Scribd
Upload
3 views

ISO 30CrNiMo8

Uploaded by

Sai kumar BHOGOPURAPU
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

ISO 30CrNiMo8

Uploaded by

Sai kumar BHOGOPURAPU
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Material - ISO 30CrNiMo8

Standard Specification for Mild Steel Alloys Bar and Rod


Group - Ferrous Mild Steel Alloys
Sub Group - ISO 30CrNiMo8 Mild Steel Alloys Bar and Rod
Application - Intended for Valve, Pump, General Engineering, Automotive and Other Industries
Grade Belongs to the Industry - Bar and Rod

Chemical Composition Heat Treatment


Carbon C% 0.260 - 0.340
Silicon Si % 0.100 - 0.400
Manganese Mn % 0.500 - 0.800
As Raw or Annealing or Normalizing or Hardening and
Phosphorus P% 0.025 max.
Tempering
Sulphur S% 0.035 max.
Chromium Cr % 1.800 - 2.200
Molybdenum Mo % 0.300 - 0.500
Nickel Ni % 1.800 - 2.200
Iron Fe % Balance Mechanical Properties
- - - Tensile Strength in Mpa 930 - 1230
- - - Yield Strength in Mpa 750 min.
- - - Elongation in % 12 min.
- - - Reduction of Area in % 40 min.
- - - Hardness in BHN 248 max.
- - - Impact in Joule 30 J @ RT

Cross Reference Table


Material Standard Country Grade Belong to the Industry
30CrNiMo8 EN European Union Bar and Rod
1.658 EN European Union Bar and Rod
P 1000 - 30CrNiMo8 AFNOR NF France Bar and Rod
30 CND 8 AFNOR NF France Bar and Rod
NCMo 6 Z MSZ Hungary Bar and Rod
NCMo 6 MSZ Hungary Bar and Rod
31 CrNiMo 8 ISO International Bar and Rod

Further any inquiry to discuss with Gravity Cast Pvt. Ltd. – Gravity Group of Companies team member Call
on +918469160029, or email [email protected]

All information in our data sheets and website is indicative only and is not intended to be a substitute for the full specification from which it is extracted. It is intended to
provide typical values to allow comparison between metal alloy option rather than a definitive statement of mechanical performance or suitability for a particular
application as these will vary with temperature, product type and product application. It is presented apart from contractual obligations and does not constitute any
guarantee of properties or of processing or application possibilities in individual cases. Our warranties and liabilities are stated exclusively in our terms of business.

ONE STOP SOLUTION FOR METAL PARTS

You might also like