Scribd
Upload
5 views

PRESENTATION[1]

Uploaded by

sabbathshema
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views

PRESENTATION[1]

Uploaded by

sabbathshema
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

Here are the basic components needed to make

a simple drone:
presented by valens ishimwe
MEE
lev2
FRAME
Drone Frame Rack Kit with Landing Gear Propeller Protective
RWF 35,000.00

1. Frame: This forms the main structure of the drone. It


can be made of materials like carbon fiber, plastic, or
aluminum alloy.
FRAME

• Width: 450mm
• Height: 55mm
• Motor Mount Bolt Holes: 16/19mm
• Wheelbase: 17.7in/450mm
• Net weight: 280g
Electronic Speed Controllers(ESCs)

• Electronic Speed Controllers(ESCs): These are


electronic devices that control the speed of the motors.

Brushless ESC HW30A 30A


RWF 13,000.00
Electronic Speed Controllers(ESCs)
• Weight: 25g/each
• Dimensions: 45 x 24 x 11mm
• Power input: 5.6V – 16.8V (2-3 cells Li-Poly, OR 5-12
cells Ni-MH Ni-MH / Ni-Cd battery) BEC: 2A
• Constant current: 30A (Max 40A less than 10 seconds)
• Safe power function:regardless of the throttle stick in
any position the motor will not start immediately Throttle
Calibration function:Adapt to different remote throttle
travel difference, improve throttle response linearity
Motors

• Motors: You'll typically need 4 brushless DC motors to


provide the lift and thrust for the drone.

XXD A2212 KV1000 Brushless


Motor
RWF 13,000.00
Flight Controller
Flight Controller: This is the "brain" of the drone that controls
the flight dynamics.
Drone fright controller Microzone MC6C 2.4GHz Radio Transmitter
with Receiver. RWF 103,000.00
Flight Controller

1.RF range: 2401MHZ—2479MHZ


2.RFpower: less than 100MW
3.Working current: less than 120MA
4.Working voltage: 4.5–8.5V
5.Modulation mode: FSK
6.Sensitivity: 1024
7.Weight(gross weight): 550G
Receiver

• Receiver: This allows the flight controller to receive


commands from the radio transmitter.

433M receiver + 433M wireless


transmitter Module
RWF 1,900.00
Receiver

• Wireless (RF) Simplex Transmitter and Receiver


• Receiver Operating Voltage: 3V to 12V
• Receiver Operating current: 5.5mA
• Operating frequency: 433 MHz
• Transmission Distance: 3 meters (without antenna) to 100
meters (maximum)
• Modulating Technique: ASK (Amplitude shift keying)
• Data Transmission speed: 10Kbps
• Circuit type: Saw resonator
BATTERY

• 4200mAh 3S 35C 11.1V Lipo Battery With XT60 Plug for


RC Plane
• RWF 87,000.00
BATTERY
• Battery: A lithium polymer (LiPo) battery pack provides the
power to run the drone's systems.
• Capacity: 4000mAh
• Cell Count: 3s
• Voltage: 11.1V
• Constant Discharge: 35C
• Peak Discharge: 70C
• Maximum Charge Rate: 5C
• Battery Size: 137 x 43 x 26mm
• Battery Weight: 324g

You might also like