Easy7 VMS User Manual

Statement
 This manual may contain inaccuracies, discrepancies in the operation of product

functions, or typographical errors.

 Our company will update this manual according to the reinforcement and change of

product functions, also regularly improve and update the software and hardware

products described in this manual. The updated information will be reflected in the latest

version of the manual without further notice.

 Due to our continuous adoption of new technologies, product parameters are subject to

change without prior notice.

 This manual is only for the customer's reference and guidance, and does not guarantee

that it is completely consistent with the real object. Please take the real object as the

standard.

 All text, tables, and image information in this manual are protected by relevant national

laws and cannot be used without permission.

 Please be aware of the open characteristics of the Internet. If you connect your product

to the Internet, there may be risks such as network attack, hacker attack and virus

infection. Our company will not be responsible for the problems such as abnormal

product operation and information leakage caused by this, but we will provide you with

technical support related to the product in a timely manner.

 When using this product, please strictly comply with applicable laws and regulations to

avoid infringing on third-party rights, including but not limited to intellectual property,

data rights, or other privacy rights. You are also not allowed to use this product for
 weapons of mass destruction, biological and chemical weapons, nuclear explosions, or

any unsafe use of nuclear energy or for human rights violations.

 If the content of this document conflicts with applicable laws, the legal provisions shall

prevail.

 The copyright and final interpretation right of this document belong to our company.
 Preface
This user manual is based on video surveillance system. Provide a brief function

description for the system to help users understand the operation process of the system.

The purpose of this document is to ensure that the user uses the product properly to

avoid danger or property damage. Before using this product, please read it carefully and

keep it for future reference. If you have any questions in use, please consult our after-sales

service.

Symbolic agreement
For symbols that appear in the document, the description is as follows:

Icon Instruction

Indicates a potential risk that, if ignored, may result in a function that cannot be
Notice：
used properly or an unpredictable result.

The expression is the additional information of the text, which is the emphasis
Explain：
and supplement to the text.
 Content
1 Product overview ....................................................................................................................................... 1

1.1 Product profile ................................................................................................................................ 1

1.2 Product highlights .......................................................................................................................... 1

1.3 Update instructions ........................................................................................................................ 2

1.4 Terms and abbreviations ............................................................................................................... 2

1.5 Precautions for use ........................................................................................................................ 3

2 Login and Configuration ............................................................................................................................ 5

2.1 Software login ................................................................................................................................ 5

2.2 Homepage framework introduction................................................................................................ 7

2.2.1 Real-time alarm .................................................................................................................. 9

2.2.2 P2P Account Login ........................................................................................................... 10

2.2.3 Other button operations .................................................................................................... 10

3 Equipment management ......................................................................................................................... 14

3.1 Encode device ............................................................................................................................. 14

3.1.1 Auto search....................................................................................................................... 15

3.1.2 Add ................................................................................................................................... 19

3.1.3 Modify ............................................................................................................................... 22

3.1.4 Delete ............................................................................................................................... 23

3.1.5 Invert Selection ................................................................................................................. 23

3.1.6 Refresh ............................................................................................................................. 24

3.2 Decoding device .......................................................................................................................... 24

 3.3 Group ........................................................................................................................................... 24

3.3.1 Add device to custom groups ........................................................................................... 26

3.3.2 Modify the channel name ................................................................................................. 27

3.3.3 Get and modify the device alarm port .............................................................................. 28

3.3.4 Modify group ..................................................................................................................... 30

3.3.5 Delete group ..................................................................................................................... 30

4 Live view .................................................................................................................................................. 31

4.1 Custom Device List ...................................................................................................................... 31

4.1.1 Customize the device list with the right-click menu.......................................................... 31

4.1.2 Device grouping right-click menu ..................................................................................... 32

4.1.3 Device channel right-click menu....................................................................................... 33

4.1.4 Alarm entry port right-click menu ..................................................................................... 35

4.1.5 Alarm output port right-button menu ................................................................................ 35

4.2 Video preview window ................................................................................................................. 35

4.2.1 Video preview window displays the information............................................................... 36

4.2.2 Video preview screen toolbar ........................................................................................... 38

4.2.3 Video preview window right-click menu ........................................................................... 41

4.3 Cruise Plan................................................................................................................................... 43

4.3.1 Modify the cruise intervals ................................................................................................ 44

4.3.2 Delete view ....................................................................................................................... 44

4.3.3 Move view ......................................................................................................................... 45

4.4 Group switch set .......................................................................................................................... 45

 4.4.1 Modify number of components ......................................................................................... 46

4.4.2 Open/close group switch .................................................................................................. 47

4.5 Target information ........................................................................................................................ 47

4.6 Favorites ...................................................................................................................................... 48

4.7 View ............................................................................................................................................. 48

4.8 PTZ Control .................................................................................................................................. 49

4.9 Unlocks the encrypted channel function ...................................................................................... 50

4.10 Fish eye unfold........................................................................................................................... 51

4.11 USB keyboard control ................................................................................................................ 52

5 Video playback ........................................................................................................................................ 54

5.1 Video query .................................................................................................................................. 54

5.2 Video playback............................................................................................................................. 55

5.3 Playback control........................................................................................................................... 56

5.3.1 Replay window right-click menu ....................................................................................... 58

5.4 Video download ........................................................................................................................... 58

5.4.1 Download by file ............................................................................................................... 59

5.4.2 Download by time period .................................................................................................. 60

5.5 Recently browse .......................................................................................................................... 60

5.6 Fish eye unfold............................................................................................................................. 61

6 System configuration ............................................................................................................................... 62

6.1 Common Settings ........................................................................................................................ 62

6.2 Video Settings .............................................................................................................................. 64

 6.3 Storage management .................................................................................................................. 65

6.4 Intelligent application ................................................................................................................... 67

6.5 Record plan .................................................................................................................................. 67

7 Alarm management ................................................................................................................................. 69

7.1 Real-time alarm............................................................................................................................ 69

7.2 History alarm ................................................................................................................................ 70

8 TV Wall .................................................................................................................................................... 72

8.1 Create layout ................................................................................................................................ 72

8.2 Bind decoding .............................................................................................................................. 73

8.3 Scene generation ......................................................................................................................... 76

8.4 Preview & Wall up ........................................................................................................................ 78

9 Vehicle management .............................................................................................................................. 80

9.1 Region creation ............................................................................................................................ 80

9.1.1 Basic Information .............................................................................................................. 80

9.1.2 Entrance/Exit Settings ...................................................................................................... 82

9.1.3 On duty management ....................................................................................................... 83

9.1.4 Black and White List ......................................................................................................... 85

9.2 Region binding ............................................................................................................................. 87

9.3 Area Preview ................................................................................................................................ 89

10 Face recognition .................................................................................................................................... 93

10.1 Face database management ..................................................................................................... 93

10.1.1 Face database addition/modification/delete................................................................... 93

 10.1.2 Face Image Addition ...................................................................................................... 94

10.1.3 Personnel query ............................................................................................................. 95

10.1.4 Add Existing Face Image ............................................................................................... 95

10.1.5 Delete (All) Face Image(s) ............................................................................................. 96

10.1.6 Face Image Import/Export/Export All ............................................................................. 96

10.2 Face database download........................................................................................................... 97

10.2.1 Face library synchronization........................................................................................... 98

10.3 Face configuration ..................................................................................................................... 99

11 Access Management........................................................................................................................... 100

11.1 Bayonet preview ...................................................................................................................... 100

11.1.1 Device sorting ............................................................................................................... 100

11.2 Bayonet history ........................................................................................................................ 101

11.2.1 Access area .................................................................................................................. 102

12 Electronic Map..................................................................................................................................... 103

12.1 Electronic Map configuration ................................................................................................... 103

12.1.1 Add map ....................................................................................................................... 103

12.1.2 Delete map ................................................................................................................... 103

12.1.3 Modify map ................................................................................................................... 104

12.1.4 Add / delete devices ..................................................................................................... 104

12.2 Configure heat zone ................................................................................................................ 105

12.3 Electronic map preview ............................................................................................................ 106

13 User management ............................................................................................................................... 108

 13.1 Add user ................................................................................................................................... 108

13.2 Edit user ................................................................................................................................... 110

13.3 Delete user ............................................................................................................................... 110

14 Intelligent search ................................................................................................................................. 112

14.1 Face retrieval ........................................................................................................................... 112

14.2 Behavior analysis and retrieval ................................................................................................ 114

15 Data statistics ...................................................................................................................................... 117

15.1 Face statistics .......................................................................................................................... 117

15.1.1 Statistics by age group ................................................................................................. 118

15.1.2 Statistics by gender ...................................................................................................... 119

15.1.3 Statistics by the number of people ............................................................................... 120

15.1.4 Statistics by whether wearing glasses ......................................................................... 122

15.1.5 Statistics by whether wearing mask ............................................................................. 124

15.1.6 Statistics by body temperature measurement.............................................................. 125

15.2 Visitor flow statistics ................................................................................................................. 127

15.2.1 Real-time Statistics Device List .................................................................................... 127

15.2.2 Real-time Statistics Area List ....................................................................................... 131

15.2.3 Real-time Data of Real-time Statistics ......................................................................... 133

15.2.4 Video Page of Real-time Statistics ............................................................................... 134

15.2.5 Report statistics ............................................................................................................ 134

15.3 Heat map statistics................................................................................................................... 137

16 Alarm configuration ............................................................................................................................. 139

 16.1 Alarm configuration of Monitoring point ................................................................................... 139

16.1.1 Linkage notification ....................................................................................................... 141

16.1.2 Linking video ................................................................................................................. 143

16.1.3 Linkage alarm output .................................................................................................... 144

16.1.4 Linkage deployment time ............................................................................................. 145

16.2 Alarm configuration of device .................................................................................................. 147

16.3 Alarm configuration of People counting area .......................................................................... 148

17 Operation logs ..................................................................................................................................... 149

18 Video player ........................................................................................................................................ 151

1 Product overview

1.1 Product profile

Video monitoring system is a dedicated application for managing, previewing and

operating network monitoring devices based on MacOS and Windows operating systems,

which is applicable to a full range of NVR, IPC and other devices. The software can realize

grouping management of monitoring points according to different scenes, customize grouping

names, conduct real-time video browsing, audio preview, voice intercom and other operations

based on equipment, control equipment PTZ, set preset bits and calls, switch video playback

between custom groups, support front-end and local video playback, and control playback

through the timeline. At the same time, video files can be downloaded to the client. The

software has rich video surveillance business functions and is suitable for various video

surveillance scenarios.

1.2 Product highlights

 Comprehensive function

It provides abundant management and operation functions for small and medium-sized

monitoring systems, such as Live view control of audio and video, retrieval and playback of

historical video data, reception of alarm information, linkage disposal, etc.

 Strong extensibility

Video monitoring software capable of integrated management of NVR/IPC.

1
1.3 Update instructions

See the update instructions at the time of software release for details.

1.4 Terms and abbreviations

No.

2
1.5 Precautions for use

 Current monthly largest quantity of human face pictures received from single channel

is 1 million. The current upper limit of quantity of human face pictures received from all

channels is 5 million. If the quantity exceeds the upper limit, result of intelligent retrieval

cannot be acquired.

 Standalone version can support 500 point locations at most at present.

 Present screen supporting 3,840*2,160 (4K) resolution at most.

 This platform is not compatible with cameras in sky-eye series cameras at present.

 MAC AIO only supports external microphones.

 As for the equipment added in P2P account number way, audio sampling frequency

shall be set to be 8kHz. Other sampling frequency may cause program failure on standalone

version, so please use it cautiously.

 As for the same NVR and IPC, video playback and video download exist at the same

time. 5 channels at most are supported at present. Otherwise, download failure or equipment

overload will be reminder in download process and video playback will fail.

 MAC system authorizes standalone version, such as microphone authority. Restart

the standalone version.

 As for MAC version, the Live view in full screen cannot quit from full screen by

pressing ESC (unless equipment list is closed).

 Firewall of computer may influence some normal functions of standalone version.

Please add white list or close firewall.

3
4
2 Login and Configuration

During network access, in order to protect the security and privacy of personal accounts and

improve the security of monitoring, please set the login password and prevent others from

logging in the device to obtain monitoring data.

2.1 Software login

Premise：

The VMS software is installed.

Operation steps:

1. Double-click the application icon on the desktop to enter the system login interface. You

need to set the initial password for the first login, as shown in the following figure.

2. After the initial password is set, enter the password protection setting interface, and you can

choose to skip, as shown in the following figure.

5
3. After setting the password protection question or skipping, you can enter the login interface,

as shown in the following figure.

Notice：

 In order to protect your personal privacy and corporate data and avoid network security problems, it

is recommended that you set a strong password that meets the security specifications.

 In order to improve the security of product network use, the password should be two or more

combinations of numbers, letters and special characters, and support 6-32 bits.

 If you do not set the security problem, when you forget the password, you can only uninstall and

reinstall the software.

The interface parameters are described as follows:

Parameter Instruction

6
 Tick and enable the check box. If the user name and password is correct,

there’s no need to input user name and password anymore the next time, you

Auto login may enter automatically.

Cancel automatic login: System configuration -> Common Settings->Login

Settings->Automatic Login Software.

Tick and enable the check box. If the user name and password is correct, the

Save password current password will be saved and it will automatically fill in the password for

the next time.

Click and enable it. If the user name and password is correct, you may log in
Login
the program.

Click enable and click to enter the password verification page. After the

Forget the password password security question is successfully verified, you can re-enter the initial

password setting page to set the password.

English Support shifting between multiple languages.

Click and enable it. Click to close login interface.

2.2 Homepage framework introduction

Introduce the home page interface parameters and function modules.

Operation steps:

1. Enter the correct user name and password in the platform registration and login interface,

and click [Login] to enter the main program interface of the platform. The default grouping of

the Home page is shown in the following figure.

7
The functional parameters of the module are described as follows:

Module name Instruction

Live view View the live images at the monitoring point.

Equipment management Add, modify and delete groups.

Video playback Search and play the recording file at the monitoring point.

TV Wall Configuration and preview of TV wall.

Vehicle management Support regional rehicle management

Real-time indication of unit alarm message to facilitate access to unit

Alarm management
exception.

System configuration Typical operation on client configuration.

Manage client users in a unified way, and add, edit, delete and configure
User management
permissions.

Alarm configuration Coordinated configuration of various alarms

Intelligent search Retrieve the received intelligent analysis information, such as face

8
 retrieval.

Electronic Map Management and operation function of electronic map.

The total amount, proportion and trend of data are displayed through
Data statistics
statistical charts and lists.

Face recognition Management and distribution of face database.

Access Management Bayonet preview and information query

Query the operation log of the system to understand the usage of the
Operation logs
system.

Video player Local video files can be played.

2.2.1 Real-time alarm

Premise：

The device has been added to the client software, and relevant alarms, such as intelligent

alarm and mobile alarm, are configured on the device. When an alarm occurs on the

device, the real-time alarm will push the alarm information.

Operation steps：

1. Click the "" button in the upper right corner of the interface to display the real-time alarm

information, as shown in the following figure.

2. Click " " to enter the alarm setting function module interface. For details, please refer to

Chapter 8 Alarm Setting.

9
2.2.2 P2P Account Login

Premise：

You have registered an account in the APP.

Operation steps：

1. After entering the interface, click the " " button in the upper right corner,

and the [P2P account login] interface will pop up, as shown in the following figure.

2. Enter the P2P account and password to log in to the P2P account. Some regions support

mobile phone number or email account registration, please choose according to the actual

situation.

3. Check the synchronization device. After successfully logging in to the P2P account, the

device added under the account will be added to the software.

2.2.3 Other button operations

Operation steps：

1. Click the " " button in the upper right corner to display the current login status, as shown

in the following figure.

10
2. Click the " " button in the upper right corner to display the user manual and version

information. Select [User Manual] or [Version Information] to jump to the corresponding file.

3. Click the " " button in the upper right corner to display the version information and date.

4. When the mouse slides over the " " button in the upper right corner of the interface, the

current CPU occupancy and memory occupancy will be displayed, as shown in the following

figure.

5. When connecting the video, when the CPU exceeds 75%, the real-time video cannot be

connected, as shown in the following figure.

6. Click the " " button in the upper right corner of the interface to lock the screen. After

entering the correct unlock password (i.e. login password), the screen will be unlocked, as

shown in the following figure.

11
7. Click the " " logout button in the upper right corner of the interface to pop up a logout

prompt box; click [OK] to exit the current platform and return to the login interface; click

[Cancel] or " " in the upper right corner of the prompt box to exit the current prompt box, as

shown in the following figure.

8. Click the " "button in the upper right corner of the interface to minimize the program; click

the" / / "button in the upper right corner of the interface to restore/maximize/full-screen

program; click the " " button in the upper right corner of the interface to exit the program.

9. To ensure that the user closes the program by mistake during use, when clicking the " "

button to exit the program, a prompt box will pop up to confirm whether to exit the program,

as shown in the following figure.

12
10. If " " is clicked by mistake, click "Cancel" to return to previous operation interface; if you

are sure to quit the system, click "OK" to quit.

Explain：

 Only accounts with [System Lock Permission] and [System Unlock Permission] can be locked and

unlocked.

 The current system time is displayed in the upper right corner of the interface.

 The navigation menu bar at the top of the interface can be separated from the main interface by

dragging the menu, and can also be exchanged by dragging.

 Interface function items are divided into common functions and basic functions. The module icons in

the basic function area and the common function area can be dragged to each other, and the user can

select the common function for use.

13
3 Equipment management

Add, delete, modify and group devices.

3.1 Encode device

Operation steps:

In the Equipment Management interface, click Coding Equipment to enter the Coding

Equipment interface, as shown in the following figure.

Parameters related to the interface are described as follows:

Parameter Instruction

Automatically search for devices under the same network segment,

Auto Search
batch addition supported.

Manually add encode device, support IP method, Standard domain

Add name method, EasyDDNS method , P2P direct connection method, P2P

account number method to add device.

Modify Modify information of already added device.

14
 Delete Delete already added device, batch deletion of device supported.

Select the device, and output the device information in three forms of

Output Equipment List, Organization Chart, and Organization Relationship

Table.

Click the device, and input the information in Equipment List,

Import Organization Chart, and Organization Relationship Table, which are

contained in the file.

Invert Selection Select all device that are not selected at that moment.

Refresh Update the status of device at current interface.

Name Display the name of all already added device.

Device Type Display the device type of all already added device.

IP Address Display the IP address of all already added device.

Port Display the port of all already added device.

Display the maximum number of video channels allowed to play of all

Video Channel
already added device.

Display the current connection status of all already added device. The
Connection Status
reason will be displayed, if equipment login fails.

Operation Click and enable it to open the web user-side interface of the device.

3.1.1 Auto search

Operation steps:

1. Click the [Auto Search] button to automatically search all devices in the same network

15
segment and pop up the [Add Device] window, as shown in the following figure.The

connection mode can be filtered to display devices with different connection modes, including

All, IP and Onvif.

2. Fill in the starting and ending IP in the [device network segment]. You can set the IP range

of the search device. When filling in the IP segment, it supports automatic completion and

verification. After filling, click [Search], and the devices that can be searched in the IP range

of the filled network segment will appear in the search results below, as shown in the following

figure.

16
3. Check one or more devices in the device box in the list, and then click the [Add] button to

pop up the [Add Device] window, as shown in the following figure. If you do not enter a name,

the device IP is used as the device name.

4. You can modify the connection mode of the device, including TCP, MCAST (SRTP), and

MCAST (RTSP). Some devices do not support multicast. When MCAST (SRTP) and MCAST

17
(RTSP) modes are selected, a prompt will pop up and video preview cannot be performed.

5. If [Add Offline] is checked, the device that is not online or has an incorrect user name and

password will also prompt successful addition, and the device that failed to be added will be

displayed in the device list; if [Add Offline] is not checked, the number of devices that were

added successfully or unsuccessfully will be prompted, and the device list will not display the

device that failed to be added.

6. Select Import to Group to automatically import the device into the group. Otherwise, you

need to manually add it to the group.

7. If an unactivated device is added, check [Automatic Activation] to activate the device. After

activation, the device IP and the computer IP are in the same network segment. If the

computer has multiple network cards, you need to select them.

8. You can modify the IP of the discovered device. Select the device to be modified in the

device list, and click [Modify] to pop up the [Modify Device IP] window. Enter the new IP

18
address and the correct user name and password, and the modification will be successful

and the [Prompt] window will pop up, as shown in the following figure.

9. Click the [Refresh] button to refresh the information of all devices in the search results list.

Explain：

 Device search results are displayed in order of IP.

 When MCAST (SRTP) and MCAST (RTSP) modes are selected, different multicast addresses shall

be configured for different devices and different code streams of the same device, otherwise cross-screen

phenomenon will occur.

 When adding devices in batches, it is recommended to set a unified user name and password for

multiple devices. If the user name and password information are wrong, it will lead to the failure of adding

some devices.

3.1.2 Add

Operation steps:

1. Click the [Add] button to enter the [Device Add] interface, as shown in the following figure.

19
The interface parameters are described as follows:

Parameter Instruction

Select different add type: IP type, Standard domain name type,

Add mode EasyDDNS type , P2P direct connection type, P2P account number

type，onvif type.

Check to add online or offline devices. Only online devices can be

Off-line Add
added after the check is removed.

Enter a device name. (There is an illegal character limit when adding

Device Name a device name. The following characters are not allowed to be entered

~! # $% ^ () = [] { }, ":; '< >? * ` +/\ &)

Device Type This is required when the standard domain name mode is selected.

20
 Device IP Device IP. This field is required when IP and Onvif are selected.

Device ID number. This item is required to be filled in when selecting

Device ID
P2P direct connection mode.

Domain name of device. This is required when selecting the standard

DNS
domain name and EasyDDNS mode.

The communication port of the device. Onvif defaults to 80. IP and

Port
standard domain name defaults to 3000.

User Name The login user name for the device.

Password The login password for the device.

Video Channel The total number of video channels owned by the device.

After checking, the system automatically adds the device to the custom
lmport to Group
list and creates a group (the same as the device name).

After checking, the system automatically adds the device to the custom
Alarm Input
list and creates a group (the same as the device name).

Alarm Output Number of alarm output ports owned by the device.

2. Select the [Add Device] mode in the [Add Device] window, fill in the corresponding

information, and check whether to add a device offline and whether to import a group as

required.

3. After entering the correct information, click [Add], and the display shows that the device is

added successfully. The added device information appears in the list, as shown in the

following figure.

21
 Explain：

 The device connection status is green for online devices and red for offline devices.

3.1.3 Modify

Operation steps:

1. Check the device to be modified in the added device list, and click the [Modify] button to

pop up the [Modify Device] window, as shown in the following figure.

22
2. Click the "Modify" button to show "Modify Successfully".

Notice：

 Only one device can be modified at a time.

3.1.4 Delete

Check one or more devices to be deleted in the list of added devices, click the [Delete] button

to enter the [Device Delete] interface, and select [OK] to delete them successfully.

3.1.5 Invert Selection

In the list of added devices, check one or more devices that do not need to be operated on

the current page, click the [Invert Selection] button, and select all devices except those in the

currently selected range to perform the [Invert Selection] operation on the selected devices.

23
3.1.6 Refresh

Click the [Refresh] button in the [Device List] to refresh the information of all devices on the

current interface.

3.2 Decoding device

All operations are the same as the coding equipment management. Refer to 3.1 Coding

Equipment.

3.3 Group

In the [Device Management] interface, enter the [Group Management] interface, as shown in

the following figure.

The interface parameters are described as follows:

Parameter Instruction

Set the channel name on the local device tree synchronously to the front-
Sync to device
end channel.

24
Get Device Name Get the front-end channel name of on-line channel in Device list.

Get alarm port Obtain the alarm input and output information of IPC and NVR equipment.

Tick and select a Customized list group, click to delete the group and
Delete Group
delete the sub-groups and channels in the group at the same time.

Tick and select the channel in left Device list, select a group in right
Import
Customized list, click to import the device to the customized device list.

Tick and select the channel in Customized list group, click to export that
Export
channel.

Quick search of channel name, input key information and the channel

name including that key information will be displayed in Device list and

Customized list.

Sync to device, move the mouse to Device list channel node, click

synchronize the channel name to the front-end channel.

Get the name, move the mouse to Device list channel node, click to get

the front-end channel name of single channel.

Modify channel name, move the mouse to Device list channel node, click

（in Device list） to modify the channel name

Upon acquiring the alarming port information of the present equipment list

（in alarm list） channel, click to modify the name, No. and descriptions of alarming port.

Add group, move the mouse to Customized list group, click to add the

sub-group of the group.

Modify watch point group, move the mouse to Customized list group, click

25
 （in Customized list） to modify the name of the watch point group

Delete group, move the mouse to Customized list group, click to delete
（in Custom List
the group, and delete the sub-groups and channels in the group at the
Grouping）
same time

Explain：

 The information in the [Equipment List] is the information of all the added encoding equipment and

their channels automatically generated by the system.

 [User-defined list] User-defined grouping information.

 Users can add the encoding equipment and its channel in [Equipment List] to [Custom Group]

according to their own needs, which is convenient for users to manage.

3.3.1 Add device to custom groups

For example, add all channels of the device 192.168.14.68 in [Device List] to the custom

group [Test Group] in [Custom List].

Operation steps:

1. Check all channels of 192.168.14.68 in [Device List].

2. Select (highlight) the custom group to be added in the [Custom List], as shown in the

following figure.

26
3. Click "Import" to void and add lines.

Explain：

 Select the corresponding device channel in the [Custom Group], and click the [Move Out] button to

delete the device channel from the custom group.

 All modules except the device management module load the custom device list, and the user needs

to add the device to be used to the custom list.

3.3.2 Modify the channel name

In [Device List], slide the mouse to the corresponding channel name and click " " to modify

the channel information and set the decryption password of the encrypted channel, as shown

in the following figure.

27
The interface parameters are described as follows:

Parameter Instruction

Name Modify the name of the current channel.

Type Support channel and bayonet.

Modify the connection mode to support TCP, MCAST (RTSP) and

Connection mode
MCAST (SRTP).

Default decryption password Set the video channel encryption password here.

3.3.3 Get and modify the device alarm port

Operation steps:

1. Select the corresponding device in the [Device List], and click the [Obtain Alarm Port]

button. The alarm port will appear under the device, as shown in the following figure.

28
2. Select the corresponding alarm port and click " " to pop up the [Modify Alarm Port]

window, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Obtain the information about the present alarming port and support two
Type of alarming port
types of ports, i.e., alarm input and alarm output.

Name of alarming port Name of alarming port can be self-defined.

The No. of alarming port can be self-defined (ensure port No. cannot be
No. of alarming port
repeated).

Obtain name of the present host automatically. Modify host name by

Host name
Equipment-> Coding device -> Modify.

Host IP Obtain the IP of the present host automatically

Descriptions of alarming For encrypted channels, the default is to use the set decryption

29
 port password for decryption.

3.3.4 Modify group

Select the list grouping in [User-defined Grouping], and click " " to pop up the [Modify

Monitoring Point Group] window, as shown in the following figure.

3.3.5 Delete group

Check the list grouping in [Custom Grouping], and click "Delete Grouping" to pop up a

confirmation box. After confirmation, you can delete the grouping. Multiple selections or all

selections can be deleted, as shown in the following figure.

30
4 Live view

View the real-time picture of the monitoring point, and perform live service operation on

the monitoring point.

4.1 Custom Device List

Select [Custom Device List] to display all custom grouping lists, and enter information in the

[Search Box] to fuzzy search the corresponding channel or port, as shown in the following

figure.

4.1.1 Customize the device list with the right-click menu

Right click on [Custom Device List] to pop up a right-click menu, as shown in the following

figure.

The related Parameters are described as follows:

Parameter Instruction

Turn off all videos Turn off all videos connected at that moment.

31
 All the videos in current list are added and played in main code stream

Main code stream mode (as for the channel being played, the playing code stream will not

be changed)

All the videos in current list are added and played in subcode stream

Subcode stream mode (as for the channel being played, the playing code stream will not

be changed)

Time calibration Conduct time calibration on on-line devices in all group lists.

Manual alarm Cancel the current alarm in the channel in video manually.

4.1.2 Device grouping right-click menu

Select a group in Device list and click right key, the right key menu of device group list will

pop up, as shown in below figure.

The related Parameters are described as follows:

Parameter Instruction

Turn off all videos Turn off all videos connected at that moment.

Turn off this video Turn off all videos connected in current group.

Added to the list of switch

Add selected encode device to automatic switch group list.
groups

Main code stream All the videos in current list are added and played in main code stream

32
 mode (as for the channel being played, the playing code stream will not

be changed)

All the videos in current list are added and played in subcode stream

Subcode stream mode (as for the channel being played, the playing code stream will not

be changed)

Time calibration Conduct time calibration on on-line devices in selected group lists.

Manual alarm Cancel the current alarm in the channel in video manually.

4.1.3 Device channel right-click menu

Select a channel watch point of a device in device list group, click right key, the right menu

of device list will pop up, as shown in below figure.

The related Parameters are described as follows:

Parameter Instruction

Collect Add the channel to [Favorites].

When the device is in the soft shutdown state, click Soft Startup to start
Soft boot
the device. Suitable for low power consumption series products.

33
 When the device is powered on, click Soft Shutdown to shut down the
Soft-off
device. Suitable for low power consumption series products.

Login to the affiliated host Right click on the device channel to restore the connection between the

computer device host to which the channel belongs and the platform.

Log off the affiliated host Right click on a device channel to disconnect the device host to which

computer the channel belongs from the platform.

Turn off all videos Turn off all videos connected at that moment.

In the channel of login encode device, click this button to connect the
Main code stream
main code stream video of the channel.

In the channel of login encode device, click this button to connect the
Subcode stream
subcode stream video of the channel.

In the channel connected to video, click this button to disconnect the

Video interruption
video of the channel.

In the channel of login encode device, click this button to talk to the video

source of the channel. Click this button in the channel of DVR/NVR

Start intercom device, the intercom box "Talking to XXXX" will pop up to start talking

with DVR/NVR; click this button in the channel of IPC device, the

intercom box "Talking to XXX" will pop up to start talking with IPC device.

In the channel of login encode device, click this button to stop the
Stop intercom
intercom with video source of the channel.

Time calibration To conduct time calibration on this on-line device.

Change channel name Change the name of currently selected channel.

34
 Manual alarm Cancel the current alarm in the channel in video manually.

4.1.4 Alarm entry port right-click menu

Select the corresponding alarm input port in the group in [Device List], and right click to pop

up the context menu of the alarm input port, as shown in the following figure.

The related Parameters are described as follows:

Parameter Instruction

If the equipment alarm inputs alarm, click “Manual alarm cancellation”

Manual alarm cancellation
to clear the alarm in process.

4.1.5 Alarm output port right-button menu

Choose one alarming output port in group in the equipment list, click the right key and the

right key menu of equipment list will pop out, as shown in the figure below.

The related Parameters are described as follows:

Parameter Instruction

Open/close alarm output Control the on/off status of alarm output port.

4.2 Video preview window

The right side of the [Video Preview] interface is the video preview window. Double-click

to maximize it. Double-click again to restore it. When the main video is previewed, the split-

35
screen window supports self-adaptation according to the number of linked videos, and

supports real-time video playback by devices added in various ways.

The target bar below the main video can display face information, age, gender, whether

to wear a mask, whether to wear glasses and body temperature. The target bar on the right

side of the main video shows similar results compared with the face database (strangers are

not displayed), as shown in the following figure.

4.2.1 Video preview window displays the information

When the video is previewed, the lower left status bar of the video supports closing the

video, audio preview, snapshot video and instant playback.

The channel name can be displayed in the lower left corner of the main video screen.

When the alert is turned on, the alert icon is displayed in the upper right corner of the video

window. When it is turned off, the alert icon is cancelled.

36
Low-power battery series products can display the battery level and the playing time in the

upper left corner of the screen, as shown in the figure below.

Click the battery icon to pop up the [Battery Management] interface to switch the power mode

of the device, as shown in the following figure.

37
4.2.2 Video preview screen toolbar

When browsing the main video preview, the operation functions of the main video interface

can be displayed in the lower toolbar of the main video screen, as shown in the following

figure.

The toolbar icons in the video preview interface are described as follows:

Icon Instruction

Capture all, to capture windows of all connected videos at current

screen.

Start all recording, record windows of all connected videos at current

screen.

38
Intercom list, display current intercom status.

3D control, adjust the scene to be monitored to the video center through

mouse click control. Specific operations:

1. Left click on the monitoring video screen and move the corresponding

point to the center of the video;

2. Hold down the left button and pull down a rectangular area to the right,

then move the center of the designated area to the center of the video

and zoom in;

3. Hold down the left button and pull out a rectangular area to the top

left, then move the center of the designated area to the center of the

video and zoom out to view it.

Electronic zoom-in. After this function is enabled, select the channel

picture and slide the mouse wheel to zoom in the picture. After zoom-in,

drag the picture. After dragging to a certain part of the picture, you can

continue to zoom in.

Connection status. Shows/does not show how the channel is connected.

Save view and the user can save the current information.

Rotating display plan, allow users to set their own switch mode, so that

software can automatically switch video channels on [Real-time

preview] interface for users’ convenient browse.

Start rotating display, automatically switch video channels to preview

39
 according to rotating display plan.

Group switching list, click this button to display group switching list.

There will have devices in the list only when right click the device group

in customized device list of device list on the left to select and add

devices to [Add to group switching list].

Last group, which supports the manual switch group to switch the last

screen of group.

Start/Stop group switching, open video window, click this button to

conduct group switching; click again to stop group switching.

Next group, which supports the manual switch group to switch the next

screen of group.

Set number of video views, click and the setting menu of displayer will

pop up.

Full screen, click to display video window at full screen. Click ESC button

or right click the video to cancel full-screen display to escape from full-

screen model.

Indicate that the video connecting status is direct connection

The video is currently experiencing an alarm.

Turn off the video, i.e. disconnect the connection of present video.

/ Turn on audio / Turn off audio

Screen capture, capture the picture of the present video。

Turn on tape recording / turn off tape recording

40
 Instant replay, which supports timely view of present playback based on

demands. The time of instant replay can be modified according to

System settings -> Video-related -> Time of instant playback.

Return to preview to exit the page of instant playback.

4.2.3 Video preview window right-click menu

Operation steps:

Right-click the main video browsing window to pop up the right-click menu of the video

preview window, as shown in the following figure.

The related Parameters are described as follows:

Parameter Instruction

Click on the single video window of connected video to turn off the video
collect
in the window.

Click on the single video window of connected video to listen to the audio
Turn off the video
of video channel in the window.

41
 Click on the single video window of connected video to take snap shot
Audio pre-view
of the window.

Adjust the video's aspect

Electronic amplification and fast ball 3D control are available.
ratio

Click on the single video window of connected video to turn off the video
control
in the window.

Electronic amplification Same as the icon of the video preview window toolbar“ ”。

Fast ball 3D control Same as the icon of the video preview window toolbar“ ”。

Switching of main code and Auto switch between main code and subcode streams. Support

subcode streams simultaneous switch among native video.

Set the display parameter of currently selected video: brightness,

Video parameter
contrast, saturation and Hue.

Time calibration Conduct time calibration on the on-line device.

Change channel name Change the name of currently selected channel.

Full screen Display video view window at full screen.

Manual alarm Cancel the current alarm in the channel in video manually.

Device support is required. See 4.11 Fisheye Deployment Function for

fish eye expanslon
details.

Device support is required. The watermark can be displayed on the video

Watermmark
interface.

42
4.3 Cruise Plan

The main function of the polling plan is to allow users to set their own switching mode, so that

the platform can automatically switch video channels in the [real-time preview] interface,

which is convenient for users to browse.

Operation steps:

1. Add a view. After configuring the split-screen scheme and the video to be played according

to the above operations, click the " " button in the toolbar of the preview interface and enter

the customized [view name] to save the view, as shown in the following figure.

2. Add a polling schedule. First, click the view bar on the left, select the view to be added,

and then right click to pop up the right-click menu, and select [Add to polling plan] in the menu,

as shown in the following figure.

3. Set the polling schedule. Click " " in the toolbar of the preview interface at the lower

right corner to enter the interface for setting the polling plan, as shown in the following figure.

43
4. Enable/disable the polling plan. Click the " " button in the toolbar of the preview

interface at the lower right corner to enable the polling plan, and click again to close the

polling plan.

4.3.1 Modify the cruise intervals

Check the view to be modified and click the [Modify] button to change the polling interval, as

shown in the following figure.

4.3.2 Delete view

Check the view to be deleted and click [Delete] to delete the view, as shown in the following

figure.

44
4.3.3 Move view

Operation steps:

Check the view to be moved and click the [Move Up]/ [Move Down] button to adjust the

view playback order.

4.4 Group switch set

Operation steps:

1. Create a group cut. Right click the group in the [Custom Device List] column, and click

[Add to Switch Group List] to create a group switch and pop up a prompt box, as shown in

the following figure.

2. Set up group cuts. Click the " " button in the toolbar of the preview interface at the lower

right corner of the main video to set the group switching time interval and the number of group

split screens, as shown in the following figure.

45
 Notice：

 Set the time interval of group cutting: set the time interval of group cutting on the upper part of the

interface, and the value range of the time interval is 30 ~ 3600 s.

 Set the number of split screens, support-×-screen (do not change the number of split screens, keep

the original number of split screens), 1 × 1 screen, 2 × 2 screen, etc.

4.4.1 Modify number of components

Operation steps:

1. Click the [Modify] button to enter the interface for setting the number of split screens.

2. Double-click the number of split screens in the group to enter the interface for setting the

number of split screens, as shown in the following figure.

46
4.4.2 Open/close group switch

Click the " " button in the toolbar of the preview interface at the lower right corner of the

main video to open the group cutting, and click again to close the group cutting.

4.5 Target information

Below and on the right side of the main video interface of the real-time preview, the

information of the identified person and the information in the comparison face database are

displayed respectively, as shown in the following figure.

Explain：

 Target information can identify the age, gender, whether to wear masks, whether to wear glasses,

temperature detection and detection time of personnel in real time.

 At the same time, it can identify whether the person is a person in the face database, if so, it will be

compared with the picture uploaded in the face database, and the similarity, the name of the person and

47
the detection time will be displayed.

 If you want to view the previous records, you can switch to [History] to view the history information.

4.6 Favorites

Operation steps:

1. Collection Channel. Right click the channel menu under the grouping in the [Device List]

column and select Favorite, or right click the currently playing screen and select [Favorite] to

collect the channel.

2. View favorite channels. Select [Favorite] in the drop-down box on the upper left to see the

favorite channels, as shown in the following figure.

4.7 View

Select [View] in the drop-down box on the upper left to display the currently saved view.

Double-click to preview the view information. Right click the list view node menu to pop up

an interface, as shown in the following figure.

48
The related Parameters are described as follows:

Parameter Instruction

Name change Click to change view name.

Add to the regular rotating

Click to add the view to the regular rotating switch plan list.
switch plan

Delete Click to delete this view information node from view list.

4.8 PTZ Control

Expand the [PTZ Control] list on the left side of the interface to display the PTZ operation

interface. The PTZ control can control the PTZ speed, preset position, etc., as shown in the

following figure.

The cradle control icon is described as follows:

Icon Instruction

8-direction key, press corresponding direction key to control PTZ to

rotate in the direction accordingly; the center button is scan shortcut

key.

/ Zoom control button, press " " to control the device to perform zoom-

49
 out operation, the field of view angle becomes larger and the scene

becomes smaller; press " " control device to perform zoom-in

operation, the field of view angle becomes smaller and the scene

becomes larger.

Focus control button, press " " to control the device to perform

focusing-in operation, the near scene is clear and the far scene is fuzzy;
/
press " " to control the device to perform focusing-out operation, the

far scene is clear and the near scene is fuzzy.

Aperture control button, press " " to control the device to perform

/ aperture reduction operation, press " " to control device to perform

aperture enlargement operation.

The slider can adjust the rotation speed of the device.

Set the preset number for calling.

Call the preset. Select saved preset, click to call and the screen will

jump to the preset part.

Set the preset. Select the preset number to be saved, adjust the screen

to the preset to be saved, click Set to save this position.

Click to expand or hide advanced features. Advanced features include

lights and wipers, which can be switched on and off.

4.9 Unlocks the encrypted channel function

The video can be played normally by entering the correct password in the prompt box for

50
entering the password in the playback screen, as shown in the following figure.

4.10 Fish eye unfold

Operation steps:

1. Right click and select [Fisheye Expansion] during video preview, or click the " " icon in

the menu bar at the lower left corner of the video screen to pop up the [Fisheye Expansion]

window.

2. There are three installation methods, which are "installation", "wall installation" and

"ground". As shown, the following is "installation".

51
3. In the [top installation] installation mode, the display mode is to select [fisheye + 3ptz] as

an example, and the rest is similar to this operation. The left screen in the small window is

the fisheye screen, and the remaining areas are the other three screens. In these areas, the

screen can be enlarged. After selecting a specific area, the screen can be dragged by using

the PTZ control. You can control the speed of the drag by controlling the speed bar. Click "

" in the PTZ control, and the selected screen will cruise according to a certain track.

4. The remaining display modes are the same as the [fisheye + 3ptz] operation.

4.11 USB keyboard control

Operation steps:

1. Connect the keyboard to the computer and click the connection status icon to display the

instruction manual, as shown in the following figure.

2. Click the Debug button to debug the keyboard, as shown in the following figure.

52
3. Use the keyboard to control the preview operation according to the instructions.

53
5 Video playback

Search and play the video file of the monitoring point, and perform playback service operation

on the monitoring point.

5.1 Video query

Operation steps:

1. In the [Video Playback] interface, click the monitoring point on the left to set the query time

range, as shown in the following figure.

2. After selecting the condition, click the query button to display the query result prompt box,

as shown in the following figure.

3. Click [Query Result] below to see the current result, as shown in the figure below.

54
 Explain：

 For more accurate query, you can click the [More] button to set the storage location and code stream

type filter conditions for query. Click the [More] button again to hide the detailed filter conditions.

 Select the time range. On the time range start calendar, select the start time. On the end time calendar,

select the end time.

 When the storage location is selected as front-end storage, the following code stream types can be

selected, and two code stream types of main code stream and sub-code stream are supported.

 The query result will be displayed on the progress bar after the query result is obtained, which can be

played back by clicking the time point on the progress bar.

 Synchronous playback is supported, and four-way synchronous playback is supported at most.

5.2 Video playback

Play mode 1: Click [OK] in the query result prompt box to play back the first video file of the

55
query result.

Playback mode 2: Select a video file in the query result and click " " in the operation bar to

play back the file.

Playback mode 3: Select a playback window and directly click the time point on the timeline

to play back from that time point.

5.3 Playback control

In the video playback interface, display each function key in the playback control menu bar.

The playback control menu is shown in the following figure.

The icon function is described as follows:

Icon Instruction

On/off synchronous playback; asynchronous playback is set by default.

Click to enter synchronous playback mode and click again to exit it. Note:

Synchronous playback not supported for local video.

Slow forward button, click to make the video file play slowly.

Note: as for the equipment added by P2P direct connection, click the

“slow play” button to slow from 4x to 2x and from 2x to 1x. 1x speed is

the slowest. 1/2 speed is not supported.

Fast forward button, click to make the video file play quickly.

Note: the equipment added by P2P direct connection supports 4X speed

playing at most.

/ Play/Pause button, click to control the start/pause of video file.

56
 Step forward button, click to make the video file play frame by frame.

Stop button, click to stop the playback of current video file.

Capturing button. Click it to capture the video file that is selected and

being played.

Video clip button: click it to start video clip and click it again to finish that.

The time axis of clipped section will become red and the target section

will be saved. The format of video saved can be modified by setting

“ system settings -> video -> download video format ” ; three formats

sdv ,mp4, and avi are available.

Set screen number button, click to pop up the menu of playback window

split screen.

1×1 screen playback supported, click and the video playback window will

display in single screen.

Same as " " in real-time preview 4.2.1.

Volume adjustment bar, drag to adjust the sound of video playback. Click

on the horn to turn sound on/off.

/ Used to adjust the accuracy of time axis.

Display the current control window number.

Video type filter button, click to filter the video time axis type, and the time

axis of unselected video type will not be displayed. The filter of all types,

alarm recording, timing recording and manual recording is supported.

57
5.3.1 Replay window right-click menu

Right-click the video playback window to pop up the right-click menu of the playback window,

as shown in the following figure.

The related Parameters are described as follows:

Parameter Instruction

Stop playback Click to stop the playback of current video.

Snap shot Click to snap shot of selected playback window.

Change channel name Click to change channel name of selected playback window.

Click to display the playback window at full screen. Click again to turn off
Full screen
full screen display.

Device support is required. See 4.11 Fisheye Deployment Function for

fish eye expanslon
details.

Device support is required. The watermark can be displayed on the video

Watermmark
interface.

5.4 Video download

There are two ways to download videos: download by file and download by time period.

58
5.4.1 Download by file

Operation steps:

1. Batch download. Click the query result in the [Video Playback] interface to pop up the

query result interface. After checking multiple video files, click the [Download] button to

download them in batches, as shown in the following figure.

2. Select [Download List] to enter the export progress list interface to view the progress of

downloaded files, as shown in the following figure.

3. Stop the export. Select the file to be exported in the export progress list, right click the file,

59
and select [Stop Export] to stop downloading the file, as shown in the following figure.

4. Re-export. Select the file to be re-exported in the export progress list, right click the file,

and select [Re-export] to re-export the file for download.

5. Clear the record. Right-click a file in the export progress list and select [Clear Record] to

delete the downloaded record.

6. Clear all. Right-click a file in the export progress list and select [Clear All] to delete all

download records in the list.

Notice：

 When downloading video files, only one video file can be downloaded at the same time.

5.4.2 Download by time period

Select the channel you want to download through the drop-down menu or by clicking the

channel in the tree list, select the time period you want to download, and then click the

[Download by Time Period] button.

5.5 Recently browse

Record the recently viewed video. Click the query result in the [Video Playback] interface to

pop up the query result interface. Click [Recent View] to quickly preview, as shown in the

60
following figure.

5.6 Fish eye unfold

See the real-time preview 4.10 fisheye expansion function for details.

61
6 System configuration

Configure common client operations.

6.1 Common Settings

Click [Common Settings] in the [System Settings] interface to display the function items of

[Common Settings], as shown below.

The interface parameters are described as follows:

Parameter Instruction

Tick and select, after fill in correct [User name] and

[Password] by users, the software will realize

Login Settings Automatic Login Software
automatic software login function when the operation

system starts.

62
 The save path of capture, preview and playback
Save path of capture photo
Path Setting photo.

Video Download Save Path The save path of video download.

Set the language of software system, effective after

Language
restart.
System
Set the skin of software system, effective after
Skin
restart.

Backup: Backup all configurations, devices, etc. Of

the current program. Restore: Import the backup file

to restore the program to the state when it was

backed up. Scheduled backup: backup operations

are performed on a scheduled basis. Restore factory

Data backup path settings: restore factory settings. Rebuild index:

scan all disks of the computer where the stand-alone

Data backup
version is located, and automatically generate

records and save them to the database after finding

the files saved by the stand-alone version (such as

intelligent analysis pictures, manual video files, etc.).

Import/export relevant configuration information with

Configuration one key, such as equipment list, user authority and

electronic map.

Log Settings Period of keeping operation Set the save time of each operation log.

63
 log

Period of keeping alarm log Set the save time of each alarm log.

Restore the configuration of current page to the

Restore Default
configuration information when initially installed.

6.2 Video Settings

Click [Video Related] in the [System Settings] interface to display the [Video Related] function

item, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Automatically restore the

The video connected to video preview, when turns on the software again,
state last time you exit from
the video before turn-off will restore connection.
the system

Switch between Main and Set switching screen number, when the number of windows displayed in

64
 Sub Streams, Automatic the client-side video browsing interface is greater than the number of split

Switching Screen Number screens, the connected channel video will default to the subcode stream.

Manual Default Connection Set the code stream type of default play.

Available to set Good fluency/Minimum delay. Take effect after replaying

Play property setting
video.

Software decode and hardware decoding are supported, effective after

Decoding mode setting
restart. Take effect after reboot.

The download recording may set SDV (private format) ,MP4 (general
Video download format
format) and AVI format.

Show or conceal frame rate on preview screen. Take effect after

Preview frame rate
accessing video again.

Automatically restore the

The video connected to video preview, when turns on the software again,
state last time you exit from
the video before turn-off will restore connection.
the system

6.3 Storage management

Click [Storage Management] in the [System Settings] interface to display the function items

of [Storage Management], as shown in the following figure.

65
The interface parameters are described as follows:

Parameter Instruction

Continuous recording time Set the time of continuous recording (recording packaging), the time

(min) range is 5~120 min.

SDV format , mp4 format and AVI format are supported for recording
Record format
storage.

Type of record streaming Main code stream and minor stream supported.

Supported to set by percentage (%) or by space (G), fill in

Min. disk space
corresponding parameter in the text box below.

Supported to select and delete the earliest local recording or stop

Disk full
recording.

Storage location Set the storage location of files.

66
6.4 Intelligent application

In the [System Settings] interface, click [Smart App] to display the function items of [Smart

App], as shown in the following figure.

Explain：

 After the smart application is enabled, it can receive face and human gate pictures, and the

retention time of snapshot pictures can be defined according to the needs.

 After the deletion strategy is checked, this strategy can be executed after the upper limit of the

storage time of passenger flow (which can support 6 ~ 24 months) is reached.

6.5 Record plan

Click [Video recording plan] in [System setting] interface to display the function item of [Video

recording plan], as shown in the following figure.

67
The interface parameters are described as follows:

Parameter Instruction

Enable local recording

Check the box to enable the local recording schedule.
schedule

After selecting a device from [Custom Device List] on the left, the
Channel name
corresponding channel name appears.

Code stream types Support main stream and sub stream.

Full-cycle templates and custom templates are supported. Custom

Time template templates can be set by clicking the " " icon on the right or

dragging the blue slider.

The recording plan configuration of the current channel can be

Copy to
copied to other channels.

Recover Click to restore the settings before the change.

Save Click to save the current configuration.

68
7 Alarm management

Real-time display of equipment alarm information, timely understanding of equipment

abnormalities.

7.1 Real-time alarm

Click the [Real-time alarm] option in the [Alarm management] interface to display the real-

time alarm list in the lower area, as shown in the following figure.

Premise:

The device has a storage medium (such as SD card), and is configured with alarm recording

and alarm capture, and the picture receiving function is enabled in the client [System Settings-

Smart Application].

Operation steps:

Double clicking on an alarm record can display alarm information, alarm recording, and alarm

capture in the details section on the right; If the alarm device does not have storage media,

69
the alarm information and real-time video will be displayed in the details on the right.

7.2 History alarm

Click the [Historical Alarm] option in the [Alarm Management] interface to display the real-

time alarm list in the lower area, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Starting time Available to set the starting time of history alarm query.

End time Available to set the end time of history alarm query.

You can set the alarm type for querying historical alarms and select it
Alarm type
from the drop-down menu.

Available to set the source of alarm of history alarm query, search by key
Source of alarm
word supported.

Available to set the checking status of history alarm query, including all,
Status check
unchecked and checked.

User check Available to set the checking user of history alarm query

70
 Query Click to search history alarm information conforms to search condition.

Reset Click to restore to default query condition.

Tick and select alarm records need to be checked, click to fill in handling

Check suggestion. Update verification status, verify users, verify real-time, and

process comments after verification.

Output Click to output query results to local device.

Tick and select filter level, the selected level will be displayed in the list,
Filter level
nothing will be displayed if on level selected.

Click to play the video 10s before and after the time of alarm, if there’s
Play
no video, real-time preview will be displayed.

Starting time Available to set the starting time of history alarm query.

71
8 TV Wall

Video wall configuration and preview.

8.1 Create layout

Operation steps:

1. After entering the interface, if the TV wall is not configured, select the [Go to Configuration]

option to enter the TV wall configuration interface, as shown in the following figure.

2. Set [TV Wall Name], select [TV Wall Type] and [TV Wall Layout], and click [Save] to

generate the layout, as shown in the following figure.

72
 Explain：

 [TV wall type] There are two types of LCD and LED, which can be selected according to the display

used.

 [TV wall layout]: Support the setting of 1 * 1 ~ 8 * 8 pictures.

8.2 Bind decoding

Operation steps:

1. Add a decoding device on the left side of the interface, as shown in the following figure.

73
 Explain：

 You can also add a decoding device in the [Device Management] interface.

2. Drag the decoder channel into the layout screen, as shown in the following figure.

3. After selecting the bound output channel, click [Resolution Setting] in the lower left corner

of the interface to set the resolution for the channel, as shown in the following figure.

74
 Explain：

 Set the resolution to the width and height of a single screen, ranging from 240-1920 in width and 240-

1080 in height.

4. Press and hold the left mouse button and slide to select the bound output channel, and

then click [Merge] in the lower left corner of the interface to merge the selected channel into

one output channel, as shown in the following figure.

Notice：

 Only output channels of the same decoder can be combined.

75
 Merging into regular rectangles is only supported.

5. Click [Cancel merge] to cancel the merging of output channels.

The other parameters of the interface are described as follows:

Parameter Instruction

Display offline channels Display information about channels that are not online

Display the last frame After the network is disconnected, the last frame of the channel is

connected retained.

Clear To clear all the image channels.

8.3 Scene generation

Operation steps:

1. Click [Add Code] in [Coding Equipment List] on the left of the interface to add coding

equipment, as shown in the following figure.

Explain：

 The coding equipment added in [Equipment Management] will be displayed in [Coding Equipment List]

76
on the TV wall interface.

2. Set [scene name] and code stream.

3. Drag the encoding device channel into the layout screen to complete the binding, as shown

in the following figure.

4. Select a binding channel and click the " " icon in the lower left corner to view the channel

information, as shown in the following figure.

5. Click the " " icon in [Coding Equipment List] to set the decryption password or modify the

polling time for the channel, and click the " " icon to save, as shown in the following figure.

6. Click the " " icon in [Coding Equipment List] to unbind the channel.

The other parameters of the interface are described as follows:

77
 Parameter Instruction

Display video Check it to display the video image of the bound channel.

Check it to bind multiple encoding device channels in the same screen

Append mode
and automatically switch according to the polling time.

Clear Remove (delete) all bound encoding device channels.

After selecting a channel, you can divide the output channel into

multiple screens. Each screen supports binding to one encoding device

Split
channel and supports 0-16 split-screen screens. 0 screens means

disabling the output channel.

8.4 Preview & Wall up

Operation steps:

1. Click on "Start Preview" to start previewing the video images of each channel in the current

scene, and click on "Stop Preview" to stop the current preview, as shown in the following

figure.

78
2. Click on "One-click wall mounting" to send the current scene configuration to the bound

decoder.

3. The control of the pan-tilt unit is the same as that in Chapter IV 4.8 PTZ control.

79
9 Vehicle management

Vehicle management is used for entrance and exit control of parking lot or set area,

mainly for information registration and access control of black and white list vehicles and

temporary vehicles.

9.1 Region creation

After entering the interface, if the area is not configured, select the [Go to Configuration]

option to enter the area configuration interface, as shown in the following figure.

9.1.1 Basic Information

Operation steps:

Fill in [Basic Information], set the detention duration and area creation, and click [Save]

to generate an area, as shown in the following figure. After saving, it will jump to the entry/exit

setting interface.

80
The interface parameters are described as follows:

Parameter Instruction

Vehicle detention time. 4 default durations can be set. Click to select and
Detention duration
switch to the corresponding duration

Support equipment timing setting, and perform timing immediately or

Equipment timing
automatically.

Reqion Name Fill in the area name

Regional Address Not required, set the area address

Responsible person Not required, set up the area responsible person

Telephone Not required, set up the area responsible person telephone

Total number of
Set up the total number of parking Spaces
parkina spaces

Display the parking space status icon in the area preview interface after
Full space reminder
opening

81
 Remarks Not required

9.1.2 Entrance/Exit Settings

Operation steps:

Set the entry and exit, and add and delete operations. At most one video device can be

added to each entrance or exit, and at most four entrances or exits can be added, as shown

in the following figure. After saving, it will jump to the on-duty management interface.

Explain：

 Click " " to add an entry or exit, or click " " to delete an entry or exit.

 Click " " to add a video device, and click " " to delete a video device.

 The bayonet equipment is used to monitor the entrance and exit equipment, and the video equipment

is used to monitor the bayonet equipment and around the gate. Please determine the installation location

of the equipment when using it.

82
9.1.3 On duty management

Operation steps:

1. Set the on-duty account and on-duty team members, as shown in the following figure.

2. Click the [Add] button under the on-duty account to add an on-duty account and assign

permissions. The account will be added to the ordinary user of the stand-alone version

synchronously. By default, the name of the on-duty team will be set in order, as shown in the

following figure.

83
3. The on-duty account can be edited and deleted, and the name of the shift team can be

modified, as shown in the following figure.

4. Click the [Add] button under the duty member to add a duty member to the duty group, as

shown in the following figure.

5. You can edit and delete the on-duty members, and modify their names and phone numbers,

84
as shown in the following figure.

6. Click [Next] to enter the black and white list interface.

9.1.4 Black and White List

Operation steps:

1. Set the black and white license plate library as shown in the following figure.

2. Click [Add Whitelist] to add a white license plate library, as shown in the following figure.

85
3. Click the icon next to the whitelist library to edit the name and delete the whitelist library,

as shown in the following figure.

4. Click the [Add] button to add white license plate information, as shown in the following

figure.

5. Click " " on the right side of the interface to export the white license plate template, as

shown in the following figure.

6. Click the [Import] button to import the white license plate file and import the white license

plate information in batches.

7. Click the [Export] button to export the white license plate library information.

86
8. After entering the keywords, click [Query] to query the white license plate information.

9. Click the [Synchronize] button to synchronize the white license plate information to the

exit/entrance.

Explain：

 To use the synchronization function, the license plate library needs to be bound to the entry/exit first.

10. The interface and operation of the blacklist are basically the same as the whitelist.

11. Click [Next] to enter the area binding interface.

9.2 Region binding

Bind the bayonet and video for the entrance/exit, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Name In/out name port.

87
 For exit or entrance, click [Details] to jump to the [Exit/Entrance Setting]
Type
interface.

Select the added bayonet device for binding, or click " " to pop up the
Bayonet device
automatic search interface, and add the bayonet device for binding.

Select the added video device for binding, or click " " to pop up the
Video device
automatic search interface, and add a new video device for binding.

Select the blacklist license plate library and click [Details] to jump to the
Blacklist
[Blacklist and Blacklist] interface.

Select the white list license plate library and click [Details] to jump to the
Whitelist
[Black and White List] interface.

Set the traffic mode for temporary vehicles that are not in the black and

white list.

Manual registration: temporary vehicle parking is required, and the

Mode of passage
information is manually registered.

Automatic registration: No need for temporary vehicle stop, automatic

registration of information.

Select the duty team. After selection, the list of duty team members will
On duty team
be displayed in the blank box.

Explain：

 The binding bayonet device shall be used after the relevant algorithm is configured.

 The operation of the entry/exit binding is the same.

 The bayonet devices bound to the entrance/exit cannot be the same.

88
 Click [Save] to automatically jump to the [Area Preview] interface.

9.3 Area Preview

Preview the entrance and exit of the setting area, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

When the administrator user admin is used to log in, the duty group is not

On duty team displayed; when the ordinary user is used to log in, the duty group of the

on-duty personnel is displayed.

Total parking
Displays the total number of parking spaces set when the area is created.
space

The remaining available free parking spaces are displayed, and all

Remaining registered and released vehicles (including temporary vehicles and white

parking spaces list vehicles) entering the area will occupy the parking spaces, and will

not occupy the parking spaces after leaving the area.

89
 Enter a dwell time, such as 24 hours, to view the number of vehicles that
Parking vehicles
have been there for that time.

Show whether the parking space is

Parking space status
full.

The real-time pictures of the entrance/exit bayonet equipment are

displayed respectively. In the following four pictures, the leftmost picture

displays the video equipment picture bound with the entrance/exit, and
Entrance/Export
the three right pictures display the license plate photos captured by the

bayonet equipment. The photo size needs to be set in the web interface

of the bayonet equipment.

The vehicle registration information is divided into two parts. The upper part is the real-

time license plate registration information, which can be used to register and release the

current vehicle (lift the pole) or prohibit the passage (do not lift the pole). The lower part is

the license plate registration information record, which can be used to classify and filter all

information, entrance information, exit information and unprocessed information, as shown in

the following figure.

Operation steps:

1. Select different categories to view different vehicle information.

2. Click [Details] to jump to the [Record Center] interface to view the information of the record

90
and operate it, as shown in the following figure.

3. Click the record center interface [Details] to pop up the vehicle details interface, where you

can view the vehicle information and snapshot pictures, as shown in the following figure. In

this window, you can click Edit to manually modify the vehicle information, or add the vehicle

to the black/white list.

4. After exiting the details pop-up window, return to the [Record Center] interface to add the

vehicle to the black/white list or delete the record.

5. In the [Record Center] interface, you can also query all the vehicle registration information

in the area. Select the area, entrance, exit and other information, and click [Query] to view all

the vehicles that meet the requirements, as shown in the following figure.

91
6. Click [Reset] to reset the query criteria.

7. Check two pieces of data and click [Merge] to merge the two pieces of data into one.

Notice：

 Requirements for merging two pieces of data: the two records shall be the same license plate in

the same area, and one is the entry record and the other is the departure record, and the time of the

departure record shall be longer than that of the entry record.

92
10 Face recognition

Management and distribution of face database.

10.1 Face database management

10.1.1Face database addition/modification/delete

Face database add operation steps:

In [Face Database Management], right click [Face Database List] and select [Add] to create

a new face database, as shown in the following figure.

Notice：

 The face library name is unique.

Face database modify operation step:

Right click the name of the face library to be modified, select the [Modify] modification option,

re-enter the name of the face library, and click the [OK] button to complete the modification

of the face library.

Face database delete operation step:

Right click the name of the face database to be deleted, select the [Delete] deletion option,

and click the [OK] button to complete the deletion of the face database.

93
10.1.2Face Image Addition

Operation steps:

1. Select the face database to add a face picture, and click the [Add] button to add a person,

as shown in the following figure.

2. Click Next to save the current employee information and create a new employee details

interface.

3. Click OK to save the current employee information and close the current employee details

interface.

4. Click [Cancel] to close the current personnel details interface.

Explain：

 Click the [Local Upload] button to upload a face image (note that this item is required). Note that

the image format is JPG format, the size is between 300 * 300 and 800 * 800, and the size cannot be

greater than 1MB. The image should be kept as clear as possible to facilitate face recognition.

94
  Enter the name of the person corresponding to the picture, which is required.

 Enter the personnel number corresponding to the picture, which is required. Numbering supports

values between 0 and 999999999.

 Other information is not required, and the corresponding information can be filled in according to

the actual needs.

10.1.3Personnel query

After entering the face database management interface, query personnel in the right area,

enter [Name], [Number] and [Gender] in turn, and click the [Query] button to query personnel.

Explain：

 Support query based on name, number and gender.

10.1.4Add Existing Face Image

Operation steps:

1. Select the face database to be added, click the [Add Existing] button, and select the person

to be added, as shown in the following figure.

95
2. Click [OK] to add successfully, and click [Cancel] to close the current personnel details

interface.

10.1.5Delete (All) Face Image(s)

Select the face image to be deleted and click [Delete] to delete the selected face image. To

delete all face images, click [Delete All] to delete all face images.

10.1.6Face Image Import/Export/Export All

Operation steps:

1. Click the [Import] button to enter the import operation interface, as shown below. Click

[Download and Import Template] to download the employee information template.

96
2. You can fill in the personnel information according to the downloaded template content, as

shown in the following figure.

Explain：

 Check [Personnel Information Table] or [Personnel Information Picture (Name # Job No.)], click

[Select File] to import the file, click [OK] to upload the file, and click [Cancel] to close the interface.

10.2 Face database download

Select [Face Library Download] in the face recognition interface to display its function content,

as shown in the following figure.

Explain：

 In the device list, select the channel that needs to download the face database. This channel needs

to support the face recognition function.

97
10.2.1Face library synchronization

After selecting the corresponding channel, click the [Add] button to pop up the [Face

Database] window, as shown in the following figure. Select the face database to be

synchronized, and click [Confirm] to start synchronization.

Explain：

 The synchronization status and synchronization result can be viewed in the current interface. If the

synchronization fails, click the operation result in the [Operation] interface to view the synchronization

failure information, as shown in the following figure. To try to synchronize the information again, select the

synchronization content and click the [Synchronize] button to synchronize again.

Explain：

 Click [Remove] to delete the current face library in the current channel.

 Click [Copy to] to copy to other channels.

98
10.3 Face configuration

Operation steps:

1. After entering the face recognition interface, select [Face Library Configuration] in the

menu in the upper right corner of the left column of the interface to display its function content

in the right column area, as shown in the following figure.

2. You can set whether to enable the face database and set the similarity. The data above

the similarity is valid and can be recognized.

99
11 Access Management

Bayonet preview and information query.

11.1 Bayonet preview

In the access management interface, select the [Bayonet Preview] option in the right

column to display the [Bayonet Preview] video screen in the right area, as shown in the

following figure.

Explain：

 In the bayonet preview interface, you can view the real-time snapshot preview of the bayonet in the

current monitoring area, and you can view the current vehicle information.

11.1.1Device sorting

Click " " on the right to expand the device list. You can set the real-time preview sorting of

100
devices and the displayed devices. As shown in the following figure. Select the equipment to

be moved and click [Move Up/Move Down] to change the display order.

11.2 Bayonet history

Select [Checkpoint History] in the access management interface to display the [Checkpoint

History] list, as shown in the following figure.

Explain：

 In the bayonet history interface, the access area, license plate number and access time can be

101
searched and queried.

11.2.1Access area

In the [Checkpoint History] list, select one of them and click the [View] button to view the

current vehicle access area, as shown in the following figure.

102
12 Electronic Map

Operation function and management of electronic map.

12.1 Electronic Map configuration

12.1.1Add map

Click the [Add Map] button, as shown in the following figure, enter the map name and select

the map picture path, click [OK] to save the current map, and click [Cancel] to close the

current interface.

12.1.2Delete map

Select the electronic map to be deleted in the interface, click the [Delete Map] button, and a

prompt box of the deletion button will appear, as shown in the following figure. Click [OK] to

delete the electronic map, and click [Cancel] to close the prompt box and cancel the deletion.

103
12.1.3Modify map

To modify the map name or map base picture, click the [Modify Map] button, as shown in the

following figure, click [OK] to save the current map, and click [Cancel] to close the current

interface.

12.1.4Add / delete devices

Operation steps:

1. In the user-defined equipment list on the right side of the editing interface, select the

equipment to be added to the electronic map, and drag the mouse to the area where the

equipment needs to be added to complete the addition of the data acquisition channel. Drag

the " " channel device icon to change where you want to add it. When an alarm occurs on

this channel, the " " icon flashes with a red border.

2. Support to add two nodes of alarm input " " and alarm output " " in the electronic map.

The input node will flicker when receiving the alarm of alarm input. The alarm can be

eliminated through the context menu [Eliminate alarm]. The alarm output can be controlled

to open and close the alarm output through the context menu [Open alarm output/Close alarm

output].

3. For devices that have been added, [Added] will be prompted in the custom device list.

104
4. To delete the device, select and right click the [Delete Device] button in the figure, or select

the device to be deleted in the electronic map list on the left, and click the [Delete Device]

button above to delete the device on the current electronic map.

12.2 Configure heat zone

Operation steps:

1. Click the [Configure Hotspot] button to associate other electronic maps on the current

electronic map, as shown in the following figure.

2. Check the electronic map on the left and click the [Move In] button to add the electronic

map to the associated area on the right, as shown in the following figure.

3. Click the [Move Out] button to move the electronic map from the right associated area back

to the electronic map area.

4. Click the [Confirm] button to display the "" hotspot icon on the current electronic map, and

drag it to reset the location of the hotspot.

5. Click the [Cancel] button to close the current interface.

Explain：

 To delete the hotspot, select the hotspot button and right click Delete.

105
12.3 Electronic map preview

Operation steps:

1. Click the [Preview] button to preview the current electronic map.

2. Click the [Full Screen] button to view the preview interface in full screen.

3. Click the [Back] button to return to the previous preview operation.

Explain：

 In the electronic map preview interface, it is supported to manually drag the picture or the mouse

wheel to change the display position of the picture or enlarge the picture of the position.

4. Double-click the device button on the map to open the device video preview, as shown in

the following figure.

5. Right click the equipment icon to pop up the selection box to play the video, play back the

video and eliminate the alarm, as shown in the following figure. Select the video playback to

jump to the video playback interface.

106
107
13 User management

Unified management of client users, add, delete, edit and configure permissions.

Explain：

 The interface displays the basic information of all currently added users.

 Only the Admin super administrator account has permission to enable this function.

13.1 Add user

Click Add in the User Management interface to pop up the Add User window, as shown

in the following figure.

108
The interface parameters are described as follows:

Parameter Instruction

User level Set administrator or operator for current system.

User name Users to fill in any name.

【Note】 There’s illegal character limit when adding user name, following

characters are not allowed to be input ~!#$%^()=[]{},":;'<>?*`+/\&.

Password To set password for newly added user.

Confirm password Needs to be the same as input "Password".

Validity Set the expire date of the authority for users.

Description Supplement and describe user information.

User authority Set the user authority of administrator or operator, such as the authority

of video browsing, audio preview authority ,PTZ control, video playback,

video download, system lock, system delock, intercom, alarm check, etc.

Permissions Set devices permit user authority to apply.

Explain：

 The audio preview permission is mainly used to control all audio opening operations in the platform.

 The audio preview permission, PTZ control permission, video playback permission, and video

download permission depend on the video preview permission. If you want to open any one of the audio

preview permission, PTZ control permission, video playback permission, and video download permission

of a channel, you must open the video preview permission first;

 The intercom permission depends on the audio permission. Only when at least one channel under the

host has enabled the audio permission, can the intercom permission of the host be enabled.

109
13.2 Edit user

Select the user to be edited in [User List], and click [Edit] to pop up the [Modify User]

window, as shown in the following figure.

Notice：

 The related information of the user can be modified in the editing interface, including user level, user

name, validity period, password, description, user authority and authority configuration. Admin Super

Admin user can only modify the password.

13.3 Delete user

Select the user to be deleted in User List, click Delete to pop up a prompt box, click OK

to delete the selected user, and click Cancel to cancel the deletion, as shown in the following

figure.

110
Notice：

 You can delete multiple users at the same time. The superuser admin cannot be deleted.

111
14 Intelligent search

Retrieve the received Intelligent information.

14.1 Face retrieval

Premise:

1. The device channel has a storage medium and is configured with a face detection algorithm.

2. Enable the smart application image collection function in the client [System Settings-Smart

Application].

Operation steps:

1. After entering the [Intelligent Retrieval] interface, select [Face Retrieval] in the rightmost

display bar, and the relevant functions and contents will be displayed in the left area, as

shown in the figure.

2. The user can select any channel in the monitoring point on the left, set the query conditions,

and click the [Search] button to query the detailed information of all the records of the

monitoring point in the time period. Two display forms, list and chart, are supported.

112
3. Click [List] to display the search results in the form of a list, including the snapshot time,

channel name, gender, age, whether to wear a mask, whether to wear glasses and body

temperature. Click [Details] to see the detailed information of the snapshot, as shown in the

following figure. Click [Playback] to see the playback video.

4. Click [Figure] to display the search results in the form of a chart. You can view the details

and playback information of the captured pictures, as shown in the following figure.

5. Select any piece of data in the search results and click the [Export] button to download the

data results to the local. The export results are shown in the following figure.

6. Click the [Export All] button to export all the search results.

113
14.2 Behavior analysis and retrieval
Premise:

1. The NVR device has a storage medium, and the device channel is configured with a

behavior analysis algorithm.

2. Enable the smart application image collection function in the client [System Settings-Smart

Application].

3. This function supports NVR devices and queries up to 32 channels at the same time.

Operation steps:

The user can select the equipment supporting the algorithm in the monitoring point on the

left, set the query conditions, and click the [Search] button to query the detailed information

of all records of the monitoring point in the time period, including the alarm time, channel

name, alarm type, etc., as shown in the following figure.

114
The interface parameters are described as follows:

Parameter Instruction

Start Time The start time of query behavior analysis alarm can be set.

End Time End time of query behavior analysis alarm can be set.

Types of behavior analysis can be selected, including tripwire, double

Behaviors Type tripwire, perimeter, wandering, parking, running, stolen items, and

items left behind.

Retrieve Click to display the search results.

Select any piece of data in the search results and click the button to
Export
download the data to the local.

Select All Click to select all search results.

Reverse election Select all search results except those in the currently selected range.

Details Click to see the snapshot details of the search results.

115
 Click to see the playback video of the retrieval result. If there is no
Playback
video, the real-time preview screen of the channel will be played.

116
15 Data statistics

Face data, passenger flow data and heat map are counted, and the total amount,

proportion and trend of data are displayed through statistical charts and lists.

15.1 Face statistics

Premise:

1. Device has a storage medium and is configure with a face detection algorithm.

2. Enable the smart application image collection function in the client [System Settings-Smart

Application].

Operation steps:

After entering the data statistics interface, select [Face Statistics] in the leftmost column

to display the relevant contents and functions in the right sidebar.

Explain：

 Face statistics support statistics according to age, gender, number of people, whether wearing glasses,

117
whether wearing masks, and abnormal body temperature.

15.1.1Statistics by age group

Operation steps:

1. In the [Face Statistics] function interface, select [Statistics Type-> Age] at the top of the left

column to perform statistics according to age, as shown in the following figure.

Explain：

 Face statistics can be divided into four age groups: youth, youth, middle age and old age.

2. The platform supports list display and chart display, as shown in the following figure.

118
15.1.2Statistics by gender

Operation steps:

1. In the [Face Statistics] function interface, select [Statistics Type-> By Gender] at the top of

the left column to perform statistics according to gender, as shown in the following figure.

119
 Explain：

 [Unknown] Displays [Unknown] when a human form is detected for the device but no face is detected.

 Face statistics can be divided into male, female and unknown according to gender statistics.

2. The platform supports list display and chart display, as shown in the following figure.

15.1.3Statistics by the number of people

Operation steps:

1. In the [Face Statistics] function interface, select [Statistics Type-> By Number of People]

at the top of the left column to perform statistics according to the number of people, as shown

in the following figure.

120
2. Face statistics counts the number of people per hour according to time. The platform

supports list display and chart display. In the graphic interface, click " " to switch to line

chart display, and click " " to switch to histogram display, as shown in the following figure.

121
15.1.4Statistics by whether wearing glasses

Operation steps:

1. In the [Face Statistics] function interface, select [Statistics Type-> Wear Glasses] at the

top of the left column to perform statistics according to the number of people, as shown in

the following figure.

122
 Explain：

 Face statistics are based on whether the inspector wears glasses or not, which can be divided into

two kinds of display: without glasses and with glasses.

2. The platform supports list display and chart display, as shown in the following figure.

123
15.1.5Statistics by whether wearing mask

Operation steps:

1. In the [Face Statistics] function interface, select [Statistics Type-> Wear Masks] at the top

of the left column to perform statistics according to the number of people, as shown in the

following figure.

2. The platform supports list display and chart display, as shown in the following figure.

124
15.1.6Statistics by body temperature measurement

Operation steps:

1. After selecting [Statistics Type-> Abnormal Body Temperature] in the [Face Statistics]

function interface, statistics can be made according to the number of people, as shown in the

following figure.

125
 Explain：

 Face statistics counts the number of people with abnormal body temperature per hour according to

time.

2. The platform supports list display and chart display, as shown in the following figure.

126
15.2 Visitor flow statistics

Premise:

1. The device has a storage medium and is configured with a headcount algorithm.

2. Turn on the picture receiving function in the client [System Settings-Smart Application].

Select [Passenger Flow Statistics] in the [Data Statistics] interface to display its relevant

contents and functions. Passenger flow statistics supports real-time statistics and report

statistics. Real-time statistics can monitor the passenger flow in real time according to the set

area, and alarm when the number of people increases too much. The report statistics can

count the number of people entering, leaving and passing according to the set area, and

display it in the form of list or graph, as shown in the following figure.

15.2.1Real-time Statistics Device List

Operation steps:

1. After entering the [Data Statistics] interface, select [Real-time Statistics] in the middle

127
column, expand [Equipment List] below to enter the equipment list column, enter key

information in the search box, and double-click to locate the passenger flow equipment, as

shown in the following figure.

2. Select the equipment in the list of passenger flow equipment and right click to pop up the

right-click menu of the list of passenger flow equipment, as shown in the following figure.

3. Select [Analysis Configuration] to enter the configuration tool interface to view the current

configuration of each channel, as shown in the following figure.

128
The interface parameters are described as follows:

Parameter Instruction

Analysis channel name Switch channels and analyse the configuration of each channel.

Read the algorithm supported by the front-end device and draw it in the
Mode
right video frame or directly in the video frame.

Sample Display the effect sketch shown in the video box.

Display the maximum size of the target, and the range can be set from
Max. Size of the target
6% to 30%

Display the minimum size of the target, and the range can be set from
Min. Size of the target
5% to 20%

Set the detection sensitivity. The higher the sensitivity, the more
Sensitivity
sensitive it is. The range can be set from 0 to 100.

Video frame Display the video and its algorithm under the channel.

129
 Hide prompt Hide the prompts in the configuration information on the left.

Redraw the statistical area in the video graph.

Redraw the statistical lines in the video graph.

Eliminate the lines.

Analysis channel name Switch channels and analyse the configuration of each channel.

4. Click [Add Device] in the device list to enter the passenger flow camera configuration

interface, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

In the left device list, select the device or device channel. In the right

Import guest flow camera list, select a group, and click to add the device or

device channel to the guest flow camera group.

In the right guest flow camera list, select a group or device channel, and

Export click to delete the group and its device channel or device channel from

the guest flow camera list.

130
 In the right guest flow camera list, select the node and click to add the
Add Group
guest flow group.

In the right guest flow camera list, select a group and click to delete the
Delete Group
guest flow group.

In the right guest flow camera list, select the node and click to modify
Modify Group
the guest flow group name.

15.2.2Real-time Statistics Area List

Operation steps:

1. After entering the [Data Statistics] interface, select [Real-time Statistics] in the middle

column, and expand [Area List] at the bottom to enter the equipment list column. After

entering the area list, you can switch the area scene, as shown in the following figure.

2. In the area list, click “ ” to delete established area.

3. Click “ ” to update the configuration information of present area

4. Click “Add area” to enter the area configuration page to set information of area detection

time, capacity, number of people surge, whether or not to enable alarm, detection device

channel, etc, as is shown in below figure

131
The interface parameters are described as follows:

Parameter Instruction

Set the name of the detection area to facilitate the rapid positioning of
Area name
the area.

Start time/End time Set the time of starting and finishing of statistics.

People capacity Set the upper limit of the capacity. This is required.

Rapidly increased number Set the upper limit of the increase of the number of people in the unit

of people time (10 minutes, 30 minutes, 1 hour, 2 hours). This is a required field.

Alarm interval Set alarm interval, supporting 10, 20, 30, 40, 50, 60 minutes.

Number of people staying Set the current number of existing people.

Set the detected channel video to be detected. Multiple channel videos

Add
adding is possible.

132
 Select the channel video to be deleted. Multiple channel videos deletion
Delete
is possible.

15.2.3Real-time Data of Real-time Statistics

Select the area to be viewed in the area list, and the configuration information of the area

can be viewed at the bottom of the interface, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Recount Click to eliminate the recorded number of people.

Peak Record the maximum number of people in current area.

Record the number of people at current time. If the number exceeds the

Current number of people one that can be accommodated, it will turn into a red box; otherwise, it

will be a green box.

Record the number of people in three status namely entering / leaving /

Enter/Leave/Passing passing by. At the same time, the color of each case is distinguished.

Red colour represents entering, green leaving, and blue passing by.

The number of people is displayed in real time according to minutes.

Real-time Line Chart Red represents entering, green represents leaving, and blue represents

passing.

133
 Capture, capture picture save path can be changed from [system

settings] > [common settings] > [path settings].

Start all videos. The video download and save path can be changed

from system Settings > Common Settings > Path Settings.

Set the number of pictures, supporting picture display amount 1, 4, 9,

36, 49, 64.

Full screen, full screen display of video page and real-time data page.

Click again to cancel the full screen.

15.2.4Video Page of Real-time Statistics

View the video effect of real-time preview in video page, as is shown in below figure:

Explain：

 See the [Video Preview] window for relevant Parameters of the interface.

15.2.5Report statistics

Operation steps:

1. Count the number of people in a selected area in the report statistics interface. It supports

the statistics of the number of people entering, leaving, and passing by according to detailed

134
time, as shown in the following figure.

2. Select the report type and statistics time. If you want to make statistics by detailed time,

enable the Detailed Time check box. During statistics, the number of people in the detailed

time period will be displayed. Click Export to export the statistics data to the local machine,

as shown in the following figure.

135
3. Data can be displayed in list form and graph form. Graph form supports line chart and

column chart, as shown in the following figure.

136
15.3 Heat map statistics

Premise:

1. The device has a storage medium and is configured with a behavior analysis-heat map

statistical algorithm.

2. Turn on the picture receiving function in the client [System Settings-Smart Application].

Operation steps:

After entering the data statistics interface, select [Heat Chart Statistics] in the leftmost

column, and select the corresponding equipment in the equipment list to display its related

contents and functions in the right sidebar, as shown in the following figure.

Explain：

 Heat map is to show the distribution of people in each part of the screen with the color of heat. A

detection area is set to detect the active information of personnel in the specified area. Through the heat

chart report, the personnel distribution can be visually presented in terms of time or space.

137
138
16 Alarm configuration

Configure linkage for various types of alarms.

16.1 Alarm configuration of Monitoring point

Operation steps:

1. After entering the [Alarm Configuration] interface, expand [Monitoring Point] in the left

column to perform the operation of monitoring point alarm configuration, as shown in the

following figure.

2. Select the channel to set the alarm at the monitoring point on the left, and the alarm type

supported by the monitoring point will be displayed, as shown in the following figure.

139
3. Click [Alarm Level Setting] to modify the alarm level. The alarm level is divided into

emergency, high level, medium level and low level. The alarm types in different level boxes

can be dragged to other levels, as shown in the following figure.

4. Uncheck or check the alarm level to filter different alarm levels, as shown in the following

figure.

140
5. Uncheck or check the alarm level to filter different alarm levels, as shown in the following

figure.

6. After the channel and alarm type are selected, the alarm linkage can be configured, as

shown in the following figure.

16.1.1Linkage notification

Operation steps:

1. Enable alarm linkage. Alarm linkage is a general configuration item. If it is not enabled,

even if notification and linkage video are configured, alarm linkage will not take effect.

141
2. Enable automatic saving of alarm pictures. Before enabling this function, it is necessary to

ensure that the equipment alarm linkage is configured with linkage snapshot, and the client

has enabled the function of collecting pictures in [System Settings-Intelligent Applications].

3. After the alarm sound is turned on, when an alarm occurs, the computer where the client

is installed will play the alarm sound. You can use the default sound or upload the voice by

yourself.

4. After the bubble prompt is turned on, when an alarm occurs, the client will pop up an alarm

prompt box in the lower right corner.

5. After sending mails is enabled, when an alarm occurs, an alarm mail will be sent to the set

receiving mailbox. The configuration is shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

142
 SMTP service Configure the E-mail server address.

Port Manually fill in the server port.

Encrypton method Point encryption methods, including SSL and TSL.

User name Configure sender E-mail name.

Authorization code Configure sender E-mail authorization code.

theme Manually fill in the subject of the message.

Receiver Configure the recipient E-mail address.

CC Configure the CC mailbox address.

16.1.2Linking video

After setting the linkage notification, click Next to set the linkage video.

Linkage video means that when an alarm occurs, the real-time video screen of the configured

143
channel will pop up, as shown in the following figure.

Linkage video recording means that when an alarm occurs, the configured channel will record

the video, and the video recording duration can be set.

16.1.3Linkage alarm output

After setting the linkage video, click Next to set the linkage alarm output. This function can

only be used after the open linkage is checked. Linkage alarm output requires that the

equipment supports alarm output and has an alarm output port. The equipment can realize

the specific alarm function through the external alarm. The IPC generates an alarm and

transmits the signal to the alarm, and then the alarm takes effect. Commonly used alarms,

such as external alarm lights, alarm bells, buzzers and other equipment, are connected to

the ALARM OUT interface of the equipment. The signal type is divided into open and close,

that is, the open and close of the line, as shown in the following figure.

144
16.1.4Linkage deployment time

After setting the linkage alarm output, click Next to enter the linkage defense time

configuration, and configure the effective time for the linkage mode, as shown in the following

figure.

145
Click the [Copy to] button in the upper right corner of the linkage deployment time to copy the

set linkage mode to other channels, as shown in the figure below.

146
16.2 Alarm configuration of device

Operation steps:

The alarm types supported by the device are shown in the following figure, and the

specific operation is the same as the 16.1 monitoring point alarm configuration.

147
16.3 Alarm configuration of People counting area

Operation steps:

The alarm types supported by the passenger flow area are shown in the following figure,

and the specific operation is the same as the alarm configuration at the 16.1 monitoring point.

148
17 Operation logs

Query the operation log of the system to understand the usage of the system, as shown in

the following figure.

Explain：

 Support query of login log, operation log and configuration log.

The interface parameters are described as follows:

Parameter Instruction

Starting time Available to set the starting time of log query.

Ending time Available to set the ending time of log query.

User name Available to query the operation record of one user. Admin-super

administrator user may check the operation record of all users.

Log Type Available to query logs by type, including all, login, operation and

configuration.

149
Detail Type Available to conduct detailed classified query of all, login, operation and

configuration by type.

Log description Search key word to query log information.

Export Logs Click Export Logs, available to output and save logs.

Query Click Query, available to query logs according to query conditions.

Reset Click Reset, to restore query conditions to default status.

Total X Pages Display how many pages does the query result has.

To X Page Select a page to jump to the log record on that page.

150
18 Video player

Play the local playback video, as shown in the following figure.

The interface parameters are described as follows:

Parameter Instruction

Local video can be selected for playback.

Step button. Click it to play the video file frame by frame, but the player
/
does not support this function.

Slow button. Click it to slow down the video file.

/ Play/Pause button, click to control the start/pause of the video file.

Stop button, click to stop the current video file playback.

Fast-play button, click to fast-play the video file.

You can adjust the playback speed of the video. The available playback

speeds are 1/16 X, 1/8 X, 1/4 X, 1/2 X, 1x, 2 X, 4 X, 8 X, 16x.

151
 Full Screen button. Click it to display the playback window in full screen.

Press the ESC key to turn off the full screen.

Volume adjustment bar. Drag to adjust the volume of video playback

sound. Tap the speaker to turn the sound on/off.

Click to view recently viewed video files.

/ Zoom in/out on the current player interface.

Close the player.

152