0% found this document useful (0 votes)
3 views

Blank Formate

Uploaded by

jenarakeshroshan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
3 views

Blank Formate

Uploaded by

jenarakeshroshan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

TEST REPORT OF VCB CIRCUIT BREAKER

Location
Date:

1.0 Name Plate details of Circuit Breaker:


1.1 Serial No. : 1VYN020221004186
1.2 Make : ABB
1.3 Breaker type : VD4
1.4 Rated voltage : 36 kV
1.5 Rated current : 1250A
1.6 Short Time Current : 31.5 kA/3 Sec
1.7 Control Voltage: : 110 V DC

2.0 Insulation Resistance test :


Insulation Resistance test, Close condition Open condition
applied 5 kV RY YB BR RE YE BE RR` YY` BB`
Values in GΩ

3.0 Contact Resistance measurement (100 A DC) :


Contact Resistance of R – Phase Y – Phase B – Phase
Value in μΩ

4.0 Timing Interval Test.


Time in mili sec
Operations
R Phase Y Phase B Phase
Close
Open
Close-Open

5.0 Coil Resistance Test: (Using Multimeter)


Coil designation Resistance Value In Ω
Closing Coil Mega
Tripping Coil Mega
Spring Charge Motor Winding

6.0 Control circuit and operational checks :


Sr. No. Description Remarks
6.1 Manual charging of spring OK
6.2 Mechanical closing and Opening. OK
6.3 Mechanical interlocks of breaker OK
6.4 Charging of spring through motor OK
6.5 Electrical interlocks of breaker OK
6.6 Tripping through relays OK
6.7 Breaker close command blocking when Relay is in operated condition OK
6.8 Abnormality, if any NONE

7.0 Remarks :TESTED AS ABOVE


TEST REPORT OF NUMERICAL RELAY
Location
Date:

1.0 Name Plate details of relay :


Make Type Serial No. Rated I, In Aux. supply
C&S CSEZEN-F-100-B 1A 110 V DC

1.1 Relay setting:


Sr. no Protection Directional Plug setting TMS Characteristic
1 Phase OC (I>) Non. Directional 0.72*In 0.05 NINVI 1.3
2 Phase OC(I>>) Non. Directional 1.30*In 0.02 Sec -
3 Phase EF(IN>) Non. Directional 0.06*In 0.05 NINVI 1.3
4 Phase EF(IN>>) Non. Directional 0.13*In 0.02 Sec -

2.0 Measurements:
2.1 Current measurement (CT ratio:75/1 A)
Phase Injected Current(A) Measured Value(A)
R 1.0
Y 1.0
B 1.0

3.0 Over current Protection (I>)Setting I =0.72 xIn A, TMS= 0.05, IEC curve NINVI 1.3.
Injected Current Expected Time (Sec) Actual Trip Time(Sec )
(A) R Y B R Y B
1.44 0.218 0.218 0.218
3.6 0.093 0.093 0.093

4.0. Over current protection (I>>) Setting I =1.30xInA, T = 0.02 Sec


Phase Injected Current(A) Measured Trip Time (s)
R 1.305
Y 1.305
B 1.305

5.0 Earth fault protection (I0>) Setting I = 0.06xInA, TMS=0.05, IEC curve NINVI 1.3.
Injected Current Expected Time (Sec) Actual Trip Time(Sec )
(A) R Y B R Y B
0.12 0.218 0.218 0.218
0.3 0.093 0.093 0.093

6.0 Earth fault protection (I0>>) Setting I =0.13xInA, T= 0.02 Sec


Phase Injected Current(A) Measured Trip Time (s)
RN 0.135
YN 0.135
BN 0.135

 Relay inputs\ outputs latching, unlatching ok.


 Relay LED glowing ok.
 Master trip relay operation ok.

Remarks:TESTED AS ABOVE
TEST REPORT OF TRANSFORMER
Location
Date:

1.0 Name Plate details of transformer :


Make Suzlon Energy LTD Rating 2.8 MVA
Sr.No. No Of Tap / N.T. 5/3
Voltage Ratio 33/0.690 kV Tap Changer Off Load
Current Ratio 48.99/2342.87 A Vector Group Dyn11

2.0 PI test :
Insulation resistance test HV – E, (5000 V) HV - LV, (5000 V) LV - E, (5000 V)
After 1 min.(Values in Ω) GΩ GΩ GΩ
After 10 min.(Va lues in Ω) GΩ GΩ -
PI Values -

3.0 Magnetic balance test :Tap position : 3


Phase RY YB BR
RY
YB
BR

4.0 Turns Ratio & Magnetizing Current test :


Tap Actual IMag (Value In mA)
RY/rn % Error YB/yn % Error BR/bn % Error
No. Ratio R Y B
1 87.030
2 84.908
3 82.872
4 80.766
5 78.747

5.0 Winding Resistance test : I DC = 10A


5.1 HV Winding : (values in Ω)
Tap No RY YB BR
1
2
3
4
5

5.2 LV Winding @ Centre Tap No-3 : (values in mΩ)


rn yn bn

6.0 Conformity test :


Sr. No. Description Remarks
6.1 Buchchholz relay alarm + trip contacts OK
6.2 PRV Relay alarm + trip contacts OK
6.3 WTI, OTI alarm + trip contacts OK
6.4 MOG contacts OK
6.5 Phase sequence check OK

7.0 Remarks : TESTED AS ABOVE

You might also like