Translated from Chinese (Simplified) to English - www.onlinedoctranslator.

com

Car electrical appliances BYDe6Repair Manual

Section 6 Multimedia System

Component Location

System Block Diagram

Circuit Schematic

System Overview

Diagnostic Process

Fault Symptom Table

ECUTerminals

Comprehensive diagnostic process

Preparing tools

Disassembly and Installation

241
 Car electrical appliances BYDe6Repair Manual

1. Component Location

242
Car electrical appliances BYDe6Repair Manual

243
 Car electrical appliances BYDe6Repair Manual

* 1：Standard type

* 2: Luxury

244
 Car electrical appliances BYDe6Repair Manual

2. System Block Diagram

245
 Car electrical appliances BYDe6Repair Manual

3. Circuit Schematic Diagram

246
Car electrical appliances BYDe6Repair Manual

247
Car electrical appliances BYDe6Repair Manual

248
Car electrical appliances BYDe6Repair Manual

249
Car electrical appliances BYDe6Repair Manual

250
Car electrical appliances BYDe6Repair Manual

251
Car electrical appliances BYDe6Repair Manual

252
Car electrical appliances BYDe6Repair Manual

253
Car electrical appliances BYDe6Repair Manual

254
 Car electrical appliances BYDe6Repair Manual

4. Multimedia System Overview

warn:DVDThe playback host is realized by laser beam. Radioactive leakage may cause danger. Please be sure to operate according to the instructions.

do.
This multimedia system is a series of products that combines digital imaging and multi-machine integration, turning your car into a small mobile video player.

The audio theater is perfect for playing audio and video discs, watchingTV, or listenAM/FMRadio, use car phone, smartGPSnavigation,

All meet your requirements perfectly.

Main components:

● Multimedia host

● Central control panel

● Car phone

● Multi-function steering wheel

● External amplifier

● Speakers (two tweeters, two front door mid-woofers, two rear speakers)

● Car TV module

● Glass printed antenna and antenna feeder

● Antenna amplifier

●GPSantenna
1. DVDHost Overview

1). DVDThe player uses a laser to scan the digital signal engraved on the disc and transmit the signal to other media components for playback.

hint:
● Do not disassemble any components of the host

● Do not insert any12Something outside the centimeter standard disc

2).Available CDsDVD Video,DVD Audio,multimediaDigital Audio,multimedia-TEXT,MP3,WMAgrid

CD
3).CD cleaning

hint:Do not use lens cleaning fluid, as this mayDVDThe host is affected.

If dust is on the disc surface, wipe it with a soft, dry cloth such as an eyeglass cloth, moving radially outward from the center of the disc.

hint:Pressing the disc with your hands or wiping it with a hard cloth may scratch the surface of the disc.

2. MP3/WMAFile playback
1). PlayableMP3document

2). PlayableWMAdocument

3). file name

● Only files with the extension ".mp3" ".wap"The file format can be recognized and played.

● From now on it will be called “.mp3" ".wap"Save the file

hint:If notMP3orWMAAfter the file name".mp3"".wma"Save, it will bemp3,wmaDocument Identification

255
 Car electrical appliances BYDe6Repair Manual
If the sound is not played, it may generate noise or even damage the speaker.

3.Radio Description

1). Radio Band

Radio band:

AM:522KHz~1620KHz
FM:87.5MHz~108.0MHz
FMandAMThe broadcast range varies greatly, sometimesAMCan be received clearly, butFM(Stereo) Can't receive,

FMThe (stereo) service area is smaller and more susceptible to static or other types of interference (e.g. noise).

2).Radio reception problem

hint:In addition to stereo, there are other problems such as "phase modulation", "multi-path" and "sound fading". These problems are not caused by electronic noise.

It is not caused by sound, but a problem with the transmission and reception of the signal itself.

i. phase modulation

AMBroadcasting is easily affected by electromagnetic or other interference, which can cause phase modulation. Phase modulation usually occurs at night when vehicles receive the same broadcast.

There are two signals from the source, one is reflected back by the ionosphere, and the other is received directly from the source.

ii.Multi-path interference

Multipath interference occurs when a vehicle receives two signals from the same source, one directly from the source and one from the

Reflected from buildings, mountains or other obstacles.

256
 Car electrical appliances BYDe6Repair Manual

iii.Signal attenuation

Signal attenuation is caused by large obstacles (buildings, mountains, etc.) between the transmitting source and the receiving radio, which reflect part of the signal.

Deviation results in a reduction in signal wave energy, making high-frequency signals more easily blocked and low-frequency signals more permeable.

257
 Car electrical appliances BYDe6Repair Manual

5. Diagnostic Process

1 Drive the car into the repair shop

NEXT

2 Check battery voltage

Standard voltage value:

11~14V

If the voltage is lower than11V, please charge or replace the battery before proceeding to the next step.

NEXT

3 Refer to the fault symptom table

result conduct

Fault not in symptom table A

Fault in symptom table B

B Go to5step

4 Comprehensive analysis and diagnosis

On-vehicle inspection;

examineECUTerminal.

NEXT

5 Adjust, repair or replace

NEXT

6 Confirmation Test

NEXT

7 Finish

258
Car electrical appliances BYDe6Repair Manual

259
 Car electrical appliances BYDe6Repair Manual

VI. Fault Symptom Table

Fault symptoms Possible sites of occurrence

1.Host power circuit

Unable to open the system
2.Multimedia Host

1.Steering wheel switches

Steering wheel switch does not work 2.Multimedia Host

3.Wiring
1.speaker
2.External Amplifier
No sound from the speaker
3.Multimedia Host
4.Wiring
1, Check the wiring harness

Amplifier not detected 2, External Amplifier

3, Multimedia Host

1.speaker
Noisy or poor sound quality 2.Multimedia Host
3.External Amplifier

1.Multimedia Host
onlyDVDNo sound in mode 2.External Amplifier

2.Wiring
1.Speaker Circuit
2.Multimedia host to external power amplifier circuit
Poor sound quality in all modes (volume too low)
3.External Amplifier

4.Multimedia Host

1.Lighting system (see Lighting system)

The backlight of the central control panel is not on 2.Multimedia Host

3.Wiring
The radio has no signal (or very poor signal) 1.Skip to "Radio has no signal (or very poor signal)"
1.CD
Disc cannot be inserted or ejected 2.Multimedia Host
3.Wiring
1. TVGlass Printed Antenna

2.Antenna amplifier
TVThe signal is poor or the picture is not clear
3.Multimedia Host
4.Wiring
1.Skip to "Play Disc Skip"
Play CD and skip
2.Multimedia Host

1.Multimedia Host
Black display 2.Central control panel

3.Wiring
1.Multimedia Host
Touch screen failure 2.Central control panel

3.Wiring

260
 Car electrical appliances BYDe6Repair Manual
1. GPS SDCard
2.Multimedia Host
The navigation screen is shaking or the image is not clear
3. GPSantenna
4.Wiring
1. GPS SDCard
Incorrect navigation position on the display
2.Multimedia Host

261
 Car electrical appliances BYDe6Repair Manual

seven,ECUTerminals

1.Check the multimedia hostECUTerminals

i. From the multimedia host backendG81Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G81-3 Y/R ACCSignal input (+12V） ACCelectricity 11~14V

G81-4 R/G Vehicle constant power input Always 11~14V
G81-7 B Power Ground Always Less than1Ω

G81-8 R Antenna power supply Play Radio 11~14V

G81-9 Y/R television/XMpower supply —— ——
ii.From the multimedia host backendG82Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G82-14 R/B steering wheelDA2,Audio control switch —— ——

G82-15 W/B Steering wheel button signal ground Always Less than1Ω

iii.From the multimedia host backendG83Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G83-1 Y/W External audio input interfaceAUX_GND Always Less than1Ω

G83-2 Y/B External audio input interfaceAUTO L —— ——

G83-3 Y/R External audio input interfaceAUX_R —— ——
G83-8 V Complete vehicleCANbusL Always about2.5V

G83-9 P Complete vehicleCANbusH Always about2.5V

G83-10 R steering wheelDA0, phone and video switches —— ——

G83-12 G/R Audio output ground/SPDIF GND Always Less than1Ω

G83-13 O SPDIF_OUT+Audio Output —— ——

G83-14 B NAVI_OUT+Audio Output —— ——
G83-15 L USBGround wire (iPod） Always Less than1Ω

G83-16 B/R USBData SignalUSBP（iPod） —— ——

G83-17 G/R USBData SignalUSBM（iPod） —— ——
G83-18 SB USBPower Output (iPod） —— ——
262
 Car electrical appliances BYDe6Repair Manual
G83-19 Y/B Car TV audio ground Always Less than1Ω

G83-20 Y/R Car TV right channel input —— ——

G83-21 Y/G Car TV left channel input —— ——
G83-22 Y/W TV audio shielding ground Always Less than1Ω

G83-29 L/O SPDIF_OUT -Audio Output —— ——

G83-30 L NAVI_OUT -Audio Output —— ——
iv.From the multimedia host backendG84Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G84-1 R Video signal three primary colorsR —— ——

G84-2 G Video signal three primary colorsG —— ——
G84-3 W Video signal three primary colorsB —— ——
G84-4 L Video signal field frequency —— ——
G84-5 B/R Video signal line frequency —— ——
G84-6 LG touchscreenTSXMSignal —— ——
G84-7 O touchscreenTSXPSignal —— ——
G84-8 B LCD power ground Always Less than1Ω

G84-9 W/B LCD screen power supply12VOutput —— ——

G84-10 Y/B ledThe positive pole of the night light power supply is output to the LCD —— ——
G84-11 B 1Foot video signal shielding ground Always Less than1Ω

G84-12 Y/R 2Foot video signal shielding ground Always Less than1Ω

G84-13 W/R 3Foot video signal shielding ground Always Less than1Ω

G84-14 Y/G 4Foot video signal shielding ground Always Less than1Ω

G84-15 Y/L 5Foot video signal shielding ground Always Less than1Ω

G84-16 W/B Video signal ground Always Less than1Ω

G84-17 B Touch screen signal shielding ground Always Less than1Ω

G84-18 G touchscreenTSYMSignal —— ——
G84-19 G/R touchscreenTSYPSignal —— ——
G84-20 P Communicate with LCD screenCAN_MH Always about2.5V

G84-21 V Communicate with LCD screenCAN_ML Always about2.5V

G84-22 W/B ledThe negative pole of the night light power supply is output to the LCD —— ——
v.From the multimedia host backendG85Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G85-1 R TV video signal ground Always Less than1Ω

G85-2 L TV video signal input —— ——

G85-3 Y Right front camera video signal input —— ——
G85-4 O Reversing camera video signal input —— ——
G85-9 W TV video signal shielding ground Always Less than1Ω

G85-10 B Right front camera video signal shielding ground Always Less than1Ω

G85-11 W Right front camera video signal ground Always Less than1Ω

G85-12 SB Reversing camera video signal ground Always Less than1Ω

G85-13 GR Reversing camera video signal shielding ground Always Less than1Ω

263
 Car electrical appliances BYDe6Repair Manual
vi.From the multimedia host backendG86Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

G86-1 R IPODVideo signalCVBSenter —— ——

G86-2 Y/O Bluetooth microphone signalMIC Penter —— ——
G86-3 W/B Bluetooth microphone signal shielding ground Always Less than1Ω

G86-4 W Emergency SOS Microphone SignalMIC_Penter —— ——

G86-6 B SOSModule Ground Always Less than1Ω

G86-7 R iSystem speakersOUT_L+Output —— ——

G86-8 P isystemCANbusH Always about2.5V

G86-9 V isystemCANbusL Always about2.5V

G86-10 G Reverse signal input —— ——

G86-11 G Parking signal input —— ——
G86-12 R Reversing camera power supply —— ——
G86-13 B Reversing camera power ground Always Less than1Ω

G86-14 R Right front camera power supply —— ——

G86-15 G ISystem backup power input —— ——
G86-16 R/B Button backlight positive —— ——
G86-17 B IPODVideo signal ground Always Less than1Ω

G86-18 W/B IPODVideo signal shielding ground Always Less than1Ω

G86-19 L/O Bluetooth microphone signalMIC_Nenter —— ——

G86-20 G Emergency SOS Microphone SignalMIC_Nenter —— ——
G86-21 B Emergency call microphone signal shielding Always Less than1Ω

G86-23 B/W iSystem speakersOUT_L-Output —— ——

G86-24 R/G ALARMIndicator light output —— ——
G86-25 R/L CallIndicator light output —— ——
G86-26 R/W Emergency call input —— ——
G86-27 R/B Service call input —— ——
G86-28 G Vehicle speed signal input —— ——
G86-30 B Right front camera power ground Always Less than1Ω

G86-31 Y iSystem backup power ground Always Less than1Ω

G86-32 R Button backlight negative —— ——

2.Check the external amplifierECUTerminals

i. From the back end of the external amplifierM35Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

M35-1 R/W Changdian Always 11~14V

M35-2 R/W Changdian Always 11~14V
264
 Car electrical appliances BYDe6Repair Manual
M35-4 P CAN-H Always about2.5V

M35-5 V CAN-L Always about2.5V

M35-6 R/B ACCelectricity superiorACCelectricity 11~14V

M35-7 B NAVI+ —— ——
M35-11 Y/R Center speakerCT+ —— ——
M35-12 B land Always Less than1Ω

M35-13 B land Always Less than1Ω

M35-15 O SPDIF+ —— ——
M35-16 LO SPDIF- —— ——
M35-17 G SPDIF GND Always Less than1Ω

M35-18 L NAVI- —— ——
M35-22 W Center speakerCT- —— ——
ii.From the back end of the external amplifierM37Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

M37-1 SB SubwooferWF1+ —— ——
M37-2 Br SubwooferWF2+ —— ——
M37-3 R/W Right rear door speaker, right rear tweeterRR+ —— ——
M37-4 L Left rear door speaker, right rear tweeterLR+ —— ——
M37-5 R Right front door speaker, instrument panel left speakerRF+ —— ——
M37-6 Y Left front door speaker, instrument panel left speakerLF+ —— ——
M37-7 LG SubwooferWF1- —— ——
M37-8 P SubwooferWF2- —— ——
M37-9 B/W Right rear door speaker, right rear tweeterRR- —— ——
M37-10 G Left rear door speaker, left rear tweeterLR- —— ——
M37-11 B Right front door speaker, instrument panel left speakerRF- —— ——
M37-12 O Left front door speaker, instrument panel left speakerLF- —— ——
3.examineTV ECUTerminals

i. fromTVrear endM34Connector leads, check each pin.

Terminal No. Line Color Terminal Description condition Normal value

M34-1 O Changdian Always 11~14V

M34-3 Y/R ACC superiorACCelectricity 11~14V
M34-6 V CAN-L Always about2.5V

M34-7 P CAN-H Always about2.5V

M34-8 R Video Always Less than1Ω

M34-9 Y Video output pinV_Y —— ——

M34-11 B Power Ground Always Less than1Ω

M34-20 Y/B Audio Always Less than1Ω

265
 Car electrical appliances BYDe6Repair Manual
M34-21 Y/R Audio output pinTV_R —— ——
M34-22 Y/G Audio output pinTV_L —— ——

266
 Car electrical appliances BYDe6Repair Manual

8. Comprehensive Diagnosis Process

1.Unable to open the system

1).Check steps:

1 On-vehicle inspection

i. Turn the power level up toACCfiles.

ii.Check whether the multimedia host is turned on (whether there is a display on the display) .
OK: The display shows something and the buttons respond normally.

OK System normal

NG

2 Check the center console

i. Temporarily replace a normal central control panel (including multimedia display)

ii.Repeat steps1On inspection.

OK: The display shows something and the buttons respond normally.

OK Replacement of the central control panel

NG

3 Check the multimedia host power circuit

OK：Circuit is normal

OK

4 Check the multimedia host

i. Temporarily replace a normal multimedia host.

ii.Repeat steps1On inspection.

OK: The display shows something and the buttons respond normally.

OK Replace multimedia host

NG

267
 Car electrical appliances BYDe6Repair Manual
5 Check the circuit from the center console to the multimedia host

268
 Car electrical appliances BYDe6Repair Manual
2.Steering wheel switch does not work

1). Check steps:

1 Check the multimedia host

Temporarily replace a normal multimedia host and check whether the steering wheel switch is effective.

OK: The steering wheel switch is effective.

OK Replace multimedia host

NG

2 Check the steering wheel switch

Temporarily replace a normal steering wheel switch and check whether the steering wheel switch works.

OK: The steering wheel switch is effective.

OK Replace steering wheel switch

NG

3 Check the circuit from the steering wheel switch to the multimedia host

3.No sound from the speaker in all modes

1). Check steps:

1 Adjust volume settings

Turn up the volume and the sound effect will return to the initial value.

NEXT

2 Check the speakers

i. Turn on the speaker and adjust the mode to one with sound output (such as multimedia CD,TV,mp3,AM,FM） .
ii.Check if there is sound from each speaker.

Check the results conduct

No sound from some speakers A

No sound from all speakers B

A Go to the corresponding speaker to the external amplifier

269
 Car electrical appliances BYDe6Repair Manual

3 Check the external amplifier power circuit

Go to the corresponding external amplifier power circuit

OK：Circuit is normal

OK

4 Check the external amplifier

Temporarily replace a normal external amplifier and check whether the fault is eliminated.

OK: Fault eliminated.

OK Replace the external amplifier

NG

5 Check the circuit from external amplifier to multimedia host

Go to external amplifier to multimedia host circuit

OK：Circuit is normal

OK

6 Replace multimedia host

4.Noisy or poor sound quality

1). Check steps:

1 On-vehicle inspection

Make sure there is no external electromagnetic interference around, and compare the sound effects with other cars of the same model to see if they are the same.

OK: The sound effects are the same.

OK System normal

NG

2 Check the speakers

Check whether the sound effects of each speaker are normal.

270
 Car electrical appliances BYDe6Repair Manual
Check the results conduct

Some speakers do not sound properly A

All speakers sound malfunctioning B

A Replace the speaker that is not sounding properly

3 Check the external amplifier

Temporarily replace a normal external amplifier and check whether the fault is eliminated.

OK: Fault eliminated.

OK Replace the external amplifier

NG

4 Check the circuit from external amplifier to multimedia host

Go to external amplifier to multimedia host circuit

OK: The circuit is normal.

OK

5 Replace multimedia host

5.onlyDVDNo sound in mode

1). Check steps:

1 On-vehicle inspection

i. Turn the power level up toACCfiles.

ii.Turn on the multimedia host system and change the modeDVDmode and check if there is sound.

iii.Change the mode to another mode with sound output and check whether there is sound.

Check the results conduct

DVDMode has no sound, other modes have sound A

DVDMode has no sound, other modes also have no sound B

B Switch to all modes and the speaker is silent

271
 Car electrical appliances BYDe6Repair Manual

A Replace multimedia host

6.Poor sound quality in all modes (volume too low)

1). Check steps:

1 On-vehicle inspection

Turn on the sound system and adjust the sound effects.

OK: The sound quality returns to normal.

OK System normal

NG

2 Compare the sound effects of the same model of cars

Compare the car with another normal-sounding car of the same model to check the difference.

OK: The effect is not much different.

OK System normal

NG

3 Replace the external amplifier

7.Disc cannot be inserted or ejected

1). Check steps:

1 Check the disc

i. Make sure the disc is formatted correctly.

ii.Check the disc for damage such as deformation, corrosion, or cracks.

OK: The disc is normal.

NG Damaged disc

OK

2 Cleaning the disc

272
 Car electrical appliances BYDe6Repair Manual

i. Use a soft cotton cloth to wipe the disc radially from the inside to the outside.

Notice:Do not wipe the disc with a hard cloth or abrasive cleaners.

ii.Insert the disc again to see if it can be inserted and ejected normally.

OK:The disc can be inserted and ejected normally.

OK There is dust on the disc surface

NG

3 Replace the disc

Replace the disc with a normal one and see if the disc can be inserted and ejected normally.

OK: The disc can be inserted and ejected normally.

OK Damaged disc

NG

4 Check whether the rear connector of the multimedia host is loose.

WillCDRe-plug the rear-end connector of the host and check whether the fault is restored to normal.

OK: The disc can be ejected.

OK Connector is loose

NG

5 Replace multimedia host

273
Car electrical appliances BYDe6Repair Manual

274
 Car electrical appliances BYDe6Repair Manual
8. TVThe signal is poor or the image quality is not clear

1). Check steps:

1 On-vehicle inspection

Re-run the automatic channel search and check the picture and sound quality.

OK: The picture and sound quality return to normal.

OK System normal

NG

2 Compare with the same modelTVEffect

Compare this vehicle with another vehicle of the same model and configurationTVCompare with a car with normal performance to check the difference in performance.

OK: The effect is not much different.

OK System normal

NG

3 Check the antenna amplifier

Temporarily replace a normal antenna amplifier and checkTVWhether the effect returns to normal.

OK Replace the antenna amplifier

NG

4 examineTVModules

Temporarily replace a normalTVModule, checkTVWhether the effect returns to normal.

OK replaceTVModules

NG

5 examineTVPrinted Antenna

275
 Car electrical appliances BYDe6Repair Manual
Temporary replacement of a pieceTVPrinted antenna, checkTVWhether the effect returns to normal.

OK replaceTVPrinted Antenna

NG

6 examineTVModule to multimedia host circuit

Refer to this chapter "TVModule to multimedia host circuit"

OK: The circuit is normal.

OK

7 Replace multimedia host

9.Play CD and skip

1). Check steps:

1 Cleaning the disc

i. Use a soft cotton cloth to wipe the disc radially from the inside to the outside.

Notice:Do not wipe the disc with a hard cloth or abrasive cleaners.

ii.Insert the CD again and see if the disc skipping phenomenon still occurs.

OK: The disc jumping phenomenon no longer occurs.

OK There is dust on the disc surface

NG

2 Replace the disc

Replace the disc with a normal one and see if the disc skipping problem still occurs.

OK: The disc jumping phenomenon no longer occurs.

276
 Car electrical appliances BYDe6Repair Manual

OK Damaged disc

NG

3 Check the multimedia host installation

Check whether the multimedia host is installed correctly.

OK: The installation is correct.

NG Correctly install the multimedia host

OK

4 Checking the temperature changes in the cockpit

Check for drastic temperature changes in the cockpit.

OK: Drastic temperature changes

NG Replace multimedia host

OK

5 The fault is caused by temperature change (it can be left alone for a while before use)

10.Black display
1). Check steps:

1 On-vehicle inspection

Turn the computer on and off repeatedly to check if there is an image displayed.

OK: The fault disappears.

OK System normal

NG

2 Check cockpit temperature and humidity

Check if there is high humidity in the cockpit, if the temperature changes dramatically, or if the temperature is too high or too low.

277
 Car electrical appliances BYDe6Repair Manual
Notice:Too much humidity can easily cause a short circuit on the LCD screen.

OK: The humidity and temperature are suitable.

NG Adjust the humidity and temperature

OK

3 Go to Multimedia Host Power Circuit

OK: The circuit is normal.

OK

4 Check the multimedia host

Temporarily replace a normal multimedia host and check whether the fault is eliminated.

OK: Fault eliminated.

OK Replace multimedia host

NG

5 Check the multimedia display

Temporarily replace a normal central control panel (including multimedia display) to check whether the fault is eliminated.

OK: Fault eliminated.

OK Replacement of the central control panel

NG

6 Check the circuit from the center console to the multimedia host

11.Touch screen failure

1). Check steps:

1 On-vehicle inspection

Turn the multimedia host on and off repeatedly, and try pressing different buttons on the touch screen.

OK: The key returns to normal.

278
 Car electrical appliances BYDe6Repair Manual

OK System normal

NG

2 Replace multimedia host

12.The radio has no signal (or very poor signal)

Tip: Check the radio reception ability away from tall buildings. If you are far away from the radio station or near mountainous areas or high-voltage power lines of buildings, the reception may be poor.

The ability must be poor.

1).Check steps:

1 Check the automatic search function

i. Turn the power level up toACCfiles.

ii.The radio is tuned toAM, check whether the search function is normal.

OK: The automatic search function is normal.

OK Replace multimedia host

NG

2 Check for interference from other devices

Check for other equipment that may interfere with operation, such as wipers, window lifts, etc.

OK: There is interference with electrical appliances.

OK Impact of other electrical appliances

NG

3 Check the radio (multimedia head unit)

i. Unplug the radio feeder.

ii.With the other connectors of the multimedia host connected, turn the power level up toACCfiles.

iii.Turn on the sound system and tune inAMmodel.

iv.Insert a screwdriver or wire into the radio antenna jack and check if any noise is generated.

OK: Noise is generated.

NG Replace multimedia host

279
 Car electrical appliances BYDe6Repair Manual

OK

4 Check the radio antenna amplifier

i. Turn the power level up toACCfiles.

ii.Turn on the radio and tune toAMmode, touch the radio antenna with the tip of the screwdriver to check if any noise is generated.

OK: Noise is generated.

NG Replace the radio antenna amplifier

OK

5 Check the radio feeder

13.Multimedia host power supply circuit

1). Circuit Diagram:

Check steps:

1 Check Insurance

Using a multimeter File inspection audio and video systemF2/4, auxiliary power supplyF2/20Is the fuse conducting?

OK: Fuse is turned on.

280
 Car electrical appliances BYDe6Repair Manual

NG Replacement insurance

OK

2 Check the wiring harness

i. Unplug the multimedia hostG81Connector.

ii.Measure the voltage or resistance between the terminals of the harness-end connector.

Terminals condition Normal value

G81-3-Body Power onACCfiles 11~14V

G81-4-Body Always 11~14V
G81-7-Body Always Less than1Ω

NG Replace wiring harness or connector

OK

3 Go to next step in process

281
 Car electrical appliances BYDe6Repair Manual
14.Discharge circuit

1). Circuit Diagram:

2).Check steps:

1 Check Insurance

Use a multimeter to test the auxiliary power supplyF2/20, AmplifierF3/2.

OK: Fuse is turned on.

NG Replacement insurance

OK

2 Check the wiring harness

282
 Car electrical appliances BYDe6Repair Manual

i. Unplug the external amplifierM35Connector.

ii.Measure the voltage or resistance between the terminals of the harness-end connector.

Terminals condition Normal value

M35-1-Body Always 11~14V

M35-2-Body Always 11~14V
M35-6-Body Power onACCfiles 1~14V
M35-12-Body Always Less than1Ω

M35-13-Body Always Less than1Ω

NG Replace wiring harness or connector

OK

3 Circuit is normal

283
 Car electrical appliances BYDe6Repair Manual
15.Speaker to external amplifier circuit

1). Circuit Diagram:

284
 Car electrical appliances BYDe6Repair Manual

2).Check steps:

1 Check the speakers

Tip: The inspection method for all speakers is the same (connectors may be different), only the left front door is used as an example.

285
 Car electrical appliances BYDe6Repair Manual
i. Unplug the left front door speakerT01Connector.

ii.Measure the resistance between the speaker terminals.

Terminals condition Normal value

1-2 Always about4Ω

NG Replace the speaker

OK

2 Check the wiring harness

i. Unplug the speakersV02,V08,W08,W02,G42,M40,T01,G23,U03,G48Connector, unplug the external power

putM35,M37Connector.

ii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

V02-1-M37-10 Less than1Ω

V02-2-M37-4 Less than1Ω

V08-1-M37-10 Less than1Ω

V08-2-M37-4 Less than1Ω

W08-1-M37-9 Less than1Ω

W08-2-M37-3 Less than1Ω

W02-1-M37-9 Less than1Ω

W02-2-M37-3 Less than1Ω

G42-1-M35-22 Less than1Ω

G42-2-M35-11 Less than1Ω

M40-1-M37-7 Less than1Ω

M40-2-M37-2 Less than1Ω

M40-3-M37-8 Less than1Ω

M40-4-M37-1 Less than1Ω

T01-1-M37-12 Less than1Ω

T01-2-M37-6 Less than1Ω

286
 Car electrical appliances BYDe6Repair Manual
G23-1-M37-12 Less than1Ω

G23-2-M37-6 Less than1Ω

U03-1-M37-11 Less than1Ω

U03-1-M37-5 Less than1Ω

G48-1-M37-11 Less than1Ω

G48-1-M37-5 Less than1Ω

NG Replace wiring harness or connector

OK

3 Replace the external amplifier

287
 Car electrical appliances BYDe6Repair Manual
16. TVModule power circuit

1). Circuit Diagram:

2).Check steps:

1 Check the wiring harness

i. UnplugTV M34Connector.

ii.Measure the voltage or resistance between the terminals of the harness-end connector.

Terminals condition Normal value

M34-1-Body Always 11~14V

M34-11-Body Always Less than1Ω

NG Replace wiring harness or connector

OK

2 Circuit is normal

288
 Car electrical appliances BYDe6Repair Manual
17.Steering wheel switch to multimedia host circuit

1). Circuit Diagram:

2).Check steps:

1 Check the steering wheel switch terminals

i. Unplug the multimedia hostG82,G83Connector.

ii.Measure the resistance between the terminals of the harness-side connector.

Terminals condition Normal value

G82-14-G82-15 Do not press any key Infinity

G82-14-G82-15 PressVOL+ Less than1Ω

G82-14-G82-15 PressVOL- about8.2KΩ

289
 Car electrical appliances BYDe6Repair Manual
G82-14-G82-15 PressCH+ about23.2KΩ

G82-14-G82-15 PressCH- about50.2KΩ

G82-14-G82-15 PressMODE about132.2 KΩ

G83-10-G82-15 Do not press any key Infinity

G83-10-G82-15 PressVIEW about4.64 KΩ

G83-10-G82-15 PressOFF about9.84 KΩ

G83-10-G82-15 Press Voice Recognition about23KΩ

G83-10-G82-15 Press to answer the call about1KΩ

G83-10-G82-15 Press to hang up the call about3.16KΩ

NG Replace steering wheel switch

OK

2 Check wiring harness (steering wheel switch-multimedia host)

i. Unplug the steering wheel switchX993,X994Connector, multimedia hostG82,G83Connector.

ii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

X994-3-G82-14 Less than1Ω

X994-2-G82-15 Less than1Ω

X993-4-G83-10 Less than1Ω

X993-3-G82-15 Less than1Ω

X993-4-G83-10 Less than1Ω

X993-5-G82-15 Less than1Ω

X993-6-G83-10 Less than1Ω

X993-1-G82-15 Less than1Ω

NG Replace wiring harness and clock spring

OK

3 Go to next step in process

290
 Car electrical appliances BYDe6Repair Manual
18.External amplifier to multimedia host circuit

1). Circuit Diagram:

2).Check steps:

1 Check the multimedia host terminal

From the multimedia hostG83Connector rear end leads, measure the voltage between the terminals of the harness end connector.

Terminals condition Normal value

G83-12-Body Always Less than1V

NG Replace multimedia host

OK

2 Check the wiring harness (multimedia host-external amplifier)

291
 Car electrical appliances BYDe6Repair Manual

i. Unplug the multimedia hostG83Connector.

ii.Unplug the external amplifierM35Connector.

iii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

G83-12-M35-17 Less than1Ω

G83-13- M35-15 Less than1Ω

G83-14-M35-7 Less than1Ω

G83-29- M35-16 Less than1Ω

G83-30-M35-18 Less than1Ω

NG Replace wiring harness or connector

OK

3 Go to next step in process

19. GPSNo satellite reception

1). Check steps:

1 Check the multimedia host (GPSmodule)

i. Enter the map interface.

ii.Click View Satellite Number.

OK: The number of satellites received is3indivual.

NG Replace multimedia host

OK

2 Replacement or repairGPSantenna

292
 Car electrical appliances BYDe6Repair Manual

20.Amplifier not detected

1). Circuit Diagram:

2).Check steps:

1 Check the external amplifier power supply

i. From an external amplifierM35Connector rear leads.

ii.Check the voltage at each terminal.

Terminals condition Normal value

M35-1-Body Always 11~14V

M35-2-Body Always 11~14V

OK Jump to3step

NG

2 Check Insurance

293
 Car electrical appliances BYDe6Repair Manual

Check with a multimeterF3/2Is the amplifier fuse normal?

OK: Fuse is turned on.

NG Replacement insurance

OK

3 Check whether the audio cable is connected properly

i. External AmplifierM35Connectors and multimedia hostsG83Unplug and re-plug the connector.

ii.Check whether it returns to normal.

OK: Return to normal.

OK Connector is loose

NG

4 Check the external amplifier

i. Temporarily replace it with a normal external amplifier.

ii.Check whether it returns to normal.

OK: Return to normal.

OK The external amplifier is damaged and needs to be replaced.

NG

5 Replace multimedia host

294
Car electrical appliances BYDe6Repair Manual

295
 Car electrical appliances BYDe6Repair Manual
21. ISystem switch group to multimedia host circuit

1). Circuit Diagram:

2).Check steps:

1 examineISystem switch group terminals

fromISystem switch groupG92Connector rear end leads, measure the voltage between the terminals of the harness end connector.

Terminals condition Normal value

G92-8-Body Up toACCfiles 11~14V

G92-9-Body Always Less than1 V

NG replaceISystem switch group

296
 Car electrical appliances BYDe6Repair Manual

OK

2 Check the wiring harness (Multimedia host -ISystem switch group)

i. Unplug the multimedia hostG86Connector.

ii.UnplugISystem switch groupG92Connector.

iii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

G86-6-G92-2 Less than1Ω

G86-7- G92-16 Less than1Ω

G86-23- G92-15 Less than1Ω

G86-24- G92-4 Less than1Ω

G86-25- G92-5 Less than1Ω

G86-26 -G92-6 Less than1Ω

G86-27- G92-14 Less than1Ω

NG Replace wiring harness or connector

OK

3 Go to next step in process

297
 Car electrical appliances BYDe6Repair Manual
twenty two.Emergency call microphone and Bluetooth microphone are out of service

1). Circuit Diagram:

2).Check steps:

1 Check the emergency call microphone and Bluetooth microphone

Temporarily replace a normal emergency call microphone or Bluetooth microphone and check whether the emergency call microphone or Bluetooth microphone has

effect.

OK: Emergency call microphone and Bluetooth microphone are effective.

OK Replace emergency call microphone, Bluetooth

NG

2 Check the wiring harness (multimedia host-emergency call microphone, Bluetooth microphone)

i. Unplug the multimedia hostG86Connector.

ii.Unplug the emergency microphone and Bluetooth microphoneP06Connector.

iii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

298
 Car electrical appliances BYDe6Repair Manual
P06-3-G86-4 Less than1Ω

P06-4-G86-20 Less than1Ω

P06-5-G86-2 Less than1Ω

P06-6-G86-19 Less than1Ω

NG Replace wiring harness or connector

OK

3 Replace multimedia host

twenty three.Right front camera and reversing camera are out of service

1). Circuit Diagram:

2).Check steps:

1 Check the right front camera and reversing camera

Temporarily replace a normal right front camera and reversing camera, and check whether the right front camera and reversing camera are effective.

OK: The right front camera and reversing camera are effective.

299
 Car electrical appliances BYDe6Repair Manual

OK Replace the right front camera and reversing camera

NG

2 Check the wiring harness (multimedia host-right front camera, reversing camera)

i. Unplug the multimedia hostG86Connector.

ii.Unplug the right front cameraU13, Reversing cameraY11Connector.

iii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

U13-1-G86-14 Less than1Ω

U13-3-G85-3 Less than1Ω

U13-4-G86-30 Less than1Ω

U13-6-G85-11 Less than1Ω

Y11-1-G86-12 Less than1Ω

Y11-2-G86-13 Less than1Ω

Y11-3-G85-12 Less than1Ω

Y11-4-G85-4 Less than1Ω

NG Replace wiring harness or connector

OK

3 Replace multimedia host

300
 Car electrical appliances BYDe6Repair Manual
24. IPODTo multimedia host circuit

1). Circuit Diagram:

2).Check steps:

1 examineIPODTerminals

fromIPOD G88Connector rear end leads, measure the voltage between the terminals of the harness end connector.

Terminals condition Normal value

G88-15-Body Up toACCfiles 11~14V

G88-16-Body Always 11~14V

NG replaceIPOD

OK

2 Check the wiring harness (Multimedia host -IPOD）

301
 Car electrical appliances BYDe6Repair Manual

i. Unplug the multimedia hostG83,G86Connector.

ii.UnplugIPOD G88Connector.

iii.Measure the resistance between the terminals of the harness-side connector.

Terminals Normal value

G88-1-G86-17 Less than1Ω

G88-2-G86-1 Less than1Ω

G88-4-G86-18 Less than1Ω

G88-5-G83-2 Less than1Ω

G88-6-G83-3 Less than1Ω

G88-7-G83-1 Less than1Ω

G88-9-G83-18 Less than1Ω

G88-10-G83-16 Less than1Ω

G88-11-G83-17 Less than1Ω

G88-12-G83-15 Less than1Ω

NG Replace wiring harness or connector

OK

3 Replace multimedia host

302
 Car electrical appliances BYDe6Repair Manual

9. Prepare tools
Gloves A pair

Cross A handful

One word A handful

wrench(150Items) set
Torque wrench A handful

303
 Car electrical appliances BYDe6Repair Manual

10. Disassembly and Installation

1.Multimedia host disassembly and assembly 4). Install the lower panel of the instrument panel

1). Remove the lower middle guard plate of the instrument panel 2. ISystem switch assembly and disassembly

2).Disassembling the multimedia host 1).DisassemblyISystem switch group

i. Disassemble left and right4screws. i. Pry it up with a flat pickIRear side of system switch pack.

ii.Remove the multimedia unit. ii.Disconnect the connector.

iii.Disconnect the connector. iii.RemoveISystem switch group.

3).Install multimedia host 2).InstallISystem switch group

i. Connect the connector to the multimedia host. i. Plug in the connector.

ii.Snap the multimedia unit into the instrument panel. ii.WillIThe system switch pack snaps into the middle of the instrument panel.

iii.Install left and right4screws.

3.Multimedia operation panel disassembly and assembly

1).Removing the multimedia operation panel

i. Use a flat head screwdriver to pry up the rear side of the multimedia control panel.

ii.Disconnect the connector.

iii.Remove the multimedia operation panel.

304
 Car electrical appliances BYDe6Repair Manual
2).Installing the multimedia operation panel 1). Removing the left front tweeter

i. Plug in the connector. i. Use a flat head screwdriver to pry up the back of the speaker.

ii.Snap the multimedia operating panel into the instrument panel. ii.Disconnect the connector.

iii.Remove the speaker.

4.Door speaker disassembly and assembly

Note:Take the front door as an example

1). Remove the left front door inner guard plate

2). Installing the front left tweeter

2).Remove the left front door speaker

i. Plug in the connector.

i. Disassembly3fixing screws.
ii.Snap the left front tweeter into the instrument panel.

ii.Disconnect the connector and remove the speaker.

6.Center speaker disassembly and assembly

3). Install the left front door speaker

1). Removing the center speaker cover

i. Align the left front door speaker with the mounting holes.

2).Removing the center speaker

ii.Install3fixing screws.
i. Disassembly2bolts.

ii.Disconnect the connector and remove the center speaker.

4).Install the left front door inner guard plate

5.Front tweeter speaker removal

Note:Front tweeter example

305
 Car electrical appliances BYDe6Repair Manual
3).Installing the Center Speaker

i. Plug in the connector.

ii.Align the center speaker with the mounting holes.

iii.Install2bolts.

4).Installing the center speaker cover

306
 Car electrical appliances BYDe6Repair Manual
7.Rear door tweeter speaker removal and installation

Note:The left door tweeter as an example

1). Removing the left rear door guard

2).Removing the left rear door tweeter

i. Disassembly2A self-tapping screw.

ii.Disconnect the connector.

iii.Remove the left rear door tweeter.

3). Installing the Subwoofer

i. Align the subwoofer with the mounting holes.

ii.Install3A nut.
iii.Plug in the connector.

3).Install the tweeter in the left rear door

i. Align the left rear door tweeter with the mounting hole.

ii.Install2A self-tapping screw.

4). Install the spare wheel cover
iii.Plug in the connector.

9.External Amplifier Disassembly and Assembly

1). Open the spare tire cover

2). Removing the vehicle tool box

3). Disassembling the external amplifier

i. Disassembly3Nuts.

ii.Disconnect the connector.

iii.Remove the external amplifier.

4). Install the left rear door guard

8.Subwoofer disassembly and assembly

1). Removing the spare wheel cover

2).Removing the Subwoofer

i. Disassembly3A nut.

ii.Disconnect the connector.

iii.Remove the subwoofer.

307
 Car electrical appliances BYDe6Repair Manual
4).Installing an external amplifier 5). Disassemble the Gateway Controller (see Gateway Controller)

i. Align the external amplifier with the mounting holes. 6). Disassembling the car TV module

ii.Install3Nuts. i. Disassemble the car TV module2A connector.

iii.Plug in the connector. ii.Disassembly3Nuts.

iii.Remove the car TV module.

5). Install the vehicle tool box

6). Install the spare wheel cover

7).Installing the car TV module

10.Car TV module disassembly and assembly

i. Align the car TV module with the mounting holes.

1). Removing the passenger seat assembly

ii.Tighten with a torque wrench3Nuts, tightening torque

2). Removing the passenger seat guard

21N·m.
3). Lifting the carpet

iii.Connect to the car TV module2A connector.

4). Remove the left electrical protection box

i. Disassembly2Nuts.

ii.Remove the left electrical protection box.

308
 Car electrical appliances BYDe6Repair Manual
8). Install the Gateway Controller (see Gateway Controller) 2). InstallIPODinterface

9). Install the left electrical protection box i. Plug in the connector.

i. Align the left electrical protection box with the mounting hole. ii.WillIPODThe interface is snapped into the auxiliary instrument panel.

ii.Install2Nuts.

10).Installing Carpet 12. GPSantenna

11).Install the passenger seat guard 1). Removing the instrument cluster cover

12).Install the passenger seat assembly 2).DisassemblyGPSantenna

i. Disassembly2bolts.

11. IPODInterface disassembly and assembly ii.Disconnect the connector.

1). DisassemblyIPODinterface

i. Pry it up with a flat pickIPODRear of the interface. iii.RemoveGPSantenna.

ii.Disconnect the connector.

iii.RemoveIPODinterface.

3).InstallGPSantenna

i. WillGPSAlign the antenna with the mounting hole.

ii.Install2bolts.
iii.Plug in the connector.

309
 Car electrical appliances BYDe6Repair Manual
4).Installing the instrument cluster cover

13.External Antenna Disassembly and Assembly

3).
1).
Installing an External Antenna
Removing the front interior light

i. Insert the external antenna into the mounting hole.

2).Removing the External Antenna

ii.Install1fixing nuts.
i. Disassembly1Nuts.
iii.Plug in the connector.
ii.Disconnect the external antenna connector.

iii.Remove the antenna from the outer case.

4).Installing the front interior lights

310