Automation / M1 Controller System / Processor Modules

MH200 - Series (High Performance)

Processor modules of the MH200 series combine m ­ aximum pro-

cessing performance with out­standing environmental robustness.
Thanks to multicore ­technology and symmetrical multi-processing
for real-time systems, the 2.3 GHz CPU is also suitable for deman-
ding applications with very high volume requirements and short
cycle times.

Specific tasks such as complex motion control, image processing

or higher-level control and ­communication tasks benefit from
the parallel processing of up to 4 tasks. Data centric applications,
such as process diagnostics, machine learning or the predictive
Item Device Item No..
­maintenance of large machine parks can be implemented easily
MH230 1) 00031521-00
thanks to the large working memory.
MH230 1) 4GB CFA 00031521-03
MH230 CC 1) 00031673-00
The generous thermal design and special coating processes enable
MH230 CC 1) 4GB CFA 00031673-03
fan-free use in extreme operating conditions from -30 to +60 °C.
MH230 00032783-00
The integrated power supply unit, which also provides the I/O
MH230 4GB CFA 00032783-03
module supply, enables the installed volume to be kept very com-
MH230 CC 00032784-00
pact.
MH230 CC 4GB CFA 00032784-03

1) Hardware revision <KR110.000: 512 kB NVRAM, 16 MB • Industrial 2.3 GHz Dual-Core-Processor

internal memory device, USB 2.0 • 4 logical Cores via Hyper-Threading
(incl. 500 mA supply), 30 W for I/O, no TPM-Chip,
• Realtime Symmetrical Multi Processing
minimum version M-Base 4.30
• 2 GB DDR4 RAM
• CFast card slot for removable media
• 2x Ethernet 10/100/1000 Mbit/s with IEEE 1588
• 1x RS232, 1x RS232/RS422/RS485
• Integrated power supply for I/Os

• Depending on the version (Engineering Part Revision):

• 512 kB or 1 MB remanent memory (Retain) 1)
• 16 MB or 2 GB internal memory device1)
• 1 x USB 2.0 or 1x USB 3.01)
• Without Trusted Platform Module (TPM) or with TPM1)

Bachmann electronic GmbH • 06/2022 • Specification subject to change – the product’s characteristics are exclusively governed by the data of the respective user manual.
 Automation / M1 Controller System / Processor Modules

MH200 Series MH230

Processor
Architecture x86 / Pentium® / IntelCore®
CPU Industrial Low Voltage
Clock frequency 2300 MHz
Processor Cores 2
Hyper-Threading Yes (4 logical cores)
Multitasking Yes
Realtime-SMP / Core reservation Yes / Yes
Memory
Main memory / partitions 2 GB DDR4 / Yes
Ramdisk Yes
Retentive memory (Retain) 1 MB NVRAM 1)
Mass storage integrated 2 GB pSLC Flash 1) , 3)
Mass storage removable CFast Type I 2) (via side cover)
Interfaces
I/O Subsystem Bachmann M1 Backplane Interface
Process Image Controller integrated
Cyclic process images and on-event single channel access
Synchronisation pulse for I/O & field busses
Ethernet 2x 10/100/1000 Base-T (RJ45)
AutoNegotiation, AutoCrossing, IEEE 1588
Serial ports / COM 1x RS232 (D-SUB-9 m)
1x RS232 / RS422 / RS485 galvanisch getrennt (D-SUB-9 m)
USB 1x USB 3.0 1) (incl. 900 mA 1) supply)
Indication & Operation
Status indications 3x LED for CPU status (RUN / INIT / ERR)
2x LED for status and link speed per ETH port
Operating elements 2x 16-position rotary switch (Hex-switch)
For operation mode, programming, boot mode, address setting etc.
Programming
Generic build target Yes, across all model families
Languages IEC 61131-3, C/C++, MATLAB®/Simulink® 4)
Functional modules Yes (MotionControl, Camming, CNC, adaptive temperature c­ ontrol ...) 4)
Monitoring
Processor temperature Yes
Processor load Yes
Runtime behaviour Yes, cycle monitoring & watchdog
Network load Yes
Memory protection Yes, per partition
Supply voltage Yes, with interrupt signal

1) Hardware revision <KR110.000: 512 kB NVRAM, 16 MB internal memory device, USB 2.0 (incl. 500 mA supply), 30 W for I/O, no TPM-Chip, minimum
version M-Base 4.30
2) Memory card not included if not mentioned explicitely in order text
3) By default 13 MB used for system software at shipping
4) May include additional costs
5) Hardware revision <KR110.000: power consumption total: 55 W, without I/O: 20 W, output to I/O: 30 W (+5 V / 3000 mA; +15 V / 500 mA; -15V / 500 mA)

For details on shock and vibration robustness, EMC robustness and interference see ­User manual M-Base.

Bachmann electronic GmbH • 06/2022 • Specification subject to change – the product’s characteristics are exclusively governed by the data of the respective user manual.
Automation / M1 Controller System / Processor Modules

MH200 Series MH230

Subsystems
Real time clock Yes (recharchable battery buffered RTC for time/date),
sync capability over IEEE 1588, SNTP
Trusted platform module Yes (TPM 2.0) 1)
Energy Supply
Supply voltage 24 VDC (18 to 34 V)
Connector terminal for socket KZ 51/03 RM 5.08; 3-pol.
Polarity reversal protection Yes
Isolation of supply Yes
Voltage interruptions immunity PS2
(IEC 61131-2)
Rated power consumption without I/O 22 W 5) (no supply via NT255 possible)
Rated power consumption with I/O 63 W 5)
Rated power output for I/O 36 W 5)
Maximum currents for I/O +5 V / 4200 mA 5) ; +15 V / 500 mA; -15V / 500 mA
Electrical Safety
Protection class (DIN EN 61140) III
Protection type (IEC 60529) IP20
Environmental Conditions Standard ColdClimate ( )
Operating temperature -30 to +60 °C fanless
Relative air humidity, operation 5 to 95 % without condensation 5 to 95 % with condensation
Storage temperature -40 to +85 °C
Relative air humidity, storage 5 to 95 % without condensation 5 to 95 % with condensation
Maximum operating altitude 2000 m above sea level (with derating up to 4500 m)
Pollution degree (IEC 60664-1) 2 (without condensation) 2
Approvals/Certificates
Product safety CE, cULus, CCC
Maritime DNV, LR, ABS, BV, NK, KR, RINA
Dimensions
Number of slots / module units 4
Width x Height x Depth 220 x 119 x 96 mm
Weight / Mass Approx. 1835 g
System Requirements
Backplane BS2xx, BS2xx/S, BS2xx/E
Software MHOS (VxWorks 7) from M-Base 4.39 1) or higher (pre installed on internal
memory device), for application development ToolChain from V4.31 or higher is
recommended (to utilize MultiCore/SMP)

1) Hardware revision <KR110.000: 512 kB NVRAM, 16 MB internal memory device, USB 2.0
(incl. 500 mA supply), 30 W for I/O, no TPM-Chip, minimum version M-Base 4.30
2) Memory card not included if not mentioned explicitely in order text
3) By default 13 MB used for system software at shipping
4) May include additional costs
5) Hardware revision <KR110.000: power consumption total: 55 W, without I/O: 20 W,
output to I/O: 30 W (+5 V / 3000 mA; +15 V / 500 mA; -15V / 500 mA)

For details on shock and vibration robustness, EMC robustness and interference see ­User manual M-Base.

Bachmann electronic GmbH • 06/2022 • Specification subject to change – the product’s characteristics are exclusively governed by the data of the respective user manual.
 Automation / M1 Controller System / Processor Modules

Order Codes
Item Item No. Description
MH230 00031521-00 CPU module MH230 (2,3GHz) DualCore HT; 2GB DDR4; 512kB nvRAM; 16MB
File-Flash; 2x Eth100/1000; 1xRS232; 1xRS232/422/485 isolated; 1xUSB2.0; I/O-
supply 30W; CFast-Slot
MH230 4GB CFA 00031521-03 CPU module MH230 (2,3GHz) DualCore HT; 2GB DDR4; 512kB nvRAM; 16MB
File-Flash; 2x Eth100/1000; 1xRS232; 1xRS232/422/485 isolated; 1xUSB2.0; I/O-
supply 30W; CFast-Slot; 4GB CFast-Card
MH230 CC 00031673-00 Like MH230 00031521-00; ColdClimate ( )
MH230 4GB CFA CC 00031673-03 Like MH230 4GB CFA 00031521-03; ColdClimate ( )
MH230 00032783-00 CPU module MH230 (2,3GHz) DualCore HT; 2GB DDR4; 1MB nvRAM; 2GB File-
Flash; 2x Eth100/1000; 1xRS232; 1xRS232/422/485 isolated; 1xUSB3.0; TPM;
I/O-supply 36W; CFast-Slot
MH230 4GB CFA 00032783-03 CPU module MH230 (2,3GHz) DualCore HT; 2GB DDR4; 1MB nvRAM; 2GB File-
Flash; 2x Eth100/1000; 1xRS232; 1xRS232/422/485 isolated; 1xUSB3.0; TPM;
I/O-supply 36W; CFast-Slot; 4GB CFast-Card
MH230 CC 00032784-00 Like MH230 00032783-00; ColdClimate ( )
MH230 4GB CFA CC 00032784-03 Like MH230 4GB CFA 00032783-03; ColdClimate ( )
Accessories
KZ 51/03 B 00012052-00 Supply connector: Terminal 03-pins pitch 5.08; cage clamp terminal with labe-
ling strips
CFA200/4GB 00017355-00 CFast Card 4GB
CFA200/8GB 00021781-00 CFast Card 8GB
CFA200/16GB 00019082-00 CFast Card 16GB

Bachmann electronic GmbH • 06/2022 • Specification subject to change – the product’s characteristics are exclusively governed by the data of the respective user manual.