Scribd
Upload
180 views1 page

R155 ATOD

Uploaded by

Kushan Nakrani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
180 views1 page

R155 ATOD

Uploaded by

Kushan Nakrani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 6911

In Accordance with EN 10204 :2004 Type 3.1

CM/L 9100015395

CUSTOMER :PREMDEEP METAL CERTIFICATE NO. :JSL-6114/QA/2024-25/DOM/01893252


CITY :MUMBAI DATE :05.07.2024 VEHICLE NO. :MH04FJ5754
P.O.NO. :1449837_PPP/15UNE/Yard PO DATE:20.05.2024 Ref. MTC No. :JSL-HRD/QA/2024-25/DOM/01874440
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0586434822
SHIPMENT/DELIVERY NO. :6500084055 NET WT(MT) :2.004

Material Description/Product Grade / Type Material Specifications Process-Route


STAINLESS STEEL 316L/316 ASME SA 240/SA 240M,SEC.II PART A, ED. 2023; ASTM A EF-AOD-LRF-CCS
240/A 240M, ED. 2023; IS 6911-2017 AMD. 3

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 41842309 41842309 285,369 0.501 1 2406J0029 8.000 1,250.00 6,000.00 N1 Mill Edge PRIME
2 41842310 41842310 285,369 0.501 1 2406J0029 8.000 1,250.00 6,000.00 N1 Mill Edge PRIME
3 41842311 41842311 285,369 0.501 1 2406J0029 8.000 1,250.00 6,000.00 N1 Mill Edge PRIME
4 41842312 41842312 285,369 0.501 1 2406J0029 8.000 1,250.00 6,000.00 N1 Mill Edge PRIME

CHEMICAL ANALYSIS (LADLE)


HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
2406J0029 0.022 1.27 0.004 0.042 0.32 10.02 16.13 0.036 2.03 - - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE


Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HBW
Mpa Mpa mm mm mm

1 296 - 597 59 - - 163 / 160 -

2 296 - 597 59 - - 163 / 160 -

3 296 - 597 59 - - 163 / 160 -

4 296 - 597 59 - - 163 / 160 -

ADDITIONAL INFORMATION
(1) MATERIAL ANNEALED IN ACCORDANCE WITH REQUIREMENTS AS LAID IN ASME SA 480/SA 480M, ASTM A 480/A 480M ,(TABLE A 1.2, HEAT TREATMENT REQUIREMENTS
SOLUTION ANNEALED AT TEMPERATURE 1040°C MINIMUM AND FOLLOWED BY WATER QUENCHING.
(2) SURFACE FINISH AS PER SA 480/SA 480M/A 480/A 480M/IS 6911-2017 : N1 (NO.1 BOTH SIDE)
(3) NO WELD REPAIR HAS BEEN DONE ON ANY PLATES.
(4) TOL. AS PER JINDAL PRODUCT STANDARD(WIDTH +30MM/ -0MM FOR ME & +10MM/ -0MM FOR TE, LENGTH +50MM/-0MM UP TO 10MM & +100MM/ -0MM ABOVE 10MM).
(5) THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD3 CHEMICAL & MECHANICAL PROPERTIES OF PRODUCT
AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED IN BIS CERTIFICATION.
(6) MARKING ON PLATES : JSL LOGO/MANUF. NAME/MATERIAL SPECIFICATION/GRADE/PLATE NO./HEAT NO. /SIZE/FINISH/QUALITY
(7) MATERIAL GRADE AS PER IS 6911-2017 AMD. 3 : 316L

FINISHES:- HOT ROLLED ANNEALED & PICKLED (N1, 1D); COLD ROLLED ANNEALED & PICKLED (2D, 2B); HOT ROLLED BLACK (BL) & HOT ROLLED ANNEALED (ANN)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in ISO 9001- 2015
Hot Rolling Division, accordance with requirements of the material specification, SO/PO and has been found to meet ISO 14001-2015
O.P. Jindal Marg, HISAR-125005.INDIA, these requirements. ISO 45001:2018
TEL :+91-1662 -222471-83, ISO 50001:2018
FAX :+91-1662 -220496, 220476 The material supplied under this Test Certificate is free from any radioactive contamination as CERTIFIED COMPANY
Email: [email protected] checked by procedures established by Jindal Stainless Limited as per the recommendations
Format Ref: QAD/35/F-1/REV.NO.07, Eff Date: 02/03/2023 provided by AERB.

1/1

You might also like