Home Message Box APP Tender CMS Doc.

Library Tenderer Database Administration Debarment

My Account Help

Tuesday, 29 Oct, 2024 15:59:56 BST Last Login : Tuesday, 8 Oct, 2024 15:25:49 Welcome, Sazzad | Logout

View All Notifications

Form View Go Back to Tender/Proposal Document

Tender/Proposal Detail

Tender/Proposal ID : 1025835 Invitation Reference No. : 18.13.0000.325.07.002.24

Closing Date and Time : 27-Nov-2024 15:00 Opening Date and Time : 27-Nov-2024 15:00

Procuring Entity : Executive Engineer_Building

Brief : Construction of R.C.C. Container Yard No-01 in the vacant land beside Truck Terminal adjacent to the Port Connecting Road.

Tender/Proposal Status : Live View Notice

Form Name : Bill of Quantities

Chittagong Port Authority

Engineering Department
Form Header :
Bill of Quantities
Name of the work: Construction of R.C.C. Container Yard No-01 in the vacant land beside Truck Terminal adjacent to the Port Connecting Road.

Table Name : Bill of Quantities

Unit Total Total

Item Price Price Price
Unit Price
Item Code Measurement
Group Description of Item Quantity
no. (if Unit In In In
In figures (BDT)
any) Words Figures Words
(BDT) (BDT) (BDT)

01 A N/A Erection and maintenance of semi-permanent site office and removal of Job 1.00 Fill By Auto Auto Auto
the same after completion of work in accordance with the conditions of Tenderer/Consultant
contract. In addition to the office required for own use, the contractor - Money Positive(3
shall provide and maintain furnished site office for the use of Engineer-in- digits after decimal)
charge and his staff. The site office must have tiles floor, adequate
foundation, brick walls, false ceiling of gypsum board and all windows are
to be glazed, shuttered and provided with steel grill. Outside and inside
wall surface are to be painted on plaster acceptable to the Engineer-in-
charge. The site office shall be maintained in a secure condition by the
contractor until the completion of the contract and shall be provided with
electricity, water supply, wash rooms and sewerage facilities. All doors
shall be fitted with approved locks and windows shall be provided with
curtain/blinds. Before construction the contractor shall submit plans and
drawings showing proposed details and location for the site office,
including foundations, access roads, shades, layout of electrical and
water supply and hard standings there for the approval of Engineer-in-
charge. The Engineer-in-charge may require revision of the plans prior to
giving approval for construction. The contractor shall also submit detailed
proposed furniture, fittings and other items of equipment and plant to the
Engineer-in-charge for approval. These items shall be of the standard
quality suitable for site. The office, complete with furnishings, fittings,
access roads and hard standings shall be ready for occupation by the
Engineer-in-charge within 28 days from the date of taking over site by the
contractor. The contractor shall provide day and night guards and an
attendant for the field office. At the end of the contract all materials,
equipment and plant, furniture, fittings recovered from dismantling the
office and removing access road will be the property of the contractor. No
interim payment shall be certified unless engineer's office with required
facilities are constructed and accepted by the Engineer-in-charge.
(This is a time related item; proportionate payment for this item shall be
made distributing in each bill on the basis of percentage progress of the
whole wo Engineer's site office of minimum 15 sqm plinth area with
providing necessary facilities including office furniture, consumables,
stationeries, water purifier etc.

02 A N/A Providing compacted sub-base course with well graded material of Cum 2194.00 Fill By Auto Auto Auto
crushed well burnt picked jhama / 1st class brick bats and sand (FM 0.8) Tenderer/Consultant
with mixing proportion 2 : 1 having compacted thickness made as per - Money Positive(3
specification including local handling, spreading uniformly to proper digits after decimal)
grade camber and super elevation, packing, rolling properly with 8 to 10
ton capacity power driven road roller and watering properly for
compaction of 100% MDD (standard) blinding with sand including cost of
fuel, lubricants, spares, maintenance, driver etc. all complete and
accepted by the Engineer-in-charge.

03 A N/A One layer brick flat soling in foundation or in floor with first class/picked Sqm 17600.00 Fill By Auto Auto Auto
jhama bricks (BDS 208) including preparation of bed and filling the Tenderer/Consultant
 interstices with local sand, leveling etc. complete and accepted by the - Money Positive(3
Engineer-in-charge. digits after decimal)

04 A N/A Providing compacted aggregate base type-I with graded metal of Crushed Cum 850.00 Fill By Auto Auto Auto
boulder< 9mm, Crushed boulder< 25mm, Crushed boulder < 38mm and Tenderer/Consultant
Sylhet sand F.M >1.00 @ ratio of (2:1) (Crushed boulder : Sand) having - Money Positive(3
compacted thickness of 150mm including local handling spreading digits after decimal)
uniformly to proper grade and camber and super elevation, hand packing,
rolling properly with 7-10 tone vibratory roller and watering profusely for
proper consolidation with blending materials etc. in/c. cost of all
materials complete as per direction of the Engineer-in-charge (Payment
will be made on compacted volume and compaction of 98% MDD in
Modified Proctor Test).

05(a) A N/A Reinforced cement concrete works with minimum cement content relates Cum 235.00 Fill By Auto Auto Auto
to mix ratio 1:1.5:3 having maximum water cement ratio = 0.40 and Tenderer/Consultant
minimum f'cr = 33.5 MPa, satisfying a specified compressive strength f?c - Money Positive(3
= 25 MPa at 28 days on standard cylinders as per standard practice of digits after decimal)
Code ACI / BNBC, Cement conforming to BDS EN-197-1-CEM-I, 52.5N,
best quality Sylhet sand or coarse sand of equivalent F.M. 2.2 and 20 mm
down well graded stone chips conforming to ASTM C-33 (Aggregate
grading as per table shown in technical specification), conducting
necessary tests, making and placing shutter in position and maintaining
true to plumb, making shutter water-tight properly, placing reinforcement
in position; mixing with standard mixer machine with hopper, fed by
standard measuring boxes, casting in forms, compacting by vibrator
machine and curing at least for 28 days, removing centering-shuttering
after specified time approved; including cost of water, electricity, other
charges etc. all complete, approved and accepted by the Engineer-in-
charge.
(Rate is excluding laboratory test fees, the cost of reinforcement and its
fabrication, placing, binding etc. and the cost of shuttering & centering)
(a) Individual & combined footing, pile cap, raft/mat, floor slab and
foundation beam up to plinth level

05(b) A N/A (b) Pedestals, column, column capital, lift wall and RCC wall up to ground Cum 190.00 Fill By Auto Auto Auto
floor Tenderer/Consultant
- Money Positive(3
digits after decimal)

05(c) A N/A (c) Floor/ roof slab, T-beam, L-beam and rectangular beam, tie beam, Cum 115.00 Fill By Auto Auto Auto
lintel, stair case slab and steps etc. up to ground floor Tenderer/Consultant
- Money Positive(3
digits after decimal)

06 A N/A Reinforced cement concrete works from Ready-Mix concrete with Cum 1795.00 Fill By Auto Auto Auto
minimum cement content relates to approved mix ratio having minimum Tenderer/Consultant
f'cr = 33.5 MPa, satisfying a specified compressive strength f'c = 25 MPa - Money Positive(3
at 28 days on standard cylinders as per standard practice of Code ACI / digits after decimal)
BNBC, Cement conforming to BDS EN-197-1-CEM-I, 52.5N, best quality
Sylhet sand or coarse sand of equivalent F.M. 2.2 and 20 mm down well
graded stone chips conforming to ASTM C-33 (Aggregate grading as per
table shown in appendix), High-range water reducing chemical admixture
Type-G under ASTM C494 (Doses to be applied as per Manufacturer's
Guideline) making and placing shutter in position and maintaining true to
plumb, making shutter water-tight properly, placing reinforcement in
position; using machine batched and machine mixed concrete using
cement content as per approved design mix (minimum 385 kg/ cum),
carrying to the site of laying using Transit Mixer (considering setting time
of concrete from plant to the site), including pumping of concrete using
line pump or boom placer to site of laying, maintaining allowable slump
of 100mm to150mm (measured at site), casting in forms, compacting by
vibrator machine and curing at least for 28 days, removing centering-
shuttering after specified time approved; including cost of water,
electricity, cost of all materials and other charges etc. all complete,
approved and accepted by the Engineer-in- charge.
(Rate is excluding laboratory test fees, the cost of reinforcement and its
fabrication, placing, binding etc. and the cost of shuttering & centering).
(Foundation to 4th floor)

07 A N/A Grade 400 (B400DWR / B420DWR: complying BDS ISO 6935-2:2016 / Kg 325000.00 Fill By Auto Auto Auto
ASTM A615) ribbed or deformed bar produced and marked according to Tenderer/Consultant
Bangladesh standard, with minimum yield strength, fy (ReH)= 400 MPa - Money Positive(3
but fy not exceeding 480 MPa and whatever is the actual yield strength digits after decimal)
within allowable limit as per BNBC/ ACI 318, the ratio of ultimate tensile
strength fu to yield strength fy, shall be at least 1.25 and minimum
elongation after fracture and minimum total elongation at maximum
force is 17% and 8% respectively : up to ground floor.

08 A N/A Supply Fitting Fixng 25mm thick Cork Sheet for use in expansion joint of Sqm 150.00 Fill By Auto Auto Auto
RCC pavement including cost of all materials and labour charge etc. as Tenderer/Consultant
per direction. - Money Positive(3
digits after decimal)

09 A N/A Supplying and laying of single layer polythene sheet weighing one Sqm 6200.00 Fill By Auto Auto Auto
kilogram per 6.5 square meter in floor or anywhere below cement Tenderer/Consultant
concrete complete in all respect and accepted by Engineer-in-charge. - Money Positive(3
digits after decimal)

10 A N/A Providing expansion joints across the R.C.C. road pavement with 20 mm Meter 320.00 Fill By Auto Auto Auto
gap between the adjacent panels. Supplying dowel bars of size 12 mm Tenderer/Consultant
dia and 600 mm long M.S rod placed @ 750 mm c/c. 300 mm of the bar - Money Positive(3
being fixed within one slab keeping remaining portion the bar free within digits after decimal)
the adjacent slab being inserted in 20 mm dia and 300 mm long P.V.C.
 pipe embedded in the slab, inside of pipe fully greased, filling the gap
between the slabs (with admixture) of hot bitumen and coarse sand (F.M.
2.2) in proportion of 2:1, finishing the top with bitumen, spreading coarse
sand over the joint, all complete as per plan, drawing and accepted by the
Engineer-in-charge.

11 A N/A Supplying and fitting fixing Above 10mm. dia M.S. reinforce-ment Kg 11800.00 Fill By Auto Auto Auto
including fabrication, cutting to sizes, bending, binding, erection, hooking Tenderer/Consultant
etc. complete with binding wire as required (No measurement will be - Money Positive(3
given for over laping and wastage for cutting). digits after decimal)

12 A N/A Extra rate over item No.11, Chapt.II of SR/2005 for plain round M.S, rods Each 6080.00 Fill By Auto Auto Auto
fitted and fixed as dowels of concrete pavement joints. Rods shall be cut Tenderer/Consultant
to required sizes with hacksaw blade, painted with two coats of - Money Positive(3
anticorrosive epoxy paint after necessary preparation of the surface and digits after decimal)
then lubricated with form oil/grease etc., placed and fixed firmly in
proportion position and alignment.

13 A N/A Supplying and fitting fixing upto 25mm dia M.S. cap upto 150mm long Each 1020.00 Fill By Auto Auto Auto
dowel bars (excluding cost of dowel bar) including filling the gap with Tenderer/Consultant
bitumen/grease etc. painting the ½ portion of the dowel bar etc. for - Money Positive(3
expansion joint as per direction and design. digits after decimal)

14 A N/A Filling up construction joints of concrete pavement with sand and Meter 2160.00 Fill By Auto Auto Auto
bitumen mixture as per direction including necessary cleaning of the Tenderer/Consultant
joints etc. - Money Positive(3
digits after decimal)

15 A N/A Minimum 12 mm thick cement sand (F.M. 1.2) plaster (1:4) with fresh Sqm 1550.00 Fill By Auto Auto Auto
cement to both inner-and outer surface of wall, finishing the corner and Tenderer/Consultant
edges including washing of sand, cleaning the surface, curing at least for - Money Positive(3
7 days, cost of water, electricity, scaffolding and other charges etc. all digits after decimal)
complete in all respect as per drawing and accepted by the Engineer-in-
charge. (Cement: CEM-II/B-M)
Ground floor.

16 A N/A Exterior premium acrylic emulsion paint of approved best quality and Sqm 525.00 Fill By Auto Auto Auto
color with high performance against dirt picking tendency and Tenderer/Consultant
efflorescence resistance properties along with water resisting properties - Money Positive(3
and resistance properties against fungi, fading and flaking from digits after decimal)
authorized local agent of the manufacturer in a sealed container; applying
to exterior surface with surface preparation including cleaning drying,
making free from dirt, grease, wax, removing all chalked and scaled
materials, fungus, mending good the surface defects using sand paper
and necessary scaffolding; applying necessary exterior sealer of
specified brand on prepared surface; then applying necessary exterior
putty of specified brand for levelling, spot filling, crack filling and cutting
by sand paper/zero water paper; finally applying 2 coats of exterior
emulsion paint spreading by brush/roller/spray & necessary scaffolding
etc. up to desired finishing, elapsing specified time for drying or recoating;
all complete in all floors and accepted by the Engineer-in-charge.

17 A N/A Interior premium acrylic emulsion painting (silky finish) of approved best Sqm 895.00 Fill By Auto Auto Auto
quality and colour delivered from authorized local agent of the Tenderer/Consultant
manufacturer in a sealed container; applying to interior wall and ceiling - Money Positive(3
with surface preparation including cleaning drying, making free from dirt, digits after decimal)
grease, wax, removing all chalked and scaled materials, fungus, mending
good the surface defects using sand paper and necessary scaffolding;
applying necessary interior sealer of specified brand on prepared surface;
then applying necessary interior putty of specified brand for levelling, spot
filling, crack filling and cutting by sand paper/zero water paper; finally
applying 2 coats of interior emulsion paint spreading by
brush/roller/spray & necessary scaffolding etc. up to desired finishing,
elapsing specified time for drying or recoating; all complete in all floors
and accepted by the Engineer-in-charge.

18 A N/A Premium synthetic enamel paint of approved best quality and colour Sqm 200.00 Fill By Auto Auto Auto
delivered from authorized local agent of the manufacturer in a sealed Tenderer/Consultant
container, having high water resistance, high bondibility, flexibility - Money Positive(3
property; using specified brand thinner applying to metallic or wooden digits after decimal)
surface by brass/roller/spray in two coats over single coat anti-corrosive
coating including cleaning, drying, making free from dirt, grease, wax,
removing all chalked and scaled materials, all complete in all floors and
accepted by the Engineer-in-charge.

19 A N/A Bailing out water by 1 cusec electricity operated pump including hire Per hour 250.00 Fill By Auto Auto Auto
charge of pump, fuel, operator, spares and maintenance etc. all complete Tenderer/Consultant
and accepted by the Engineer-in-charge. - Money Positive(3
digits after decimal)

20 A N/A Palisading work by supplying of bitumen drum sheet walling tied with 20 Sqm 410.00 Fill By Auto Auto Auto
BWG G.I. wire fixing the same with already driven borrak bamboo posts Tenderer/Consultant
with half split borrak bamboo runners @ 450mm c/c horizontally with iron - Money Positive(3
nails, G.I wire etc. all complete and accepted by the Engineer-in-charge. digits after decimal)
(Rate is excluding the cost of bamboo post).

21 A N/A Providing 3 sets as-built drawings subject to Engineer's approval Per Tender 1.00 Fill By Auto Auto Auto
produced in AutoCAD software in 584.5 mm x 413.5 mm (A-2 size) Tenderer/Consultant
standard drawing paper, and operating and maintenance manual of the - Money Positive(3
equipment and plant incorporated in the works, if any, in original by the digits after decimal)
date stated in the particular conditions of contract (PCC). If the
contractor does not supply the as-built drawings and operating &
maintenance manuals by the date stated in the particular conditions of
contract (PCC), or they do not receive the Engineer- in-charge's approval,
 the Engineer-in-charge shall
withhold the amount stated in the PCC from the payments due to the
contractor. The as-built drawings must show the permanent works as
actually constructed and reflect the revision of drawings supplied to the
contractor during the Contract as well as revisions of drawings supplied
to the contractor during the contract.
(One set of as-built drawings shall be considered for measurement and
payment)

22(a) A N/A Supplying different inside dia best quality uPVC soil, waste and ventilation Meter 180.00 Fill By Auto Auto Auto
pipe having specific gravity 1.35 - 1.45, wall thickness 2.5 mm - 3.0 mm, Tenderer/Consultant
and other physical, chemical, thermal, fire resistivity properties etc. as per - Money Positive(3
BSTI approved manufacturer standards or ASTM, BS/ISO/IS standards digits after decimal)
fitting and fixing in position with sockets, bends, of uPVC Pipe with all
accessories such as Round grating/ domed roof grating bands, sockets
etc. approved and accepted by the Engineer-in-charge.
(a) 50 mm inside dia wall thickness 2.5 mm - 3.0 mm

22(b) A N/A (b) 100 mm inside dia wall thickness 3.4- 4.0 mm Meter 120.00 Fill By Auto Auto Auto
Tenderer/Consultant
- Money Positive(3
digits after decimal)

23 A N/A Minimum 12 mm thick cement sand (F.M. 1.2) plaster with neat cement Sqm 820.00 Fill By Auto Auto Auto
finishing to plinth wall with cement (1:4) up to 150 mm below ground level Tenderer/Consultant
including washing of sand, finishing the edges and corners and curing at - Money Positive(3
least for 7 days, cost of water, electricity, scaffolding and other charges digits after decimal)
etc. all complete in all respect as per drawing and accepted by the
Engineer-in-charge. (Cement: CEM-II/B-M)
Ground floor.

24 A N/A 125 mm brick works with first class bricks with cement sand (F.M. 1.2) Sqm 532.00 Fill By Auto Auto Auto
mortar (1:4) and making bond with connected walls including necessary Tenderer/Consultant
scaffolding, raking out joints, cleaning and soaking the bricks for at least - Money Positive(3
24 hours before use and washing of sand, curing at least for 7 days in all digits after decimal)
floors including cost of water, electricity and other charges etc. all
complete and accepted by the Engineer-in-charge. (Cement: CEM-II/B-M)
In ground floor .

25 A N/A Brick works with first class bricks with cement sand (F.M. 1.2) mortar Cum 3.00 Fill By Auto Auto Auto
(1:4) in exterior walls including filling the interstices with mortar, raking Tenderer/Consultant
out joints, cleaning and socking the bricks at least for 24 hours before - Money Positive(3
use and washing of sand, necessary scaffolding, curing at least for 7 digits after decimal)
days etc. all complete including cost of water, electricity and other
charges (measurement to given as 250 mm width for one brick length
and 375 mm for one brick and a half brick length) accepted by the
Engineer-in-charge.
(Cement: CEM-II/B-M) In ground floor

26 A N/A Mild steel, grade 250 with minimum fy = 250 MPa, work in roof truss: Kg 7100.00 Fill By Auto Auto Auto
supplying and fabrication of mild steel sections as per design, hoisting, Tenderer/Consultant
fitting and fixing in position with bolt and nuts or rivets or welds and - Money Positive(3
providing two coats of anti-corrosive paint over a prime coat of red oxide digits after decimal)
paint etc. complete and accepted by the Engineer-in-charge.
(Measurement to be given for truss member only).

27 A N/A Supplying, fitting and fixing of G.I. pipe with all special fittings, such as Meter 75.00 Fill By Auto Auto Auto
bends, elbows, sockets, reducing sockets, Tee, unions, jam-nuts etc. Tenderer/Consultant
including cutting trenches where necessary and fitting the same with - Money Positive(3
earth duly rammed and fixing in walls with holder bats and making hole in digits after decimal)
floors, walls and consequent mending good the damages etc. all
complete in all respects approved and accepted by the Engineer- in-
charge.
40 mm dia G.I. pipe with wall thickness 3.25 mm, outside diameter min
46.5 mm, weight 3.83 kg/m, can withstand min 50 kg/cm2 hydraulic
pressure

28 A N/A Providing and making point welding at contact point of the spiral binders Point 1120.00 Fill By Auto Auto Auto
at reasonable intervals with the main reinforcements by electric arc Tenderer/Consultant
welding for construction of cast in situ bored pile carefully with highly - Money Positive(3
oxidized electrodes, making the points prominent and accepted by the digits after decimal)
Engineer-in-charge.
(Rate is inclusive of all materials labour, tools and plants, electricity and
all equipment).

29 A N/A Providing and making welded splice over two sides of contact by welding Meter 61.00 Fill By Auto Auto Auto
of minimum 300 mm length at the lap of main reinforcement in re-bar Tenderer/Consultant
cage to be placed in bore-hole where necessary by electric arc welding - Money Positive(3
with highly oxidized electrodes making the joint prominent all complete digits after decimal)
and accepted by the Engineer-in-charge. (Rate is inclusive of all materials,
labour, tools & plants, electricity and all equipments).

30 A N/A Supplying, fitting and fixing of aluminium sliding window with mosquito Sqm 35.50 Fill By Auto Auto Auto
mesh as per the U.S. Architectural Aluminium Manufacturer's Association Tenderer/Consultant
(AAMA) standard specification and BDS 1879:2014 having minimum 1.2 - Money Positive(3
mm thick outer bottom (95.00 mm, 38.00 mm outer bottom, 0.72 kg/m), digits after decimal)
minimum 1.2 mm thick outer top (95.00 mm, 28.5 mm outer top, 0.75
kg/m), minimum 1.2 mm thick shutter top (size 33
mm, 26.80 mm, 0.42 kg/m), minimum 1.2 mm thick shutter bottom (size
60 mm, 24.40 mm, 0.589 kg/m), minimum 1.2 mm thick outer side (95.00
mm, 19.50 mm outer side ,0.591 kg/m), minimum 1.2 mm thick shutter
lock (size 49.20 mm 25.80 mm, 0.543 kg/m) and minimum 1.2 mm thick
inter lock (size 34.40 mm, 32.13 mm, 0.562 kg/m) sections all aluminium
members will be anodized to aluminium bronze/silver/ss/black colour
 with a coat not less than 15 microns in thickness or powder coated to any
colour with a coat not less than 25 microns in thickness and density of 4
mg per square cm etc. including all accessories like sliding door key lock,
sliding door wheel, sliding door mohiar, sliding door neoprene, bolts and
nuts including sealants, keeping provision for fitting 5 mm thick glass
including labour charge for fitting of accessories, making grooves and
mending good damages, carriage, and electricity complete in all respect
as per drawing and accepted by the Engineer-in-charge.
Size up to: 1524 mm x 1372 mm
Anodized to s.s colour/ black colour

31 A N/A Dismantling of unserviceable/damaged brick works (with cement or lime Cum 45.00 Fill By Auto Auto Auto
mortar) of thickness 250 mm in foundation and superstructure and Tenderer/Consultant
removal of debris to a safe distance. - Money Positive(3
digits after decimal)

32 A N/A Dismantling of R.C.C. beam, lintel, column, drop wall, sun shade from any Cum 53.00 Fill By Auto Auto Auto
height and removal of debris to a safe distance. Tenderer/Consultant
- Money Positive(3
digits after decimal)

33 A N/A 38 mm thick artificial patent stone (1:2:4) flooring with cement, best Sqm 235.00 Fill By Auto Auto Auto
quality coarse sand (50% quantity of Sylhet sand or coarse sand of Tenderer/Consultant
equivalent F.M. 2.2 and 50% best quality local sand of FM 1.2) and 12 mm - Money Positive(3
down well graded brick chips including breaking chips, screening, laying digits after decimal)
the concrete in alternate panels, compacting and finishing the top with
neat cement and curing at least for 7 days in all floors including cost of
water, electricity and other charges etc. all complete and accepted by the
Engineer-in-charge. (Cement: CEM-II/A-M) In ground floor

34 A N/A Earth Compaction on yard by 8 to 10ton roller. proper camber including Sqm 5660.00 Fill By Auto Auto Auto
spreading the spoils uniformly over the flank, watering , rolling to proper Tenderer/Consultant
grade etc. complete as per direction. - Money Positive(3
Rate similar to Item (4a-4b) digits after decimal)

35 A N/A Providing and maintenance one project profile signboards to be placed at Sqm 2.00 Fill By Auto Auto Auto
a suitable place of the site including submission of proposals for the Tenderer/Consultant
materials of the signboards and text layout containing 3D picture, safety - Money Positive(3
instructions, project information with security light etc. to the Engineer-in- digits after decimal)
charge for approval which will be positioned as directed by the Engineer-
in-charge and removing the same on completion of the works or as
instructed by the Engineer-in-charge.

36 A N/A Supplying, fitting and fixing country made mirror polished homogeneous Sqm 290.00 Fill By Auto Auto Auto
floor tiles complying BDS ISO 13006: 2015, water absorption ≤ 0.5%, Tenderer/Consultant
modulus of rupture (MOR) ≥ 27 N/mm2, irrespective of color &/or design, - Money Positive(3
with 20 mm thick cement sand (F.M. 1.2) mortar (1:4) base and raking out digits after decimal)
the joints with white cement including cutting and laying the tiles in
proper way and finishing with care etc. all complete and accepted by the
Engineer-in-charge. (Cement: CEM-II/B-M) In ground floor
GP (mirror polished) 600 mm x 600 mm floor tiles

37 A N/A Supplying, fitting and fixing country made glazed wall tiles complying BDS Sqm 90.00 Fill By Auto Auto Auto
ISO 13006: 2015, irrespective of color &/or design, with 20 mm thick Tenderer/Consultant
cement sand (F.M. 1.2) mortar (1:3) base and raking out the joints with - Money Positive(3
white cement including cutting, laying and hire charge of machine and digits after decimal)
finishing with care etc. including cost of water, electricity and other
charges complete in all respect and accepted by the Engineer-in-charge.
(Cement: CEM-II/A-M). In ground floor.
Wall tiles more than 250 mm x 400 mm & less than or equal to 300 mm x
600 mm in sizes

38 A N/A Supplying, fitting and fixing country made GP homogeneous stair tiles Sqm 40.00 Fill By Auto Auto Auto
having non skidding offsets, complying BDS ISO 13006: 2015, water Tenderer/Consultant
absorbtion ≤ 0.5%, modulus of rupture (MOR) ≥ 27 N/mm2, irrespective of - Money Positive(3
color &/or design, with cement sand (F.M. 1.2) mortar (1:4) base and digits after decimal)
raking out the joints with white cement including cutting and laying the
tiles in proper way and finishing with care etc. all complete and accepted
by the Engineer-in-charge. (Cement: CEM-II/A-M) In ground floor.
Glazed stair tiles having size of width 250 mm to 300 mm and length 325
mm to 600 mm .

39 A N/A Construction of septic tank(200 users)of different sizes with walls of Each 1.00 Fill By Auto Auto Auto
brick work in cement mortar (1:6) having a lining of minimum 125 mm Tenderer/Consultant
R.C.C cast against the walls as per approved type plan over a brick flat - Money Positive(3
soling and 150 mm thick reinforced cement concrete flooring (1:2:4) with digits after decimal)
125 mm thick walls in partition and 12 mm thick cement plaster (1:4) with
N.C.F. to insides of walls on floor and all around outside walls by 450 mm
height at top including supplying, fitting and fixing of two R.C.C. Tees and
providing 450 mm dia water sealed heavy type C.I. manhole cover with
locking/unlocking arrangement and 100 mm thick R.C.C (1:2:4) top slab,
including centering, shuttering, fabricating, casting and curing etc.
complete up to required depth including necessary earth work in
excavation and shoring, bailing out water and side filling including the
cost of all materials, operations and incidental charges. etc. all complete
as per type plan approved and accepted by the Engineer-in-charge (Rate
is including cost of reinforcement and its fabrication, binding and
placing).

40 A N/A Supplying, fitting and fixing of the best quality any size uPVC plastic door Sqm 4.50 Fill By Auto Auto Auto
shutter with frame having specific gravity of 1.35 - 1.45, panel wall Tenderer/Consultant
thickness 2.4 mm-2.76 mm, shutter/panel thickness 37.5 mm & weighing - Money Positive(3
27.00 kg/m2 and other physical, chemical, thermal, fire resistivity digits after decimal)
properties etc. as per BSTI approved manufacturer standards or ASTM,
 BS/ISO/IS standards and cosmic /Foam /aristocrat or equivalent
standards of different sizes uPVC plastic door shutter with uPVC plastic
frame (frame size:150mm x 62.50mm) fitting - fixing in brick wall/ R.C.C
wall with at least 3 Nos. SS hinges by min 64 Nos. Ø 3.17 mm and 3.97
mm 12.7 mm long rivets, 24 nos. 25.4 mm SS screws, Ø 9.38 mm, 150
mm long SS tower bolts 2 nos., 146 mm SS handle by rivet, 6 Nos. GI
clamp, 6 Nos. G.I inner joint, 234.95 mm x 127 mm clamp, 76.2 mm x
57.15 mm, including making necessary grooves and mending good the
damages, finishing, curing, local carriage etc. complete in all respect and
accepted by the Engineer-in-charge.

41 A N/A Supplying, fitting and fixing of PP-R Pipe for water supply sustaining Meter 100.00 Fill By Auto Auto Auto
minimum water pressure PN 20, fulfilling corresponding standard Tenderer/Consultant
dimension ratio SDR meeting the performance & long-term strength - Money Positive(3
requirements as per DIN 8077/ 78 or ASTM F 2983 including nipple, digits after decimal)
elbow, reducers, Tee, end cap, plug, socket etc. as per manufacturer
instruction all complete accepted by the Engineer in-charge.
19 mm dia, minimum wall thickness 3.5 mm

42 A N/A Supplying, fitting and fixing of PP-R Union meeting the performance & Each 9.00 Fill By Auto Auto Auto
long-term strength requirements of ASTM F2389 in accordance with the Tenderer/Consultant
manufacturer's specifications all complete accepted by the Engineer-in- - Money Positive(3
charge. digits after decimal)
19 mm PP-R Union

43 A N/A Supplying, fitting and fixing of PP-R Gate Valve meeting the perfomance Each 9.00 Fill By Auto Auto Auto
and long-tem strength requirements of ASTM F 2389 in accordance with Tenderer/Consultant
the manufacturer's specifications all complete accepted by the Engineer- - Money Positive(3
in- charge. digits after decimal)
19 mm PP-R Gate Valve

44 A N/A Supplying, fitting and fixing of best quality surface mounted or conceal Each 9.00 Fill By Auto Auto Auto
stop cock/angle stop cock (lever or round headed) with wall flange Tenderer/Consultant
chromium plated. The faucet conforms BDS EN 200:2009. The faucet tap - Money Positive(3
shall be free from any leakage, permeation and other abnormalities. The digits after decimal)
water hammer value shall be 1.47 MPa or under. The faucet after it has
been operated 100000 times it shall be free from a seat- leakage and
shall satisfy the reverse flow preventing performance. The inside and
outside surfaces of the faucet shall be smooth and be free from
blowholes, fissures, remarkable flows or injurious defects. The chromium
plating on the faucet shall be of class 2 grade 1. The final coating should
be done with chromium of minimum 0.1 micron. The faucet shall be
made
leak proof and fixing in position with selected tape etc. all complete
approved and accepted by the Engineer-in-charge.
12 mm dia CP Concealed Stop Cock

45 A N/A Supplying, fitting and fixing of best quality country made 12 mm bib cock Each 6.00 Fill By Auto Auto Auto
made from copper or copper alloy, chromium plated. The faucet Tenderer/Consultant
conforms BDS EN 200:2009. The faucet tap shall be free from any - Money Positive(3
leakage, permeation and other abnormalities. The water hammer value digits after decimal)
shall be 1.47 MPa or under. The faucet after it has been operated 100000
times it shall be free from a seat- leakage and shall satisfy the reverse
flow preventing performance. The inside and outside surfaces of the
faucet shall be smooth and be free from blowholes, fissures, remarkable
flows or injurious defects. The chromium plating on the faucet shall be of
class 2 grade 1. The final coating should be done with chromium of
minimum 0.1 micron. The faucet shall be made leak proof and fixing in
position with selected tape etc. all complete approved and accepted by
the Engineer- in- charge.
12 mm CP open Bib Cock

46 A N/A Supplying, fitting and fixing of best quality pillar cock made from copper Each 3.00 Fill By Auto Auto Auto
or copper alloy, chromium plated materials. The faucet conforms BDS EN Tenderer/Consultant
200:2009. The faucet tap shall be free from any leakage, permeation and - Money Positive(3
other abnormalities. The water hammer value shall be 1.47 MPa or under. digits after decimal)
The faucet after it has been operated 100000 times it shall be free from a
seat- leakage and shall satisfy the reverse flow preventing performance.
The inside and outside surfaces of the faucet shall be smooth and be free
from blowholes, fissures, remarkable flows or injurious defects. The
chromium plating on the faucet shall be of class 2 grade 1. The final
coating should be done with chromium of minimum 0.1 micron. The
faucet shall be made leak proof and fixing in position with selected tape
etc. all complete approved and accepted by the Engineer-in-charge.
CP Single lever pillar cock (High top 12'')

47 A N/A Supplying different inside dia best quality uPVC clean out / trap having Each 6.00 Fill By Auto Auto Auto
specific gravity 1.35 -1.45 and other physical, chemical, themal, fire Tenderer/Consultant
resistivity properties etc. as per BSTI approved manufacturer standards - Money Positive(3
or ASTM, BS/ISO/IS standards, fitting and fixing in position etc. complete digits after decimal)
approved and accepted by the Engineer- in- charge
100 mm dia uPVC ?P? or ?S? trap

48 A N/A Supplying, fitting and fixing of super quality 600 mm x 125 mm coloured Each 3.00 Fill By Auto Auto Auto
glass shelf having 5 mm thickness with fancy C.P. brackets, screws and Tenderer/Consultant
frames including making holes in walls and mending good the damages - Money Positive(3
with cement mortar (1:4) etc. all complete approved and accepted by the digits after decimal)
Engineer- in- charge.

49 A N/A Supplying, fitting and fixing of standard size country made soap tray Each 9.00 Fill By Auto Auto Auto
including making holes in walls and mending good the damages with Tenderer/Consultant
cement mortar (1:4) etc. all complete approved and accepted by the - Money Positive(3
Engineer-in-charge. digits after decimal)
PVC soap tray
50 A N/A Supplying, fitting and fixing of 5 mm thick unframed super quality double Sqm 1.00 Fill By Auto Auto Auto
coated mirror with all necessary fitting including making holes in walls Tenderer/Consultant
and mending good the damages with cement mortar (1:4) etc. all - Money Positive(3
complete approved and accepted by the Engineer-in-charge. digits after decimal)
Local Mirror, 5 mm thickness

51 A N/A Construction and placing of R.C.C inspection pit cover (slab) with Each 3.00 Fill By Auto Auto Auto
supplying and provisions for placing, fitting, fixing 450 mm dia C.I. man- Tenderer/Consultant
hole cover with locking/un-locking arrangement including concrete (1:2:4) - Money Positive(3
with approx. 1% re-enforcement, necessary earth cutting, or cleaning, side digits after decimal)
filling, curing etc. with minimum 12 mm cement plaster (1:4) and neat
cement finishing on edges and top all complete and accepted by the
Engineer- in- charge.
950 mm x 950 mm x 75 mm R.C.C. pit cover with 450 mm dia C.I.
manhole cover.

52 A N/A Construction of masonry inspection pit with 250 mm thick brick work in Each 3.00 Fill By Auto Auto Auto
cement mortar (1:4) including necessary earth work, side filling and one Tenderer/Consultant
layer brick flat soling, 75 mm thick (1:3:6) base concrete for making invert - Money Positive(3
channel and 12 mm thick (1:2) cement plaster with neat finishing etc. all digits after decimal)
complete up to a depth of 700 mm approved and accepted by the
Engineer-in-charge.
Clear 600 x 600 mm and depth 750 mm to 900 mm, average 825 mm for
single 300 mm dia R.C.C. pipes and 400 mm PVC pipe.

53(a) A N/A Supplying, fitting and fixing of G.I. pipe with all special fittings, such as Meter 60.00 Fill By Auto Auto Auto
bends, elbows, sockets,reducing sockets, Tee, unions, jam-nuts etc. Tenderer/Consultant
including cutting trenches where necessary and fitting the same with - Money Positive(3
earth duly rammed and fixing in walls with holder bats and making hole in digits after decimal)
floors, walls and consequent mending good the damages etc. all
complete in all respects approved and accepted by the Engineer- in-
charge.

(a) 25 mm dia G.I. pipe with wall thickness 3.35 mm, outside diameter
min 31.7 mm, weight 2.59 kg/m, can withstand min 50 kg/cm2 hydraulic
pressure.

53(b) A N/A (b) 50 mm dia G.I. pipe with wall thickness 3.65 mm, outside diameter Meter 90.00 Fill By Auto Auto Auto
min 57.3 mm, weight 5.38 kg/m, can withstand min 50 kg/cm2 hydraulic Tenderer/Consultant
pressure. - Money Positive(3
digits after decimal)

54 A N/A Supplying, fitting and fixing of country made glazed vitreous W/H wash Each 3.00 Fill By Auto Auto Auto
basin excluding pedestal. The sanitary ware shall conform Tenderer/Consultant
BDS1162:2014. The glaze shall be thoroughly fused to body. The - Money Positive(3
minimum thickness of body at any section shall be 5 mm. When digits after decimal)
assembled together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes or defects in
excess of those listed in BDS standard. The mean value of water
absorption shall not be greater than 0.5% of the ware when dry. When
tested with chemical solutions (Acetic acid, Citric acid, Detergent,
Hydrochloric acid, Sodium hydroxide, Sodium stearate and Sulfuric acid
of various strength) as per BDS1162:2014 procedure, none of the test
pieces should suffer any loss of reflectivity on the glaze. There shall be no
crazing and no stain on the ware. The materials used for making glaze
shall not contain lead compound. In case of certain coloring oxides used
for making colored glaze, the lead content, if any, shall not exceed 5
percent of the weight of the glaze materials. Appliances shall be clearly
and indelibly marked at a prominent place, visible even after the
appliances are installed with the following: a) manufacturer's name
and/or registered trademark, b) the number of Bangladesh standard and
c) country of origin. Each product shall also be marked with the BSTI
Certification Mark. The fixture should be placed in position with heavy
type C.I. Brackets. 30 mm dia PVC waste water pipe with brass coupling
(not exceeding 750 mm in length), basin waste with chain plug including
making holes in walls and floors and
fitting with wall, screws and mending good the damages, finishing etc. all
complete approved and accepted by the Engineer-in-charge.
Under Counter: Approx. 515 mm X 365 mm size, minimum weight 9.5 kg

55 A N/A Supplying, fitting and fixing of floor grating net in traps or in drains Each 9.00 Fill By Auto Auto Auto
including making holes in walls/ floors and mending good the damages Tenderer/Consultant
with cement mortar (1:4) etc. all complete approved and accepted by the - Money Positive(3
Engineer-in-charge of following type. digits after decimal)
Approx. 50 mm x 50 mm stainless steel floor grating net

56 A N/A Supplying, fitting and fixing of country made best quality towel rail/ ring/ Each 9.00 Fill By Auto Auto Auto
shelf minimum 20 mm in dia with C.P. holder including making holes in Tenderer/Consultant
walls and mending good the damages with cement mortar (1:4) etc. all - Money Positive(3
complete approved and accepted by the Engineer-in-charge. digits after decimal)
600 mm long C.P. single towel rail
(It/26.22.2 of PWD SR/2022 REVISED)

57 A N/A Supplying, fitting and fixing of 12 mm dia connection pipe approved and Each 9.00 Fill By Auto Auto Auto
accepted by the Engineer- in- charge. Tenderer/Consultant
600 mm long plastic flexible lead (connection) pipe - Money Positive(3
digits after decimal)

58 A N/A Supplying, laying, fitting and fixing of best quality HDPE soil, waste and meter 50.00 Fill By Auto Auto Auto
ventilation pipe having PE-100 (Hydrostatic Strength for PE-100 is 5.0 Tenderer/Consultant
MPa & 12.4 MPa at 80°c & 20°c respectively according to ISO - Money Positive(3
4427:2007(E), PN-6 (nominal pressure for PN-6 is 0.6 MPa according to digits after decimal)
ISO 4427:2007(E) & SDR 26 for soil, waste and ventilation pressure pipe
having density 0.940 ? 0.970 gm/cm3 and other physical, chemical,
 thermal, fire resistivity properties etc. as per BSTI approved manufacturer
standards or ASTM/BS/ISO/IS standards ,fitted and fixed in position with
necessary joints and fittings with all accessories complete approved and
accepted by the Engineer-in-charge. HDPE pipe of 110 mm outside dia
with wall thickness 4.2 mm - 4.8 mm

59 A N/A Supplying, fitting and fixing window grill made of 12 mm x 12 mm M.S. Sqm 35.00 Fill By Auto Auto Auto
solid bar @ 100mm c/c with outer frame of 38 mm x 6mm F.I. bar and 25 Tenderer/Consultant
mm x 6 mm F.I. bar for clamp as per design including fabrication, welding, - Money Positive(3
cost of electricity workshop charges, labour charges for fitting and fixing digits after decimal)
grills in position, local carriage charges, cutting grooves, mending good
the damages, tools and plants, finished with anti-corrosive painting (Red-
Oxide) etc. complete for all floors approved and accepted by the
Engineer-in-charge.
(Total weight per sqm should be approx. 19 kg and add or deduct @
100.00 for each kg/sqm excess or less respectively)

60 A N/A Supplying, fitting and fixing of European type country made best quality Each 6.00 Fill By Auto Auto Auto
glazed porcelain combi closet (two piece), including plastic seat cover Tenderer/Consultant
with soft closing, cistern system, water consumption 6 litre, siphon wash - Money Positive(3
down/siphon jet single or dual flushing system which reduce water digits after decimal)
consumption, hygienic glaze in toilet bowl, glaze in inner waste line, round
bowl, outlet range 280~305 mm. The sanitary ware shall conform
BDS1162:2014. The glaze shall be thoroughly fused to body. The
minimum thickness of body at any section shall be 5 mm. When
assembled together and when examined from a distance of 60 cm, the
outer surface shall not show to the unaided eye, blemishes or defects in
excess of those listed in BDS standard. The mean value of water
absorption shall not be greater than 0.5% of the ware when dry. When
tested with chemical solutions (Acetic acid, Citric acid, Detergent,
Hydrochloric acid, Sodium hydroxide, Sodium stearate and Sulfuric acid
of various strength) as per BDS1162:2014 procedure, none of the test
pieces should suffer any loss of reflectivity on the glaze. There shall be no
crazing and no stain on the ware. The materials used for making glaze
shall not contain lead compound. In case of certain coloring oxides used
for making colored glaze, the lead content, if any, shall not exceed 5
percent of the weight of the glaze materials. Appliances shall be clearly
and indelibly marked at a prominent place, visible even after the
appliances are installed with the following: a) manufacturer's name
and/or registered trademark, b) the number of Bangladesh standard and
c) country of origin. Each product shall also be marked with the BSTI
Certification Mark. The fixture should be placed in position preparing the
base with cement concrete and with wire mesh or rods if necessary, in all
floors including making holes wherever required and mending good the
damages and fitting, fixing, finishing, complete with all necessary fittings
and connection approved and accepted by the Engineer- in- charge.
Approx. 670~690 X 360~ 362 mm size, minimum 27.5 kg of weight;
Equivalent to Stella:Victoria/ Stella:Imola/ RAK:Amy/ RAK:Karla or similar
brand

61 A N/A Supplying and fitting-fixing hand / push shower for ablution including Each 6.00 Fill By Auto Auto Auto
holder etc. all complete approved and accepted by the Engineer- in- Tenderer/Consultant
charge. - Money Positive(3
Moving type hand shower digits after decimal)

62 A N/A Supplying, fitting and fixing of food graded plastic overhead water Each 4.00 Fill By Auto Auto Auto
reservoir tank including all necessary fittings, hardware and consumables Tenderer/Consultant
etc. all complete approved and accepted by the Engineer- in- charge. - Money Positive(3
2000 liter capacity digits after decimal)

63 A N/A Centering and shuttering, including strutting, propping etc. (The formwork Sqm 2160.00 Fill By Auto Auto Auto
must be rigid enough both in and out of plane, to make the concrete Tenderer/Consultant
surface true to the designed shape and size by using necessary MS - Money Positive(3
sheets of minimum 16 BWG, angles of minimum size 40 mm x 40 mm x 5 digits after decimal)
mm, flat bars etc.) and removal of form for :
In raft/mat/floor slab up to plinth level

64 A N/A Supplying, fitting and fixing of 38 mm thick well matured seasoned Sqm 20.00 Fill By Auto Auto Auto
(moisture content should be between 12% to 16%) solid wood single leaf Tenderer/Consultant
door shutter having stile section 100m x 38mm, top rail section 125mm x - Money Positive(3
38mm, lock rail section 100mm x 38mm and bottom rail section 225mm digits after decimal)
x 38mm (made from minimum 250mm wide plank) with 4nos 100mm
long, 3mm thick hinge, 12mm dia 250mm long tower bolt, 12mm dia
200mm long socket bolt, 2nos 150mm long handle, hinged cleats and
buffer blocks. All complete in all floors and accepted by the Engineer-in-
charge.
(All sizes of wood are finished)
Gamari (SS Fittings)

65 A N/A Supplying, fitting and fixing stainless steel (SS) stair railing of standard Sqm 115.00 Fill By Auto Auto Auto
height with 2 mm thick 62 mm dia SS pipe for hand-rail, 2 mm thick 40 Tenderer/Consultant
mm dia 5 nos vertical SS pipes in each flight, 1.5 mm thick 20 mm dia 5 - Money Positive(3
nos horizontal SS pipes as per drawing, design including carrying, digits after decimal)
polishing, fabricating, welding and fixing with tread by 25 mm long royal
bolt etc.all complete and accepted by the Engineer-in-charge.
66 A N/A Supplying and making door and window frames (Chowkat) for all floors Cum 0.40 Fill By Auto Auto Auto
including wall side grove cutting, moulding by CNC machine or any other Tenderer/Consultant
means with matured seasoned wood of required size including painting - Money Positive(3
two coats of coal tar to the surface in contact with wall, fitting and fixing digits after decimal)
in position etc. all complete and accepted by the Engineer-in-charge. (All
sizes of wood are finished). Frame made from seasoned Garjan/
Jam/Local Sal Wood
Up to Size 0'-2.5'' x 0'-6'' (finished)

67 A N/A Premium French polishing to door and window frames, shutter and any Sqm 50.00 Fill By Auto Auto Auto
other wooden surface by three coats over a coat of priming including Tenderer/Consultant
putty, cleaning, finishing and polishing with sand paper etc. all complete - Money Positive(3
in all floors and accepted by the Engineer-in-charge. digits after decimal)

68 A N/A Supply and use of water-reducing and retarding chemical admixture in Liter 50.00 Fill By Auto Auto Auto
concrete, complying ASTM C-494 Type - D of approved brand/ origin/ Tenderer/Consultant
manufacturer and supplied by only manufacturer's authorised dealer with - Money Positive(3
certificate of origin. The admixture to reduce the quantity of mixing water digits after decimal)
required to produce concrete of given consistency, i.e. low water-cement
(w/c) ratio and intend to retard setting time of concrete, specially for
layered, thick laid concrete etc.

69 A N/A Supplying and fitting fixing H.C.I. manhole cover 457mm dia 44mm thick Each 2.00 Fill By Auto Auto Auto
(heavy type) water tight Tenderer/Consultant
- Money Positive(3
digits after decimal)

70 A N/A Supplying and laying uPVC pipe for underground including fitting, fixing Meter 30.00 Fill By Auto Auto Auto
etc. all complete approved and accepted by the Engineer-in-charge. Tenderer/Consultant
315 mm dia with wall thickness 7.8 mm - 9.0 mm uPVC pipe - Money Positive(3
digits after decimal)

71 A N/A Supplying, fitting and fixing of best quality G.I. gate valve with sealant etc. Each 1.00 Fill By Auto Auto Auto
complete approved and accepted by the Engineer- in- charge. Tenderer/Consultant
50 mm brass gate valve - Money Positive(3
digits after decimal)

72 A N/A Sand Compaction Pile: Execution of sand compaction pile through Meter 45180.00 Fill By Auto Auto Auto
displacement method by using tripod rig, mechanical winch, special type Tenderer/Consultant
drop hammer (weighing minimum 1.00 ton) and casing pipe of inner - Money Positive(3
diameter 200mm to 300mm upto a maximum depth of 10.0m, digits after decimal)
Compacting the sand with desired sand volume and FM value of sand
upto desired relative density (60% to 65%), to attain the desired SPT value
between sand piles etc. complete including the cost of compacted sand
as per design, specification and direction of Engineer in charge.Pile
diameter: 300mm
Sand volumn 0.15 Cum/m, minimum FM=2.5

73 A N/A Mobilization and demobilization of boring equipment and man-power: at Per Site 1.00 Fill By Auto Auto Auto
site (drilling rig comprising drilling pipe, drop hammer, tripod, pulley, chain, Tenderer/Consultant
wrange, sample collection devices etc tools and plants; tripol for - Money Positive(3
temporary camp, necessary work-force etc) (Once for one site) digits after decimal)

74 A N/A Earth work in excavation in all kinds of soil for foundation trenches Cum 2625.00 Fill By Auto Auto Auto
including layout, providing center lines, local bench-mark pillars, levelling, Tenderer/Consultant
ramming and preparing the base, fixing bamboo spikes and marking - Money Positive(3
layout with chalk powder, providing necessary tools and plants, protecting digits after decimal)
and maintaining the trench dry etc., stacking, cleaning the excavated
earth at a safe distance out of the area enclosed by the layout etc. all
complete and accepted by the Engineer-in-charge, subject to submit
method statement of carrying out excavation work to the Engineer-in-
charge for approval. However, engineer's approval shall not relieve the
contractor of his responsibilities and obligations under the contract.
Earthwork in excavation in foundation trenches up to 1.5 m depth and
maximum 10 m lead

75 A N/A Sand filling in foundation trenches and plinth with sand having minimum Cum 3047.00 Fill By Auto Auto Auto
F.M. 0.8 in 150 mm layers including leveling, watering and compaction to Tenderer/Consultant
achieve minimum dry density of 95% with optimum moisture content - Money Positive(3
(Modified proctor test) by ramming each layer up to finished level as per digits after decimal)
design supplied by the design office only, all complete and accepted by
the Engineer-in-charge.

76 A N/A Carriage of materials such as sand, debris, brick bats etc. including Cum 2625.00 Fill By Auto Auto Auto
loading ,unloading and stacking at site or selected places as per Tenderer/Consultant
direction. - Money Positive(3
Up to 3 -by Truck digits after decimal)

77 A N/A Conducting plate load test as per ASTM D1194 or equivalent standard per test 1.00 Fill By Auto Auto Auto
providing required arrangement of three circular steel plates with Tenderer/Consultant
minimum thickness of 25 mm and varying in diameter from 305 mm to - Money Positive(3
762 mm respectively or square steel bearing plates of equivalent area for digits after decimal)
minimum 50 tons loading capacity of hydraulic or mechanical jack
assembly and applying load in 2 cycles with maintaining time interval of
each loading increment of not less than 15 minutes. Continue each test
until a peak load is reached or until the ratio of load increment to
settlement increment reaches a minimum, steady magnitude. If sufficient
load is available, continue the test until the total settlement reaches at
least 10 percent of the plate diameter, unless a well defined failure load is
observed and all other required materials, excavation, protection against
collapse, preparation of test pit, calibration of hydraulic jacks with
pressure gauge (with an error not exceeding ± 2 % of the load increment
used ) & dial gauges (an accuracy of at least 0.25 mm.) including plants
and equipment, platform for loading & unloading, mobilization,
 demobilization, hire charge of load testing equipment (joist, jacks and
other necessary devices), gunny bags, filling with sand & stitching gunny
bags, execution of tests by engineer, data acquisition and preparation of
test results in standard forms and other incidental charges as per
standard practice and procedures including submission of plate load test
report, furnishing all graphs and charts and with CD containing video of
sub-soil investigation operation of concerned site, all complete and
accepted by the Engineer-in-charge.

78 A N/A Providing expertise engineer having minimum qualification B.Sc. in Civil per month 2.00 Fill By Auto Auto Auto
Engineering and relevant experience(s) more than 10 years with Tenderer/Consultant
registration in respective professional body for project documentation, - Money Positive(3
progress study & adjustment, preparation of project material schedule digits after decimal)
and testing schedule for approval etc. & jobs assigned by the HOPE or his
official, at site.
(max. man month not greater than 1/4 of initial contract duration or
contract completion time whichever is less & payment for the item
subject to submission of CV & approved by HOPE or his authorized
officer).

79 A N/A Cleaning and dressing the site before and after work in/c leveling, L.S 1.00 Fill By Auto Auto Auto
dressing, widding out grass, up-rooting trees up to 150mm dia., cutting Tenderer/Consultant
jungles, removing water, removing all refuges etc. to a safe distance as - Money Positive(3
per direction digits after decimal)

Fill By Auto Auto Auto

Tenderer/Consultant
- Money Positive(3
digits after decimal)

Home | About e-GP | Contact Us | RSS Feed | Terms and Conditions | Service Level | Disclaimer and Privacy Policy | New Features
Best viewed in 1024 x 768 and above resolution. Browsers Tested & Certified by BPPA: Microsoft Edge 109.x or above and Mozilla Firefox 113.x or above and Google
Chrome 109.x or above

Copyright © 2011 Central Procurement Technical Unit (CPTU). All Rights Reserved.
IMED, Ministry of Planning, Government of the People's Republic of Bangladesh