Senior Corrosion Technologist
● C) The mass loss due to corrosion over time
● D) The chemical composition of the metal
Answer: B) The voltage difference between the metal and its environment
Explanation: Corrosion potential is the potential difference between the metal and the
electrolyte, which drives the corrosion process.
219. Which of the following materials is most cathodic in the galvanic series?
● A) Zinc
● B) Magnesium
● C) Platinum
● D) Iron
Answer: C) Platinum
Explanation: Platinum is one of the most cathodic (noble) metals in the galvanic series,
meaning it is less likely to corrode.
220. What is the purpose of using a "polarization cell replacement" in a
cathodic protection system?
● A) To increase the current output of the anodes
● B) To protect the structure from AC interference
● C) To replace the anode material without stopping the system
● D) To monitor the level of polarization of the structure
Answer: B) To protect the structure from AC interference
Explanation: Polarization cell replacements are used in cathodic protection systems to
mitigate the effects of AC interference, which can cause additional corrosion or safety issues.
221. What is a common indicator that an impressed current cathodic
protection system is underperforming?
● A) Increased pH levels around the anodes
● B) Reduced current output from the rectifier
● C) A negative shift in the structure's potential
● D) Excessive anode consumption
Answer: B) Reduced current output from the rectifier
Explanation: If the rectifier in an impressed current system is not outputting sufficient
current, the system may underperform, leading to inadequate protection.
222. What is the most common cause of stray current corrosion?
Page 59
