CSAT-5060 & CSAT-6070 C-Band Transceivers

Transceivers

5 to 25 W P1db 5 to 25 W P1db 5 to 25 W P1db

(6 to 32 W Psat) (6 to 32 W Psat) (6 to 32 W Psat)

Introduction Typical Users

The CSAT-5060 and CSAT-6070 C-Band Transceivers provide superior performance, long-term • Cellular Providers
reliability, and ease of installation. A very price-competitive product, these transceivers embody the • Maritime
best design efforts of our highly experienced RF engineering team.
• Oil & Gas
Full Rated Power Common Applications
The CSAT-5060 and CSAT-6070 deliver the full rated power, or more, measured at the 1 dB • VSAT point-to-point
compression point and at the output flange. You will know the useable output power you are paying applications – TDMA, DAMA,
for, and receive full value for your investment. SCPC/MCPC
Phase Noise
The dual synthesizers in this family of transceivers deliver superior phase noise performance, exceeding Intelsat specifications by a
substantial margin. Your applications will benefit from outstanding spectral purity and the ability to operate in multi-carrier environments
with less worry.
Third Order Intercept (TOI)
The design provides a high TOI that allows multi-carrier applications without the issues normally encountered in low power
environments. The CSAT-5060 and CSAT-6070 deliver performance usually found only in split converter SSPA systems.
Small, Compact Design
The transceivers are enclosed in a single unit chassis. This design allows quick, easy installation for all models in this family of
transceivers.
Full Monitor and Control (M&C)
A variety of full monitor and control methods are designed into the CSAT-5060 and CSAT-6070:
• Convenient connection using an optional small, hand-held terminal
• Easy access via EIA-232 or EIA-485 connections
• Remote management via the CDM modem family or the PC-based SatMac proprietary M&C software
Redundancy
The CSAT-5060 and CSAT-6070 are available in 1:1 redundant configurations.
10 dBm Option
This transceiver is designed to mate with an external high power SSPA (Example: Comtech EF Data HPODs) or TWTA to provide even
higher output power.

www.comtechefdata.com
Specifications
Transmit Common
Frequency RF Conversion Dual, no spectral inversion
CSAT-5060 5845 to 6425 MHz Standard Frequency Step Size 1.0 and 2.5 MHz automatic
-9
6425 to 6725 MHz (Optional Extended) Frequency Stability 1x10 /day
-7
5850 to 6650 MHz (Optional Wide) 1x10 /year
-8
5845 to 6725 MHz (Optional Super Wide) 40º to +55ºC 1x10 /Temperature
CSAT-6070 6725 to 7025 MHz Attenuation Steps TX: 0 to 25 dB in 0.25 dB steps
Frequency IF 70 MHz ± 18 MHz RX: 0 to 20 dB in 0.25 dB steps
140 MHz ± 36 MHz (Optional) Phase Noise 100 Hz -66 dBc/Hz
Output Power CSAT-5060 CSAT-6070 1 kHz -76 dBc/Hz
P1dB P1dB Psat Typical 10 kHz -86 dBc/Hz
10 dBm 10 dBm 100 kHz -96 dBc/Hz
5W 5 W (37dBm) 5 W (37dBm) 38 dBm (6 W) Group Delay Linear 0.1 ns/MHz
10 W 10 W (40 dBm) 10 W (40 dBm) 41 dBm (12 W) Parabolic 0.02 ns/MHz2
20 W 20 W (43 dBm) 20 W (43 dBm) 43.8 dBm (24 W) Ripple 1 ns p-p
25 W 25 W (44 dBm) 25 W (44 dBm) 45 dBm (32 W)
50 W 50 W (47 dBm) 50 W (47 dBm) 48 dBm (63 W)
100 W 100 W (50 dBm) 100 W (50 dBm) 51 dBm (125 W) Monitor & Control
125 W 125 W (51 dBm) 51.8 dBm (150 W) Methods Both RS-485 and RS-232 Serial Interface
Gain Handheld controller, optional
10 dBm 25 dB Commands Set TX frequency
5W 65 dB Set RX frequency
10 W 68 dB Set TX attenuation
20 W 71 dB Set RX attenuation
25 W 71 dB Report TX output power
50 W 74 dB Mute TX
100 & 125 W 77 dB Report internal temperature
Report power supply voltages
Attenuator Range 25 dB in 0.25 dB steps
Set time
Gain Flatness ± 0.75 dB full RF band
Set date
± 0.75 dB per 36 MHz
Faults Up converter functions
Gain Stability ± 0.25 dB at constant C
Down converter functions
± 1.00 dB from -40º to +55ºC (-40º to 131ºF)
Up converter synthesizers
Carrier Mute -70 dBc Down converter synthesizers
Inter-Modulation -28 dBc typical for two carriers each at 6 dB Internal reference oscillator
OPBO from rated power (3 dB total OPBO) LNA current fault
Second Harmonic -55 dBc Over temperature condition
Spurious AC line harmonics -45 dBc
Carrier related, <500 kHz -60 dBc
All other in-band -65 dBc Environmental
AM to PM Conversion 3.0 Degrees at 6 dB Operating Temperature -40º to +55ºC (-40º to 131ºF) Operating
OPBO from rated power Storage Temperature -50º to +75ºC (-58º to 167ºF) Storage
RF Output VSWR 1.25:1 Altitude 15,000 ft, mean sea level
RF Output Connector Humidity 0 to 100 Percent, Relative
10 dBm, 5 W, 10 W, 20 W, 25 Type N female Ingress Protection Designed for IP-66 (Dust tight, strong water jets)
W, 50 W, 100 W & 125 W CPR-137G Prime Power 90 to 260 VAC standard
IF Input Impedance 50 Ω 47 to 63 Hz standard
IF Input VSWR 1.25:1 48 VDC optional
IF Input Connector Type N female Dimensions (nominal) (height x width x depth)
10 dBm 8” x 8” x 11”
(20 x 20 x 28 cm)
Receive 10 W to 25 W
Frequency RF 10.75” x 8” x 11”
CSAT-5060 Converter 3400 to 4200 MHz (27.3 x 20 x 28 cm)
LNA 3400 to 4200 MHz(std.) 50 W
3625 to 4200 MHz (Optional) 9.75” x 10” x 23”
CSAT-6070 4500 to 4800 MHz (24.77 x 25.4 x 58.42 cm)
Frequency IF 70 MHz ±18 MHz 100 W & 125 W
140 MHz ± 36 MHz (Optional) 10” x 12.5” x 26”
Gain, without LNA 45 dB (25.4 x 31.75 x 66.04 cm)
Gain Flatness, without LNA ± 0.75 dB full RF band Weight
± 0.75 dB per 36 MHz 5 W to 25 W 36 lbs (16 kg)
Gain Stability, without LNA ± 0.25 dB constant temperature 50 W 65 lbs (29 kg)
± 1.00 dB -40º to +55ºC (-40º to 131ºF) 100 & 125 W 80 lbs (40 kg)
Output Power, P1dB +13 dBm
Two Tone Inter-Modulation -50 dBc for two tones at 0 dBm each, Low Noise Amplifier Customer defined
1 MHz apart RF Power
Image Rejection -60 dBc CSAT-5060 10 dBm, 5 W, 10 W, 20 W, 25 W, 50 W, 100 W, 125 W
RF Input VSWR 1.25:1 CSAT-6070 5 W, 10 W, 25 W, 50 W, 100 W
RF Input Connector Type N female AC Power
IF Output Impedance 50 Ω CSAT-5060 120 W, 150 W, 200 W, 220 W,250 W, 410 W, 759 W, 850 W
IF Output VSWR 1.25:1 CSAT-6070 150 W, 200 W,220W, 240 W, 250 W, 410 W, 759 W
IF Output Connector Type N female Steady-State True AC Power Requirement (110 VAC)

2114 West 7th Street, Tempe, Arizona 85281 USA

Voice: +1.480.333.2200 ● Fax: +1.480.333.2540 ● Email: [email protected]
See all of Comtech EF Data’s Patents and Patents Pending at http://patents.comtechefdata.com
Comtech EF Data reserves the right to change specifications of products described in this document at any time without notice and without obligation to notify any person of such changes. Information in
this document may differ from that published in other Comtech EF Data documents. Refer to the website or contact Customer Service for the latest released product information
© 2014 Comtech EF Data ds-CSAT5060_CSAT6070.docx 9/19/2014