Scribd
Upload
12 views

Vintec-Clear-PVC-Data-Sheet

Uploaded by

Sigma male
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Vintec-Clear-PVC-Data-Sheet

Uploaded by

Sigma male
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Typical Physical Properties: Vintec® Clear PVC

Units of ASTM
Property Measure Value Method
Physical
Density g/cm3 1.4 D 792
Water Absorption % <0.07 D 570
Rockwell Hardness R Scale 115 D 785
Shore Durometer D 80 D 224
Mechanical
Tensile Modulus psi 426,00o D 638
Yield Strength psi 7,500 D 638
Flexural Modulus psi 480,000 D 790
Yield Strenght psi 12,000 D 790
Izod Impact Strength ft-lb/in of notch 0.9 D 256
Thermal
Vicat Softening Point °C/°F 82/179 D1525
Heat Deflection Temp (66 psi) °C/°F 74/165 D 648
Heat Deflection Temp (264 psi) °C/°F 86/154 D 648
Coefficient of Linear Expansion in/in/ºC 6.7 x 10-5 D 696
Coefficient of Linear Expansion In/in/°F 3.7 x 10-5 D 696
Flammability Ratings
Flame Spread Index — Class 1 BS 476/7
Flammability — 0 UL 94V
Flammability — Self Extinguishing D 635
Chemical
Chemical Resistance - Class B D1784
Electrical
Electrical Volume Resistivity Ohm/cm 6.0 x 10-5 D 257

801 E. Corey Street, Scranton PA 18505


Phone: (800) 235-8320
Fax: (800) 858-9266
www.vycomplastics.com
Physical properties of plastic sheeting are represented as "Typical". Information contained herein is considered accurate to the best of our knowledge.
It is offered for your consideration and investigation, and is not to be construed as a representation or warranty expressed or implied. Our warranties
are limited to those expressly stated in formal contracts or in conditions of sale on our invoices and order acceptances. Conditions and methods of
use may vary and are beyond the control of Vycom; therefore, Vycom disclaims any liability incurred as a result of the use of this product in
accordance with the data contained in our physical property charts. No information herein shall be construed as an offer of indemnity for infringement
or as a recommendation to use the products in such a manner as to infringe any patent, domestic or foreign.

The "Typical" properties of our plastic sheet cannot be automatically used when engineering finished components; and the fabricator or end user is
responsible for insuring the suitability of our products for their specific application or end use!

UL® is a registered trademark of United Laboratories.

1-888-CURBELL
www.curbellplastics.com
January 1, 2012

Curbell Plastics is a proud supplier of Vycom materials.

You might also like