IS:4984-2016

CMLNO
5400067912

HIGH DENSITY
P O LY E T H Y L E N E P I P E S
For Portable Water and Fluid Applications

www.skipperpipes.in
 HIGH DENSITY POLY ETHYLENE PIPING SYSTEM
Foreword
Skipper HDPE Pipes are safe durable and cost effective solution for various
application. Strength tests on raw material & finished goods assists to provide
the quality as per standard IS:4984-2016.

Key Features
• Excellent resistance to Corrosion, Abrasion & Chemical.
• High Ductility & Toughness.
• Excellent resistance to Water Hammers.
• Excellent Weldability.
• Low Installation Cost.
• Durable & Cost Effective.
• High flow characteristics.
• Minimum friction loss.

Product Range
• Size: 20 MM to 400 MM
• Pressure Class: SDR 41 to SDR 6 (PN2 to PN20)
• Grades: PE63, PE80, PE100.

Application
• Distribution mains line & house connections for water supply.
• Bore well installations with submersible pumps for water supply.
• Coal handling in mines.
• Chemical lines & other Industrial application.
• Agriculture & Lift Irrigation.
• Under water pipelines & Desalination plants.
Dimension Details as per IS 4984 : 2016
SDR SDR 41 SDR 33 SDR 26 SDR 21 SDR 17 SDR 13.6 SDR 11 SDR 9 SDR 7.4 SDR 6
Nominal Pressure (PN) Bar
PE 63 PN 2 PN 2.5 PN 3.2 PN 4 PN 5 PN 6 PN 8 -
PE 80 PN 2.5 PN 3.2 PN 4 PN 5 PN 6 PN 8 PN 10 PN 12.5 PN 16 PN 20
PE 100 PN 3 PN 4 PN 5 PN 6 PN 8 PN 10 PN 12.5 PN 16 PN 20
Nominal Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
OD mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
16 1.8 2.1 2.2 2.5 2.7 3.1
20 1.9 2.2 2.3 2.6 2.7 3.1 3.4 3.8
25 1.9 2.2 2.3 2.6 2.8 3.2 3.4 3.8 4.2 4.7
32 1.9 2.2 2.4 2.7 2.9 3.3 3.6 4.1 4.4 4.9 5.4 6.0
40 1.9 2.2 2.4 2.7 3.0 3.4 3.7 4.2 4.5 5.1 5.4 6.0 6.7 7.5
50 2.0 2.3 2.4 2.7 3.0 3.4 3.7 4.2 4.6 5.2 5.6 6.3 6.8 7.6 8.4 9.3
63 2.5 2.9 3.0 3.4 3.7 4.2 4.7 5.3 5.8 6.5 7.0 7.8 8.6 9.6 10.5 11.7
75 1.9 2.2 2.3 2.6 2.9 3.3 3.6 4.1 4.5 5.1 5.6 6.3 6.9 7.7 8.4 9.3 10.2 11.3 12.5 13.9
90 2.2 2.5 2.8 3.2 3.5 4.0 4.3 4.8 5.3 5.9 6.7 7.5 8.2 9.1 10.0 11.1 12.2 13.5 15.0 16.6
110 2.7 3.1 3.4 3.8 4.3 4.8 5.3 6.0 6.5 7.3 8.1 9.0 10.0 11.1 12.3 13.6 14.9 16.5 18.4 20.3
125 3.1 3.5 3.8 4.3 4.8 5.4 6.0 6.7 7.4 8.2 9.2 10.2 11.4 12.7 13.9 15.4 16.9 18.7 20.9 23.1
140 3.5 4.0 4.3 4.8 5.4 6.0 6.7 7.5 8.3 9.2 10.3 11.4 12.8 14.2 15.6 17.3 19.0 21.0 23.4 25.8
160 3.9 4.4 4.9 5.5 6.2 6.9 7.7 8.6 9.5 10.6 11.8 13.1 14.6 16.2 17.8 19.7 21.7 24.0 26.7 29.5
180 4.4 4.9 5.5 6.2 7.0 7.8 8.6 9.6 10.6 11.8 13.3 14.7 16.4 18.1 20.0 22.1 24.4 26.9 30.0 33.1
200 4.9 5.5 6.1 6.8 7.7 8.6 9.6 10.7 11.8 13.1 14.7 16.3 18.2 20.1 22.3 24.6 27.1 29.9 33.4 36.8
225 5.5 6.2 6.9 7.7 8.7 9.7 10.8 12.0 13.3 14.7 16.6 18.4 20.5 22.7 25.0 27.6 30.5 33.7 37.5 41.4
250 6.1 6.8 7.6 8.5 9.7 10.8 12.0 13.3 14.7 16.3 18.4 20.3 22.8 25.2 27.8 30.7 33.8 37.3 41.7 46.0
280 6.9 7.7 8.5 9.5 10.8 12.0 13.4 14.8 16.5 18.3 20.6 22.8 25.5 28.2 31.2 34.4 37.9 41.8 46.7 51.5
315 7.7 8.6 9.6 10.7 12.2 13.5 15.0 16.6 18.6 20.6 23.2 25.6 28.7 31.7 35.0 38.6 42.6 47.0 52.5 57.9
355 8.7 9.7 10.8 12.0 13.7 15.2 16.9 18.7 20.9 23.1 26.1 28.8 32.3 35.6 39.5 43.6 48.0 52.9 59.2 65.2
400 9.8 10.9 12.2 13.5 15.4 17.0 19.1 21.1 23.6 26.1 29.5 32.6 36.4 40.1 44.5 49.1 54.1 59.6 66.7 73.5

Availability

Length(mtr.)
Size(mm)
Coil Form Straight Length
20-50 100,200,300,500 & 1000 -
63-75 100, 200 & 300 6 to 12
90-110 50, 100 6to 12
125-400 - 6to 12
Jointing Techniques
Procedure
In Butt Welding, fusion areas (ends of pipes or fittings) are heated under controlled pressure.
a) Cleaning of Pipes, Tools & Heating plates.
b) Clamp & Adjust the pipe or piping part.
c) Assemble the clamp & the same time check alignment of pipe.
d) Set & ensure heating plate temperature at 200˚ to 220˚C. Position the heating plate in butt
welding machine, after attaining fusion temperature.
e) Pipe or fitting surfaces to be pressed against the heating element with the required force
until entire circumference of each of the joining faces rests completely against it & a bead
is formed.
f) Push the heated pipe ends together after heating immediately with pressure to form joint.
g) Allow pipes with joints to be cooled for some time.
Note: Above information is true & right as per our belief & knowledge, though any error occurred, Skipper is not liable. Any of the information specification
could be modified & changed without any prior information.

Complete range of PVC Pipes & Bath Fittings

CPVC | UPVC | SWR | UGD | HDPE | BOREWELL | AGRICULTURE
CISTERN | SEAT COVER | BATH FITTINGS
Toll Free:1800 120 6842

SKIPPER LIMITED
3A, Loudon Street, Kolkata-700017, West Bengal, India
PH.: 90512 12345 | Email:[email protected] | www.skipperlimited.com

WORKS
Guwahati (Assam) | Uluberia (West Bengal)