Register No: Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam — 603 110. (An Autonomous Institution, Affiliated to Anna University, Chennai) B.E. / B.Tech.End Semester Theory Examinations, November/December 2023. Fifth Semester Mechanical Engineering UME2525 GEOMETRIC DIMENSIONING AND TOLERANCING (Regulations 2021) (Approved PSG Data book and calculator are permitted) Time: Three Hours Ki: Remembering _K2: Understanding K3: Applying Ké:Analyzing, ‘Maximum:100 Marks KS: Evaluating Cor: Identify and summarize Geometric Dimensioning and Tolerancing symbols on drawings (K2) co2: Expl (K2). lain the similarities and differences between coordinate and geometric dimensioning and tolerancing C03: Explain three-plane concept and application of datum to appropriate surfaces (K2). COM: ‘Summarize tolerances of orientation and profile (K2) cos: Explain location tolerances and tolerances of runout (K2) Part— A (5 x2 = 10Marks) KL| CO | PI 1. | What does ASME Y14.5 M-1994 stand for? K1 | COl | 13.1 2. | List the benefits of the datum system. K1| Coz | 141 ‘mentite de cc — 3, | Differentiate the circularity and cylindriity with the neat x1l cos | 24 sketch. 14.1 4 | Describe the terms “true profile” and “profile tolerance”. K1| cos | 141 5. | What is total runout? How itis varied from circular runout? | K2 | cos | 13. Part—B (5 x 6=30 Marks) KL] CO | Pr Explain MMC, LMC and their benefits. How they are 5 6. oan ag cee k3] col | 134 measured quickly in industries? 23.1 Explain the importance of datum feature control frame in part 7. 5 K2] C02] 141 drawing. 8. | Discuss the Rule #1’s effect on cylindricity. K3[ C03 | 132 Explain the procedure of inspecting the angularity in 9. | OP K2| co4 | 231 components.UME2525 Explain the profile control used for tolerancing a conical 131 "| feature. 23.1 Part —C (5 * 12 = 60 Marks) PI 11. | Explain the Rules of GD & T with the suitable example 13.1 (Or) | Ta) Explain the various engineering fit used for component | | assembly. | |b) Find the nature of fit between the serew jack body and nut shown in figure 1. | | 13.1 | 12. 141 | 23.1 | || Figure 1. | 13, | Explain the concept of datum shift with suitable example. 13.1 (Or) 14, | Explain the effect of specifying the MMC and LMC modifiers - 14d in datum feature. UME2525 2UME2525 Discuss the various form controls associated with the drawing shown in figure 2. Draw the final output drawing after implementing the form tolerances. jem 13.1 15. K4| co3 | 14.1 \en Figure 2. (Or) 16, | Explain the various form tolerances and their measurement with | 4 | 65 the suitable sketches. 13.1 17, | Explain the procedure of inspecting profile ofa line and profile | 4 | 4] 1 44 © | ofa surface. (Or) meaGl 13, | E*plain the profile control used for tolerancing polygon and a) £4) G4} 131 conical feature. 19. | Explain the various location tolerances with suitable examples. | K4 | COS | 13.1 (Or) 20. | Discuss the total runout and circular runout with the neat sketch. | K4 | COS | 1.4.1 UME2525 3