Nagpur Metropolitan Region Development Authority

EXTRA ITEM- Lot-1 RATE LIST

NAME OF DIVISION :- PROJECT DIVISION

Name of Work : Construction of retaining wall & pathway under Development of Rakhi Talav at Tah. Ramtek, Dist. Nagpur (IInd Call) (T.No 01 Dated 03-06-2024)
Name of Contractor : M/s ARM Infrastructure
Tender No. : 01 Dated 03-06-2024
Date of Work Order : SE/40/ dt 26-07-2024
Time limit : 10 months i.e upto 25-05-2025
Date of Completion : 25-05-2025
Amount of Contract : Rs. 36807142.30 @ 1.510 % Below of Rs. 37368928.00
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Removing doors and windows with frames and stacking the
1 46.15 48.6 NOS 159.10 159.10 One Hundred & Fifty Nine - Paise Nine Only 7,732.26
materials as directed with all leads, lifts etc. complete.

Removing W.C. pans including disconnecting the sanitary and

water supply connections, removing and breaking flooring and
bed con-crete around pan removing the same carefully and Two Hundred & Eleven - Paise Fourteen
2 46.41 10 NOS 211.15 211.15 2,111.50
stacking the serviceable materials as adn where directed Only
including throwing the unserviceable materiasls out side etc.
carefully and throwing out the refusal outside etc. complete.

Removing urinal pans or wash hand basins with frame

including disconnecting the sanitary and water supply
3 46.4 connections, removing the same carefully and stacking the 12 NOS 97.90 97.90 Ninety Seven - Paise Eighty Nine Only 1,174.80
serviceable materials as and where directed including
throwing the unserviceable materials outside etc complete
Providing and laying vitrified matt finish tiles having size 590
mm to 605 mm x to 605 mm of 8 to 10 mm thickness and
confirming IS. 15622-2006 (Group Bla) of approved make, One Thousand Seven Hundred & Thirty
4 33.43 124.02 SQM 1737.36 1,737.36 2,15,467.66
shade and pattern for dado and skirting in required position Seven - Paise Thirty Six Only
fixed in 1:4 cement mortar including neat cement float, filling
joints, curing and cleaning etc. complete.
Providing and laying vitrified rustic matt stone finish tiles
having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to
10mm thickness and confirming to IS. 15622-2006 (Group
One Thousand Nine Hundred & Nine - Paise
5 33.45 Bla) of approved make, shade and pattern for dado and 295.86 SQM 1909.75 1,909.75 5,65,018.64
Seventy Five Only
skirting in required position fixed in 1:4 cement mortar
including neat cement float, filling joints, curing and cleaning.
etc. complete.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and fixing white Opal series European type wall-
hung, of size 400 mm x 370 mm x 575mm with approved
make flush valve including soil pipe, vent pipe upto outside Twenty Three Thousand Nine Hundred &
6 48.37 3 NOS 23918.40 23,918.40 71,755.20
face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, Eighteen - Paise Forty Only
cutting & making good walls, floors etc as directed by
Engineer in charge.
Providing and fixing Table top white wash basin of size
120x635x405mm rubber plugs and brass chain, with pillar
cock, C.P.Angular stop cock long thread, continental Twenty Four Thousand Eight Hundred &
7 48.36 4 NOS 24843.10 24,843.10 99,372.40
including S.S. bottle trap of approved make having necessary Forty Three - Paise Nine Only
pipe connection up to theoutside face of the wall.etc complete
as directed by Engineer in charge.
Providing and fixing white glazed urinal of size
710x460x300mm with sensotronic concealed type flushing
valve for urinal with complete kit having fittings, inlet pipe
Eighteen Thousand Nine Hundred & Fifty
8 48.43 with stop tap, brackets for fixing the cistern, 32mm diameter 3 NOS 18952.70 18,952.70 56,858.10
Two - Paise Seventy Only
P.V.C. flush pipe with fitting and flushing arrangement
including lead soil pipe, lead trap & soil pipe connection upto
the outside face of wall etc complete.
Providing and fixing C.P. BIB cock with wall flange of
One Thousand One Hundred & Thirty -
9 42.83 approved make including necessary sockets/ union nut etc. 5 NOS 1130.15 1,130.15 5,650.75
Paise Fifteen Only
complete.
Providing and fixing C.P. pillar cock long neck with aerator of
One Thousand Six Hundred & Fifty Seven -
10 42.82 approed make including necessary sockets/union nut etc. 4 NOS 1657.50 1,657.50 6,630.00
Paise Fifty Only
complete.
Providing and fixing C.P. Angular stop clock with wall flange
Two Thousand Seven Hundred & Forty -
11 42.79 of approved make continental including necessary 8 NOS 2740.75 2,740.75 21,926.00
Paise Seventy Five Only
sockets/union nut etc. complete.
Providing and fixing 10cm C.I. Nahani Trap including C.I.
One Thousand One Hundred & Forty Nine -
12 41.8 grating bend and piece of C.I. pipe upto the outside face of the 10 NOS 1149.55 1,149.55 11,495.50
Paise Fifty Four Only
wall complete.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and Fixing 30 MM thick BOTH SIDE
PRELAMINATED SOLID PANEL PVC DOOR SHUTTER
consisting of frame made out of M.S tubes of 19 guage
thickness and, size 19 x 19 mm for styles and 15 x15 mm for
the top and bottom rails, M.S frame shall have a coat of metel
primer of approved make and manufacture. M.S frame shall be
covered with heat mouled PVC 'C' channel made from 5 mm
(+/0.25) thick prelaminated sheet of density 600
Kilogram/cbm, of size 30mm thickness 70mm width out of
which 50mm shall be flat and 20mm shall be tapered in 45?
angle on either side forming stiles ; and 5 mm thick, 95 mm
Six Thousand Six Hundred & Seventy Eight -
13 39.47 wide PVC sheet out of which 75 mm shall be falt and 20 mm 8.4 SQM 6678.95 6,678.95 56,103.18
Paise Ninety Four Only
shall be tapered in 45 on the inner side to form top and bottom
rail and 115 mm wide PVC sheet out of which 75 mm shall be
falt and 20 mm shall be tapered on both sides to form lock
rail.Top,bottom and lock rail shall be provided either side of
the panel. An additional 5 mm (+/0.25) thick PVC strip of 20
mm width is to be stuck on the bottom side of the ' c ' channel
prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be
fitted inside the M.S. frame welded/ sealed to the styles and
rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on
either side and joined together with solvent cement adhesive
etc, 10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide

Providing and fixing 34 mm thick moulded door shutter

consisting of solid core single leaf flush door of 30 mm
thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width
on one style and top rail and 10 mm (5mm x 2) thick x 30 mm
width on other style and bottom rails. The inner panels
laminated with 2 mm thick termite proof, water proof and fire
Seven Thousand Five Hundred & Sixty Seven
14 39.48 resistant moulded PVC sheet with 2,4,6 design in different 12.6 SQM 7567.40 7,567.40 95,349.24
- Paise Thirty Nine Only
plain and /or prelim colours on one side after routing the
moulded design on flush doors and 2 mm plain and /or pre
lam PVC on other side using rubber adhesive on flush door
and solvent cement adhesive on the PVC lipping etc. as per
direction of Engineer in charge and manufacturers
specification and drawing etc. complete.

Providing and applying Two coats of wall care Putty on

15 32.34 plastered surface and Ceiling and Walls to prepare surface 113.22 SQM 91.80 91.80 Ninety One - Paise Seventy Nine Only 10,393.60
even and smooth of approved make, etc complete.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and applying Texture plaster with finishing with
texture material of approved make in 3 to 4 millimeter
thickness on previously plastered surface, including Plaster
16 32.32 272.28 SQM 640.55 640.55 Six Hundred & Forty - Paise Fifty Five Only 1,74,408.95
Groove 6mm thickness or Tape Grooves 35 to 45 mm
thickness or as required, in all position including preparing the
surface, scaffolding etc. complete.

Providing and fixing in position Gypsum board false ceiling

with 12.5 mm thick Gypsum boards, screwed/fixed to the
under structure of suspended G.I. Grid constructed and
suspended from the main ceiling consisting of ceiling sections
of size 25 x 50 mm maximum center to center distance of 600
milimetre perimeter channel and intermediate channels at
maximum center to center distance 1200 milimetre galvanized
grid should be fixed to reinforced cement concrete slab. The
One Thousand Eight Hundred & Four -
17 38.51 gypsum board should be fixed to galvanized iron grid with 113.4 SQM 1804.40 1,804.40 2,04,618.96
Paise Forty Only
necessary screws. The boards should be taped and filled from
underside to give smooth, seamless ceiling. The rate should
include necessary additional ceiling sections and intermediate
channels. Additional intermediate channels should be fixed to
strap hangers for additional support to prevent strapping at
every 1200 milimetre item to be completed in all respect
including necessary sleeves for ducts finishing of joints cut
outs, painting including labour, material, lifts etc. all complete.

Providing and fixing H.D.P container one piece moulded

water tank made out of low density polythyler and built
18 42.54 corrugation including of delivery up to destination hoisting 4000 Per Litre 11.20 11.20 Eleven - Paise Twenty Only 44,800.00
and fixing of accessories such as inlet, outlet overflow of all
tanks capacity above 1000 to 20,000 litres
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and fixing of factory made uPVC Sliding window &
door (White Colour) complete, comprising uPVC multi-
chambered frame having in-built uPVC roller track on top and
uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly
reinforced with G.I. section 1.5 mm, wherever required. uPVC
window & door profile shall be made in India & shall conform
to BS EN 12608 and other standards as mentioned below:
S.No. Name of the test Test Method Specified Parameter
1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2
Vicat Softening Temperature EN ISO – 306 Shall not be <
750C
3 Charpy Impact Strength EN ISO – 179-2 Shall not be <
20KJ/m2
4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < Nine Thousand Nine Hundred & Fifty Five -
19 54.08 2200 N/mm2 10.8 Sqm 9955.20 9,955.20 1,07,516.16
Paise Twenty Only
5 Mean Breaking Stress for welded corner
(a) For the tensile bending test EN – 514 Shall not be < 25
N/mm2
(b) For the compression bending test Shall not be < 30N/mm2
6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %
7 Surface Spread of flame BS : 476 - Part 7 Classification 1
8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily
ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa
10 Shear Modulus ASTM D 732 Shall not be < 220 MPa
11 Tensile Strength EN ISO 527 Shall not be < 30 MPa
All corners of frame and sash will be fusion welded. After
placing 5 mm Float Annealed glass in the sash, uPVC glazing
bead, interlock, EPDM / TPE gasket, brush shall be provided
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and fixing of factory made uPVC Louver window
(White Colour) comprising of uPVC multi-chambered with
wall thickness of 2.3mm (+-0.2 mm ), duly reinforced with 1.5
mm thick G. I. Section. uPVC window & door profile shall be
made in India & shall conform to BS EN 12608 and other
standards as mentioned below: S.No. Name of the test Test
Method Specifie Parameter 1 Tensile Impact Strength ISO
8256 - more than 700Kj/m2 2 Vicat Softening Temperature
EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength
EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus
Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Nine Thousand Four Hundred & Sixteen -
20 54.11 2.88 SQM 9416.65 9,416.65 27,119.95
Breaking Stress for welded corner (a) For the tensile bending Paise Sixty Four Only
test EN – 514 Shall not be < 25 N/mm2 (b) For the
compression bending test Shall not be < 30N/mm2 6 Heat
Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface
Spread of flame BS : 476 - Part 7 Classification 1 8
Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable
9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10
Shear Modulus ASTM D 732 Shall not be < 220 MPa 11
Tensile Strength EN ISO 527 Shall not be < 30 MPa. All
corners of frame shall be fusion welded. Both vertical sides of
the frame, adjustable louver mechanism having one lever or
Removing lime or lean cement concrete including stacking the Five Hundred & Sixty Nine - Paise Fourteen
21 46.12 171 CUM 569.15 569.15 97,324.65
spoils as directed with all leads, lifts etc, complete. Only
Removing rich mix cement concrete including stacking the Nine Hundred & Forty Eight - Paise Sixty
22 46.13 4.5 CUM 948.60 948.60 4,268.70
spoils as directed with all leads, lifts etc, complete. Only
Providing and Fixing buff yellow sand stone hand carved and
hand dressed blocks for cladding and flooring of 50 mm / 75
Approved in
mm thick ness having smooth textured surface. The block to
PWD T.S.
be coated ith antigree moss, algae sedimentation patina and Five Thousand Seven Hundred & Thirty
23 NCSR 2500 Sqm 5737.00 5,737.00 1,43,42,500.00 No.
lacqured in 2 coats to give lasting stain free finish. The blocks Seven Only
273/T/S.S./202
are fixed over required cement morter in 1:4 ration in cement
4-25
slurry and hardners in matching color & fitting of joints
complete.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Providing and laying Cast in situ/Ready Mix cement concrete
M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work
in foundations like raft, strip foundations, grillage and
footings of R.C.C. columns and steel stanchions etc. including
bailing out water, Steel centering, formwork, cover blocks,
laying/pumping, compaction and curing roughening the Seven Thousand Two Hundred & Eighty
24 25.13 14.58 CUM 7287.00 7,287.00 1,06,244.46
surface if special finish is to be provided (Excluding Seven Only
reinforcement and structural steel) etc. complete, with fully
automatic micro processor based PLC with SCADA enabled
reversible Drum Type mixer/ concrete Batch mix plant (Pan
mixer) etc. complete. With fine aggregate (Crushed sand VSI
Grade)
Supplying and laying HMS PVC conduit FRLS grade 20 mm
25 1-1-8 dia. With necessary accessories in RCC work/false 30 Mtr 99 99.00 Ninety Nine Only 2,970.00
ceiling/false flooring as per specification No. WG-MA/CC.
Supplying and erecting HMS PVC conduit FRLS grade 25
mm dia. With necessary accessories in wall/floor with
26 1-1-9 30 Mtr 127 127.00 One Hundred & Twenty Seven Only 3,810.00
chiselling appropriately as per
specification No: WG-MA/CC.
Supplying and laying HMS PVC conduit FRLS grade 25 mm
dia with necessary accessories in RCC work/false ceiling/false
27 1-1-10 30 Point 117 117.00 One Hundred & Seventeen Only 3,510.00
flooring as per specification
No. WG-MA/CC.
Supplying and erecting modular type switch 16A duly
28 1-6-2 6 Each 106 106.00 One Hundred & Six Only 636.00
erected on provided plate.

Supplying and erecting unbreakable concealed type

modular switch box with double mounting plate for 8
1-6-
29 module duly erected flush to wall with required chiselling 5 Each 417 417.00 Four Hundred & Seventeen Only 2,085.00
39
and finishing with cement mortar / POP as per required to
match the background.

Supplying and erecting unbreakable concealed type

modular switch box with double mounting plate for 12
30 1-6-40 module duly erected flush to wall with required chiselling 5 Each 523 523.00 Five Hundred & Twenty Three Only 2,615.00
and finishing with cement mortar / POP as per required to
match the background.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Supplying and erecting unbreakable concealed type modular
switch box with double mounting plate for 16 / 18 module
31 1-6-41 duly erected flush to wall with required chiselling and 2 Each 579 579.00 Five Hundred & Seventy Nine Only 1,158.00
finishing with cement mortar / POP as per required to
match the background.
Supplying and erecting mains with 2x1.5 sq.mm FRLSH
copper PVC insulated wire laid in provided
32 1-3-1 100 Mtrs 40 40.00 Forty Only 4,000.00
conduit/trunking/inside pole/Bus bars or any other places
as per specification No: WG-
Supplying and erecting mains with 2x2.5 sq.mm FRLSH
copper PVCinsulated wire laid in provided
33 1-3-2 100 Mtrs 62 62.00 Sixty Two Only 6,200.00
conduit/trunking/inside pole/Bus bars or anyother places.
as per specification No: WG-MA/BW
Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper
1-3-1 PVC insulated wire laid in provided conduit/trunking/inside
34 (Note- pole/Bus bars or any other places as per specification No: 100 Mtrs 20 20.00 Twenty Only 2,000.00
3) WGMA/ BW (For Earth- green
color)
Supplying & erecting mains with 4x4 sq.mm FRLSH copper
1-3-3
PVC insulated wire laid in provided conduit/trunking/inside
35 (Note- 30 Mtrs 178 178.00 One Hundred & Seventy Eight Only 5,340.00
pole/Bus bars or any other places.
1)
as per specification No: WGMA/ BW (HVLA FAN
Supplying and erecting shockproof 6A porcelain base
T.Switch / bell push erected on filled polypropylene board or
36 1-5-1 polished double wooden block / 3 mm thick hylam sheet / 5 Each 36 36.00 Thirty Six Only 180.00
4mm thick plywood pasted with 1.5 mm thick laminate with S
M screws and duly connected.
Supplying and erecting One/Two way piano type switch
6A./bell push erected on filled polypropylene board or double
polished wooden board/ folded or screwed board with top of
37 1-5-2 4 Each 40 40.00 Forty Only 160.00
either wooden/ 3 mm thick hylam sheet/ 4mm
thick plywood pasted with 1.5 mm thick laminate with S M
screws and duly connected.
Supplying and erecting adaptor for lamp holder 230 V.A.C.
38 1-5-8 4 Each 33 33.00 Thirty Three Only 132.00
supply.
Point wiring in for light/fan/bell in 20 mm metal conduit with
1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type
39 1-7-1 2 Point 856 856.00 Eight Hundred & Fifty Six Only 1,712.00
switch, earthing and required accessories as per specification
No: WG-PW/SW
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Point wiring for ceiling fan (Surface type under false ceiling
and concealed type for drops & switch boards on walls) in min
20 mm PVC conduit / casing n capping with 1.5 sq.mm.
40 1-7-16 10 Point 638 638.00 Six Hundred & Thirty Eight Only 6,380.00
(2+1E) FRLSH grade copper wires, modular type switch,
earthing and required accessories as per specification No: WG-
PW/HW

Supplying and erecting LED square / circular Max. 25 W

down lighter/ Panel Light having pressure die-cast aluminium
housing, polystyrene diffuser having system lumens output of
Min. 2750 Lumens, min. efficacy of 110
lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 One Thousand Nine Hundred & Fifty One
41 2-1-6 18 Each 1951 1,951.00 35,118.00
deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating Only
range of 120-270V, surge protection of 2.5 kV, Life class of
50,000 Hrs. at L70B50, including driver, having mounting
arrangement with board for surface type or spring loaded
mounting clips complete with 3 years warranty

Supplying and erecting LED Strip light 5m Length Max. 95 W

IP20 class having minimum lumens output of 1600
Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto Two Thousand Seven Hundred & Forty Four
42 2-1-11 10 Each 2744 2,744.00 27,440.00
5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, Only
operating range of 230-270V, Life class of 30,000 Hrs. at
L70B50 including driver with 1 year warranty.
Supplying & erecting UV Fly killer/ bug catcher Light Fitting
having 2 x 20W UV Tube Lights to cover min. area of 500
sq.ft with powdered coated M.S./ steel body suitable to work
43 2-1-23 3 Each 5059 5,059.00 Five Thousand &Fifty Nine Only 15,177.00
on 230V, AC Supply having top mounting arrangement with
SS chain complete and 3 core 1 mtr. flexible wire with 1 year
warranty.
Supplying and erecting regular/ standard model ceiling fan of
Two Thousand Two Hundred & Seventy Five
44 2-10-3 1400mm. Sweep complete erected in position as per 6 Each 2275 2,275.00 13,650.00
Only
specification no. FG-FN/CF

Supplying and erecting exhaust fan medium duty 230 V A.C.

2-10- 50 cycles 225 mm. 1400 RPM with condenser complete
45 4 Each 2032 2,032.00 Two Thousand &Thirty Two Only 8,128.00
15 erected in position with necessary materials. Fan motor with
moisture proof treatment and ‘E’ class insulation.
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Supplying & fixing anchor type fastener fan hook, with 2 nos.
46 2-11-2 of 10 mm dia x 75 mm long with necessary materials for 10 Each 103 103.00 One Hundred & Three Only 1,030.00
ceiling fan.

Supplying and erecting fan clamp of 30 x 5 mm. M.S. flat of

47 2-11-3 required length and 10 mm. M.S. bolt and nuts erected with 4 Each 195 195.00 One Hundred & Ninety Five Only 780.00
necessary hook of 10 mm. M.S. round bar and painted.

Supplying and erecting fan hook box of 10 mm M.S. round

bar bounded to the R.C.C. bars upto 50 mm length each side
and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl
100 mm dia. or equivalent square size and having depth upto
48 2-11-5 4 Each 176 176.00 One Hundred & Seventy Six Only 704.00
75 mm complete erected with duly painted by one coat of red
oxide paint and two coats of paint erected in position and
without any leakage of slurry of cement concrete on either side
of the box and positioned to the bottom level of the slab.

Supplying and erecting electronic type step regulator for

49 2-11-9 ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete 4 Each 206 206.00 Two Hundred & Six Only 824.00
erected on provided switch board.

Supplying and erecting exhaust fan medium duty 230 V A.C.

2-10- 50 cycles 225 mm. 1400 RPM with condenser complete
50 12 Each 2032 2,032.00 Two Thousand &Thirty Two Only 24,384.00
15 erected in position with necessary materials. Fan motor with
moisture proof treatment and ‘E’ class insulation.

Supplying, erecting & marking DPMCB 40A to 63A, C-

series with rated short circuit breaking capacity (Icn) 10kA in
51 5-3-8 4 Each 713 713.00 Seven Hundred & Thirteen Only 2,852.00
provided distribution board as per specification no. SW-
SWR/MCB
Supplying, erecting & marking TPMCB 6A to 32A, with
rated short - circuit breaking capacity (Icn) 10kA in
52 5-3-10 4 Each 751 751.00 Seven Hundred & Fifty One Only 3,004.00
provided distribution board as per specification no. SW-
SWR/MCB

Supplying, fixing and commissioning 4 pole RCBO 63A,

with overcurrent, rated short-circuit breaking capacity (10
5-6- Four Thousand Six Hundred & Sixty Six
53 kA) and earth leakage protection, with 30/100/300 mA 4 Each 4666 4,666.00 18,664.00
14 Only
sensitivity and short circuit and earth leakage trip indication
as per specification no SW-RCCB/RCBO
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words

Supplying & erecting triple pole and neutral distribution

board (TPNDB), SPMCB of 12 ways /phase (36 poles),
54 5-4-3 with door, 1.2mm thickness surface/flush mounted, IP 43 4 Each 4609 4,609.00 Four Thousand Six Hundred & Nine Only 18,436.00
Protection on iron/GI frame (horizontal busbar type) as per
specification no. SW-SWR/MCBDB

Supplying, erecting & terminating FR XLPE insulated,

galvanised steel formed wire armoured (strip) cable 1100 V,
55 7-1-29 4 core 16 sq. mm. aluminium conductor complete erected 10 Mtr 211 211.00 Two Hundred & Eleven Only 2,110.00
with glands & lugs, on wall/ trusses/pole or laid in
provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting iron work, sheet metal work

consisting of CRCA sheets, various sections of iron, plates,
56 6-1-19 chequered plates, rods, bars, MS pipes, etc. for panel 20 KG 186 186.00 One Hundred & Eighty Six Only 3,720.00
board or any other purpose with bending, cutting, drilling
and welding complete erected at the position with

TOTAL : 16554749.66
Below 249976.72
TOTAL : 16304772.94
GST 18% will be paid Extra
Amount of Extra items (1 to 56 ) Rs. 16304772.94 - (In Words Rs. One Crore Sixty Three Lakh Four Thousand Seven Hundred & Seventy Two - Paise Ninety Three Only )

Contractor E.E (Project-II) A. E (Project-I) PMC

M/s ARM Infrastructure, NMRDA, Nagpur NMRDA, Nagpur Architect

The extra item rate list is scrutinized in the office of Superintending Engineer, NMRDA/NIT and Confirmed that the items listed above are essential for completion of work.
Extra Item rate list for Amount Rs. 16304772.94 /- is hereby sanctioned . This Extra item rate list shall form a part of original agreement No. SE/40/ dt 26-07-2024
Sr. Item Rate approved by Authority
Descreption of Item Quantity Unit Rate Proposed Amount Remark
No. Code In Figure In Words
Superintending Engineer (Project)