Simulation of un

resorte
Date: lunes, 9 de diciembre de 2024
Designer: Solidworks
Study name: Static 1
Analysis type: Static
Student: Jose Alberto Salinas
Miguel

Table of Contents
Description...............................................1
Assumptions.............................................2
Model Information.....................................2
Study Properties.......................................3
Units.........................................................3
Material Properties...................................4
Description Loads and Fixtures...................................5
Elaboracion y simulacion de un resorte sometido a
fuerza, agregandole 2 bases para la simulacion Connector Definitions...............................5
Interaction Information.............................5
Mesh information......................................6
Sensor Details..........................................6
Resultant Forces.......................................7
Beams......................................................7
Study Results............................................8
Conclusion..............................................10

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 1

Assumptions

Model Information

Model name: DEL BETO JAJA

Current Configuration: Default

Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Sweep4
Mass:9,23031 kg
Volume:0,00117287
C:\Users\DELL\Documents\
m^3
diseño 2\DEL BETO
Solid Body Density:7.869,87
JAJA.SLDPRT
kg/m^3
Dec 9 16:48:41 2024
Weight:90,457 N

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 2

Study Properties
Study name Static 1
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from Off
SOLIDWORKS Flow Simulation
Solver type Automatic
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement Off
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (C:\Users\DELL\
Documents\diseño 2)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 3

Material Properties
Model Reference Properties Components
Name: AISI 1015 Steel, SolidBody 1(Sweep4)(DEL
Cold Drawn (SS) BETO JAJA)
Model type: Linear Elastic
Isotropic
Default failure Unknown
criterion:
Yield strength: 3,25e+08 N/m^2
Tensile strength: 3,85e+08 N/m^2
Elastic modulus: 2,05e+11 N/m^2
Poisson's ratio: 0,29
Mass density: 7.870 kg/m^3
Shear modulus: 8e+10 N/m^2
Thermal 1,2e-05 /Kelvin
expansion
coefficient:

Curve Data:N/A

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 4

Loads and Fixtures
Fixture
Fixture Image Fixture Details
name
Entities: 1 face(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0,177658 302,466 0,110386 302,466
Reaction
0 0 0 0
Moment(N.m)

Load name Load Image Load Details

Entities: 1 face(s)
Type: Apply normal force
Value: 300 N

Force-1

Connector Definitions
No Data

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 5

Interaction Information
No Data

Mesh information
Mesh type Solid Mesh
Mesher Used: Blended curvature-based mesh
Jacobian points for High quality mesh 16 Points
Maximum element size 11,8983 mm
Minimum element size 3,96605 mm
Mesh Quality High

Mesh information - Details

Total Nodes 94710
Total Elements 51357
Maximum Aspect Ratio 16,393
% of elements with Aspect Ratio < 3 98,4
Percentage of elements with Aspect 0,0136
Ratio > 10
Percentage of distorted elements 0
Time to complete mesh(hh;mm;ss): 00:01:07
Computer name: RAFAEL8210150

Sensor Details
No Data

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 6

Resultant Forces
Reaction forces
Selection Sum Y Sum Z Resultant
Units Sum X
set
Entire Model N 0,177658 302,466 0,110386 302,466

Reaction Moments
Selection Sum Y Sum Z Resultant
Units Sum X
set
Entire Model N.m 0 0 0 0

Free body forces

Selection Sum Y Sum Z Resultant
Units Sum X
set
Entire Model N 42,0768 5,72128 -56,5397 70,7102

Free body moments

Selection Sum Y Sum Z Resultant
Units Sum X
set
Entire Model N.m 0 0 0 1e-33

Beams
No Data

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 7

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 3,453e-01N/m^2 1,309e+10N/m^2
Node: 81615 Node: 93634

DEL BETO JAJA-Static 1-Stress-Stress1

Name Type Min Max

Displacement1 URES: Resultant 0,000e+00mm 3,801e+03mm
Displacement Node: 21 Node: 16

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 8

Name Type Min Max

DEL BETO JAJA-Static 1-Displacement-Displacement1

Name Type Min Max

Strain1 ESTRN: Equivalent Strain 6,520e-12 3,249e-02
Element: 6675 Element: 44048

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 9

 Name Type Min Max

DEL BETO JAJA-Static 1-Strain-Strain1

Conclusion
En esta practica se realizo la construccion de un resorte con 2 bases para fijacion y para
someterlo a fuerza, al someterlo, se pudo notar que tiene cierta resistencia para comprimirse
completamente, en este caso, se pudo notar que la base, se hace de lado es decir, de una parte
se deforma mas que de la otra .

Analyzed with SOLIDWORKS Simulation Simulation of DEL BETO JAJA 10