Anklet Beaded Strings
Anklet Beaded Strings
Anklet
Foot Jewelry is perfect for
a wedding party, for the
barefoot bride and her
bridesmaids. They could
be worn barefoot or with
shoes and flip flops.
This simple and
fashionable boho anklet is
made of three crochet
strings embellished with
upcycled glass beads from
a broken necklace.
Skill Level: Beginner
Measurements:
Adjustable, one size fits
all. (23-25cm/9-10” long,
depending on where the
button is placed)
Materials:
- crochet hook size 1-2
- 26 beads 0.25-0.3”
diameter
- 1 transparent
button/big glass bead
- 10yds cotton/silk yarn
(4ply weight).
- tension/gauge
30st=10cm/4’
Abbreviations used:
ch(s) = chain(s)
sc = single crochet
sl st = slip stich
sk st = skip stitch
** = Repeat
instructions between
asterisks.
Pull
Oncethe needle
you've and thread
crocheted until
all the wayone end of
around thethe
4thyarn
ring,comes
pull a out
loopof the bead.
around the chRepeat
that isthese
linkingsteps
the two rings, then
for all other beads. yo and slst. Pull the yarn tightly. Continue to crochet the other half of rings
until allbeads
Leave rings hanging
are covered.
on the string of yarn and start working the foundation chain: ch80
R1: ch2,sc12, *ch2, place one bead close to the ch on hook, wrap the yarn around the hook
and ch1, then slst in the 1st ch (beside the foundation ch), and work sc7 in the main
chain.* Repeat ** for 7 times then sc12 to the end of row.
When you are done with all 4 rings, finish off the yarn by passing the cut end through the last
loop. Pull firmly.
Weave in the end by pulling the yarn back and forth under the crochet seam several times.
You have done the first napkin ring!
R2: ch2, sc12, ch66 slst into first string (count 12sc from the end of the string. Careful not to
twist the string) then sc11.
R4: ch2, sc15, ch70, then slst into the 5thsc after the last bead of the previous row, and sc to
the end of row.
R5: ch2, sc22, *ch2, place one bead close to the ch on hook, wrap the yarn around the hook
and ch1, then slst in the 1st ch of the main string, then sc6*. Repeat ** 8 times then sc to
the end.
Finish off the yarn by passing the cut yarn end through the last loop. Sew on one button to close
the anklet at the back.
Weave in the ends by pulling the yarn back and forth under the crochet seam several times and
you are done!
Wear and have fun!