JCB Attachments

Completing the solution

Agricultural Attachments Guide

www.jcb.com ATTACHMENTS
Maximum Performance. Maximum Efficiency
Here at JCB, we understand that an attachment should be able to make the most
of all the performance and productivity that we build into our machines. No mean
feat, but then, the latest JCB agricultural attachments are no ordinary tools.
This latest range takes full advantage of cutting-edge innovation and technology to
offer you ultimate efficiency and usability. Our attachments are designed with valuable
input from farmers all over the world, so you can rest assured that whichever one
you choose, it will meet your needs right down to the finest details.

Contents
Weld on Brackets .................................................................................................... 05

Bolt on Brackets ...................................................................................................... 06

Telescopic Handler Range ................................................................................... 09-30

Telemaster Range ............................................................................................... 33-52

Wheel Loader Range .......................................................................................... 55-66

Compact Excavator Range .................................................................................. 69-82

Skid Steer Range ................................................................................................. 85-96

Light Equipment Range ..................................................................................... 99-108

Material Weights ..................................................................................................... 111

AGRI

2
 BRACKETS
BRACKETS
Weld on Brackets .................................................................................................... 05

Bolt on Brackets ...................................................................................................... 06

ATTACHMENTS
ATTACHMENTS
Weld on Brackets

JCB Compact Tool Carrier

Product number Carriage
980/88043 Blank location bracket (pair)

JCB Tool Carrier

Product number Carriage
980/44700 Blank location bracket (pair)

JCB Q-Fit
Product number Carriage
980/88042 Blank location bracket (pair)

Pin & Cone

Product number Carriage
980/89852 Blank location bracket (pair)

Manitou
Product number Carriage
980/89867 Blank location bracket (pair)

5
Bolt on Brackets

Q-Fit Pin & Cone Industrial

Euro Compact Tool Carrier Tool Carrier

Manitou Zettlemeyer

Product number Bracket Mass (kg)

980/B0380 Q-Fit 53.4
980/B0685 Pin & Cone 70.6
980/B0686 Industrial 57.3
980/B0687 Euro 28.7
980/B0688 Compact Tool Carrier 35.3
980/B0689 Tool Carrier 47.8
980/B0703 Manitou 43.7
980/B0707 Zettelmeyer 53.6
980/B0708 HD Q-Fit 101
980/B0709 HD Pin & Cone 82.7
980/B0710 HD Industrial 106

6
 TELESCOPIC
HANDLER
RANGE
TELESCOPIC HANDLER
RANGE
Grain Shovels ...................................................................................................... 10-12

General Purpose Shovels .......................................................................................... 13

6-in-1 Shovel ............................................................................................................ 14

Bucket Brush ............................................................................................................ 15

Multi Shovels ....................................................................................................... 16-17

Power Grab ......................................................................................................... 18-19

Muck Forks with Top Grab ...................................................................................... 20

Forks ................................................................................................................... 21-24

Bale Handling ..................................................................................................... 25-28

Grain Pusher ........................................................................................................... 29

Shear Grab .............................................................................................................. 30

ATTACHMENTS
ATTACHMENTS
TELESCOPIC HANDLER RANGE
JCB’s Loadall range is one of the most extensive in the world, offering a variety of 21
models and 100s of attachments to help improve your productivity.
Our attachments are designed with valuable input from customers all over the world,
so you can rest assured that whichever one you choose, it will meet your needs right
down to the finest details.

9
Grain Shovels
JCB Attachments are pleased to announce the launch of the new generation of
JCB Grain Shovels. The grain shovel re-design is based on market feedback, with the
key focus on strength and durability. All grain shovels have the option of adding a
versatility-boosting bucket brush.
The new attachment design offers the following benefits:

• Improved geometry enabling greater tear-out

force, with increased material retention

Improved bracket
mounting Stronger reinforced floor –
Ultra-high ultra-high strength 5mm
strength 5mm steel formed floor
side panels

Larger stress
reduction in
Larger wear critical areas
pads

8mm steel stiffener to stop flexing Larger wear pads

10
 TELESCOPIC HANDLER

Grain Shovels
Part Fitted with Carriage Width Struck Heaped Weight Minimum
number toeplate pick up (mm) capacity capacity (kg) machine
(m3) (m3) capacity (kg)
980/A9028 Bolt on Compact Tool Carrier 1850 0.8 0.92 361 1400
980/A9989 Weld on Compact Tool Carrier 1850 1.2 1.3 376 2000
980/A9029 Bolt on Compact Tool Carrier 2000 0.87 1.0 378 1500
980/A9991 Weld on Compact Tool Carrier 2000 1.3 1.5 393 2000
980/A9971 Weld on Compact Tool Carrier 2150 1.4 1.6 410 2000
980/A9994 Weld on Tool Carrier 2150 1.6 1.8 442 2250
980/B0133 Bolt on Tool Carrier 2150 1.6 1.8 486 2250
980/A9997 Weld on Tool Carrier 2300 1.5 1.7 435 2250
980/A9929 Bolt on Tool Carrier 2300 1.5 1.7 482 2250
980/A9999 Weld on Tool Carrier 2300 1.7 2.0 461 2250
980/B0134 Bolt on Tool Carrier 2300 1.7 2.0 509 2500
980/A9953 Weld on Tool Carrier 2300 2.0 2.3 496 2750
980/A9927 Bolt on Tool Carrier 2300 2.0 2.3 543 2750
980/A9990 Weld on Pin & Cone 1850 1.2 1.4 380 2000
980/A9992 Weld on Pin & Cone 2000 1.3 1.5 397 2000
980/A9972 Weld on Pin & Cone 2300 1.5 1.7 432 2250
980/A9027 Bolt on Pin & Cone 2300 1.5 1.7 479 2250
980/A9954 Weld on Pin & Cone 2300 1.7 2.0 458 2250
980/A9995 Weld on Pin & Cone 2300 2.0 2.3 493 2750
980/A9926 Bolt on Pin & Cone 2300 2.0 2.3 540 3100
980/A9996 Weld on Pin & Cone 2300 2.3 2.7 552 3000
980/A9921 Bolt on Pin & Cone 2300 2.3 2.7 618 3000
980/A9974 Weld on Pin & Cone 2450 1.6 1.8 448 2250
980/B0103 Weld on Pin & Cone 2450 1.8 2.1 480 2500
980/A9930 Weld on Pin & Cone 2450 2.1 2.5 513 2750
980/A9928 Bolt on Pin & Cone 2450 2.1 2.5 564 2750
980/A9978 Weld on Pin & Cone 2450 2.5 2.9 574 3250
980/B0101 Bolt on Pin & Cone 2450 2.5 2.9 644 3250
980/A8956 Weld on Pin & Cone 2450 2.7 3.1 593 3250
980/A9923 Bolt on Pin & Cone 2450 2.7 3.1 664 3500
980/A8957 Weld on Pin & Cone 2450 3.0 3.4 627 3500
980/A8269 Bolt on Pin & Cone 2450 3.0 3.4 696 3500
980/B4948 Bolt on Pin & Cone 2450 3.6 4.1 964 4100
980/A9939 Weld on Manitou 2300 1.5 1.7 437 2250
980/A9958 Bolt on Manitou 2300 1.5 1.7 484 2250
980/A9940 Weld on Manitou 2300 2.0 2.3 500 2500
980/A9959 Bolt on Manitou 2300 2.0 2.3 547 2750
980/A9941 Weld on Manitou 2300 2.3 2.7 560 3000
980/A9960 Bolt on Manitou 2300 2.3 2.7 626 3000
980/B0102 Weld on Manitou 2450 2.5 2.9 582 3250
980/A9922 Bolt on Manitou 2450 2.5 2.9 652 3500
980/A9942 Weld on Manitou 2450 2.7 3.1 603 3250
980/A9961 Bolt on Manitou 2450 2.7 3.1 673 3500
980/A9943 Weld on Manitou 2450 3.0 3.4 637 3500
980/A9962 Bolt on Manitou 2450 3.0 3.4 707 3750

11
Grain Shovels
Part Fitted with Carriage Width Struck Heaped Weight Minimum
number toeplate pick up (mm) capacity capacity (kg) machine
(m3) (m3) capacity (kg)
980/A9946 Weld on Q-Fit 2000 1.3 1.5 399 2000
980/A8954 Weld on Q-Fit 2150 1.4 1.6 416 2000
980/A9993 Weld on Q-Fit 2150 1.6 1.8 441 2250
980/A9998 Bolt on Q-Fit 2300 0.95 1.24 425 1750
980/A9982 Weld on Q-Fit 2300 1.5 1.7 433 2250
980/A9931 Bolt on Q-Fit 2300 1.5 1.7 480 2250
980/A9983 Weld on Q-Fit 2300 1.7 2.0 460 2250
980/A9932 Bolt on Q-Fit 2300 1.7 2.0 508 2500
980/A9984 Weld on Q-Fit 2300 2.0 2.3 495 2750
980/A9933 Bolt on Q-Fit 2300 2.0 2.3 542 2750
980/A9985 Weld on Q-Fit 2300 2.3 2.7 564 3000
980/A9934 Bolt on Q-Fit 2300 2.3 2.7 630 3000
980/A9975 Weld on Q-Fit 2450 1.6 1.8 450 2250
980/A9935 Bolt on Q-Fit 2450 1.6 1.8 500 2250
980/B0104 Weld on Q-Fit 2450 1.8 2.1 479 2500
980/A9986 Weld on Q-Fit 2450 2.1 2.5 515 2750
980/A8045-- Weld on Q-Fit 2450 2.1 2.5 504 2750
980/A9936 Bolt on Q-Fit 2450 2.1 2.5 566 2750
980/A9950-- Weld on Q-Fit 2450 2.5 2.9 566 3000
980/A9973 Weld on Q-Fit 2450 2.5 2.9 586 3250
980/A9979+ Bolt on Q-Fit 2450 2.5 2.9 652 3250
980/A9937 Bolt on Q-Fit 2450 2.5 2.9 656 3250
980/A9951-- Weld on Q-Fit 2450 2.7 3.1 587 3250
980/A9987 Weld on Q-Fit 2450 2.7 3.1 607 3250
980/A9938 Bolt on Q-Fit 2450 2.7 3.1 677 3500
980/A9952-- Weld on Q-Fit 2450 3.0 3.4 620 3500
980/A9988 Weld on Q-Fit 2450 3.0 3.4 641 3500
980/A9980+ Bolt on Q-Fit 2450 3.0 3.4 707 3500
980/A9924 Bolt on Q-Fit 2450 3.0 3.4 711 3750
980/A9944 Weld on Q-Fit 2600 3.2 3.7 667 4000
980/A9925 Bolt on Q-Fit 2600 3.2 3.7 741 4100
980/A9981+ Bolt on Q-Fit 2450 3.56 4.4 983 4250
980/A9945+ Bolt on Q-Fit 2600 3.78 4.72 1025 4100
980/A9956+ Bolt on Q-Fit 2600 4.7 5.4 1118 5500
980/A9948+ Bolt on Q-Fit 2750 5.0 5.8 1165 5500
All machine compatibility calculated based on JCB machine stability and capacity figures.
+ Specified for 550/560-80 machines.
-- Specified for 535-95 machines with extra 10˚ dump.

12
 TELESCOPIC HANDLER

General Purpose Shovels

Our updated range of general purpose shovels are designed to tackle a wide
range of tasks. Manufactured using high quality steel, they are built to last even
through the toughest of applications.

• High quality steel design

• Drilled toeplates to allow bolt on toeplates
or teeth to be fitted
• Lightweight
• A range of sizes to suit all applications
• Designed for maximum durability
and productivity

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
322/W2065** Compact Tool Carrier 1620 0.48 270 1500
332/U5623 Compact Tool Carrier 1620 0.5 223 1500
335/06124 Compact Tool Carrier 1550 0.7 265 2000
980/A9967 Compact Tool Carrier 1850 0.8 314 2000
980/A9969 Compact Tool Carrier 2000 0.87 331 2000
514/00800 Compact Tool Carrier 2020 0.7 324 2400
331/12483 Compact Tool Carrier 2050 1.0 311 2400
980/82100 Tool Carrier 2110 0.9 320 2700
980/88130* Tool Carrier 2300 1.1 330 2600
334/D0628 Q-Fit 1950 0.9 373 2500
332/G2297 Q-Fit 2050 0.9 357 2700
547/37600* Q-Fit 2235 1.0 404 3100
980/A5063 Q-Fit 2286 1.0 390 2600
980/A7480** Q-Fit 2286 1.0 455 2600
980/B8000*** Q-Fit 2400 1.0 403 2500
980/B9000*** Q-Fit 2400 1.2 420 2500
335/E3117 Q-Fit 2438 1.0 405 2500
333/L7159* Q-Fit 2525 1.6 674 5500
400/M6684** Q-Fit 2548 1.6 790 4200
980/A8340 Pin & Cone 2286 1.0 402 2500
980/A8341** Pin & Cone 2286 1.0 468 2500
All machine compatibility based on JCB machine stability and capacity figures.
*Comes with spill guard. **Including Bolt On Toeplate. *** Optional Toeplate - 980/D0196.

13
6-in-1 Shovel
• Increases machine versatility: dozing, loading, digging, grabbing,
backfilling and grading, all possible from one unit

DOZING LOADING DIGGING

GRABBING GRADING BACKFILLING

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
512/04400 Skid steer 1550 0.3 348 1500
980/37200 Tool carrier 2235 0.7 750 2000
980/A2083 Q-Fit 2285 1.1 680 2500
All machine compatibility based on JCB machine stability and capacity figures.

14
 TELESCOPIC HANDLER

Bucket Brush
JCB Attachments are pleased to announce the addition of 4 new bucket brushes to
the existing range. Our bucket brushes now come in 5 sizes, from 1850mm (6ft) to
2450mm (8ft). The JCB Bucket Brush is a versatile tool, which can be used to sweep
a variety of materials such as mud, grain, slurry, aggregate and equine waste.

• With integrated motor valve protection as standard

• Weld on brackets included with the installation kit supplied with the bucket brush
• Poly brush segments to reduce risks to livestock

Part Width Weight Bucket size Max oil flow Pressures Minimum machine
number (mm) (kg) (m) (lpm) (bar) capacity (kg)
980/A9304 2005 184 1.85 100 250 2500
980/A9305 2155 193 2.00 100 250 2750
980/A9306 2305 202 2.15 100 250 2750
980/A9307 2455 211 2.30 100 250 3000
980/A9308 2605 220 2.45 100 250 3250

Bucket Brush Ready Shovels

Part Carriage Width Capacity Weight Minimum machine
number pick up (mm) (m3) (kg) capacity (kg)
980/B0360 Q-Fit 2300 1.5 635 2250
980/B0359 Pin & Cone 2300 1.5 641 2250
Bucket Brush Ready Shovels are pre welded ready for bucket brushes which are sold separately.

15
Multi Shovels
JCB Attachments offer a range of 32 multi shovels for Loadall and Telemaster
machines from 2500kg up to 3200kg, enabling greater customer choice.

• Forged tines and fabricated grab • Spill guard size has been increased whilst
• Reversible bolt on and weld on with maintaining excellent visibility, thanks to the
reliable Hardox 500 hb gaps within the JCB logo

• Q-fit, Pin and cone, Manitou, Tool carrier • The new design allows the multishovel to
be fully operational against walls, enabling
• Three different capacity sizes are offered in
the operator to efficiently handle all
the range - 1.45 m3, 1.59m3 and 1.66m3 -
material. The wide opening grab, coupled
The grab opens up to 1.75m, enabling
with excellent cylinder strength, allows
easy handling of silage, manure, timber,
for a very good grip of the material,
round and square bales
increasing productivity and safety on
• The strong hydraulic cylinder with end site. Moreover, the side profile design
dampening to reduce shock at the end of allows the material collection to be kept
the cycle - system fitted as standard to to its minimum
ensure refinement and durability
• A yellow level indicator has been added to
• A service hose storage and a fitted spiral facilitate the shovel positioning, letting you
wrap to protect hoses come as standard. do more in less time
The protecting cylinder hoses have
• The design structure is made of steel
also been re-phased for additional
S355 and is characterised by a Monobloc
hose protection
8mm shell, ensuring quality and strength

Forged Tine Fabricated Grab

16
 TELESCOPIC HANDLER

Multi Shovels - Forged Tine

Part Carriage Width Width Capacity Fitted with Weight Minimum machine
number pick up A (mm) B (mm) (m3) toe plate (kg) capacity (kg)
980/A2004 Tool Carrier 2150 1905 1.45 Weld-on 783 2500
980/A2012 Tool Carrier 2150 1905 1.45 Bolt-on 785 2500
980/A2005 Tool Carrier 2350 2105 1.59 Weld-on 832 2500
980/A2014 Tool Carrier 2350 2105 1.59 Bolt-on 831 2500
980/A1998 Q-Fit 2350 2105 1.59 Weld-on 830 2500
980/A2006 Q-Fit 2350 2105 1.59 Bolt-on 829 2500
980/A1999 Q-Fit 2450 2205 1.66 Weld-on 849 3200
980/A2007 Q-Fit 2450 2205 1.66 Bolt-on 847 3200
980/A2000 Pin & Cone 2150 1905 1.45 Weld-on 804 2500
980/A2008 Pin & Cone 2150 1905 1.45 Bolt-on 806 2500
980/A2001 Pin & Cone 2450 2205 1.66 Weld-on 872 3200
980/A2009 Pin & Cone 2450 2205 1.66 Bolt-on 870 3200
980/A2002 Manitou 2350 2105 1.59 Weld-on 855 2500
980/A2010 Manitou 2350 2105 1.59 Bolt-on 854 2500
980/A2003 Manitou 2450 2205 1.66 Weld-on 874 3200
980/A2011 Manitou 2450 2205 1.66 Bolt-on 872 3200
Forged Tine Multishovels have an opening width of 1760mm.

Multi Shovels - Fabricated Grab

Part Carriage Width Width Capacity Fitted with Weight Minimum machine
number pick up A (mm) B (mm) (m3) toe plate (kg) capacity (kg)
980/A1988 Tool Carrier 2150 1965 1.45 Weld-on 778 2500
980/A1996 Tool Carrier 2150 1965 1.45 Bolt-on 775 2500
980/A1989 Tool Carrier 2350 2165 1.59 Weld-on 830 2500
980/A1997 Tool Carrier 2350 2165 1.59 Bolt-on 827 2500
980/A1980 Q-Fit 2350 2165 1.59 Weld-on 828 2500
980/A1990 Q-Fit 2350 2165 1.59 Bolt-on 825 2500
980/A1981 Q-Fit 2450 2265 1.66 Weld-on 847 3200
980/A1991 Q-Fit 2450 2265 1.66 Bolt-on 843 3200
980/A1982 Pin & Cone 2150 1965 1.45 Weld-on 799 2500
980/A1992 Pin & Cone 2150 1965 1.45 Bolt-on 796 2500
980/A1984 Pin & Cone 2450 2265 1.66 Weld-on 870 3200
980/A1993 Pin & Cone 2450 2265 1.66 Bolt-on 866 3200
980/A1986 Manitou 2350 2165 1.59 Weld-on 853 2500
980/A1994 Manitou 2350 2165 1.59 Bolt-on 850 2500
980/A1987 Manitou 2450 2265 1.66 Weld-on 872 3200
980/A1995 Manitou 2450 2265 1.66 Bolt-on 868 3200
Fabricated Tine Multishovels have an opening width of 1750mm.

17
Power Grabs
Our power grabs have been redesigned to further enhance the capabilities of your
machine and ensure it is working to its maximum performance and efficiency. All grabs
are provided with suitable tail hoses and quick release couplings, making sure when it
arrives, it is ready to go straight to work.

• Wide range of tine options using forged • Larger electroplated pivot pins, which can
and Hardox variations to suit all be greased and strategically placed wear
applications, featuring improved bosses strips to prolong life, help dissipate stress
on the forged tines on the top grab, to and reduce the cost of ownership
maximise strength • Improved spill guard design, to protect
• Larger opening top grab with a greater the hitch on the machine
clamping force, to handle bigger and • Greater visibility of the end tines from the
bulkier loads. With improved geometry, cab, to ensure precise material handling
enabling it to work up to a wall and robot and maximum ram protection
welded folded steel, to add superior
strength and rigidity throughout
• Hoses are clamped neatly out of the way
of debris, to reduce the chance of damage

18
 TELESCOPIC HANDLER

Power Grabs
Part Carriage Tines Width Capacity Weight Tine Number Tine Minimum
number pick up (mm) (m3) (kg) length of tines spacing machine
(mm) (mm) capacity (kg)
980/B0003 Compact Tool Carrier KV-KV 1850 0.9 314 810 8 211 1500
980/B0005 Compact Tool Carrier KV-KV 2010 1.0 323 810 9 230 1500
980/B0040 Tool Carrier KV-KV 1980 1.5 543 980 8 259 2500
980/B0002 Tool Carrier KV-KV 2150 1.6 557 980 8 280 2500
980/B0019 Tool Carrier KV-KV 2300 1.7 579 980 9 265 2500
980/B0020 Tool Carrier H-KV 2300 1.7 766 980 9 265 3000
980/B0021 Tool Carrier H-H 2300 1.7 776 980 9 265 3000
980/B0034 Q-Fit KV-KV 1980 1.5 545 980 8 259 2500
980/B0100 Q-Fit H-H 2025 1.5 734 980 8 259 2750
980/B0001 Q-Fit KV-KV 2150 1.6 559 980 8 280 2500
980/B0099 Q-Fit H-H 2175 1.6 748 980 8 280 2750
980/B0013 Q-Fit KV-KV 2300 1.7 581 980 9 265 2500
980/B0014 Q-Fit H-KV 2300 1.7 768 980 9 265 3000
980/B0015 Q-Fit H-H 2300 1.7 778 980 9 265 3000
980/B0016 Q-Fit KV-KV 2300 2.3 637 1100 9 265 3000
980/B0017 Q-Fit H-KV 2300 2.3 724 1100 9 265 3500
980/B0018 Q-Fit H-H 2300 2.3 743 1100 9 265 3500
980/B0022 Q-Fit KV-KV 2450 1.8 603 980 10 252 3000
980/B0023 Q-Fit H-H 2450 1.8 808 980 10 252 3000
980/B0024 Q-Fit KV-KV 2450 2.4 660 1100 10 252 3500
980/B0025 Q-Fit H-H 2450 2.4 776 1100 10 252 3500
980/C0112 Q-Fit H-H 2625 2.6 743 1100 10 268 3500
980/B0004 Pin & Cone KV-KV 1850 0.9 316 810 8 211 1500
980/B0035 Pin & Cone KV-KV 1980 1.5 545 980 8 259 2500
980/B0006 Pin & Cone KV-KV 2010 1.0 325 810 9 230 1500
980/B0041 Pin & Cone KV-KV 2025 1.5 545 980 8 259 2500
980/B0007 Pin & Cone KV-KV 2300 1.7 581 980 9 265 2500
980/B0008 Pin & Cone H-KV 2300 1.7 768 980 9 265 3000
980/B0009 Pin & Cone H-H 2300 1.7 778 980 9 265 3000
980/B0010 Pin & Cone KV-KV 2300 2.3 638 1100 9 265 3000
980/B0011 Pin & Cone H-KV 2300 2.3 727 1100 9 265 3500
980/B0012 Pin & Cone H-H 2300 2.3 746 1100 9 265 3500
980/B0026 Pin & Cone KV-KV 2450 1.8 603 980 10 252 3000
980/B0027 Pin & Cone H-H 2450 1.8 808 980 10 252 3000
980/B4949 Pin & Cone H-H 2475 2.4 773 1100 10 252 3500
980/B0039 Manitou H-H 2290 1.7 782 980 9 265 3000
980/B0032 Manitou KV-KV 2300 1.7 585 980 9 265 2500
980/B0033 Manitou KV-KV 2300 2.3 644 1100 9 265 3000
980/B0050 Manitou H-KV 2325 1.7 772 980 9 265 3000
Tines: KV - Kverneland tines H - Hardox tines H-KV Hardox lower - KV upper.

19
Muck Forks with Top Grab
• A versatile attachment for moving manure,
muck, silage and bales
• A proven design, working hard, day in,
day out, year on year, highly valued by
owners and operators
• Heavy-duty construction and powerful rams, ensure
that even the most compacted manure can be efficiently shifted

Part Carriage Tines Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
980/B0057 Pin & Cone S 2284 1.8 582 2600
980/B0060 Pin & Cone F 2284 1.8 560 2600
980/B0059 Pin & Cone H 2284 1.8 600 2600
Tines: F - Forged tines H - Hardox tines S- Standard tines.

20
 TELESCOPIC HANDLER

Fork Positioners
• Our fork positioners allow the width of the forks
to be easily adjusted, to fit any sized pallet or bag
• Fork retaining holders allow the forks to be
easily folded and made safe for transport
• High capacity rating, allowing you to do
any job you need them to do
• Compact design, to allow good visibility
in front of the forks
• Plated end caps on both ends, to improve access when servicing

Part Carriage Fork pin diameter Max fork width Minimum machine
number pick up (mm) (mm) capacity (kg)
980/A2051 Q-Fit 50.7 100 2500
980/A2053 Q-Fit 57 100 2500
Forks to be ordered separately.

Industrial Sideshift
• Allows ±100mm sideshift of load, for accurate placement
• Fitted between industrial fork frame and forks, or other FEM/ITA compatible attachments
Requires industrial fork frame of correct class. Uses the same forks as the industrial
fork frame. Does not include hoses or quick connector.

Part Class Operating width Minimum machine

number (mm) capacity (kg)
515/20034 2 1100 1500
332/U5615 3 1200 4000

21
Integral Sideshift
• Allows fork positioning, ready for load pick-up and sideshift of load when placing,
especially useful when working at height
• Fits on clearview carriages
For 535-125 to 540-200, requires Q-Fit clearview carriage
(standard on 540-170 and 540-200).

Part Item Fork length Fork width Fork thickness Minimum machine
number (mm) (mm) (mm) capacity (kg)
160/13008+ - - - - 3500
160/13011 Forks for above* 1200 80 50 3500
+Requires special forks. *Includes special pin.

Fork Frames with Floating Forks

• Floating forks aid pick-up of loads on uneven
ground, by allowing fork tines to ride up and
down as they enter the load
• Forks locked in position on fork bar
by ‘T’ handles

Part Item Carriage Operating Fork pin Fork Fork Fork Minimum
number pick up width diameter length width thickness machine
(mm) (mm) (mm) (mm) (mm) capacity (kg)
296/02244 Fork frame and forks Compact Tool Carrier 1015 44.4 1067 80 40 1500
331/44702 Forks for above - - 44.4 1067 80 40 1500
296/12034 Fork frame and forks Compact Tool Carrier 1270 50.7 1067 100 45 2400
296/12045 Fork frame and forks Compact Tool Carrier 1270 50.7 1200 125 40 2400
514/02400 Forks for above - - 50.7 1067 100 45 2400
514/02200 Forks for above - - 50.7 1200 125 40 2400
514/02000 Forks for above - - 44.4 1067 80 40 2700
545/47096 Fork frame and pin Tool Carrier 1212 50.7 - - - 2600
545/82118 Forks for above - - 50.7 1067 100 40 2600
545/82119 Forks for above - - 50.7 1200 100 40 2600
401/H7915 Frame - no forks (514/02400) Tool Carrier 1343 51 1067 100 45 3200
980/89727 Fork frame and forks Skid Steer 1200 50.7 1200 100 50 1500
332/E9877 Fork frame and forks Skid Steer 1200 50.7 1200 100 50 2000
400/T0101 Frame and forks Manitou 1811 57 1067 100 50 3500
401/M6455 Frame and forks Manitou 1811 57 1200 100 50 3300
Allows ±100mm sideshift of load for accurate placement. Fitted between industrial fork frame
and forks or other FEM/ITA compatible attachments. *WA only. Requires dataplate, fork pin etc.

22
 TELESCOPIC HANDLER

Forks Frames/Industrial Forks

• Compatible with many industrial forklift attachments made to FEM/ITA standards
• Plunger locks engage frame castellations, keeping adjustable forks securely placed

Part Item Carriage Type Operating Fork Fork Fork Minimum machine
number pick up width length width thickness capacity (kg)
(mm) (mm) (mm) (mm)
980/89726 Fork frame and forks Skid Steer Class 2 1200 1100 100 - 1500
332/E9885 Fork frame and forks Skid Steer Class 2 1200 1100 100 - 2000
514/00700 Fork frame only Compact Tool Carrier Class 2 1100 - - - 1500
333/C6894 Forks for above - Class 2 - 1070 100 45 1500
333/T0061 Forks for above - Class 2 - 1200 100 45 1500
514/01500 Fork frame only Compact Tool Carrier Class 3 1317 - - - 2400
333/T0068 Forks for above - Class 3 - 1067 100 50 2400
333/T0070 Forks for above - Class 3 - 1200 125 50 2400
545/47017 Fork frame only Tool Carrier Class 2 1370 - - - 2600
333/C6894 Forks for above - Class 2 - 1070 100 45 2600
333/T0061 Forks for above - Class 2 - 1200 100 45 2600
545/40000 Fork frame only Q-Fit Class 2 1370 - - - 2600
545/40200 Fork frame only Q-Fit Class 2 1980 - - - 2600
545/40800 Fork frame only Q-Fit Class 3 1500 - - - 3200
333/T0068 Forks for above - Class 3 - 1067 100 50 3200
333/T0070 Forks for above - Class 3 - 1200 125 50 3200
980/C5025 Fork frame with side plates Manitou Class 3 1170 1100 100 50 2700
333/C6944 Forks for above - Class 3 - 1100 100 50 2700
511/60800 Forks for above - Class 3 - 1220 120 50 5000
333/R1669 Frame and forks Euro Industrial 1345 1200 100 40 1800
333/U1371 Frame and forks Euro Industrial 1345 1067 100 40 1800

23
Carriage Mounted Forks
• No payload reduction, due to additional weight of fork frame
• Forks easily and quickly removed, for fitment of other attachments

Part Carriage Type Fork Fork Fork Fork Combined Minimum machine
number pick up pin dia length width thickness fork SWL capacity (kg)
(mm) (mm) (mm) (mm) (kg)
545/82121 Q-Fit Floating 50.7 1067 100 40 3100 2600
545/82126 Q-Fit Floating 50.7 1200 125 40 3700 2600
545/82136 Q-Fit Floating 50.7 1200 100 45 3700 3500
545/82139 Q-Fit Floating 50.7 1067 100 50 3700 3500
545/82134 Q-Fit Floating 50.7 1067 100 45 3700 3500
400/W9250 Q-Fit Floating 50.7 1067 103 45 3800 3200
400/W9252 Q-Fit Floating 50.7 1165 103 45 3800 3200
545/82141 Q-Fit Floating 50.7 1200 100 50 3700 3500
400/W9257 Q-Fit Floating 57 1067 100 50 4200 3300
545/82130 Q-Fit Floating 57 1067 100 50 4100 3600
400/W9259 Q-Fit Floating 57 1200 100 50 4200 3300
545/82132 Q-Fit Floating 57 1200 100 50 4100 3600
545/82129 Q-Fit Floating 57 1200 120 50 5532 3600
333/D9783 Q-Fit Floating 57 1067 100 50 4100 4000
333/F1354 Q-Fit Floating 57 1200 120 50 4610 4000
333/E3476 Q-Fit Floating 57 1067 120 50 5532 5000
333/E3433 Q-Fit Floating 57 1200 130 60 7200 5000
333/E2967 Q-Fit Floating 57 1200 120 50 5532 5000
Bars to be ordered separately
811/30088 - Fork pin dia. 50.7mm, length 1330mm
811/30070 - Fork pin dia. 57mm, length 1365mm

24
 TELESCOPIC HANDLER

Bale Handling
If you need to move bales around on a farm site, then the JCB Bale Handling
Attachments are invaluable tools. For total versatility, we offer 6 different bale
handling attachments, to suit your every need, on a variety of machines.

• Options available for a range of pickups and machines

• Bolt on bracket options for universal use

25
Single Bale Spikes
• For efficient handling of round bales
up to 1800mm diameter
• The lower tine prevents rotation
of the bale

Part Carriage Width Weight Usable tine Minimum machine

number pick up (mm) (kg) length (mm) capacity (kg)
980/36300 Tool Carrier 550 84 980 2600
980/25200 Q-Fit 1070 120 980 2600
980/88011 Pin & Cone 1220 80 980 1800

Twin Bale Spike

• Offers safe and effective handling of
two round bales up to 1800m diameter
• Or single, rectangular bales up to
1200mm x 1200mm x 2500mm

Part Carriage Width Weight Usable tine Minimum machine

number pick up (mm) (kg) length (mm) capacity (kg)
980/36200 Tool Carrier 1920 136 980 2600

Twin or Single Bale Spike

• Removable tines, so that it can be
used as a single or twin bale spike
• Sold as a universal hanger with
optional bolt on brackets* (to be
ordered separately)
• Bolt on tines for safe transportation
and replacement, if worn or damaged

Part Carriage Width Weight Upper tine Lower tine Usable tine Height Minimum
number pick up (mm) (kg) length length length (mm) (mm) machine
(mm) (mm) capacity (kg)
980/A7819 No brackets* 1520 87 1250 810 987 415 3500
*Bolt on brackets available.

26
 TELESCOPIC HANDLER

High Back Bale Spike

• Sold as a universal hanger with
optional bolt on brackets*
(to be ordered separately)
• Designed to carry 3 Quadrant
bales or 2 Heston bales
• Bolt on tines for safe transportation
and replacement, if worn or damaged
• Tines are forged 40mm square

Part Carriage Width Weight Height fully Height not Usable tine Minimum
number pick up (mm) (kg) extended extended length (mm) machine
(mm) (mm) capacity (kg)
980/A7820 Universal* 1660 127 1925 1304 958 2500
*Bolt on brackets available.

Clap Hands Bale Grab

• No sharp edges, for handling wrapped
or unwrapped bales
• Double acting ram with check valve,
for maximum safety
• Ability to lock out one side, to aid stacking
• Can handle round or square bales

Part Carriage Capacity Width Weight Frame Paddle Frame Frame Overall Open Closed Minimum
number pick up (mm) (kg) height height depth width depth Centres Centres machine
(mm) (mm) (mm) (mm) (mm) (mm) (mm) capacity (kg)
980/B0723 Universal Single Bale 1384 177 435 700 323 1384 1368 1815 360 1500

27
Wrapped Bale Handler UPDATE
JCB Attachments are pleased to announce an update to our universal
wrapped bale handler. The operator now benefits from better visibility,
as well as a more modern tube design, for added strength.

• Better visibility through the attachment

for the operator
• Removable sleeves for versatility,
able to use as a wrapped bale
handler or bale spike
• A more modern tube design
for added strength

Part Carriage Width Height Depth Open Closed Weight Tube Usable Minimum
number pick up (mm) (mm) (mm) centres centres (kg) length tine length machine
(mm) (mm) (mm) (mm) capacity (kg)
980/B0724 Universal 1687 701 1489 1575 800 183 1183 988 1500

With a universal pick up, the bale handler works most productively
when used with JCB bolt on brackets.

Product number Bracket Mass (kg)

980/B0380 Q-Fit 53.4
980/B0685 Pin & Cone 70.6
980/B0688 Compact Tool Carrier 35.3
980/B0689 Tool Carrier 47.8
980/B0703 Manitou 43.7
980/B0708 HD Q-Fit 101
980/B0709 HD Pin & Cone 82.7

28
 TELESCOPIC HANDLER

Grain Pusher
Designed to make optimum use of your grain store capacity. It has a 2286mm (90in)
blade and a tubular frame, for ultimate strength and minimum weight.

• This attachment is especially useful when operating over above-floor drying ducts
• Because there are no flat edges, your grain can fall freely
• A tubular frame using high-tensile steel, maximises strength and minimises weight
• Designed for ultimate performance, reliability and productivity, the JCB Grain Pusher
is the only approved attachment of its type for JCB machines

Part Carriage Width Size Weight Minimum machine

number pick up (mm) (Ft in) (kg) capacity (kg)
980/A9910 Q-Fit 2438 10 Ft 440 3100
980/A9912 Q-Fit 2433 12 Ft 6in 480 3100

29
Shear Grab UPDATE
The JCB Shear Grab features Hardox tines, a heavily reinforced construction
and a powerful action, ensuring that you can cut grass and maize silage cleanly
from the clamp, all day long.

• Enclosed front and sides • Improved pivot point

• Smooth clamp face cut • NEW side panels of 10mm
• Heavy-duty design Domex 420 MCD

• Suitable for loaders and telehandlers • 35mm Hardox tines

• Individual serrated blades

Part Carriage Tines Width Opening height Capacity Weight Minimum machine
number pick up (mm) (mm) (m3) (kg) capacity (kg)
980/B0725 Universal Welded 1300 800 0.92 540 1600
980/B0717 Universal Welded 1500 800 1.06 583 1800
980/B0718 Universal Welded 1800 800 1.28 673 2000
980/B0719 Universal Welded 2200 800 1.56 776 2200
980/B0720* Universal Welded 2200 1013 2.00 1093 2800
980/B0721* Universal Welded 2500 1013 2.20 1190 3000
*Compatible with heavy-duty, bolt on brackets only.

Above, are all universal pick up with weld

on tines, designed to be used alongside
our bolt on brackets.

Product number Bracket Mass (kg)

980/B0380 Q-Fit 53.4
980/B0685 Pin & Cone 70.6
980/B0688 Compact Tool Carrier 35.3
980/B0689 Tool Carrier 47.8
980/B0703 Manitou 43.7
980/B0708 HD Q-Fit* 101
980/B0709 HD Pin & Cone* 82.7

30
 TELEMASTER
RANGE

TELEMASTER
RANGE
Grain Shovels ..................................................................................................... 34-36

General Purpose Shovels ......................................................................................... 37

6-in-1 Shovel ........................................................................................................... 38

Bucket Brush ........................................................................................................... 39

Multi Shovels ...................................................................................................... 40-41

Power Grab ........................................................................................................ 42-43

Muck Forks with Top Grab ...................................................................................... 44

Industrial Sideshift .................................................................................................... 45

Forks ....................................................................................................................... 46

Bale Handling ..................................................................................................... 47-50

Grain Pusher ............................................................................................................ 51

Shear Grab .............................................................................................................. 52

ATTACHMENTS
ATTACHMENTS
TELEMASTER RANGE
JCB’s TeleMaster machines are designed to be powerful and productive, with
articulated steering, permanent 4-wheel drive, superb loading and telescopic reach.
Combined with a range of attachments, from Grain Shovels to Power Grabs,
your JCB TeleMaster provides supreme versatility in space-restricted areas, for
a number of applications.

33
Grain Shovels
JCB Attachments are pleased to announce the launch of the new generation of
JCB Grain Shovels. The grain shovel re-design is based on market feedback, with the
key focus on strength and durability. All grain shovels have the option of adding a
versatility-boosting bucket brush.
The new attachment design offers the following benefits:

• Improved geometry enabling greater tear-out

force, with increased material retention

Improved bracket
mounting Stronger reinforced floor –
Ultra-high ultra-high strength 5mm
strength 5mm steel formed floor
side panels

Larger stress
reduction in
Larger wear critical areas
pads

8mm steel stiffener to stop flexing Larger wear pads

34
 TELEMASTER

Grain Shovels
Part Fitted with Carriage Width Struck Heaped Weight Minimum
number toeplate pick up (mm) capacity capacity (kg) machine
(m3) (m3) capacity (kg)
980/A9990 Weld on Pin & Cone 1850 1.2 1.4 380 2000
980/A9992 Weld on Pin & Cone 2000 1.3 1.5 397 2000
980/A9972 Weld on Pin & Cone 2300 1.5 1.7 432 2250
980/A9954 Weld on Pin & Cone 2300 1.7 2.0 458 2250
980/A9995 Weld on Pin & Cone 2300 2.0 2.3 493 2750
980/A9926 Bolt on Pin & Cone 2300 2.0 2.3 540 3100
980/A9996 Weld on Pin & Cone 2300 2.3 2.7 552 3000
980/A9921 Bolt on Pin & Cone 2300 2.3 2.7 618 3000
980/A9974 Weld on Pin & Cone 2450 1.6 1.8 448 2250
980/B0103 Weld on Pin & Cone 2450 1.8 2.1 480 2500
980/A9930 Weld on Pin & Cone 2450 2.1 2.5 513 2750
980/A9978 Weld on Pin & Cone 2450 2.5 2.9 574 3250
980/A8956 Weld on Pin & Cone 2450 2.7 3.1 593 3250
980/A9923 Bolt on Pin & Cone 2450 2.7 3.1 664 3500
980/A8269 Bolt on Pin & Cone 2450 3.0 3.4 696 3500
980/B4948 Bolt on Pin & Cone 2450 3.6 4.1 964 4100
980/A9946 Weld on Q-Fit 2000 1.3 1.5 399 2000
980/A9993 Weld on Q-Fit 2150 1.6 1.8 441 2250
980/A9982 Weld on Q-Fit 2300 1.5 1.7 433 2250
980/A9931 Bolt on Q-Fit 2300 1.5 1.7 480 2250
980/A9983 Weld on Q-Fit 2300 1.7 2.0 460 2250
980/A9932 Bolt on Q-Fit 2300 1.7 2.0 508 2500
980/A9984 Weld on Q-Fit 2300 2.0 2.3 495 2750
980/A9933 Bolt on Q-Fit 2300 2.0 2.3 542 2750
980/A9985 Weld on Q-Fit 2300 2.3 2.7 564 3000
980/A9934 Bolt on Q-Fit 2300 2.3 2.7 630 3000
980/A9975 Weld on Q-Fit 2450 1.6 1.8 450 2250
980/A9935 Bolt on Q-Fit 2450 1.6 1.8 500 2250
980/A9986 Weld on Q-Fit 2450 2.1 2.5 515 2750
980/A9936 Bolt on Q-Fit 2450 2.1 2.5 566 2750
980/A9973 Weld on Q-Fit 2450 2.5 2.9 586 3250
980/A9937 Bolt on Q-Fit 2450 2.5 2.9 656 3250
980/A9987 Weld on Q-Fit 2450 2.7 3.1 607 3250
980/A9938 Bolt on Q-Fit 2450 2.7 3.1 677 3500
980/A9988 Weld on Q-Fit 2450 3.0 3.4 641 3500
980/A9924 Bolt on Q-Fit 2450 3.0 3.4 711 3750
980/A9944 Weld on Q-Fit 2600 3.2 3.7 667 4000
980/A9925 Bolt on Q-Fit 2600 3.2 3.7 741 4100
All machine compatibility calculated based on JCB machine stability and capacity figures.

35
36
 TELEMASTER

General Purpose Shovels

Our updated range of general purpose shovels are designed to tackle a wide
range of tasks. Manufactured using high quality steel, they are built to last even
through the toughest of applications.

• High quality steel design

• Drilled toeplates to allow bolt on toeplates
or teeth to be fitted
• Lightweight
• A range of sizes to suit all applications
• Designed for maximum durability
and productivity

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
334/D0628 Q-Fit 1950 0.9 373 2500
980/A9965 Q-Fit 2000 0.8 283 1800
980/A7480** Q-Fit 2286 1.0 455 2600
980/B8000*** Q-Fit 2400 1.0 403 2500
980/B9000*** Q-Fit 2400 1.2 420 2500
335/E3117 Q-Fit 2438 1.0 405 2500
333/L7159* Q-Fit 2525 1.6 674 5500
980/A9968 Pin & Cone 1850 0.8 320 1800
980/A9970 Pin & Cone 2000 0.87 337 2200
400/M6870** Pin & Cone 2548 1.6 790 4200
980/C0035 Pin & Cone 2550 1.6 674 4200
All machine compatibility based on JCB machine stability and capacity figures.
*Comes with spill guard. **Including Bolt On Toeplate. *** Optional Toeplate - 980/D0196.

37
6-in-1 Shovel
• Increases machine versatility: dozing, loading, digging, grabbing,
backfilling and grading, all possible from one unit

DOZING LOADING DIGGING

GRABBING GRADING BACKFILLING

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
980/37200 Tool carrier 2235 0.7 750 2000
980/A2083 Q-Fit 2285 1.1 680 2500
All machine compatibility based on JCB machine stability and capacity figures.

38
 TELEMASTER

Bucket Brush
JCB Attachments are pleased to announce the addition of 4 new bucket brushes to
the existing range. Our bucket brushes now come in 5 sizes, from 1850mm (6ft) to
2450mm (8ft). The JCB Bucket Brush is a versatile tool, which can be used to sweep
a variety of materials such as mud, grain, slurry, aggregate and equine waste.

• With integrated motor valve protection as standard

• Weld on brackets included with the installation kit supplied with the bucket brush
• Poly brush segments, to reduce risks to livestock

Part Width Weight Bucket size Max oil flow Pressures Minimum machine
number (mm) (kg) (m) (lpm) (bar) capacity (kg)
980/A9304 2005 184 1.85 100 250 2500
980/A9305 2155 193 2.00 100 250 2750
980/A9306 2305 202 2.15 100 250 2750
980/A9307 2455 211 2.30 100 250 3000
980/A9308 2605 220 2.45 100 250 3250

Bucket Brush Ready Shovels

Part Carriage Width Capacity Weight Minimum machine
number pick up (mm) (m3) (kg) capacity (kg)
980/B0360 Q-Fit 2300 1.5 635 2250
980/B0359 Pin & Cone 2300 1.5 641 2250
Bucket Brush Ready Shovels are pre-welded, ready for bucket brushes which are sold separately.

39
Multi Shovels
JCB Attachments offer a range of 32 multi shovels for Loadall and Telemaster
machines, from 2500kg up to 3200kg, enabling greater customer choice.

• Forged tines and fabricated grab • Spill guard size has been increased whilst
• Reversible bolt on and weld on with maintaining excellent visibility, thanks to the
reliable Hardox 500 hb gaps within the JCB logo

• Q-fit, Pin and cone, Manitou, Tool carrier • The new design allows the multishovel to
be fully operational against walls, enabling
• Three different capacity sizes are offered in
the operator to efficiently handle all
the range - 1.45 m3, 1.59m3 and 1.66m3 -
material. The wide opening grab, coupled
The grab opens up to 1.75m, enabling
with excellent cylinder strength, allows
easy handling of silage, manure, timber,
for a very good grip of the material,
round and square bales
increasing productivity and safety on
• The strong hydraulic cylinder with end site. Moreover, the side profile design
dampening to reduce shock at the end of allows the material collection to be kept
the cycle - system fitted as standard to to its minimum
ensure refinement and durability
• A yellow level indicator has been added to
• A service hose storage and a fitted spiral facilitate the shovel positioning, letting you
wrap to protect hoses, come as standard. do more in less time
The protecting cylinder hoses have
• The design structure is made of steel
also been re-phased, for additional
S355 and is characterised by a Monobloc
hose protection
8mm shell, ensuring quality and strength

Forged Tine Fabricated Grab

40
 TELEMASTER

Multi Shovels - Forged Tine

Part Carriage Width Width Capacity Fitted with Weight Minimum machine
number pick up A (mm) B (mm) (m3) toe plate (kg) capacity (kg)
980/A1999 Q-Fit 2450 2205 1.66 Weld-on 849 3200
980/A2007 Q-Fit 2450 2205 1.66 Bolt-on 847 3200
980/A2001 Pin & Cone 2450 2205 1.66 Weld-on 872 3200
980/A2009 Pin & Cone 2450 2205 1.66 Bolt-on 870 3200
Forged Tine Multishovels have an opening width of 1760mm.

Multi Shovels - Fabricated Grab

Part Carriage Width Width Capacity Fitted with Weight Minimum machine
number pick up A (mm) B (mm) (m3) toe plate (kg) capacity (kg)
980/A1981 Q-Fit 2450 2265 1.66 Weld-on 847 3200
980/A1991 Q-Fit 2450 2265 1.66 Bolt-on 843 3200
980/A1984 Pin & Cone 2450 2265 1.66 Weld-on 870 3200
980/A1993 Pin & Cone 2450 2265 1.66 Bolt-on 866 3200
Fabricated Tine Multishovels have an opening width of 1750mm.

41
Power Grabs
Our power grabs have been redesigned to further enhance the capabilities of your
machine and ensure it is working to its maximum performance and efficiency. All grabs
are provided with suitable tail hoses and quick release couplings, making sure when it
arrives, it is ready to go straight to work.

• Wide range of tine options, using forged • Larger electroplated pivot pins, which can
and Hardox variations to suit all be greased and strategically placed wear
applications, featuring improved bosses strips to prolong life, help dissipate stress
on the forged tines on the top grab, to and reduce the cost of ownership
maximise strength • Improved spill guard design to protect
• Larger opening top grab with a greater the hitch on the machine
clamping force to handle bigger and • Greater visibility of the end tines from the
bulkier loads. With improved geometry, cab, to ensure precise material handling
enabling it to work up to a wall and robot and maximum ram protection
welded folded steel, to add superior
strength and rigidity throughout
• Hoses are clamped neatly out of the way
of debris, to reduce the chance of damage

42
 TELEMASTER

Power Grabs
Part Carriage Tines Width Capacity Weight Tine Number Tine Minimum
number pick up (mm) (m3) (kg) length of tines spacing machine
(mm) (mm) capacity (kg)
980/B0013 Q-Fit KV-KV 2300 1.7 581 980 9 265 2500
980/B0014 Q-Fit H-KV 2300 1.7 768 980 9 265 3000
980/B0015 Q-Fit H-H 2300 1.7 778 980 9 265 3000
980/B0016 Q-Fit KV-KV 2300 2.3 637 1100 9 265 3000
980/B0017 Q-Fit H-KV 2300 2.3 724 1100 9 265 3500
980/B0018 Q-Fit H-H 2300 2.3 743 1100 9 265 3500
980/B0022 Q-Fit KV-KV 2450 1.8 603 980 10 252 3000
980/B0023 Q-Fit H-H 2450 1.8 808 980 10 252 3000
980/B0024 Q-Fit KV-KV 2450 2.4 660 1100 10 252 3500
980/B0025 Q-Fit H-H 2450 2.4 776 1100 10 252 3500
980/B0004 Pin & Cone KV-KV 1850 0.9 316 810 8 211 1500
980/B0007 Pin & Cone KV-KV 2300 1.7 581 980 9 265 2500
980/B0012 Pin & Cone H-H 2300 2.3 746 1100 9 265 3500
980/B0026 Pin & Cone KV-KV 2450 1.8 603 980 10 252 3000
980/B4949 Pin & Cone H-H 2475 2.4 773 1100 10 252 3500
Tines: KV - Kverneland tines H - Hardox tines H-KV Hardox lower - KV upper.

43
Muck Forks with Top Grab
• A versatile attachment for moving manure,
muck, silage and bales
• A proven design, working hard, day in,
day out, year on year, highly valued by
owners and operators
• Heavy-duty construction and powerful rams, ensure
that even the most compacted manure can be efficiently shifted

Part Carriage Tines Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
980/B0057 Pin & Cone S 2284 1.8 582 2600
980/B0060 Pin & Cone F 2284 1.8 560 2600
980/B0059 Pin & Cone H 2284 1.8 600 2600
Tines: F - Forged tines H - Hardox tines S- Standard tines.

44
 TELEMASTER

Industrial Sideshift
• Allows ±100mm sideshift of load for accurate placement
• Fitted between industrial fork frame and forks, or other FEM/ITA compatible attachments
Requires industrial fork frame of correct class. Uses the same forks as the industrial
fork frame. Does not include hoses or quick connector.

Part Class Operating width Minimum machine

number (mm) capacity (kg)
515/20034 2 1100 1500
332/U5615 3 1200 4000

Integral Sideshift
• Allows fork positioning, ready for load pick-up and sideshift of load when placing,
especially useful when working at height
• Fits on clearview carriages
For 535-125 to 540-200, requires Q-Fit clearview carriage
(standard on 540-170 and 540-200).

Part Item Fork length Fork width Fork thickness Minimum machine
number (mm) (mm) (mm) capacity (kg)
160/13008+ - - - - 3500
160/13011 Forks for above* 1200 80 50 3500
+Requires special forks. *Includes special pin.

45
Forks Frames/Industrial Forks
• Compatible with many industrial forklift attachments made to FEM/ITA standards
• Plunger locks engage frame castellations, keeping adjustable forks securely placed

Part Item Carriage Type Operating Fork Fork Fork Minimum machine
number pick up width length width thickness capacity (kg)
(mm) (mm) (mm) (mm)
545/40800 Fork frame only Q-Fit Class 3 1500 - - - 3200
333/T0068 Forks for above - Class 3 - 1067 100 50 3200
333/T0070 Forks for above - Class 3 - 1200 125 50 3200
333/R6289 Fork frame only+ Pin & Cone Class 2 1345 - - - 1800
333/S9901 Forks for above - Class 2 - 1067 100 40 1800
333/T0057 Forks for above - Class 2 - 1200 100 40 1800
335/B0238 Fork frame only* Pin & Cone Class 3 - - - - 3200
333/T0068 Forks for above Pin & Cone Class 3 - 1067 100 45 3200
333/T0070 Forks for above Pin & Cone Class 3 - 1200 100 45 3200

Carriage Mounted Forks

• No payload reduction, due to additional weight of fork frame
• Forks easily and quickly removed, for fitment of other attachments

Part Carriage Type Fork Fork Fork Fork Combined Minimum machine
number pick up pin dia length width thickness fork SWL capacity (kg)
(mm) (mm) (mm) (mm) (kg)
545/82121 Q-Fit Floating 50.7 1067 100 40 3100 2600
545/82126 Q-Fit Floating 50.7 1200 125 40 3700 2600
545/82130 Q-Fit Floating 57 1067 100 50 4100 3600
545/82132 Q-Fit Floating 57 1200 100 50 4100 3600
545/82129 Q-Fit Floating 57 1200 120 50 5532 3600
Bars to be ordered separately
811/30088 - Fork pin dia. 50.7mm, length 1330mm
811/30070 - Fork pin dia. 57mm, length 1365mm

46
 TELEMASTER

Bale Handling
If you need to move bales around on a farm site, then the JCB Bale Handling
Attachments are invaluable tools. For total versatility, we offer 6 different bale
handling attachments to suit your every need, on a variety of machines.

• Options available for a range of pick ups and machines

• Bolt on bracket options for universal use

47
Single Bale Spikes
• For efficient handling of round bales
up to 1800mm diameter
• The lower tine prevents rotation
of the bale

Part Carriage Width Weight Usable tine Minimum machine

number pick up (mm) (kg) length (mm) capacity (kg)
980/88011 Pin & Cone 1220 80 980 1800

Twin or Single Bale Spike

• Removable tines, so that it can be
used as a single or twin bale spike
• Sold as a universal hanger with
optional bolt on brackets* (to be
ordered separately)
• Bolt on tines for safe transportation
and replacement, if worn or damaged

Part Carriage Width Weight Upper tine Lower tine Usable tine Height Minimum
number pick up (mm) (kg) length length length (mm) (mm) machine
(mm) (mm) capacity (kg)
980/A7819 No brackets* 1520 87 1250 810 987 415 3500
*Bolt on brackets available.

48
 TELEMASTER

High Back Bale Spike

• Sold as a universal hanger with
optional bolt on brackets*
(to be ordered separately)
• Designed to carry 3 Quadrant
bales or 2 Heston bales
• Bolt on tines for safe transportation
and replacement, if worn or damaged
• Tines are forged 40mm square

Part Carriage Width Weight Height fully Height not Usable tine Minimum
number pick up (mm) (kg) extended extended length (mm) machine
(mm) (mm) capacity (kg)
980/A7820 Universal* 1660 127 1925 1304 958 2500
*Bolt on brackets available.

Clap Hands Bale Grab

• No sharp edges, for handling wrapped
or unwrapped bales
• Double acting ram with check valve,
for maximum safety
• Ability to lock out one side, to aid stacking
• Can handle round or square bales

Part Carriage Capacity Width Weight Frame Paddle Frame Frame Overall Open Closed Minimum
number pick up (mm) (kg) height height depth width depth Centres Centres machine
(mm) (mm) (mm) (mm) (mm) (mm) (mm) capacity (kg)
980/B0723 Universal Single Bale 1384 177 435 700 323 1384 1368 1815 360 1500

49
Wrapped Bale Handler UPDATE
JCB Attachments are pleased to announce an update to our universal
wrapped bale handler. The operator now benefits from better visibility,
as well as a more modern tube design, for added strength.

• Better visibility through the attachment

for the operator
• Removable sleeves for versatility,
able to use as a wrapped bale
handler or bale spike
• A more modern tube design,
for added strength

Part Carriage Width Height Depth Open Closed Weight Tube Usable Minimum
number pick up (mm) (mm) (mm) centres centres (kg) length tine length machine
(mm) (mm) (mm) (mm) capacity (kg)
980/B0724 Universal 1687 701 1489 1575 800 183 1183 988 1500

With a universal pick up, the bale handler works most productively
when used with JCB bolt-on-brackets.

Product number Bracket Mass (kg)

980/B0380 Q-Fit 53.4
980/B0685 Pin & Cone 70.6
980/B0708 HD Q-Fit 101
980/B0709 HD Pin & Cone 82.7

50
 TELEMASTER

Grain Pusher
Designed to make optimum use of your grain store capacity. It has a 2286mm (90in)
blade and a tubular frame, for ultimate strength and minimum weight.

• This attachment is especially useful when operating over above-floor drying ducts
• Because there are no flat edges, your grain can fall freely
• A tubular frame using high-tensile steel, maximises strength and minimises weight
• Designed for ultimate performance, reliability and productivity, the JCB Grain
Pusher is the only approved attachment of its type for JCB machines

Part Carriage Width Size Weight Minimum machine

number pick up (mm) (Ft in) (kg) capacity (kg)
980/A9910 Q-Fit 2438 10 Ft 440 3100
980/A9912 Q-Fit 2433 12 Ft 6in 480 3100

51
Shear Grab UPDATE
The JCB Shear Grab features Hardox tines, a heavily reinforced construction
and a powerful action, ensuring that you can cut grass and maize silage cleanly
from the clamp, all day long.

• Enclosed front and sides • Improved pivot point

• Smooth clamp face cut • NEW side panels of 10mm
• Heavy-duty design Domex 420 MCD

• Suitable for loaders and telehandlers • 35mm Hardox tines

• Individual serrated blades

Part Carriage Tines Width Opening height Capacity Weight Minimum machine
number pick up (mm) (mm) (m3) (kg) capacity (kg)
980/B0725 Universal Welded 1300 800 0.92 540 1600
980/B0717 Universal Welded 1500 800 1.06 583 1800
980/B0718 Universal Welded 1800 800 1.28 673 2000
980/B0719 Universal Welded 2200 800 1.56 776 2200
980/B0720* Universal Welded 2200 1013 2.00 1093 2800
980/B0721* Universal Welded 2500 1013 2.20 1190 3000
*Compatible with heavy-duty, bolt on brackets only.

Above are all universal pick up with weld

on tines, designed to be used alongside
our bolt on brackets.

Product number Bracket Mass (kg)

980/B0380 Q-Fit 53.4
980/B0685 Pin & Cone 70.6
980/B0708 HD Q-Fit* 101
980/B0709 HD Pin & Cone* 82.7

52
 WHEEL LOADER
RANGE
General Purpose Shovels ......................................................................................... 56

6-in-1 Shovel ........................................................................................................... 57

Power Grab ........................................................................................................ 58-59

High Tip Shovels ...................................................................................................... 59

LOADER
RANGE

WHEEL
Muck Forks with Top Grab ...................................................................................... 60

Forks ....................................................................................................................... 60

Bale Handling ..................................................................................................... 61-63

Grass Forks ........................................................................................................ 64-65

Shear Grab .............................................................................................................. 66

ATTACHMENTS
ATTACHMENTS
WHEEL LOADER RANGE
Designed to deliver big performance and big power, JCB’s Wheel Loader is supported
by a number of attachments, from Folding Grass Forks to High Tip Shovels.
Our range is constantly improving and expanding to include new solutions too, helping
us to more than meet your needs and expectations, both now and into the future.

55
General Purpose Shovels
Our updated range of general purpose shovels are designed to tackle a wide
range of tasks. Manufactured using high quality steel, they are built to last even
through the toughest of applications.

• High quality steel design

• Drilled toeplates to allow bolt on toeplates
or teeth to be fitted
• Lightweight
• A range of sizes to suit all applications
• Designed for maximum durability
and productivity

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
400/C2687 Euro 1200 0.3 132 700
400/C4969 Euro 1200 0.4 131 700
400/D7259 Euro 1480 0.4 153 700
400/C2711 Euro 1480 0.5 152 700
334/T3815 Industrial (Volvo) 1750 0.8 283 1500
334/T3389 Industrial (Volvo) 1900 0.9 298 1500
400/C2689 Weidemann 1200 0.3 136 450
400/C5041 Weidemann 1200 0.4 136 450
400/D7267 Weidemann 1480 0.4 157 450
400/C2735 Weidemann 1480 0.5 156 450
400/C2691 Schaffer 1200 0.3 148 450
400/C5263 Schaffer 1200 0.4 142 450
400/D7270 Schaffer 1480 0.4 169 450
400/C2736 Schaffer 1480 0.5 163 450
400/C2688 Giant 1200 0.3 137 450
400/C5035 Giant 1200 0.4 138 450
400/D7262 Giant 1480 0.4 158 450
400/C2731 Giant 1480 0.5 159 450
All machine compatibility based on JCB machine stability and capacity figures.

56
 WHEEL LOADER

6-in-1 Shovel
• Increases machine versatility: dozing, loading, digging, grabbing,
backfilling and grading, all possible from one unit

DOZING LOADING DIGGING

GRABBING GRADING BACKFILLING

Part Carriage Width Capacity Weight Machine Minimum machine

number pick up (mm) (m3) (kg) models capacity (kg)
334/55111 Industrial (Volvo) 1900 0.8 495 407 WLS 1500
All machine compatibility based on JCB machine stability and capacity figures.

57
Power Grabs
Our power grabs have been redesigned to further enhance the capabilities of your
machine and ensure it is working to its maximum performance and efficiency. All grabs
are provided with suitable tail hoses and quick release couplings, making sure when it
arrives, it is ready to go straight to work.

• Wide range of tine options, using forged • Larger electroplated pivot pins, which can
and Hardox variations to suit all be greased and strategically placed wear
applications, featuring improved bosses strips to prolong life, help dissipate stress
on the forged tines on the top grab to and reduce the cost of ownership
maximise strength • Improved spill guard design, to protect
• Larger opening top grab with a greater the hitch on the machine
clamping force, to handle bigger and • Greater visibility of the end tines from the
bulkier loads. With improved geometry, cab, to ensure precise material handling
enabling it to work up to a wall and robot and maximum ram protection
welded folded steel, to add superior
strength and rigidity throughout
• Hoses are clamped neatly out of the way
of debris, to reduce the chance of damage

58
 WHEEL LOADER

Power Grabs
Part Carriage Tines Width Capacity Weight Tine Number Tine Minimum
number pick up (mm) (m3) (kg) length of tines spacing machine
(mm) (mm) capacity (kg)
980/B0052 Industrial (Volvo) KV-KV 2325 1.7 566 980 9 265 2000
980/B0053 Industrial (Volvo) H-H 2325 1.7 763 980 9 265 2500
980/B0029 Industrial (Volvo) H-H 2450 1.8 799 980 10 252 3000
980/B0030 Industrial (Volvo) H-H 2450 2.4 769 1100 10 252 3500
980/B0031 Industrial (Volvo) H-H 2590 2.6 784 1100 10 268 3500
980/B0036 Euro KV-KV 1710 0.9 285 810 8 211 1500
980/B0037 Euro KV-KV 1850 0.9 299 810 8 211 1500
980/B0038 Euro KV-KV 2010 1.0 310 810 9 230 1500
Tines: KV - Kverneland tines H - Hardox tines.

High Tip Shovels

• Designed to be able to tip loads over
high sided trailers, with minimal spilling
• High strength, durable steel

Part Carriage Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
980/A7568 Industrial 2700 3.5 1900 4300
980/A7569 Industrial 2700 3.8 2000 3400

59
Muck Forks with Top Grab
• A versatile attachment for moving manure,
muck, silage and bales
• A proven design, working hard, day in,
day out, year on year, highly valued by
owners and operators
• Heavy-duty construction and powerful rams, ensure
that even the most compacted manure can be efficiently shifted

Part Carriage Tines Width Capacity Weight Minimum machine

number pick up (mm) (m3) (kg) capacity (kg)
980/B0314 Euro - 1082 0.3 149 450
980/B0317 Euro - 1402 0.4 172 450
980/B0312 Weidemann - 892 0.2 132 450
980/B0315 Weidemann - 1082 0.3 133 450
980/B0319 Weidemann - 1402 0.4 171 450
980/B0313 Schaffer - 892 0.3 147 450
980/B0316 Schaffer - 1082 0.3 163 450
980/B0320 Schaffer - 1402 0.4 186 450
980/A2681 Schaffer F 1082 0.5 403 450
980/B0311 Giant - 892 0.3 133 450
980/D0644 Giant - 1202 0.3 154 450
980/B0318 Giant - 1402 0.4 173 450
Tines: F - Forged tines.

Fork and Frames

Part Carriage Width of Height Weight Length Width Distance Minimum
number pick up carriage (mm) (kg) of forks of forks between forks machine
(mm) (mm) (mm) (mm) capacity (kg)
335/A1367 Euro 1100 407 179 1070 100 726 max - 100 min 590
335/A1375 Weidemann 1100 407 168 1070 100 726 max - 100 min 590
335/E9042 Schaffer 1100 407 184 1070 100 726 max - 100 min 590
335/B1878 Giant 1100 407 171 1070 100 726 max - 100 min 590

60
 WHEEL LOADER

Bale Handling
If you need to move bales around on a farm site, then the JCB Bale Handling
Attachments are invaluable tools. For total versatility, we offer 6 different bale
handling attachments to suit your every need, on a variety of machines.

• Options available for a range of pick ups and machines

• Bolt on bracket options for universal use

61
Twin or Single Bale Spike
• Removable tines, so that it can be
used as a single or twin bale spike
• Sold as a universal hanger with
optional bolt on brackets* (to be
ordered separately)
• Bolt on tines for safe transportation
and replacement, if worn or damaged

Part Carriage Width Weight Upper tine Lower tine Usable tine Height Minimum
number pick up (mm) (kg) length length length (mm) (mm) machine
(mm) (mm) capacity (kg)
980/A7819 No brackets* 1520 87 1250 810 987 415 3500
*Bolt on brackets available.

High Back Bale Spike

• Sold as a universal hanger with
optional bolt on brackets*
(to be ordered separately)
• Designed to carry 3 Quadrant
bales or 2 Heston bales
• Bolt on tines for safe transportation
and replacement, if worn or damaged
• Tines are forged 40mm square

Part Carriage Width Weight Height fully Height not Usable tine Minimum
number pick up (mm) (kg) extended extended length (mm) machine
(mm) (mm) capacity (kg)
980/A7820 Universal* 1660 127 1925 1304 958 2500
*Bolt on brackets available.

62
 WHEEL LOADER

Clap Hands Bale Grab

• No sharp edges, for handling wrapped
or unwrapped bales
• Double acting ram with check valve,
for maximum safety
• Ability to lock out one side, to aid stacking
• Can handle round or square bales

Part Carriage Capacity Width Weight Frame Paddle Frame Frame Overall Open Closed Minimum
number pick up (mm) (kg) height height depth width depth Centres Centres machine
(mm) (mm) (mm) (mm) (mm) (mm) (mm) capacity (kg)
980/B0723 Universal Single Bale 1384 177 435 700 323 1384 1368 1815 360 1500

Wrapped Bale Handler UPDATE

JCB Attachments are pleased to announce an update to our universal
wrapped bale handler. The operator now benefits from better visibility,
as well as a more modern tube design, for added strength.

• Better visibility through the attachment

for the operator
• Removable sleeves for versatility,
able to use as a wrapped bale
handler or bale spike
• A more modern tube design
for added strength

Part Carriage Width Height Depth Open Closed Weight Tube Usable Minimum
number pick up (mm) (mm) (mm) centres centres (kg) length tine length machine
(mm) (mm) (mm) (mm) capacity (kg)
980/B0724 Universal 1687 701 1489 1575 800 183 1183 988 1500

With a universal pick up, the bale handler works most productively,
when used with JCB bolt on brackets.

Product number Bracket Mass (kg)

980/B0686 Industrial 57.3
980/B0707 Zettelmeyer 53.6
980/B0710 HD Industrial 106

63
Folding Grass Forks UPDATE
JCB Attachments are pleased to announce the introduction of a new Folding
Grass Forks range, for agricultural contractors operating a wheel loader.

• The JCB Folding Grass Forks are

perfect for the handling of silage and
any loose material
• Hydraulically operated side extensions
allow you to reduce the unit width, for
easy roading and safe transportation
• A service hose storage is available to
protect hoses
• Wear resistant steel provides extended
product life cycle, reducing service costs
• Bushed heavy-duty 65 mm pivot pins
• Protection frame and lighting kit are
available as options, for additional safety
during transportation
• Extensive testing has been carried out
to ensure efficiency and productivity
are maximised

Part Carriage Open Closed Nominal Mass Height Number Length Space Capacity Minimum
number pick up width width width (kg) (m) of tines of tines between (m3) machine
(m) (m) (ft) (m) tines (mm) capacity (kg)
980/C1008 Q-Fit 3.62 2.97 12 1291 1.43 15 1.19 200 5.5 3300
980/C1007 Industrial 3.62 2.97 12 1292 1.43 15 1.19 200 5.5 3300
980/C1000 Industrial 4.40 2.97 14 1680 1.43 19 1.19 200 6.7 3400
980/C1013 Industrial 4.88 2.97 16 1784 1.43 21 1.19 200 7.1 4200

Part number 980/C1008 980/C1007 980/C1000 980/C1013

Nominal width (ft) 12 12 14 16
Protection frame 980/C1014
Lighting Kit (Requires protection frame and installation kit) 980/C1009
Lighting installation kit (for WLS)* 980/C1010
Lighting installation kit (for WLS T5)* 980/C1011
*If the machine is fitted with a 6 pin breakout connector, then 980/C1011 is required.
If the machine is not fitted with a 6 pin breakout connector, then 980/C1010 is required.

64
 WHEEL LOADER

High Capacity Grass Forks

Designed specifically for handling large
volumes of grass during silage work,
the latest JCB High Capacity Grass
Forks are now available in more size
options than ever – from 2438mm
to 3048mm, plus extensions.
Features include, a rear spill guard
and Hardox tines.

Part Carriage Width Capacity Weight Tine spacing Tine length Minimum machine
number pick up (mm) (m3) (kg) (mm) (kg) capacity (kg)
980/A7707 Q-Fit 2440 3.2 905 232 1230 2000
980/A7708 Q-Fit 2745 3.6 1015 238 1230 2250
980/A7716 Industrial 2745 3.6 1015 238 1230 2250
980/A7717 Industrial 3048 4.0 1125 243 1230 2500
980/A7705 Grass fork extensions (pair)

65
Shear Grab UPDATE
The JCB Shear Grab features Hardox tines, a heavily reinforced construction
and a powerful action, ensuring that you can cut grass and maize silage cleanly
from the clamp, all day long.

• Enclosed front and sides • Improved pivot point

• Smooth clamp face cut • NEW side panels of 10mm
• Heavy-duty design Domex 420 MCD

• Suitable for loaders and telehandlers • 35mm Hardox tines

• Individual serrated blades

Part Carriage Tines Width Opening height Capacity Weight Minimum machine
number pick up (mm) (mm) (m3) (kg) capacity (kg)
980/B0725 Universal Welded 1300 800 0.92 540 1600
980/B0717 Universal Welded 1500 800 1.06 583 1800
980/B0718 Universal Welded 1800 800 1.28 673 2000
980/B0719 Universal Welded 2200 800 1.56 776 2200
980/B0720* Universal Welded 2200 1013 2.00 1093 2800
980/B0721* Universal Welded 2500 1013 2.20 1190 3000
*Compatible with heavy-duty, bolt on brackets only.

Above are all universal pick up with weld

on tines, designed to be used alongside
our bolt on brackets.

Product number Bracket Mass (kg)

980/B0686 Industrial 57.3
980/B0707 Zettelmeyer 53.6
980/B0710 HD Industrial 106

66
 COMPACT EXCAVATOR
RANGE
Excavator Pick up & Pin Dimensions ......................................................................... 69

Hitches ............................................................................................................... 70-71

Buckets ............................................................................................................... 72-75

Earth Drills ......................................................................................................... 76-77

Hydraulic Breakers .............................................................................................. 78-81

EXCAVATOR
COMPACT
RANGE

ATTACHMENTS
ATTACHMENTS
Compact Excavator Range
JCB’s range of mini and midi excavator equipment is expanding, and so are the
attachments to complement this range. JCB attachments allow you to tailor your
machine to suit a variety of applications. The following pages detail our range
of attachments for mini excavators up to 3.5T, that are now available from your
agricultural dealer.

69
JCB Excavator Pick Up & Pin Dimensions
Excavators
Machine model / weight Dimension A (mm) Dimension B (mm) ø C (mm)
8010 - 8020 90 97 ø25
15C - 19C 120 97 ø30
802, 8027, 8032 125 135 ø35
8025, 8030, 8035, 804, 8027, 8032 130 135 ø35
35Z, 36C 190 136 ø40

Manual Hitches
• Increases safety and reduces operator effort,
when changing buckets and attachments
• Durable design, with hardened steel jaws that keep wear to a minimum
• Mechanically operated with spring loaded lock, released by use of a tommy bar
• High visibility safety lock pin, prevents accidental loss of bucket or attachment

Part number Operation Weight (kg) Pin diameter (mm) Machine models
980/88424 Manual 12 25 Micro Plus, 8010-8020
980/B4000 Manual 14 30 15C, 16C, 18Z, 19C
980/88451 Manual 37 35 8025
980/88677 Manual 36 40 35Z, 36C

70
 COMPACT EXCAVATOR

Hydraulic Hitches
• Two independent locking mechanisms ensure the
attachment is held safely, ensuring operator safety
• Fully controlled from within the cab with boom position
sensors, to ensure operation within a safe zone
• Reduces downtime to change attachment and ensures optimum attachment is easily fitted
• CE marked and tested, for use on JCB Compact Excavators

Part number Operation Weight (kg) Pin diameter (mm) Machine models
980/B6000 Hydraulic** 97 30 19C*
980/L7109 Hydraulic 42 40 35Z, 36C
*Only compatible with the e-prop 19C machine model.

Conversion Hitches
Part number Operation Weight (kg) Conversion pick up pin centres (mm) Attachment pick up diameter (mm) Machine models
980/B5000 Conversion 801X 13.4 90 25 15C, 16C, 18Z, 19C
980/B7000 Conversion Kubota 13.4 90 30 15C, 16C, 18Z, 19C
980/88670 Mechanical conversion 36.7 128.5 35 35Z, 36C

Conversion Brackets
Part number Operation Weight (kg) Machine pin diameter (mm) Attachment pin diameter (mm) Machine models
400/T6913 Conversion 801X 10.5 30 25 15C, 16C, 18Z, 19C
400/T7138 Conversion Kubota 10.4 30 30 15C, 16C, 18Z, 19C

71
General Purpose Buckets
• A rolled top section increases
structural integrity
• Replaceable wear parts increase
durability and extend the working life
• Pivot pins/kits available to enable quickhitch
mounting, for increased productivity

Part number with pins Outer width (mm) Capacity (m3) Weight (kg) Pin size Machine models
980/A0326 150 0.008 13.1 25 Micro 8008
980/A0327 230 0.012 19.2 25 Micro 8008
980/A0328 300 0.018 21.4 25 Micro 8008
980/A0329 400 0.026 25.8 25 Micro 8008
980/A0331 160 0.009 21.2 25 8010 to 8020
980/A0332 230 0.014 26.4 25 8010 to 8020
980/A0333 300 0.019 29.4 25 8010 to 8020
980/A0334 400 0.026 34.8 25 8010 to 8020
980/A0335 450 0.041 37.3 25 8010 to 8020
980/A0336 600 0.046 44.4 25 8010 to 8020
980/B0521 150 0.011 20.8 30 15C, 16C, 18Z, 19C
980/B0522 230 0.02 22.2 30 15C, 16C, 18Z, 19C
980/B0523 300 0.027 24.4 30 15C, 16C, 18Z, 19C
980/B0524 400 0.039 28.7 30 15C, 16C, 18Z, 19C
980/B0525 450 0.044 30.3 30 15C, 16C, 18Z, 19C
980/B0526 600 0.061 36.1 30 15C, 16C, 18Z, 19C
980/A0338 230 0.023 52.0 35 8024 to 8026**
980/A0339 300 0.033 62.5 35 8024 to 8026**
980/A0340 460 0.054 75.8 35 8024 to 8026**
980/A0341 600 0.074 89.9 35 8024 to 8026**
980/A0342 760 0.094 104 35 8024 to 8026**
980/B0486 250 0.03 59.7 40 35Z, 36C
980/B0485 300 0.036 62.9 40 35Z, 36C
980/B0470 450 0.056 75.3 40 35Z, 36C
980/B0471 600 0.075 87.8 40 35Z, 36C
980/B0472 750 0.095 97.3 40 35Z, 36C
*Requires 2 x bucket pins 522/03301. **Optional weld in bucket pins 980/86023.

72
 COMPACT EXCAVATOR

Bladed Buckets
Bladed buckets are commonly used in the
utility sector and can be used in a number
of others. The key benefits include:

• Purpose designed, for use with a quickhitch

• Pins set close to bucket shell, boost
tear-out performance
• Long, flat base, improves bottom
trenching and load retention

Part number with pins Outer width (mm) Capacity (m3) Weight (kg) Pin size Machine models
980/B0501 150 0.011 20.4 30 15C, 16C, 18Z, 19C
980/B0502 230 0.02 22.8 30 15C, 16C, 18Z, 19C
980/B0503 300 0.027 25.8 30 15C, 16C, 18Z, 19C
980/B0504 400 0.039 30.1 30 15C, 16C, 18Z, 19C
980/B0505 460 0.044 32.3 30 15C, 16C, 18Z, 19C
980/B0506 610 0.061 38.7 30 15C, 16C, 18Z, 19C
980/B0473 250 0.03 54.8 40 35Z, 36C
980/B0474 300 0.037 59.0 40 35Z, 36C
980/B0475 450 0.057 71.7 40 35Z, 36C
980/B0476 600 0.077 84.5 40 35Z, 36C
980/B0477 750 0.097 97.1 40 35Z, 36C

73
Dedicated Quickhitch Buckets
• Purpose designed, for use with a quickhitch
• Pins set close to bucket shell, boost
tear-out performance
• Long, flat base, improves bottom
trenching and load retention

Part number with pins Outer width (mm) Capacity (m3) Weight (kg) Pin size Machine models
980/90598 230 (9) 0.022 42.8 35 8024 to 8026
980/90599 305 (12) 0.033 50.3 35 8024 to 8026
980/90600 450 (17.7) 0.057 55.00 35 8024 to 8026
980/90601 600 (23.6) 0.08 63.6 35 8024 to 8026
980/90602 750 (29.5) 0.103 74.3 35 8024 to 8026

Ditch Maintenance Buckets

• A central reinforcing plate gives
added strength and rigidity
• A rolled top section
increases structural integrity
• Drainage holes on ditch
maintenance buckets allow
water to escape,
giving a better fill factor

Part number no pins Part number with pins Outer width (mm) Capacity (m3) Weight excluding pins (kg) Pin size Machine models
239/00190 980/A0330 700 0.026 32 25 Micro 8008
522/06400 - 750 0.044 40 25 8010, 8014 to 8020
522/00900 980/A0337 900 0.078 46 25 8014 to 8020
522/01600 - 1000 0.087 50 25 8014 to 8020
980/B0107 - 760 0.067 36.8 30 15C, 16C, 18Z, 19C
980/B0108 - 1000 0.091 44.9 30 15C, 16C, 18Z, 19C
980/90506 980/A0343 1000 0.076 78 30 8024 to 8026
980/A0540* - 1000 0.098 57 30 8024 to 8026
980/B0492 980/B0493 1200 0.1 138 40 35Z, 36C
*Quickhitch only.

74
COMPACT EXCAVATOR

75
Earth Drills
• For accurate and precise drilling of fence and post holes
• Heavy-duty gearbox and compact, powerful drive head
• Complete with hanger bracket and connection hoses

Part number Maximum flight diameter (mm) Torque (Nm) Weight (kg) Pin size Machine models
980/A4162 300 1500 59.4 25 Micro 8008
980/B3202 460 1500 63.8 30 15C, 16C, 18Z, 19C
980/A4309 760 3500 130 35 8024 to 8026
980/A7024 380 3500 105 40 35Z, 36C

76
 COMPACT EXCAVATOR

Flight Options
Model name Diameter (mm) Weight (kg)
STANDARD FLIGHTS (SHORT): 1000mm long, bolt-on teeth, for light to moderate ground conditions
980/A2020 160 15
980/A2021 230 28
980/A2024 300 38
980/A2026 380 45
STANDARD FLIGHTS: 1200mm long, bolt on teeth, for light to moderate ground conditions
980/A2019 160 19
980/A2022 230 39
980/A2023 300 52
980/A2025 380 60
980/A2027 460 80
980/A2028 600 12
980/A2029 760 14
980/A2030 900 20
HEAVY DUTY FLIGHTS: 1200mm long, socketed teeth, for difficult ground conditions: compacted soils, heavy clay, asphalt, frozen ground and fracturable rock
980/A2031 230 45
980/A2032 300 58
980/A2034 380 63
980/A2035 460 92
980/A2037 600 124
980/A2038 760 141
980/A2039 900 195
ROCK DUTY FLIGHT: 1200mm long, carbide bullet style teeth, for solid, fracturable rock, frozen ground and compacted soils
980/A2040 300 49
980/A2042 460 91
Adjustable extension bar, up to 1000mm
980/A2043 - -

Standard Duty Heavy Duty Rock Duty

77
Professional Breakers
The professional breaker range has been designed and built with to withstand the more
arduous breaking tasks. These breakers are able to power through even the toughest
of applications, living up to the expectations set by the professional range.

• Supplied ‘ready to go’ with hoses, hangar

bracket, moil and chisel tools. No hangar
brackets or hoses on universal models
• Solid body design provides maximum
strength, with lower weight
• Durable design with low
maintenance accumulator,
helps reduce maintenance costs
• Exact match of tool and piston diameter
maximises blow energy transfer
• Energy not absorbed by the material
being broken is used to lift the tool, which
pressurises the accumulator ready for the
next blow. Reusing this energy, increases
impact force and reduces running costs
• Class-leading, power-to-weight ratio
• Silence as standard, to reduce noise pollution

Model Part Pick up Pin Operating Blow rate Tool Oil flow Pressure Impact Noise Carrier Machine
number mount size weight (bpm) diameter (l/min) (bar) energy level weight models
(kg) (mm) (j) (dBA) (tonnes)
HM100Q 980/88320 Top 25 115 900 - 1320 45 15 - 32 160 170 119 0.5 - 2.0 Micro 8008 to 8018
HM100Q 980/H6662 Top 30 115 900 - 1320 45 15 - 32 160 170 119 0.5 - 2.0 15C, 16C, 18Z, 19C
HM140Q 980/A4685 Side 30 127 960 - 1320 50 15 - 40 210 240 124 1.5 - 4.0 15C, 16C, 18Z, 19C
HM140Q 980/A4408 Side 35 127 960 - 1320 50 15 - 40 210 240 124 1.5 - 4.0 8020 to 8026
HM166Q 980/A7840 Universal* - 162 1020 - 1750 50 40 - 60 100 - 150 252 86 1.2 - 3.2 Universal
HM166Q 980/A7020 E18 40 165 1020 - 1750 50 40 - 60 150 252 115 3.5 35Z, 36C
HM266Q 980/A7021 E18 40 228 720 - 1400 65 42 - 75 150 376 118 3.5 35Z, 36C
*No hanger brackets or hoses.

78
 COMPACT EXCAVATOR

High Pressure Ready to Go, with

Accumulator hanger hoses

Silence as
standard

Single Piece
Hardened Body

Maximum
Efficiency &
Performance

Dust Wiper

Oval Tool
Retainers

Tool matched Floating

to piston size Bottom Bush

Breaker tools
Breaker model HM100Q HM140Q HM166Q HM266Q
Part number 980/88320 980/H6662 980/A4685 980/A4408 980/A7840 980/A7020 980/A7021
Moil 929/07549 332/A0108 331/52394 333/C8899
Chisel (cross cut/H) 929/07586 332/A0812 331/52395 -
Wide transverse chisel (wedge in line/V) - - 331/52397 331/52499
Blunt (flat end) - - 331/52398 333/C8903
Wide chisel 929/35011 - 331/53296 331/52498
Asphalt cutter - - 331/52399 333/C8904
Asphalt cutter transverse - - 331/52400 333/C8905

79
Contractor Breakers
Our contractor breaker range has been designed where overall project cost is key,
offering unrivalled value for money to the rental and construction sectors. These
versatile breakers are fully approved and tested for flow, pressure, compatibility and
fitment, as part of every machine development programme we carry out.

• Stroke adjusters on the HM054T allow

operators to adjust the tool speed and
stroke length for increased productivity
• Accumulators ensure that machines
are completely protected from hydraulic
pressure spikes
• Internal control valves deliver higher
efficiency and are far less vulnerable
than competitors products featuring
external units
• Available as side mount, top mount or
universal for non JCB machinery
• Vibro isolation rubber buffers absorb
repercussion from hammering, to reduce
damage to the carrier
• Twin oval tool retaining pins deliver double
the service life of a standard pin
• Rock claw with anti abrasion tool made
from Hardox steel, for shifting material in
readiness for breaking
• Moil & chisel tool provided as standard
• Topped up using hand held grease gun
• Comes with gas charging kit, unless
stated otherwise

80
 COMPACT EXCAVATOR

Model Part Pick up Pin Operating Blow rate Tool Oil flow Pressure Impact Noise Carrier Machine
number mount size weight (bpm) diameter (l/min) (bar) energy level weight models
(kg) (mm) (j) (dBA) (tonnes)
HM012T 980/A6283 Side 25 120 800 - 1400 40 12 - 25 90 - 120 300 110 0.5 - 2.0 Micro 8008 to 8018
HM012T 980/B5211 Top 30 120 800 - 1400 40 12 - 25 90 - 120 300 110 0.5 - 2.0 15C, 16C, 18Z, 19C
HM012T 980/A6282 Universal* 25 120 800 - 1400 40 12 - 25 90 - 120 300 110 0.5 - 2.0 Universal
HM018T 980/B0260 Top 30 187 600 - 1500 57 23 - 70 90 - 120 560 125 1.5 - 4.0 8020 to 8026
HM018T 980/B0261 Top 30 187 600 - 1500 57 23 - 70 90 - 120 560 125 1.5 - 4.0 8020
HM018T 980/A7022 E18 40 192 600 - 1500 57 23 - 70 175 560 125 3.5 35Z, 36C
HM018T 980/B0262 Universal* 30 187 600 - 1500 57 23 - 70 90 - 120 560 125 1.5 - 4.0 Universal

Breaker tools
Breaker model HM012T HM018T
Moil 400/E4545 334/C6976
Chisel (cross cut/H) 400/E4546 334/C6978
Transverse chisel (wedge in line/V) - 335/H7422
Blunt (flat end) - 335/H7423
*No hanger brackets or hoses.

81
Notes

82
 SKID STEER
RANGE
Augers ..................................................................................................................... 86

Bale Spear ............................................................................................................... 87

Sweeper Collectors ................................................................................................. 87

Angle Brooms .......................................................................................................... 88

Brush Cutters .......................................................................................................... 88

Shovels ............................................................................................................... 89-90

Dozer Blade ............................................................................................................. 91

Pallet Forks ............................................................................................................... 91

Forestry Cutting Head ............................................................................................. 92

Grapples .................................................................................................................. 93

Silage Defacer .......................................................................................................... 94

Snow Attachments ............................................................................................. 94-95 SKID STEER

RANGE

ATTACHMENTS
ATTACHMENTS
Skid Steer Range
JCB’s range of attachments give you ultimate versatility to your Skid Steer Loader.
From shovels to sweepers and snow blades to patch planers, optional JCB 7-way,
multi-function joysticks, allow you to easily use any of them to their full potential.
This means you can use your JCB skid steer all year round, from landscaping to
snow clearing. Regardless of what attachments you choose, you can rest assured
they’ve been designed to stringent JCB standards and built to perfectly
complement your machine.

85
Augers
• Sealed planetary gear reduction with
heavy-duty gear design provides long life and
minimal maintenance, with low service costs
• Reverse rotation for quick back out, which
aids in shedding material from the auger bit
• Hydraulic relief valve protects the unit from
damage, if auger comes in to contact with a
large immovable object

Part Model Flow Torque at 172 bar

190T
215T

250T
270T
300T
325T
number demand (Nm)

135
155
175
190
215

250
270
300
332/L3978 PASF standard 2700 • • • • • • • • • • • • • •
332/L3979 PAHF high 4900 • • • • • • •
AUGER BITS 1200mm long, 2in hex drive, bolt-on teeth, for light to moderate ground conditions
STANDARD DUTY bolt-on teeth, for light to moderate ground conditions
Part Diameter
number (mm)
980/A2019 150 • • • • • • • • • • • • • •
980/A2021 230 • • • • • • • • • • • • • •
980/A2023 305 • • • • • • • • • • • • • •
980/A2025 380 • • • • • • • • • • • • • •
980/A2027 460 • • • • • • • • • • • • • •
980/A2028 610 • • • • • • • • • • • • • •
980/A2029 760 • • • • • • • • • • • • • •
980/A2030 915 • • • • • • • • • • • • • •
HEAVY DUTY socketed teeth, for difficult ground conditions: compacted soils, heavy clay, asphalt, frozen ground and fracturable rock
980/A3001 150 • • • • • • • • • • • • • •
980/A2031 230 • • • • • • • • • • • • • •
980/A2032 305 • • • • • • • • • • • • • •
980/A2034 380 • • • • • • • • • • • • • •
980/A2035 460 • • • • • • • • • • • • • •
980/A2037 610 • • • • • • • • • • • • • •
980/A2038 760 • • • • • • • • • • • • • •
980/A2039 915 • • • • • • • • • • • • • •
TREE AND SHRUB bolt-on teeth, pilot flight for tree and shrub planting
980/L7251 460 • • • • • • • • • • • • • •
980/L7257 610 • • • • • • • • • • • • • •
980/L7267 760 • • • • • • • • • • • • • •
980/L7270 915 • • • • • • • • • • • • • •
AUGER BITS 1200mm long, 2in hex drive, bolt-on teeth, for light to moderate ground conditions
Part Length
number (mm)
980/L7271 305 • • • • • • • • • • • • • •
980/L7272 460 • • • • • • • • • • • • • •
980/L7273 610 • • • • • • • • • • • • • •

86
 SKID STEER

Bale Spear
• Heavy-duty frame with replaceable tines
• Designed to keep bales close to
machine for safe handling
• Load guard protects and
stabilises the load

Part Model

3TS-8W/Ret.*
3TS-8W/Ext.*
number 190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300
333/L5627 BSP • • • • • • • • • • • • • • • •

Sweeper Collectors
• 50/50 poly wire brush segments for long-term durability
• Heavy-duty one piece canopy for
superior structural strength
• Optional water kit and gutter
brush available
• Large diameter drive shaft
and generous bearings for
increased durability
• Operates in forward or reverse
direction, increasing productivity

Part Model Operating width Hopper capacity

190T
215T

250T
270T
300T
325T

number (mm) (m3)

135
155
175
190
215

250
270
300

980/A7495 SC150 1525 0.46 • • • • •

980/A7496 SC180 1850 0.50 • • • • • • •
980/A1295 SC214 2140 0.64 • • • • • • •
*Ret.- Retracted. Ext.- Extended.

87
Angle Brooms
• 813mm diameter poly wire brush provides
long-term durability
• Bristle replacement is simplified thanks to
the drive motor detaching from the core, with
no need to disconnect hydraulic lines
• Reinforced hood design provides maximum strength
at the end of the hood, where high stress may occur
• Fold away storage stands protect bristles from flattening, when not in use

Part Model Operating width Operating width

190T
215T

250T
270T
300T
325T
number straight (mm) 30° (mm)

135
155
175
190
215

270
300
250
332/X2465 BR60 1520 1320 • • • • • • •
332/L3992 BR72 1830 1585 • • • • • • •
332/L4027 BR84 2030 1850 • • • • • •
HYDRAULIC ANGLE KIT - ANGLE BROOM
Hydraulic Angle Kit for Angle Broom
332/L3983 • • • • • • • • • • • • • •
(Requires Optional 7 Way Joysticks)

Brush Cutters (Requires additional guarding)

• Stump jumper feature protects gearbox
in the event of a sudden impact
• High deck clearance and unobstructed
deck design prevents debris build up
and improves overall performance
• Blade-stall indicator allows blade speed monitoring
• High speed, dual rotation blades cut and mulch heavy brush up to 100mm in diameter
• Access ports and hinged shrouding for easy routine maintenance
• 6mm steel deck with reinforced side plates provide high strength and durability

Part Model Flow Overall Cutting

3TS-8W/Ret.*

number demand width width

(mm) (mm)
/270T
190T
215T

250T

300T
325T
135
155
175
190
215

250
270
300

332/X4291 BC72 Standard 2160 1830 • • • • • • • • • •

332/X4292 BC72HF High 2160 1830 • • • • • • • •
332/X4293 BC78HF High 2310 1980 • • • • • •
*Ret.- Retracted.

88
 SKID STEER

Dirt/General Purpose Shovels

• Shorter bucket floor provides
maximum breakout forces, with
great visibility to the cutting edge

Part Model Width Length Height Weight Capacity

3TS-8W/Ret.*
number (mm) (mm) (mm) (kg) (m3)

190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300
333/L8800 DB54 1370 797 515 136 0.35 •
333/L8803 DB60 1520 797 515 150 0.36 • • • • •
332/X3184 DB66 1680 833 521 200 0.39 • • • • • • •
333/L4683 DB68 1730 833 521 205 0.41 • • • • • • •
332/L1798 DB72 1830 833 521 213 0.43 • • • • •
333/L4684 DB75 1910 833 523 236 0.45 • • • • •
332/X3180 DB78 1980 833 521 245 0.47 • • • • • • • •
332/L1825 DB84 2130 833 521 260 0.50 • • • • • •

6-in-1 Shovels
• 6-in-1 multi-purpose buckets let you
dig, load, spread, grade, grab and doze -
all with one tool

Part Model Width Length Height Weight Capacity

190T
215T

250T
270T
300T
325T

number (mm) (mm) (mm) (kg) (m3)

135
155
175
190
215

250
270
300

333/L9488 MPB60 1520 869 688 202 0.34 • • • • •

332/X4315 MPB66 1680 874 693 259 0.44 • • • • • • •
332/L3338 MPB72 1830 953 701 351 0.57 • • • • •
332/L3339 MPB78 1980 965 709 381 0.64 • • • • • • •
332/L3340 MPB84 2130 965 709 401 0.66 • • • • •
*Ret.- Retracted.

89
Light Material Shovels
• High capacity buckets for rehandling and
transporting lightweight materials

Part Model Width Length Height Weight Capacity

3TS-8W/Ret.*
3TS-8W/Ext.*
number (mm) (mm) (mm) (kg) (m3)

190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300
332/L1829 LMB75 1910 925 627 287 0.59 • • • • • • • • • • •
332/L1830 LMB84 2130 965 635 331 0.75 • • • • • • • •
332/L1831 HCB84 2130 1041 904 336 1.24 • • • • • •
332/L1834 HCB96 2440 1087 922 399 1.56 • • • • • •

Snow Shovels
• High volume buckets for snow
removal, with cut out back plate for
good visibility to bucket edge

Part Model Width Length Height Weight Capacity

3TS-8W/Ret.*
3TS-8W/Ext.*

number (mm) (mm) (mm) (kg) (m3)

190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300

332/X2435 MSB54 1370 1148 790 247 0.71 •

332/X2453 MSB66 1680 1148 790 281 0.8 • • • • • • •
332/X4311 MSB84 2130 1148 790 335 1.12 • • • • • • • • • • •
332/X4312 MSB96 2440 1148 790 367 1.3 • • • • • • • • •
332/X4313 HSB96 2440 1288 985 451 1.8 • • • • • •
332/X4314 HSB108 2740 1288 985 478 2.04 • • • • • •
*Ret.- Retracted. Ext.- Extended.

90
 SKID STEER

Dozer Blades (Requires multifunction controls)

• Dozer blade converts machine into a compact dozer
• 76mm diameter centre pin with hardened
steel bushings provide outstanding strength
• Tilt and angle functions are easily adjusted
‘on-the-go’ with JCB multi-function controls
• Tilt indicator in easy view from the operator’s seat
• Reversible bolt-on steel cutting edge, high carbon
replaceable steel skid shoe and heavy-duty cast
moldboard, offer long term durability

Part Model Blade Max. Working width Max.

number width angle at 30° angle tilt
(mm) (°) (mm) (°)

190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300
332/X4285 HDB84 2130 30 1857 10 • • • • •
332/X4287 HDB96 2440 30 2121 10 • • • • •
ADAPTER HARNESS FOR IN-CAB CONTROLS (Requires optional 7 way joysticks)
332/X4391 • • • • •

Pallet Forks
• Heavy-duty fork frame and tines rated
at 2720kg capacity
• Heavy-duty, see-through load guard
offers superior strength, while the flat
surface provides protection against
damaging the load

Part Model Fork length Maximum fork Minimum fork

190T
215T

250T
270T
300T
325T

number (mm) spacing (mm) spacing (mm)

135
155
175
190
215

250
270
300
330

332/L3341 PF42 1070 1140 230 • • • • • • • • • • • • • • •

332/L3342 PF48 1220 2240 230 • • • • • • • • • • • • • •

91
Manure Forks
• Ideal for handling hay and packed material,
as well as cleaning up brush and limbs
• Ends of fork tines clearly visible
• Top grapple clamps hold load in place,
reducing spillage while transporting material

Part Model Width Weight

190T
215T

250T
270T
300T
325T
number (mm) (kg)
135
155
175
190
215

250
270
300
333/L6079 MFG60 1520 189 • • • • •
333/L6106 MFG66 1680 208 • • • • • • •
980/88222 MFG67 1700 233 • •
332/L3869 MFG72 1830 215 • • • • •
332/L3879 MFG84 2130 238 • • • • • •

Forestry Cutting Head (Requires additional guarding and multifunction controls)

• Extreme-duty design uses a high output variable displacement
piston motor to provide maximum productivity
• Hydraulically adjustable deflector door allows
control of discharge and size of processed material
• In-line hydraulic oil cooler protects the hydraulic system
• Easy-to-view gauge allows operator
to monitor hydraulic operating pressure
• 2000 rpm drum with 20mm drum wall
• Heavy-duty adjustable push bar, aids in
toppling trees and offers additional
protection to the carrier

Part Model Cutting width Flow

190T
215T

250T
270T
300T
325T

number (mm) demand

135
155
175
190
215

250
270
300

334/L8351 FC60HF 1520 High • • • • • • •

92
 SKID STEER

Brush Grapples
• Dual, independent grapples hold irregularly
shaped material securely in place
• 1016mm grapple opening,
allows for large payloads
• Guards protect all ram components
from potential damage
• Standard load check valves provide
positive clamp force

Part Model Width Weight

190T
215T

250T
270T
300T
325T
number (mm) (kg)
135
155
175
190
215

250
270
300
333/L5021 HBG60 1520 324 • • • • •
333/L5022 HBG66 1680 335 • • • • • • •
332/L4030 HBG72 1830 420 • • • • •
332/L4033 HBG78 1980 453 • • • • • •
332/L4035 HBG84 2130 478 • • • • •

Scrap Grapples
• Heavy-duty design to withstand the
demands of harsh applications such as
scrap handling, recycling and demolition
• Dual, independent grapples hold irregularly
shaped material securely in place
• Guards protect all ram components
from potential damage
• Standard load check valves provide
positive clamp force
• 1016mm grapple opening allows for large payloads

Part Model Width Weight

190T
215T

250T
270T
300T
325T

number (mm) (kg)

135
155
175
190
215

250
270
300

333/L1085 HSG60 1520 318 • • • • •

333/L1109 HSG66 1680 335 • • • • • • •
332/L4036 HSG76 1930 490 • • • • •
332/L4039 HSG82 2080 514 • • • • •

93
Silage Defacer
• Inverted auger cutter design loosens and
removes silage from compacted clamps
• Open frame design provides great visibility
to the face of the clamp
• Maintains a smooth compacted clamp face to
reduce spoilage and improve palatability for livestock
• Cutting action of defacer maintains original silage cut length
• Inboard mounted motor allows cutting up to adjacent clamp walls
• Frame stand protects cutting rotor during storage

Part Model Working width Flow

190T
215T

250T
270T
300T
325T
number (mm) demand 135
155
175
190
215

250
270
300
332/X4338 SD96 2460 Standard • • • • • •

Snow Blowers
• 2-stage hydraulic snow blowers are able to throw snow up to 1.4m
• Poly-lined chute and deflector are easily set-up to direct
snow discharge using JCB multi-function controls
• Provides optimum visibility to working area
• Direct drive hydraulic motor design eliminates unnecessary
moving components, promoting less wear and longer life
• 635mm (Standard Flow) and 910mm (High Flow) shroud
openings, allow high volumes of snow to be moved quickly and efficiently
• Includes adjustable skid shoes and bolt-on, replaceable wear-resistant tapered steel edge

Part Model Working Working Flow

190T
215T

250T
270T
300T
325T

number width (mm) height (mm) demand

135
155
175
190
215

250
270
300

333/L6154 SBL60 1520 610 Standard • • • • • • •

332/X4383 SBL72 1830 635 Standard • • • • • • • • •
332/X4384 SBL78 1980 635 Standard • • • • • • • • •
332/X4385 SBL84 2130 635 Standard • • • • • •
334/L2463 SBL72SPHF 1830 890 High • • • • • •
332/X4399 SBL72HF 1830 915 High • • •
334/L2491 SBL78SPHF 1980 890 High • •
332/X4400 SBL78HF 1980 915 High • • • • • • •
332/X4401 SBL84HF 2130 915 High • • • • • •

94
 SKID STEER

Snow Blades
• Replaceable wear edge, adjustable skid shoes
and spring loaded trip mechanism
• Standard-duty models include locking bolts
for light-duty dozing applications
• Heavy-duty models feature reinforced
steel blade construction
• 6° floating tilt gives cleaner removal
on uneven roads

Part Model Blade Duty Max Working width

3TS-8W/Ret.*
3TS-8W/Ext.*
number width angle at 30° angle
(mm) (°) (mm)

190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300
MANUAL ANGLE ADJUSTMENT
333/L8499 SBM60 1520 Standard ±30 1320 • • • • • • • • •
332/X4347 SBM72 1830 Standard ±30 1575 • • • • • • •
332/X4348 SBM84 2130 Standard ±30 1855 • • • • • • • •
332/X4349 SBM96 2440 Standard ±30 2110 • • • • • • • •
HYDRAULIC ANGLE ADJUSTMENT
333/L8498 SBH60 1520 Standard ±30 1320 • • • • • • • • •
332/X4350 SBH72 1830 Standard ±30 1575 • • • • • • •
332/X4351 SBH84 2130 Standard ±30 1855 • • • • • • • •
332/X4352 SBH96 2440 Standard ±30 2110 • • • • • • • •
332/L3915 HSB96 2440 Heavy ±30 2110 • • • • • •
332/L3927 HSB108 2470 Heavy ±30 2360 • • • • • •
332/L3932 HSB120 3050 Heavy ±30 2640 • • • • • •

Snow Pushers - Manual tilt angle adjustment

• Efficiently moves large volumes of snow
and can be used for waste clean-up
• All models feature reversible and
replaceable wear shoes

Part Model Width

3TS-8W/Ret.*
3TS-8W/Ext.*

number (mm)
190T
215T

250T
270T
300T
325T
135
155
175
190
215

250
270
300

333/L5629 SBM72 1965 • • • • • • • • •

333/L5640 SBM84 2270 • • • • • • • • •
333/L5646 SBM96 2575 • • • • •
*Ret.- Retracted. Ext.- Extended.

95
96
 LIGHT EQUIPMENT
RANGE
Dumpsters ..................................................................................................... 100-101

Universal Fast Charger and Charge Guard ....................................................... 102-103

Power Packs .......................................................................................................... 104

Handheld Breakers ................................................................................................. 105

Pumps ............................................................................................................ 106-107

Earth Drill .............................................................................................................. 108

EQUIPMENT
RANGE

LIGHT

ATTACHMENTS
ATTACHMENTS
Light Equipment Range
A growing tide of opinion says that hydraulic powerpacks make better business sense
than rival pneumatic or electric options. The combination of performance and a compact
user-friendly design has ensured that the overall efficiency, really is without comparison.
Not surprisingly, JCB is leading the way. We offer a comprehensive range of
powerpacks, breakers and tools which set the standards by which others are judged.
Thanks to their far greater efficiency, JCB Hydraulic Powerpacks can deliver equal
tool performance, using a far smaller engine than found in a typical air compressor.
Consequently, they are far more portable and fuel efficient. You can also trust them to
get through a tremendous workload, without encountering overheating problems.

99
Diesel Dumpster UPDATE
The new HTD5 is a compact, ride-on, high-tip, diesel-powered
Dumpster, designed by JCB to save you time, energy and money.

• Maximum machine width of just 706mm fits through a standard doorway

• Tip height of 1.45m, allowing you to empty into a skip or high sided vehicle
• High carrying capacity of 500kg, lets you do more in less time
• A new optional SmartStep, that enhances
operator comfort
• Two speed tracking, provides precision
and accuracy at low speeds
• Stage V 4.4kw (5.9hp) Kohler Diesel Engine
• CESAR Datatag option
• Large opening panel for easy checks,
servicing and maintenance
• New machine isolator, increasing
on-site machine security

Diesel Dumpster Specification

Maximum engine power kW (hp) 4.4 (5.9)
Maximum carry capacity kg (lb) 500 (1102)
Machine weight without step kg (lb) 515 (1135)
Machine weight with step kg (lb) 590 (1300)
Maximum machine load without step kg (lb) 1,015 (2,238)
Maximum machine load with step kg (lb) 1,090 (2,403)
Maximum machine width mm (ft-in) 706 (2-4)
Overall height (transport position) mm (ft-in) 1106 (3-6)
Minimum Skip height (transport position) mm (ft-in) 780 (2-6)
Maximum height (tipping position) mm (ft-in) 2720 (8-9)
Skip ground clearance (tipping position) mm (ft-in) 1450 (4-8)
Two speed tracking maximum speed kph 3
Fuel tank capacity litres (in³) 4.3 (262)

Specification
Part number Region
Model Hour meter
980/D2101 UK Step Included
980/D2300 UK Crashbar Included
980/D2308 UK Crashbar Not Included
980/D2103 Export Step Included
980/D2302 Export Crashbar Included
980/D2306 Export Crashbar Not Included

100
 LIGHT EQUIPMENT

Electric Dumpster NEW

The new HTD-5E is the industry’s first high volume, fully electric Dumpster,
with zero emissions at the point of use. It offers all the benefits of the traditional
diesel equivalent, with both walk-behind and ride-along capabilities.

• A new optional SmartStep that enhances operator comfort

• Low noise levels, making it suitable for urban areas plus indoor and out-of-hours working
• Operator station noise is reduced by 14dB
compared to the diesel model
• Hour meter fitted in all electric machines
• Charge times of just 73* minutes
from any 230v outlay
• 3 charging cable options:
110v / 230v / 3 pin domestic
• Lithium-ion batteries allow
power for 3-4** hours

Electric Dumpster Specification

Continuous power kW 4.5
Battery capacity kWh 4.9
Maximum carry capacity kg (lb) 500 (1102)
Machine weight without step kg (lb) 566 (1248)
Machine weight with step kg (lb) 606 (1336)
Maximum machine load without step kg (lb) 1066 (2350)
Maximum machine load with step kg (lb) 1106 (2438)
Maximum machine width mm (ft-in) 706 (2-4)
Overall height (transport position) mm (ft-in) 1106 (3-6)
Minimum Skip height (transport position) mm (ft-in) 780 (2-6)
Maximum height (tipping position) mm (ft-in) 2720 (8-9)
Skip ground clearance (tipping position) mm (ft-in) 1450 (4-8)
Two speed tracking maximum speed kph 3

Specification
Part number Region
Model Charging lead
980/E7000 UK and Ireland Crashbar UK Domestic
980/E7001 UK and Ireland Crashbar Global 110V Industrial
980/E7002 UK and Ireland Crashbar Global 230V Industrial
980/E7003 UK and Ireland Step UK Domestic
980/E7004 UK and Ireland Step Global 110V Industrial
980/E7005 UK and Ireland Step Global 230V Industrial
*Charge times measured from 20-80% (Industry Standard).
**Illustrative example basted on testing. Running time can vary depending on the environmental conditions and type of application.

101
Universal Fast Charger and Charge Guard
The Fast Charger is compatible with JCB’s 100% electric, zero emissions
E-TECH machine range, except the electric Dumpster, Teletruk and Access
Platforms, which charge through the standard JCB Genuine OEM charge leads.

• Lithium-ion ready
• 3 phase power supply
• Lifting hooks and handles
for manoeuvrability
• Supplied with a 2.5m charge
cable which plugs directly
into the machine

MACHINE CHARGING TIMES WITH FAST CHARGER (0-100%)

1TE Site Dumper 32A @ 415V 1 hour 40 minutes
525-60E Loadall 32A @ 415V 1 hour 50 minutes
19C-1E Mini Excavator 32A @ 415V 2 hours 30 minutes

Part number Region Weight (kg/lb)

Universal fast charger 401/W1618 ROW 57 (126)
Universal fast charger 401/W1619 USA* 57 (126)
Charge guard 401/X4630 Global 144 (317)
Power supply 3 Phase 32A @ 415V (18kW)**

*USA variant does not come with plugs. **Machines must be fast charge ready.

102
 LIGHT EQUIPMENT

NEW
JCB are proud to introduce the new Charge Guard, which will increase the
security of your Universal Fast Charger and protect from on-site theft.
Whilst still being manoeuvrable, using any forked machine, the Charge Guard’s
increased mass and lockable padlock opening will enhance on-site security

• 201kg mass with Universal • Antiluce fastener for securing lid

Fast Charger fitted • Standard Euro Pallet Dimensions -
• Power assisted lid for easy access 1200mm x 800mm
• Lockable for enhanced customer security
• Compatible with standard and
oversize pallet trucks

Static dimensions
Universal Fast Charger Width mm (in) 406 (16)
Universal Fast Charger Height mm (in) 875 (34.5)
Universal Fast Charger Depth mm (in) 401 (15.8)
Charge Guard Full height mm (in) 1214 (47.8)
Charge Guard Height mm (in) 1001 (39.5)
Charge Guard Width mm (in) 572 (22.5)
Charge Guard Full width mm (in) 1200 (47.2)
Charge Guard Height of base mm (in) 128 (5)
Charge Guard Depth mm (in) 549 (21.6)
Charge Guard Full depth mm (in) 800 (31.5)
Charge Guard Front fork pocket width mm (in) 350 (13.7)
Charge Guard Front fork pocket height mm (in) 97 (3.8)
Charge Guard Front fork pocket centres mm (in) 520 (20.5)
Charge Guard Side fork pocket width mm (in) 215 (8.5)
Charge Guard Side fork pocket height mm (in) 97 (3.8)
Charge Guard Side fork pocket centres mm (in) 385 (15)

103
Powerpacks
A powerful and robust Powerpack yet still lightweight, ideally suited to the rigours
of the rental market, this is the most popular Powerpack in the JCB range.
Also available with diesel engine.

• Unique suction circuit eliminates pulsation damage to cooler

• Lift up handle makes portability second to none
• Power-on-demand system that reduces off
load engine speed to idle, giving reduced
noise levels, less engine wear and lower
fuel consumption
• Integral hose track prevents
damage to hoses
• Swing open frame provides
excellent maintenance access
to engine and hydraulics
• Adjustable hydraulic flow gives
precision control of tools

Model name Beaver Trojan (30 lpm)

Part number 929/16400 929/32400
Engine Honda GX240 Honda GX390
Fuel Petrol Petrol
Power hp 8 13
EHTMA category C D
Hydraulic flow l/min 0 - 20 30
Max pressure bar 138 138
Weight kg 66 93
Height x width x length mm 615 x 530 x 720 735 x 590 x 810
Hydraulic oil capacity l 5 7
Fuel capacity l 6 6.8
Main hoses m 7 7

104
 LIGHT EQUIPMENT

Handheld Breakers
Pound for pound, blow for blow, the JCB range of breakers is the best for demolition
and breaking work. They’ll power their way through most jobs. Thanks to their
excellent power-to-weight ratio, our breakers will give amongst the best performance
of any type of breaker in their class.

• Vibro damped handles give amongst the lowest

vibration levels of any equivalent breaker
• Sealed hydraulic system, resulting in low
noise (no exhaust port) and elimination of
freezing problems
• Very robust, cast steel construction
for maximum strength and durability
• High reliability and long service life, thanks
to only having two moving parts and
constant lubrication by hydraulic oil

Model name HM22 HM25 HM25LV HM29

929/92600 25mm chisel 929/92700 20l/min
Part number 929/92400 929/A6000
929/92500 22mm chisel 929/92900 30 l/min
Weight kg 21 26 27 29
Tool / chisel size hex mm 22 or 25 32 32 32
Hydraulic flow l/min 15 - 22 18 - 22 18 - 22 18 - 22 or 28 - 32
Pressure range bar 50 - 65 90 - 110 90 - 110 90 - 110
Blow frequency blows/min 1500 1500 1500 1500
Vibration (BS8622-5) m/s² 3.4 4 1.6 5
Sound power level dB Lwa 106 108 108 108

Compatibility Table

HM22 - 929/92500 HM25 - 929/92400 HM29 - 929/2700 HM29 30ltr - 929/92900

HM22 - 929/92600 HM25LV - 929/A2613

BEAVER

TROJAN 30 ltr

105
Trash Pumps
Rugged, durable range of submersible trash pumps, used for pumping water with mud,
leaves, twigs, sand, sewage and sludge in. Used to handle matter that would clog most
other pumps. Available in two different flow ranges - 20 and 30 litre.

• Greater lift height than suction pumps

• Self priming and run dry
• Unique combi sealed –
protects main pump seal
• 5000hrs sealed bearings –
minimal maintenance required
• Removable wear plate –
protects pump housing

Model name Trash pump Trash pump

Part number 980/A4874 980/A4869
Intake port mm 102 102
Discharge port BSP Male mm 100 100
Hyd. flow range l/min 0 - 20 0 - 30
Maximum discharge l/min 2160 2640
Maximum head m 10.5 15
Operating pressure bar 138 138
Weight kg 32 32
Width x height mm 482 x 511 482 x 511
EHTMA class C C

Compatibility Table

4" TRASH PUMP 20 ltr - 980/A4874 4" TRASH PUMP 30 ltr - 980/A4869

BEAVER

TROJAN 30 ltr

106
 LIGHT EQUIPMENT

Submersible Pumps
JCB offer two types of clear water submersible pump to suit two different hydraulic flow
Powerpacks. They are self priming with high power-to-weight ratio. Being hydraulically
driven, they are self lubricating and maintenance free and will run dry without damage.

• Flat faced quick-release dripless couplings

for speed of attachment change
• Lifting eye to aid placement
• Self priming for speed of use
• Supplied with 10m x2in lay flat hose
• Capable of pumping solids in suspension
up to 8mm (6/10in) diameter for
extra versatility

Model name Submersible pump Submersible pump

Part number 929/03900 929/04500
Discharge port BSP Male mm 50 50
Hyd. flow range l/min 0 - 22 0 - 32
Maximum discharge l/min 700 820
Maximum head m 18 18
Operating pressure bar 138 138
Weight kg 8.2 8.5
Width x height mm 230 x 302 230 x 302
EHTMA class C C

Compatibility Table

4" SUB PUMP 20 ltr - 929/03900 4" SUB PUMP 30 ltr - 929/04500

BEAVER

TROJAN 30 ltr

107
Earth Drill
JCB hand held Earth Drills are capable of drilling holes from 102mm (4in) up to
305mm (12in) in diameter, depending on the size of the auger flight fitted. Thanks to
its hydraulic drive, this unit has more torque than most petrol engine units, making it
strictly a two-man operation.

• Automatic return to neutral safety device

• Reversible for powering out of ground
• Diameter hole capacity from 102 to 305mm

Optional Items
• Various diameter auger flights
• Fittings, couplings, adapters
• Extension flights

Model name Earth drill

Part number 929/13400
Capacity mm 305
Hole depth mm 1220
Auger flights mm 100, 150, 200, 250, 305
Torque Nm 295
RPM l/min 136 @ 20
Weight kg 15
Height mm 1295
Max. pressure bar 138
Optimal flow l/min 15 - 23 Class C

Compatibility Table

EARTH DRILL - 929/13400

BEAVER

TROJAN 30 ltr

108
MATERIAL WEIGHTS

ATTACHMENTS
MATERIAL
WEIGHTS
ATTACHMENTS
Material Weights
Material kg/m³ Fill factor %
Apples 525 85
Ashes 604 85
Barley 600 85
Beet pulp (nuts) 604 100
Beet pulp (pressed) 906 110
Brewer's grain 1110 85
Brick aggregate 1828 100
Carrots 636 100
Cement (natural) 874 100
Cement (Portland) 1440 100
Chalk 795 100
Clay (fire) 2080 100
Clay (wet) 1680 110
Coal (anthracite) 1046 100
Coal (bitumous) 765 100
Coke (loose) 570 85
Earth (dry) 1150 100
Fertiliser (mixed) 1030 85
Flour 445 85
Gravel (dry) 1650 85
Hay (normal density bale) 190 110
Lime (quick) 881 100
Limestone (crushed) 1530 100
Manure (farmyard) 922 85
Nitrate Fertiliser 1250 85
Oats 415 85
Onions 556 85
Peat (dry) 400 100
Petroleum coke 680 85
Potatoes 699 85
Refuse (town) 318 100
Rubble 1047 100
Sand (dry) 1550 100
Sand (wet) 1890 110
Sawdust 238 110
Silage (ensile) 747 110
Silage (green) 349 110
Slurry 1780 85
Snow (fresh) 200 110
Snow (wet) 400 110
Sodium chloride (dry salt) 1300 86
Straw (high density bale) 254 110
Sugar beet 530 100
Turnips 540 100
Wheat 730 85

111
Notes

112
Notes

113
 ATTACHMENTS

JCB Sales Limited, Rocester, Staffordshire, United Kingdom ST14 5JP

Tel: +44 (0)1889 590312 Email: [email protected]
Download the very latest information on this product range at: www.jcb.com

JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories.
The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5805 en-GB 03/23 Issue 11