http://www.ncepower.

com NCEP1520K
NCE N-Channel Super Trench Power MOSFET
Description
The NCEP1520K uses Super Trench technology that is
uniquely optimized to provide the most efficient high
frequency switching performance. Both conduction and
switching power losses are minimized due to an extremely
low combination of RDS(ON) and Qg. This device is ideal for
high-frequency switching and synchronous rectification.
Schematic diagram
General Features
● VDS =150V,ID =20A
RDS(ON)=59mΩ (typical) @ VGS=10V
● Excellent gate charge x RDS(on) product(FOM)
● Very low on-resistance RDS(on)
● 175 °C operating temperature
● Pb-free lead plating
● 100% UIS tested
Marking and pin assignment

Application
● LED backlighting
● Ideal for high-frequency switching and synchronous
rectification
100% UIS TESTED!
TO-252 -2Ltop view

Package Marking and Ordering Information

Device Marking Device Device Package Reel Size Tape width Quantity
NCEP1520K NCEP1520K TO-252-2L Ø330mm 12mm 2500 units

Absolute Maximum Ratings (TA=25℃unless otherwise noted)

Parameter Symbol Limit Unit
Drain-Source Voltage VDS 150 V
Gate-Source Voltage VGS ±20 V
Drain Current-Continuous ID 20 A
Drain Current-Continuous(TC=100℃) ID (100℃) 14 A
Pulsed Drain Current IDM 80 A
Maximum Power Dissipation PD 68 W
Derating factor 0.45 W/℃
(Note 5)
Single pulse avalanche energy EAS 65 mJ
Drain Source voltage slope, VDS ≤120 V, dv/dt 50 V/ns
Drain Source voltage slope, VDS ≤120 V, ISD<ID dv/dt 50 V/ns
Operating Junction and Storage Temperature Range TJ,TSTG -55 To 175 ℃

Wuxi NCE Power Co., Ltd Page 1 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K
Thermal Characteristic
Thermal Résistance, Junction-to-Case(Note 2) RθJC 2.2 ℃/W
Electrical Characteristics (TA=25℃unless otherwise noted)
Parameter Symbol Condition Min Typ Max Unit
Off Characteristics
Drain-Source Breakdown Voltage BVDSS VGS=0V ID=250μA 150 - - V
Zero Gate Voltage Drain Current IDSS VDS=150V,VGS=0V - - 1 μA
Gate-Body Leakage Current IGSS VGS=±20V,VDS=0V - - ±100 nA
(Note 3)
On Characteristics
Gate Threshold Voltage VGS(th) VDS=VGS,ID=250μA 2.5 3.3 4.5 V
Drain-Source On-State Resistance RDS(ON) VGS=10V, ID=10A - 59 65 mΩ
Gate resistance RG - 4.5 - Ω
Forward Transconductance gFS VDS=5V,ID=10A 15 - - S
(Note4)
Dynamic Characteristics
Input Capacitance Clss - 600 PF
VDS=75V,VGS=0V,
Output Capacitance Coss - 74.7 PF
F=1.0MHz
Reverse Transfer Capacitance Crss - 10.8 PF
(Note 4)
Switching Characteristics
Turn-on Delay Time td(on) - 9.5 - nS
Turn-on Rise Time tr VDD=75V, RL=7.5Ω - 5.5 - nS
Turn-Off Delay Time td(off) VGS=10V,RG=3Ω - 12.5 - nS
Turn-Off Fall Time tf - 3 - nS
Total Gate Charge Qg - 12 - nC
VDS=75V,ID=10A,
Gate-Source Charge Qgs - 5.7 - nC
VGS=10V
Gate-Drain Charge Qgd - 2.7 - nC
Drain-Source Diode Characteristics
Diode Forward Voltage (Note 3) VSD VGS=0V,IS=10A - - 1.2 V
(Note 2)
Diode Forward Current IS - - 20 A
Reverse Recovery Time trr TJ = 25°C, IF = IS - 29 - nS
(Note3)
Reverse Recovery Charge Qrr di/dt = 100A/μs - 130 - nC

Notes:
1. Repetitive Rating: Pulse width limited by maximum junction temperature.
2. Surface Mounted on FR4 Board, t ≤ 10 sec.
3. Pulse Test: Pulse Width ≤ 300μs, Duty Cycle ≤ 2%.
4. Guaranteed by design, not subject to production
5. EAS condition : Tj=25℃,VDD=50V,VG=10V,L=0.5mH,Rg=25Ω

Wuxi NCE Power Co., Ltd Page 2 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K

Test Circuit
1) EAS test Circuit

2) Gate charge test Circuit

3) Switch Time Test Circuit

Wuxi NCE Power Co., Ltd Page 3 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K
Typical Electrical and Thermal Characteristics

Normalized On-Resistance
ID- Drain Current (A)

Vds Drain-Source Voltage (V) TJ-Junction Temperature(℃)

Figure 1 Output Characteristics Figure 4 Rdson-Junction Temperature

Vgs Gate-Source Voltage (V)

ID- Drain Current (A)

Vgs Gate-Source Voltage (V) Qg Gate Charge (nC)

Figure 2 Transfer Characteristics Figure 5 Gate Charge
Rdson On-Resistance(mΩ)

Is- Reverse Drain Current (A)

ID- Drain Current (A) Vsd Source-Drain Voltage (V)

Figure 3 Rdson- Drain Current Figure 6 Source- Drain Diode Forward

Wuxi NCE Power Co., Ltd Page 4 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K
C Capacitance (pF)

Power Dissipation (W)

Vds Drain-Source Voltage (V) TJ-Junction Temperature(℃)
Figure 7 Capacitance vs Vds Figure 9 Power De-rating
ID- Drain Current (A)
ID- Drain Current (A)

Vds Drain-Source Voltage (V) TJ-Junction Temperature(℃)

Figure 8 Safe Operation Area Figure 10 Current De-rating
Transient Thermal Impedance
r(t),Normalized Effective

Square Wave Pluse Duration(sec)

Figure 11 Normalized Maximum Transient Thermal Impedance

Wuxi NCE Power Co., Ltd Page 5 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K
TO-252-2L Package Information

Wuxi NCE Power Co., Ltd Page 6 V1.3

Downloaded From Oneyac.com

 http://www.ncepower.com NCEP1520K
Attention:

■ Any and all NCE power products described or contained herein do not have specifications that can handle applications that
require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications
whose failure can be reasonably expected to result in serious physical and/or material damage. Consult
with your NCE power representative nearest you before using any NCE power products described or contained herein in
such applications.
■ NCE power assumes no responsibility for equipment failures that result from using products at values
that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters)
listed in products specifications of any and all NCE power products described or contained herein.
■ Specifications of any and all NCE power products described or contained herein stipulate the performance, characteristics,
and functions of the described products in the independent state, and are not guarantees of the performance, characteristics,
and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states
that cannot be evaluated in an independent device, the customer should always evaluate and test
devices mounted in the customer’s products or equipment.
■ NCE power Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could
cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or
events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe
design, redundant design, and structural design.
■ In the event that any or all NCE power products(including technical data, services) described or contained herein are
controlled under any of applicable local export control laws and regulations, such products must not be exported without
obtaining the export license from the authorities concerned in accordance with the above law.
■ No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission
of NCE power Semiconductor CO.,LTD.
■ Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume
production. NCE power believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
■ Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE power
product that you intend to use.
■ This catalog provides information as of Sep.2010. Specifications and information herein are subject to change without notice.

Wuxi NCE Power Co., Ltd Page 7 V1.3

Downloaded From Oneyac.com

 单击下面可查看定价，库存，交付和生命周期等信息

>>NCEPOWER(无锡新洁能)

Downloaded From Oneyac.com