Products Catalogue

Chapter 01 | Rectangular Duct & Fittings 03

General Information & Specification Data 04

Duct Connection System 05
Table of Content
Straight Duct 06
Y - Branch 07
Rectangular Reducer 08
Rectangular Elbow 09
Rectangular to Round Transition 10
Rectangular Offset 11
Rectangular Tee 12
Rectangular Cross 13

Chapter 02 | Round Duct & Fittings 15

General Information & Specification Data 16

Circular Duct 17
Spiral Straight Duct 18
Round End Cap 19
Round Reducer 20
Circular Elbow 21
Round Tee 22
Round Offset 23
Round Take Off 24
Collar Saddle 25

Chapter 03 | Fire Rated Single Wall Duct 27

Rectangular Fire Rated Round 28

Fire Rated Single Wall Duct 29
Fire Rated Round 33
Fire Rated Spiral Duct 34

Chapter 04 | Plenum Box 36

Chapter 05 | Access Door 40

Chapter 06 | Volume Control Damper 42

Chapter 07 | Motorized Volume Control Damper 46

Chapter 08 | Sand Trap Louver 48

Product Catalogue | 01
 Chapter 01

Rectangular Duct & Fittings

 Chapter 01

Rectangular Duct & Fittings

MATERIAL SPECIFICATIONS
All ductwork including duct connectors and accessories are
made of galvanized steel.
Rectangular ducts and fittings are produced as per SMACNA
duct construction standards.
FABRICATION STANDARDS
All ducts, transformation pieces and their respective fittings
are produced using CNC machines.
The accuracy of the duct dimensions, the notch sizes, and C Clip / Drive Clip

the notch location at the duct folding line are all confirmed
using CNC cutters (plasma cutting machines).
Duct edges are all machine treated / handcrafted. Lock formers,
flangers and rollers are used to turn-up the duct edges.
All duct connections, nuts, bolts, gaskets and reinforcements
are included with the ductwork. Duct Mate Corner
Ducts and fittings are available in the sizes and dimensions
required by the customers.
All ducts and fittings are shipped unassembled unless
otherwise specified.
OPTIONS
Ducts and fittings can be supplied in Black Steel, Stainless S Clip
Steel or Aluminium.
They are available in various metal gauges, as per customer’s
request.
Available as well are beaded or stacked ducts.
Cross breaking is available upon request.
Bare or lined ducts are also available.
Available options for Joint connectors are: slip & drive, TDC Duct Mate Flange
or duct mate Flange.
For duct seam construction; Pittsburgh or snaplock are
available.
For fittings seam construction: Pittsburgh or welded are
available.
Pittsburgh lock, available in 26 gauge through 16 gauge, as
per customer’s request.
4 Bolt flange connectors are available for higher static Pittsburgh Lock
pressure systems.
Ducts and fittings can be internally or externally insulated.
Flame retardant option is available.

04 | Product Catalogue | Rectangular Duct & Fittings

Duct Connection System

Hemmed “S” Slip

1200mm (STD, LENGTH)

Drive Slip
Pittsburgh

Beading 210mm O.C.

Galvanized Duct
Galvanized Duct

Hemmed “S” Slip Drive Slip

Slide on Flange
1200mm (STD, LENGTH)

Pittsburgh

Beading @210mm O.C.

Clamp or Duct Cleat

Gasket M10 Bolt
Galvanized Duct

L 50x50x5mm Thk.

1200mm (STD, LENGTH)

Pittsburgh

Pittsburgh Lock Seam

Gasket M10 NUT & BOLT

ANGLE FIXED TO DUCT BY
RIVETS OR WELDING @200 12mm
MAX. SPACING
Galvanized Duct

L 50x50x5mm Thk.

1200mm (STD, LENGTH)

Pittsburgh

Pittsburgh Lock Seam

L 50x50x5mm Thk.
REINFORCEMENT @500mm CENTER TO CENTER

Gasket M10 NUT & BOLT

ANGLE FIXED TO DUCT BY
RIVETS OR WELDING @200 12mm
MAX. SPACING Galvanized Duct

Duct Connection System | Product Catalogue | 05

 Chapter 01

Straight Duct
DESCRIPTION
Rectangular, air distribution channel, designed
for indoor and outdoor applications.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as
per customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Stack duct or beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly.
Available connections: TDC, “S” and “C” clip,
duct mate or angle bar flanged connection.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Straight Rectangular Ducts are available in the
following sizes:
Dimension (mm) Dimension (mm)
W H D W H D
100 100 100 800 800 800
W
150 150 150 850 850 850
200 200 200 900 900 900
L
250 250 250 950 950 950
300 300 300 1000 1000 1000
350 350 350 1050 1050 1050
400 400 400 1100 1100 1100
450 450 450 1150 1150 1150 H
500 500 500 1200 1200 1200
550 550 550 1250 1250 1220
600 600 600 1300 1300
Product Code
650 650 650 1350 1350
700 700 700 1400 1400 EAT GSR - WxH / L
750 750 750 1450 1450 WxH= Width x Hight
L= Length
Continue > 1500 1500
Example: GSR - 300x300/1000
Other Sizes are available upon request.

06 | Product Catalogue | Straight Duct

Y-Branch
DESCRIPTION
Connects different, rectangular, air distribution
channels. The Y-Branch, at it’s ends, has mounting
frames with sheet metal joining profiles.
It is equipped with outer and inner corners and 1
stiffened with transverse sheet corrugation.
Available in various sizes and types.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
2
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Stack duct or beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly.
3
Available connections: TDC, “S” and “C” clip, duct
mate or angle bar flanged connection.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Rectangular Y-Branches are available in the
following sizes:
Dimension (mm) Dimension (mm)
W H L R W H L R
100 100 700 700
150 150 750 750
200 200 800 800
250 250 850 850
Minimum W+R

300 300 900 900

Minimum W+R

W=R

350 350 950 950

W=R

400 400 1000 1000

450 450 1050 1050
500 500 1100 1100
550 550 1150 1150 Product Code
600 600 1200 1200
EAT GRY - W1xH1/W2xH2/W3xH3/L/R/t
650 650 WxH= Width x Height
Continue > L= Length
R=Radius
Other sizes are available upon request. t= Type (1->3)
Example:
GRY - 300x300/300x300/300x300/1000/500/1

Y-Branch | Product Catalogue | 07

 Chapter 01

Rectangular Reducer
DESCRIPTION
Used to connect two rectangular air distribution
channels of a different cross sections.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Cross break added for support.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium. 1 2
The size reduction can be equal and from both sides or
only from one side.
Seam numbers and locations vary depending on the
joint type and size.
Stack duct or beaded duct are available.
Pittsburgh lock construction. 3 4
Delivered knocked down for site assembly.
Available connections: TDC, “S” and “C” clip, duct mate
or angle bar flanged connection.
Flame retardant.
Internal lining.
External insulation (Double Wall).
5

PRODUCT DATA
Rectangular Reducers are available in the following
sizes:
Dimension (mm) Dimension (mm)
W H L W H L
100 100 150 800 800 850
150 150 200 850 850 900
200 200 250 900 900 980
250 250 300 950 950 1000
300 300 350 1000 1000 1050
350 350 400 1050 1050 1100
400 400 450 1100 1100 1150
450 450 500 1150 1150 1200
500 500 550 1200 1200 1220
550 550 600 1250 1250 Product Code
600 600 650 1300 1300
650 650 700 1350 1350 EAT GRR - W1xH1 -> W2xH2 / L / t
700 700 750 1400 1400
WxH= Width x Height
L= Length
750 750 800 1450 1450
t= Type (1->5)
Continue > 1500 1500 Example: GRR-300x300->100x100/40/1
Other sizes are available at request.

08 | Product Catalogue | Rectangular Reducer

Rectangular Elbow
DESCRIPTION
Used to connect two rectangular air distribution channels
of similar cross sections.
Available in various sizes, shapes and angles.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
1
Cross break added for support.

OPTIONS H1
Various Types of Elbows and Bends.
W2
Can be made in Black Steel, Stainless Steel or
Aluminium. A

Stack duct or beaded duct are available. R

Pittsburgh lock construction.
Delivered knocked down for site assembly.
W1
Available connections: TDC, “S” and “C” clip, duct mate
H1
or angle bar flanged connection.
2
Flame retardant.
Internal lining.
External insulation (Double Wall). H1
W2
A
R

PRODUCT DATA W1
H1
Rectangular Elbows are available in the following sizes:
3
45 Degree 90 Degree
Dimension (mm) Dimension (mm)
W H W H
8 8 8 8
10 10 10 10
12 12 12 12
14 14 14 14
16 16 16 16
18 18 18 18
20 20 20 20
22 22 22 22
4
24 24 24 24 Product Code
Other Sizes and angles are available upon request. EAT GRE - W1xH1 -> W2xH2 / R / A / t
WxH= Width x Height
R= Radius (For type 2 & 3)
A= Angle (For type 1,2,3 )
t= Type (1->4)
Example: GRE - 300x300-
>100x100/15/90/3

Rectangular Elbow | Product Catalogue | 09

 Chapter 01

Rectangle to Round Transition

DESCRIPTION
Used to connect a rectangular air distribution
channel to another circular channel.
The fitting enables the design of a ventilation
system with the dimensions freely changeable and
with possible offset in both directions.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 gauge to 26 GI gauge, as per 1
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or 2
Aluminium.
Stack duct or beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly. 3
Available connections: TDC, “S” and “C” clip, duct
mate or angle bar flanged connection.
Flame retardant.
Internal lining.
External insulation (Double Wall). 4

PRODUCT DATA
Rectangular to Round Transitions are available
in the following sizes:
Dimension (inches) Dimension (inches)
W H D W H D
100 100 100 800 800 800
150 150 150 850 850 850
200 200 200 900 900 900
250 250 250 950 950 950
300 300 300 1000 1000 1000
350 350 350 1050 1050 1050
400 400 400 1100 1100 1100
450 450 450 1150 1150 1150
500 500 500 1200 1200 1200
Product Code
550 550 550 1250 1250 1250
600 600 600 1300 1300 1300 EAT GRTR- WxH -> G /L/r/ t
650 650 650 1350 1350 1350 WxH= Width x Height
L= Length
700 700 700 1400 1400 1400
D= Diameter
750 750 750 1450 1450 1450 r= Vertical shift
Continue > 1500 1500 1500 t= Type (1->4)
Example: GRTR - 300x300->100/1000/150/1
Other sizes are available upon request.

10 | Product Catalogue | Rectangle to Round Transition

Rectangle Offset
DESCRIPTION
Used to offset any obstructions to the ventilation
system.
Typical application; change in duct height or at duct
crossing.
The offset is equipped with mounting frames, having
sheet metal joining profiles and stiffened with
transverse sheet corrugation.
Available in various sizes and types.

FABRICATION STANDARDS
Fabricated as per SMACNA standards.
Galvanized steel construction. 1
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
2 3
Stack duct or beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly.
Available connections: TDC, “S” and “C” clip, duct mate
or angle bar flanged connection.
Flame retardant.
Internal lining. 4 5
External insulation (Double Wall).

PRODUCT DATA D
Rectangular Offsets are available
in following sizes:
Dimension (mm) Deviation
W1 W2 H mm
100 100 100 50 L H2 W2
150 150 150 100
200 200 200 150
250 250 250 200
300 300 300 250
350 350 350 300
400 400 400 350
450 450 450 400
500 500 500 450
550 550 550 500
600 600 600 H1 W1
650 650 650
700 700 700 Product Code
750 750 750
800 800 800 EAT GRO - W1xH1 -> W2xH2/L/d/ t
850 850 850 WxH= Width x Height
900 900 900 d= Deviation
950 950 950 t= Type (1->5)
1000 1000 1000 Example: GRO - 300x300->100x300/1000/200/1
Other Sizes are available upon request.

Rectangle Offset | Product Catalogue | 11

 Chapter 01

Rectangular Tee
DESCRIPTION
The T joint is equipped with mounting frames,
having sheet joining profiles and stiffened with
transverse sheet corrugation.
The fitting enables to design a ventilation system 1
with a 90 degree tap.
Available in various sizes and types.

FABRICATION STANDARDS
Fabricated as per SMACNA standards.
2
Galvanized steel construction.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or 3
Aluminium.
Stack duct or beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly.
Available connections areTDC, “S” and “C” clip, duct
4
mate or angle bar flanged connection.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Rectangular Tees are available in the following sizes:
Dimension (mm) Dimension (mm)
W H R W H R
100 100 850 850
150 150 900 900
200 200 950 950
250 250 1000 1000
300 300 1050 1050
350 350 1100 1100
400 400 1150 1150
450 450 R=W 1200 1200 R=W
500 500 1250 1250
550 550 133 133
600 600 1350 1350
650 650 1400 1400
700 700 1450 1450 Product Code
750 750 1500 1500
EAT GRT - W1xH1/W2XH2/W3xH3/R/t
800 800 WxH= Width x Height
Continue > R= Radius
Other types and sizes are available upon t= Type (1->4)
request. Example: GRT - 400x300/300x300/200x300//400/1

12 | Product Catalogue | Rectangular Tee

Rectangle Cross
DESCRIPTION
The rectangular cross is equipped with mounting
frames, having sheet joining profiles and stiffened
with transverse sheet corrugation. 1
It allows for the design of a ventilation system with
90 degree taps.
Available in various sizes and types.

FABRICATION STANDARDS
2
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14GI gauge to 26 GI gauge, as per
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or 3

Aluminium.
Stack duct and beaded duct are available.
Pittsburgh lock construction.
Delivered knocked down for site assembly.
Available connections are TDC, “S” and “C” clip, duct
mate or angle bar flanged connection. 4
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Rectangular Crosses are available in the following
sizes:
Dimension (mm) Dimension (mm)
W H W H
100 100 750 750
150 150 850 850
200 200 950 950
250 250 1050 1050
300 300 1150 1150
350 350 1250 1250
400 400 1350 1350
500 500 1450 1450
600 600 1550 1550
650 650
Continue >

Other types and sizez are available upon

request. Product Code
EAT GRC - W1xH1/W2xH2/W3xH3/W4xH4/ t
WxH= Width x Hight
t= Type (1->4)
Example: GRC - 300x300/300x300/300x300/300x300/1

Rectangle Cross | Product Catalogue | 13

 Chapter 02

Round Duct & Fittings

 Chapter 02

Circular Duct & Fittings

MATERIAL SPECIFICATIONS
All ductwork is made of galvanized steel material.
Various gauges are available upon request.
Circular ducts & fittings and spiral ducts & fittings are
similarly available.

FABRICATION STANDARDS
Single wall duct shell fabrication.
Fabricated as per SMACNA standards.
All fittings, unless noted otherwise, are male sized on
both ends for slip-joint assembly.
Ducts and fittings are available in different lengths, as
per customer’s request.

OPTIONS
Ducts & fittings are available in single wall shell or in
double wall.
Bare or lined ducts are available as well.
Can be made of Black Steel, Stainless Steel or
Aluminium.
Flame retardant.
Internal lining.
Duct shell can be in:
1. Spiral lockseam.
2. Longitudinal seam, or–
3. Fully welded.
Fitting shell can be one of the following options:
1. Standing seam and sealed.
2. Spot welded and sealed.
3. Riveted and sealed.
4. Screwed and sealed.
5. Fully welded.
End connectors options are:
1. Slip coupling.
2. Flange connector.
3. Angle ring.

16 | Product Catalogue | Circular Duct & Fittings

Circular Duct
DESCRIPTION
It is a circular air distribution channel,
manufactured with a lockseam.
All seams are constructed with a spot weld, or
stitch weld.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness: from 14 GI gauge to 26 GI gauge, as per
customer’s request.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Available with flanges or flat rings.
Available with a snaplock.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Circular Ducts are available in the following sizes:
Diameter (mm) Length (mm) Diameter (mm) Length (mm)
100 850
150 900
200 950
250 1000
300 1050
350 Maximum 1100 Maximum
400 122 mm 1150 122 mm
450 1200
500 1250
550 1300
600 1350
650 1400
700 1450
750 1500
800
Continue >
Other Sizes are available upon request. Product Code
EAT GCD - D / L
D= Diameter
L= Length
Example: GCD - 300/1000/1

Round Duct | Product Catalogue | 17

 Spiral Straight Duct
DESCRIPTION
It is a spiral air distribution channel, manufactured
with a spiral lockseam.
All seams are constructed with a gore-lock, spot
weld, or stitch weld.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Available with flanges or flat rings.
Available with a snaplock.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Spiral Ducts are available in the following sizes:
Dimension (in) Dimension (mm)
D Length D Length
4 100
6 150
8 200
10 250
12 300
14 350
16 400
450
18
500
20
550
22 600
24 65
26 700
28
Maximum 6 Meters
Maximum 20 Feets

750
30 800
32 850
34 900
36 950
38 1000
40 1100
42 1200
44 1300
46 1400
48 1500
1600
50
1700
52
1800
54 1900
56 2000 Product Code
58 2100
60 2200 EAT GSPD - D / L
62 2300 D= Diameter
64 2400 L= Length
Other Sizes are available upon request. Example: GSPD - 300/1000

18 | Product Catalogue | Spiral Straight Duct

Round End Caps
DESCRIPTION
Used to cap the end of a circular duct.
Round end cap is manufactured with a lockseam.
All seams are constructed with a gore-lock, spot
weld, or stitch weld.
Available in various sizes

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA Standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer request.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Circular Ducts are available in the following sizes:
Diameter (mm) Length (mm) Diameter (mm) Length (mm)
100 850
150 900
200 950
250 1000
300 1050
350 1100
50 50
400 1150
450 1200
500 1250
550 1300
600 1350
650 1400
700 1450
750 1500
800
Continue >
Other Sizes are available upon request.

Product Code
EAT GREC - D / L
D= Diameter
L= Length
Example: GREC - 500/50

Round End Caps | Product Catalogue | 19

 Chapter 02

Circular Reducer
DESCRIPTION
It is an accessory that fits together two circular
ducts of different diameters.
Available in various sizes and in different cross
sections (Please refer to the graphics).

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
1
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium. 2
Male sized on both ends for slip-joint assembly
with the spiral duct.
Flame retardant.
Internal lining.
External insulation (Double Wall).
3

PRODUCT DATA
Circular Reducers are available in the
following sizes:
Dimension (mm)
D1 D2 L
125 100 150
152 125 200
180 152 250
200 180 300
250 200 350
305 250 400
355 305 450
400 355 500
450 400 550
500 450 600
560 500 650
600 560 700
650 600 750
700 650 800
750 700 850
800 750 900
900 800 950 Product Code
1000 900 1000
1100 1000 1050
EAT GCR - D1->D2/L/t
D1= Diameter 1
1250 1100 1100
D2= Diameter 2
1400 1250 1150 L= Length
1600 1400 1200 t= Type (1->3)
Example: GCR-300->100/500/1
Other sizes are available upon request.

20 | Product Catalogue | Circular Reducer

Circular Elbow
DESCRIPTION
Used to connect two circular air
distribution channels..
Available in various sizes, shapes
and angles.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA
standards.
Thickness : From 14 GI gauge to 26
GI gauge, as per customer’s request.
Single wall duct shell fabrication. Angle 90 Angle 60
Angles: 90, 60, 45, 30 ,15.

OPTIONS
Can be made in Black Steel,
Stainless Steel or Aluminium.
Can be provided in different
gauges, as per customer’s request.
Flame retardant. Angle 45 Angle 30
Internal lining.
External insulation (Double Wall).
Product Code
EAT GCE - D1/D2 /R/A
D1= Diameter 1
D2= Diameter 2
R= Radius
A= Angle
Example: GCE - 300/300/90 Angle 15

PRODUCT DATA
Circular Elbows are available in the following sizes:
Dimension (mm) Dimension (mm)
D (mm) Radius D (mm) Radius
R=1.5D (mm) R=D (mm) R=1.5D (mm) R=D (mm)
100 150 100 700 1050 700
125 187.5 125 750 1125 750
152 228 152 800 1200 800
180 270 180 850 1275 850
200 300 200 900 1350 900
250 375 250 950 1425 950
305 457.5 305 1000 1500 1000
355 532.5 355 1062 1593 1062
400 600 400 1100 1650 1100
450 675 450 1150 1725 1150
500 750 500 1200 1800 1200
560 840 560 1250 1875 1250
600 900 600 1400 2100 1400
650 975 650 1600 2400 1600
Continue >
Other Sizes are available upon request

Circular Elbow | Product Catalogue | 21

 Chapter 02

Round Tee
DESCRIPTION
Connects three circular duct lines of same or different
diameters to form a junction
Available in various sizes and types (please refer to the
graphics)

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request. Shoed 90 Tee
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or Aluminium.
Flame retardant.
Internal lining.
External insulation (Double Wall). Pressed Tee

PRODUCT DATA
Circular Tees are available in the following sizes:
D1 (mm) D2 (mm) D3 (mm)
100 100 100 Twin Bend 90
152 152 152
180 180 180
200 200 200
250 250 250
305 305 305
355 355 355
400 400 400
450 450 450 Shoed 90 Cross
500 500 500
560 560 560
600 600 600
650 650 650
700 700 700
750 750 750
800 800 800
900 900 900
1000 1000 1000
Pressed Cross
1100 1100 1100
1250 1250 1250
1400 1400 1400
1600 1600 1600

Other types and sizes are available upon request.

Product Code
EAT GCT - D1/D2/D3/D4/t
D= Diameter
t= Type (1->4)
Example: GCT - 400/300/400/1

22 | Product Catalogue | Round Tee

Round Offset
DESCRIPTION
Used to offset any obstructions to the ventilation
system. Typical application; change in duct height or in
case of a duct crossing.
The offset is equipped with mounting frames, having
sheet metal joining profiles, stiffened with transverse
sheet corrugation.
Available in various sizes and types.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or Aluminium.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Round Offsets are available in the following sizes:
Dimension (in)
D L d L
100 300 50
150 350 100
200 400 150
250 450 200
300 500 250
350 600 300
400 650 350
450 700 400
500 750 450
550 800 500
600 850 550
650 900 600
700 950 650
750 1000 700 d
800 1050 750
850 1100 800
900 1150 850
950 1200 900
1000 1250 950
1050 1300 1000 D
1100 1350
1150 1400
1200 1450
1250 1500 Product Code
1300 1550
1350 1600 EAT GROO - DxL/d
1400 1650 DxL/d= DiameterX Length/Deviation
1450 1700 d= Deviation
1500 1750 Example: GROO - 300X500/100
Other sizes are available upon request.

Round Offset | Product Catalogue | 23

 Chapter 02

Round Take Off

DESCRIPTION
To be fixed on circular duct.
Fabricated with continuous seam or stitch welding.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Flame retardant.
Internal lining.
External insulation (Double Wall).
Available in various sizes, as per customer’s request.

PRODUCT DATA
Round Take Offs are available in the following sizes:

Dimension (mm)
Diameter Length
100
150
200
250
300
350
400
450
500
550
600
650
Minimum = 100

700
750
800
850
900
950
1000
1050
1100
1150
1200
1250 Product Code
1300
1350 EAT GRTO - D / L
1400 D= Diameter
1450
L= Length
1500
Example: GRTO - 300/150
Other Sizes are available upon request.

24 | Product Catalogue | Round Take Off

Collar Saddle
DESCRIPTION
Fabricated with continuous seam or stitch welding.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Collar Saddles are available in the following sizes:
Dimension (mm)
Diameter (D) Diameter (d) Length
150 100
200 150
250 200
300 250
350 300
400 350
450 400
500 450
550 500
600 550
650 600
700 650
Minimum = 150

750 700
800 750
850 800
900 850
950 900
1000 950
1050 1000
1100 1050
1150 1100
1200 1150
1250 1200 Product Code
1300 1250
1350 1300 EAT GCS - D / d / L
1400 1350 D= Diameter
1450 1400 d= Branch Diameter
1500 1450 L= Length
1550 1500
Example: GCS - 800/500/150
Other sizes are available upon request.

Collar Saddle | Product Catalogue | 25

 Chapter 03

Fire Rated Single Wall Duct

 Chapter 03

Fire Rated Rectangular Duct

DESCRIPTION
Designed for indoor and outdoor installation.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 16 GI gauge, as per
customer’s request.
All the seems are fully welded.
Angle bar frame flanges.

OPTIONS
Can be made in Black Steel.
Stack duct or beaded duct are available.
Delivered knocked down for site assembly.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Rectangular fire rated ducts are available in the
following sizes:
Dimension (mm) Dimension (mm)
W H L W H L

100 100 100 850 850 850

150 150 150 900 900 900

200 200 200 950 950 950

250 250 250 1000 1000 1000

300 300 300 1050 1050 1050

350 350 350 1100 1100 1100

400 400 400 1150 1150 1150

450 450 450 1200 1200 1200

500 500 500 1250 1250 1220

550 550 550 1300 1300

600 600 600 1350 1350

650 650 650 1400 1400

700 700 700 1450 1450

Product Code
750 750 750 1500 1500

800 800 800

EAT GSR-F - WxH / L
WxH= Width x Hight
Continue > L= Length
Example: GSR-F - 300x300/1000
Other Sizes are available upon request

28 | Product Catalogue | Rectangular Fire Rated Duct

Fire Rated Single Wall Duct

L40X40X4mm Thk

FULL WELDED

Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
max 300mm intervals Galvanized Duct
Guage 16 (1.6mm)

10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

0-900 16 Full Welded - 40X40X4

L50X50X5mm Thk

FULL WELDED

Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
max 300mm intervals Galvanized Duct
Guage 16 (1.6mm)

10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

901-1200 16 Full Welded - 50X50X5

Fire Rated Single Wall Duct | Product Catalogue | 29

 Chapter 03

Fire Rated Single Wall Duct

L50X50X5mm Thk

FULL WELDED

L50X50X5mm Thk
REINFORCEMENT
AT 600mm CENTER TO CENTER

Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
max 300mm intervals Galvanized Duct
Guage 16 (1.6mm)
10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

1201-1500 16 Full Welded 50X50X5 @ 600 MAX CC 50X50X5

L50X50X5mm Thk

FULL WELDED

L50X50X5mm Thk
REINFORCEMENT
AT 600mm CENTER TO CENTER
Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at Galvanized Duct

max 300mm intervals Guage 16 (1.6mm)

10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

1501-1800 16 Full Welded 50x50x5 @ 600 Max CC 50X50X5

30 | Product Catalogue | Fire Rated Single Wall Duct

Fire Rated Single Wall Duct

L50X50X5mm Thk

TIE RODS 12MM

TIE RODS LOCATED AT EQUAL
SUBDIVISIONS OF W BUT FULL WELDED
NOT OVER 60” (1524MM)

L50X50X5mm Thk
REINFORCEMENT
AT 600mm CENTER TO CENTER
Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
Galvanized Duct
max 300mm intervals
Guage 16 (1.6mm)
10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

1801-2700 16 Full Welded 50x50x5 @ 600 Maz CC +1 Tie Rod 50X50X5 +1 Tie Rod

L60X60X6mm Thk

TIE RODS 12MM

TIE RODS LOCATED AT EQUAL FULL WELDED
SUBDIVISIONS OF W BUT
NOT OVER 60” (1524MM)

L60X60X6mm Thk
REINFORCEMENT
Casket AT 600mm CENTER TO CENTER

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
Galvanized Duct
max 300mm intervals
Guage 16 (1.6mm)
10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

2701-3000 16 Full Welded 60x60x6 @ 600 Maz CC +1 Tie Rod 60X60X6 +1 Tie Rod

Fire Rated Single Wall Duct | Product Catalogue | 31

 Chapter 03

Fire Rated Single Wall Duct

L70X70X7mm Thk

TIE RODS 12MM

TIE RODS LOCATED AT EQUAL FULL WELDED
SUBDIVISIONS OF W BUT
NOT OVER 60” (1524MM)

L50X50X5mm Thk
REINFORCEMENT
AT 600mm CENTER TO CENTER

Casket

Revlt @ Max 50mm from edge

and Max 200 mm intervals
M10 Nut & Bolt

25 mm long welds at
max 300mm intervals Galvanized Duct
Guage 16 (1.6mm)

10mm Bend out

Max Duct Dimension (mm) US Guage Longitudinal Seam Intermediate Reinforcement Joint Type

3001-4000 16 Full Welded 70x70x7 @ 600 Maz CC +2 Tie Rod 70X70X7 +2 Tie Rod

32 | Product Catalogue | Fire Rated Single Wall Duct

Fire Rated Circular Duct
DESCRIPTION
Designed for indoor & outdoor installation.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 16 GI gauge, as per
customer’s request.
Angle bar frame flanges.

OPTIONS
Can be made in Black Steel .
Beaded to insure stability.
Delivered knocked down for site assembly.
Flame retardant.
Internal lining.
External insulation (Double Wall).

PRODUCT DATA
Circular Fire Rated Ducts are available in the
following sizes:
Diameter (mm) Length (mm) Diameter (mm) Length (mm)
100 850
150 900
200 950
250 1000
300 1050
350 Maximum 1100 Maximum
400 1220 mm 1150 1220 mm
450 1200
500 1250
550 1300
600 1350
650 1400
700 1450
750 1500
800
Continue >
Other Sizes are available upon request.
Product Code
EAT GCD-F - D / L
D= Diameter
L= Length
Example: GCD-F - 300/1000/1

Fire Rated Round | Product Catalogue | 33

 Chapter 03

Fire Rated Spiral Duct

DESCRIPTION
Designed for indoor & outdoor installation.
Manufactured with a spiral lockseam.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 16 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.
Angle bar frame flanges.

OPTIONS
Can be made in Black Steel.
Beaded to insure stability.
Delivered knocked down for site assembly.
Flame retardant.
Internal lining.
External insulation (Double Wall).

34 | Product Catalogue | Fire Rated Spiral Duct

PRODUCT DATA
Spiral Fire Rated Ducts are available in the
following sizes:
Dimension (in) Dimension (mm)
D Length D Length
4 100
6 150
8 200
10 250
12 300
14 350
400 L
16
450
18
500
20
550
22 600
24 65
26 700
28
Maximum 6 Meters
Maximum 20 Feets

750
30 800
32 850
34 900
36 950 D
38 1000
40 1100
42 1200
44 1300
46 1400
48 1500
1600
50
1700
52
1800 Product Code
54 1900
56 2000
58 EAT GSPD-F - D / L
2100
60 2200 D= Diameter
62 2300 L= Length
64 2400 Example: GSPD-F - 300/1000
Other Sizes are available upon request.

Fire Rated Spiral Duct | Product Catalogue | 35

Chapter 04 . A

Plenum Boxes For Ceiling

Diffusers
Plenum Boxes For Ceiling
Diffusers
DESCRIPTION
Used for supply and exhaust of air through
diffusers and grilles.
Available in various Profiles.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14 GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Flame retardant.
A- Type (Surface Mount)
Internal lining. and B Type (lay in)
External insulation (Double Wall).
Cross breaking to insure stability.
Optional volume damper.
Different mounting options: Type A = Surface
mounting; Type B = Lay in; Type C = Concealed
mounting.
Optional mounting flange available for type A only.
C- Type (Concealed Mount)

PRODUCT DATA
Plenum Boxes are available in the
following sizes:
Dimension (mm)
W X L

150 100 300

200 150 350

250 200 400

300 250 450

350 300 500

Product Code
EAT GCPB -W / L / D
400 350
W= Width
400
L=Length
D= Diameter
Example: GCPB - 500/500/300
Other Sizes are available upon request.

Plenum Boxes For Ceiling Diffusers | Product Catalogue | 37

Chapter 04 . B

Plenum Boxes For Slot

Diffusers
Plenum Boxes For Slot Diffusers
DESCRIPTION
Used for supply and exhaust of air through
diffusers and grilles.
Available in various Profiles.

FABRICATION STANDARDS
Galvanized steel construction.
Fabricated as per SMACNA standards.
Thickness : From 14GI gauge to 26 GI gauge, as per
customer’s request.
Single wall duct shell fabrication.

OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
Flame retardant. A- Type (Surface Mount)
Internal lining. and B Type (lay in)
External insulation (Double Wall).
Cross breaking to insure stability.
Optional volume damper.
Different mounting options: Type A = Surface
mounting; Type B = Lay in; Type C = Concealed
mounting.
Optional mounting flange available for type A only.
C- Type (Concealed Mount)

PRODUCT DATA
Plenum Boxes are available in the following sizes:

Dimension (mm)
d
W H D L
100 200 100 500
150 250 150 550
200 300 200 600
250 350 250 650 L
300 400 300 700 L W
D
350 450 350 750
400 500 400 800
850
950
W
1000
600 d
650
700
750 Product Code
800
EAT GSPB -WxH / L / D / t
850
WxH= Width x Height
900
L=Length
950 D= Diameter
1000 t= Type of profile (A,B,C)
Example: GSPB - 100x250/650/A
Other sizes are available upon request.

Plenum Boxes For Slot Diffusers | Product Catalogue | 39

Chapter 05

Access Door
Access Door
DESCRIPTION
The Access Door has been designed to allow easy
and convenient access to equipment or any other
component within ductwork.
Two types of access doors are available:
1- Hinged Type
2- Cam Type

STANDARD CONSTRUCTION
Galvanized steel construction.
Fabricated as per SMACNA standards.
The frame and the door panel are in galvanized steel
with thickness ranging from 14 GI gauge to 26 GI
gauge.
1’’ inch fiber glass insulation.
Synthetic gasket.
Mill Finish.
Hinged Type
OPTIONS
Can be made in Black Steel, Stainless Steel or
Aluminium.
2’’ inch fibre glass insulation..
Flame retardant.
Internal lining.
External insulation (Double Wall).

Cam Type

PRODUCT DATA
Access Doors are available in the following
dimensions:
Dimension (mm) Duct Opening
W H W H
6 6 5 1/4 5 1/4
8 8 7 1/4 7 1/4
10 10 9 1/4 9 1/4
12 12 11 1/4 11 1/4
14 14 13 1/4 13 1/4
16 16 14 1/4 14 1/4
18 18 17 1/4 17 1/4 Product Code
20 20 19 1/4 19 1/4 EAT GAD - WxH /d/ t
24 24 23 23 WxH= Width x Height
t= Type (1-2)
Example: GAD - 300x300/25/1
Other sizes are available also upon request.

Access Door | Product Catalogue | 41

Chapter 06 . A

Volume Control Damper

Circular Volume Control Damper
DESCRIPTION
Empower Air Technology control dampers are designed
to control the air flow within the air distribution
installation.
They are suitable for flanged or spigoted connection
within square, rectangular, circular or flat oval duct
systems.
Mechanically or electrically controlled as per customer’s
request.

CIRCULAR DAMPERS FABRICATION STANDARDS

Constructed of galvanized steel as per SMACNA
Standards.
The frame of the damper is 200 mm wide.
The frame thickness ranges from 16 GI gauge to 20 GI
gauge, as per customer’s request.
The blade thickness is in conformity with the thickness
of the damper body. The thickness of the blade ranges
from 16 GI gauge to 20 GI gauge.

OPTIONS
Manual hand quadrant.
Electric Actuator.
Sleeves if requested by client. D
Seals for blades and frame.
Opposed or parallel blades construction.
Heavier Gauges if required.
Special Finishes.

NOTE
Dampers larger than one single section will be produced in several
sections of equal size.
The multi- section dampers may be factory assembled or delivered
in separate sections for field assembly.
Multi- section dampers are equipped with couplers or factory
installed jackshaft to insure the synchronized operation of all the
sections.

PRODUCT DATA FOR ROUND VOLUME DAMPER

Minimum and maximum sizes for round volume damper:
Minimum Maximum
Single Section Single Section
4” (102) dia. 20” (508) dia. Product Code
D= Diameter for round dampers
Example: VCD-R - 300

Volume Control Damper | Product Catalogue | 43

Chapter 06 . B

Volume Control Damper

Rectangular Volume Control Damper
DESCRIPTION
Empower Air Technology control dampers are designed
to control the airflow within the air distribution
installation.
They are suitable for flanged or spigoted connection
within square, rectangular, circular or flat oval duct
systems.
Mechanically or electrically controlled, as per customer’s
request.

RECTANGULAR DAMPERS FABRICATION STANDARDS

Constructed of galvainazed steel as per SMACNA
standards.
The frame of the damper is 200 mm wide.
The frame thickness ranges from 16 GI gauge to 20 GI
gauge, as per customer’s request.
The blade thickness is in conformity with the thickness of
the damper body.
The thickness of the blade ranges from 16 GI gauge to 20
GI gauge.
H

OPTIONS
Manual hand quadrant .
Electric Actuator.
W
Sleeves if requested by client. 200
Seals for blade and frame.
Opposed or parallel blades construction.
Heavier Gauges if required.
Special Finishes.

PRODUCT DATA - RECTANGULAR VOLUME DAMPER

Minimum and maximum sizes for single and multi section rectangular volume damper:

Height (mm) Blades Height (mm) Blades Minimum Maximum

Single Section Single Section
100 700
100 1200
150 750
200 Single 800 Four
250 850
300 900
350 950
400 Two 1000
450 1050 Five
500 1100
550 1150 Product Code
Three
600 1200 Six EAT VCD - WxH
650 WxH= Width x Height
Example: VCD - 300x300
Continue >

Volume Control Damper Rectangular | Product Catalogue | 45

Chapter 07

Motorized Volume
Control Damper
Motorized Volume Control Damper
DESCRIPTION
Designed to control the airflow within air distribution
installation.
They are suitable for flanged or spigoted connection
within square, rectangular, circular or flat oval duct
systems.
Electrically adjustable.

FABRICATION STANDARDS
Motorized dampers constructed of galvanized steel
as per SMACNA Standards.
The Frame of the motorized damper is a deep
channel, 200 mm wide.
The Frame thickness is 18 GI gauge. D
The damper blades are of galvanized steel in 3V
1
shape.
The blade metal thickness is about 16 GI gauge.
H
OPTIONS
Sleeves if requested by client.
Seals for blades and frames.
Opposed or parallel blades construction.
W
Heavier Gauges if required. 200
Special Finishes.
2

PRODUCT DATA FOR MOTORIZED RECTANGULAR VOLUME DAMPER

Minimum and maximum sizes for single and multi section rectangular volume damper:
Minimum Maximum
Single Section Single Section Multipler Section
Single Blade Two Blades
48”X72” 69”X144”
(Parallel) (Parallel or Opposed)
(1219X1829) (2438X3658)
6”X4” (152X102) 8”X10” (203X254)

NOTE
Dampers larger than one single section will be produced in several sections of equal size.
The multi-section dampers may be factory assembled or delivered in separate sections for
field assembly.
The multi-section dampers are equipped with couplers or factory installed jackshaft to
ensure the synchronized operation of all the sections.

PRODUCT DATA FOR MOTORIZED CIRCULAR VOLUME DAMPER

Minimum and maximum sizes for round Product Code
volume damper: EAT MVCD - WxH-D/t
Minimum Maximum WxH= Width x Height
D= Diameter for round dampers
Single Section Single Section t= Type
4” (102) dia. 20” (508) dia. Example: MVCD - 300x300/1

Motorized Volume Control Damper | Product Catalogue | 47

Chapter 08

Sand Trap Louver

Sand Trap Louver
DESCRIPTION
Sand Trap Louvers are applied to protect HVAC
equipment and air distribution installations that are
exposed to sandy weather to high level industrial
pollution.
Designed to separate large particles at low air
velocities and to avoid excessive dust loading on
conventional plant filters.

FABRICATION STANDARDS
Galvanized steel frame, thickness 16 GI gauge.
Galvanized steel, vertical mounted blades,
thickness 16 GI gauge.
Removable aluminium bird screen.
Mill Finish.
H
W
OPTIONS
Insect screen.
Product Code
Available in various dimensions and metal thickness.
Flanged Frame. EAT STL - WxH
Aluminium Washable Filter. WxH= Width x Height
W= Width
Special finishes if requested. H= Height
Example: STL - 300x300

SINGLE SECTION
Minimum (mm) Maximum (mm)
Single Section Single Section
150X150 2000X2000
Multi sections must be done for larger sizes
depending on the size of the louver.

Single Section

Multi-sections.

Sand Trap Louver | Product Catalogue | 49

Notes
Notes
Jeddah Factory

290, 22846, Saudi Arabia

Metal Artwork Saudi Co.

Premco Ready Mix

Empower Air Technologies

National Institute
Bahra Cables Factory
of Technology CPC Industrial Estate

Riyadh Factory
Al Shaheen Metal Industries
24.516721, 46.905308 Saudi Arabia

MMP Group
Al
Kh
arj
Ro
ad
Empower Air Technologies
Saudi Ceramics

Saudi Aramco
Riyadh Refinery

Panda Store Saneiya

Jeddah Factory Riyadh Factory

+966 12 228 4600 +966 11 406 5906
Member of Group

+966 12 694 9459 126902 Jeddah 21352, KSA empower-airtech.com “Your Complete Building Solution”