Abstraction DEAR: DEAR: DEAR: DEAR: DEAR:
The students are going to read The students are going to read The students are going to read The students are going to read The students are going to read
one at a time the definition of the statements one by one the statements one by one the statements one by one the statements one by one
electrical conduits and system. pertaining on the definition pertaining on the definition pertaining on the purposes of pertaining on the definitions
Afterwards, the discussion and its types of EMC. and its types of NMC. an electrical conduits. and its types of an electrical
follows by giving the Afterwards, the discussion Afterwards, the discussion Afterwards, the discussion fittings. Afterwards, the
distinction between those two follows by giving the follows by giving the follows: discussion will follows by
and asking the students to importance of all types of EMC importance of all types of stating its importance and its
name and describe the in installation of electrical NMC in installation of description.
examples of those two and wiring system. electrical wiring system.
how applicable they are in Types of Electrical Fittings:
installation of electrical wiring Types of EMC: Types of NMC: 1. Hubs
system. 1. Rigid Metallic Conduit 1. Rigid Polyvinyl 2. Nipples
2. Electrical Metallic Chloride Conduits 3. Bushing
Tubing 2. Flexible Electrical Non- 4. Locknuts
3. Intermediate Metallic Metallic Conduits 5. Adaptor
Tubing 6. Connectors
4. Flexible Metallic 7. Elbow
Tubing 8. Bends
9. Couple drain
10. Plastic lids
11. Rubber gasket
12. Saddle clip
13. Rigid coupling
14. Conduit coupling
15. Unions
16. Reducer
 Monday Tuesday Wednesday Thursday Friday

D. Application ESSAY NAME ME! NAME ME! CLASSIFICATION NAME ME!

The students are going to Given the pictures of an Given the pictures of an non- The group of students will be Given the pictures of an
write an essay regarding on electrical metallic conduits, metallic conduits, the students given a chart consisting of a electrical fittings, the students
the distinction between the students are going to are going to name the “YES” and “NO” column, and a are going to name the specific
electrical fittings vs conduits. name the particular types of particular types of NMC. variety of pictures showing the fittings based on the pictures
Also, they are going to justify EMC. practices of the usage of an provided to them.
how those two are applicable electrical conduits, they are
in installation of electrical going to analyze the picture
wiring system. whether if it is anchored on
the idea of the purpose of an
1. How electrical fittings electrical conduits. If it is, the
and conduits differs to picture may place to the “YES”
each other? column. Otherwise, the
2. How electrical fittings picture may place to the “NO”
and conduits are column.
applicable in electrical
wiring installation?

Criteria:
Content  30pts.
Grammar  10pts.
Neatness  10pts.

V. Evaluation
TRUE OR FALSE: IDENTIFICATION IDENTIFICATION TRUE OR FALSE IDENTIFICATION
Read the following statements Given the description stated Given the description stated Read the following statements Read the following statements
comprehensively. Decide below, the students are going below, the students are going comprehensively. Decide comprehensively. Write the
whether the statement is valid to identify the particular types to identify the particular types whether the statement is complete word that describes
or not. If the statement is of EMC. of EMC. anchored on the purposes of by the given statement.
valid, write TRUE. Otherwise, 1. It is being used buried 1. It is a type of NMC an electrical conduits. If it is, 1. t is a threaded fitting
write FALSE. in a concrete. described as it easily write TRUE. Otherwise, write which allows the pipe
1. Electrical fittings and 2. It is applicable in to bend. FALSE. work to be separated
conduits are same to external motor 2. It described as flame and reconnected
each other. terminal only. resistant. without any horizontal
 Monday Tuesday Wednesday Thursday Friday
2. Electrical conduits is movement in the pipe.
optional to be used for 2. It is a kind of pipe
electrical wiring fitting used in process
installation. piping that reduces
the pipe size from a
larger bore to a
smaller bore (inner
diameter).
VI. AGREEMENT
Advance Review: Advance Review: Advance Review: Advance Review: Advance Review:
The students are going to The students are going to The students are going to The students are going to The students are going to
browse over the net browse over the net browse over the net browse over the net browse over the net
pertaining on the video pertaining on the purposes of pertaining on the electrical pertaining on electrical
pertaining on the video
tutorials on how to install an electrical conduits. fittings. wireways and cabletrays.
regarding on electrical metallic electrical system.
conduits.
VII. REMARKS/
REFLECTION

Prepared by: Checked and Mentored by:

MARVIN B. MANAYAN, Ph.D (CAR) MARISSA F. CASTRO

Secondary School Teacher I Master Teacher I