MILL TEST CERTIFICATE Jindal Stainless Limited.

(INSPECTION CERTIFICATE) IS 6911

In Accordance with EN 10204 :2004 Type 3.1

CM/L 9100015395

CUSTOMER :MAGNA METALS CERTIFICATE NO. :JSL-6114/QA/2024-25/DOM/01805187

CITY :MUMBAI DATE :11.04.2024 VEHICLE NO. :MH04GC7951
P.O.NO. :1409316_MSA/5/4/PPP/30/4 PO DATE:05.04.2024 Ref. MTC No. :JSL-HRD/QA/2023-24/DOM/01789948
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0586407463
SHIPMENT/DELIVERY NO. :6500076673 NET WT(MT) :4.946

Material Description/Product Grade / Type Material Specifications Process-Route

STAINLESS STEEL 316L/316 ASME SA 240/SA 240M,SEC.II PART A, ED. 2023; ASTM A EF-AOD-LRF-CCS
240/A 240M, ED. 2023; IS 6911-2017 AMD. 3

PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 41371025 41371025 283,251 0.620 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
2 41371026 41371026 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
3 41371027 41371027 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
4 41371028 41371028 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
5 41371029 41371029 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
6 41371030 41371030 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
7 41371031 41371031 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
8 41371032 41371032 283,251 0.618 1 2403J0242 10.000 1,250.00 6,000.00 N1 Mill Edge PRIME
CHEMICAL ANALYSIS (LADLE)
HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
2403J0242 0.018 1.26 0.004 0.044 0.38 10.02 16.40 0.030 2.02 - - - -

MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE

Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HBW
Mpa Mpa mm mm mm

1 292 - 591 59 - - 163 / 160 -

2 292 - 591 59 - - 163 / 160 -

3 292 - 591 59 - - 163 / 160 -

4 292 - 591 59 - - 163 / 160 -

5 292 - 591 59 - - 163 / 160 -

6 292 - 591 59 - - 163 / 160 -

7 292 - 591 59 - - 163 / 160 -

8 292 - 591 59 - - 163 / 160 -

ADDITIONAL INFORMATION
(1) MATERIAL ANNEALED IN ACCORDANCE WITH REQUIREMENTS AS LAID IN ASME SA 480/SA 480M, ASTM A 480/A 480M ,(TABLE A 1.2, HEAT TREATMENT REQUIREMENTS
SOLUTION ANNEALED AT TEMPERATURE 1040°C MINIMUM AND FOLLOWED BY WATER QUENCHING.
(2) SURFACE FINISH AS PER SA 480/SA 480M/A 480/A 480M/IS 6911-2017 : N1 (NO.1 BOTH SIDE)
(3) NO WELD REPAIR HAS BEEN DONE ON ANY PLATES.
(4) TOL. AS PER JINDAL PRODUCT STANDARD(WIDTH +30MM/ -0MM FOR ME & +10MM/ -0MM FOR TE, LENGTH +50MM/-0MM UP TO 10MM & +100MM/ -0MM ABOVE 10MM).
(5) THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD3 CHEMICAL & MECHANICAL PROPERTIES OF PRODUCT
AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED IN BIS CERTIFICATION.
(6) MARKING ON PLATES : JSL LOGO/MANUF. NAME/MATERIAL SPECIFICATION/GRADE/PLATE NO./HEAT NO. /SIZE/FINISH/QUALITY
(7) MATERIAL GRADE AS PER IS 6911-2017 AMD. 3 : 316L

PURSUANT TO COMPOSITE SCHEME OF ARRANGEMENT,APPROVED BY THE HONORABLE NCLT ON FEBRUARY 2, 2023, JINDAL STAINLESS HISAR LIMITED (PAN - AAFCK5692N )
STANDS MERGED WITH JINDAL STAINLESS LIMITED (PAN-AABCJ1969M).
FINISHES:- HOT ROLLED ANNEALED & PICKLED (N1, 1D); COLD ROLLED ANNEALED & PICKLED (2D, 2B); HOT ROLLED BLACK (BL) & HOT ROLLED ANNEALED (ANN)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".

Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in ISO 9001- 2015
Hot Rolling Division, accordance with requirements of the material specification, SO/PO and has been found to meet ISO 14001-2015
O.P. Jindal Marg, HISAR-125005.INDIA, these requirements. ISO 45001:2018
TEL :+91-1662 -222471-83, ISO 50001:2018
FAX :+91-1662 -220496, 220476 The material supplied under this Test Certificate is free from any radioactive contamination as CERTIFIED COMPANY
Email: [email protected] checked by procedures established by Jindal Stainless Limited as per the recommendations
Format Ref: QAD/35/F-1/REV.NO.07, Eff Date: 02/03/2023 provided by AERB.

1/1