Scribd
Upload
7 views

SOLID-BOSS-Industrial

Uploaded by

Filippo Ferrari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
7 views

SOLID-BOSS-Industrial

Uploaded by

Filippo Ferrari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SOLID BOSS Specifications

Specifications 32SB 42SB 60SB 72SB


Capacity (gpm / M3/hr) 25-75 / 5-17 45-135 / 10-30 70-210 / 16-47 100-300 / 22.5-67.5
Height (inch / mm) 80 / 2032 87 / 2210 100 / 2520 144 / 3225
Width (inch / mm) 53 / 1336 59 / 1498 65 / 1651 80 / 2032
Depth (inch / mm) 58 / 1473 66 / 1676 84 / 2134 94 / 2388
Dry Weight (lbs / kg) 2746 / 1246 3942 / 1789 5616/ 2548 7440 / 3375
Wet Weight (lbs / kg) 4145 / 1880 6341 / 2877 10514 / 4770 14200 / 6442
*Specifications are for SB only without any options. Dimensions can vary depending on options selected. Dimensions for
larger sizes vary and will be provided at time of quote.

ALL UNITS
Specifications Value Comments
99+% down to 25 micron Much finer particle size than clarifiers, skimmers
Expected Solids Removal particle size or hydrocyclone systems
Smaller % down to 1 micron
Can handle up to 50% solids No other solids removal system can handle high
Solid Concentration
for short periods concentrations of solids
< 75 micron particle size Certified systems are available that will get
Oil Removal (Option OR)
down to <5 ppm
Up to 3 times the nominal Allows higher flow during surges or upset
Surge Capacity (Option HF)
capacity conditions
Blowdown Requirements As needed Blows down to dewatering device, pond or tote
As needed Blowdown from the system pressure or by
Blowdown Discharge Pressure adding a pump. Pressure is a function of the
discharge lift requirements.
Control System Type IDEC PLC Includes 3” HMI Touch screen
Control System Interface Extra dry contacts Easy to interface with main control system
Pressure Rating Vacuum to 15 psig pressure Tested at 40 psig
Operating Temp Range (process water) 5-40 C Generally not affected by temperature
Single Phase Power Options 110 - 220vac Any 1 phase power option
Three Phase Power Options 210 - 575vac Any 3 phase power option to 575vac
Frequency 50 or 60 Hz
Area Classification NEMA 4X Class I Div I or II optional
Brannstrom standard Monitor is not supplied unless requested.
Oil Content Monitor (Optional)
Several OCM models to select from
Control Valves Electric actuated MOV or solenoid type
Solids Level Sensor Standard is a timer Tuning fork and/or density meter are available.
Oil Level Control (Part of Option OR) Conductance
Positive displacement Other types of pumps available
Blowdown Pump
standard
Positive displacement Optional as needed - > 5 psig inlet pressure
Inlet Process Pump(Option PP)
standard needed
Oil Discharge MOV valve Fill water pressure pushes oil out
Vessel Metallurgy Carbon steel 1/8” corrosion allowance
Internal Protection Anode protection Option to galvanize inside
External Protection Epoxy / urethane Skid is powder coated
Skid Included
Threaded bronze up to 2”
Piping and Manual Valves
/CS welded >2” / 304 SS Air

CONTACT:

[email protected]

You might also like